Epson ET 2760 - Not Printing Color/ Black - Printer Error Fixed - How to Clean Printhead
HTML-код
- Опубликовано: 9 июл 2024
- Printhead Cleaning Kit (CLICK HERE TO BUY!): geni.us/wArXsZT
Epson 502 INK: geni.us/O9Y0hO
Support Website: bestprinterstech.com
Phillips Screw Driver: amzn.to/2XEmcSZ
Epson ET-2760: geni.us/et2760
EcoTank Use Instruction, Must Run A System Power Cleaning After Using The Cleaning Kit:
Power Cleaning Using the Product Control Panel:
You can run a Power Cleaning using the control panel on your product.
Note: After a Power Cleaning, you must turn off the product and wait at least 12 hours before running another Power Cleaning.
Turn off the product.
Visually check the ink levels and make sure each ink tank is at least one-third full.
Caution:
If you run a Power Cleaning when the ink levels are low, you may damage the product.
Press and hold the power button and the help button at the same time until you see the Power Cleaning screen.
Follow the instructions on the LCD screen to run the Power Cleaning.
When the Power Cleaning is finished, run a nozzle check.
If the print quality did not improve, turn off the product and wait at least 12 hours before running another Power Cleaning.
-Epson.com
epson.com/faq/SPT_C11CG22203~...
Disclaimer
Some links may be linked to an affiliate marketing account and Best Printers may take a small commission for any products you purchase. We are not sponsored and companies do not provide products that we review. All products on our channel have been purchased.
Claims made in repair videos are deemed reliable but not guaranteed. Each situation is unique and your printer may not be repairable. Brandon or Best Printers cannot be held liable for any damage caused to printers from the use or misuse of these instructions.
All Links above are resources to either a cleaning kit, printer, ink or other items/ services that we hope are helpful to you as the consumer. We wish you the best of luck with your printer repair and product purchase!
®2024 Best Printers LLC. 
Хобби
![Sean Rii, Karyon, Sharzkii - Taungule [My Love] (Official Music Video)](http://i.ytimg.com/vi/eJoMuypbSzQ/mqdefault.jpg)
Brandon, I happened across this video and am so glad I did as I was about to toss my $400 printer. Took a chance and bought the $25 investment in the "Best Printers" solution and it paid often!!!! Instruction was perfect and I followed it straight through, pausing at every step to perform. You are awesome and hope others with the problem will try your solution before ditching expensive printers. Thanks again!!!
Connie, I am so glad to hear the kit worked for you! It is a great investment as you said!
How do I do that?
Hey Brandon, I have a Epson 2720 and it’s giving me a hard time to open it. Can you please help?
Hello all: I'm glad I found this gentleman's youtube for EPSON's printer issues. I followed his instructions, ordered his cleaning kit, and did exactly what he did-except I did used gloves. It's important to follow through with the full instructions. Which includes doing the power clean at the end. I'm 68 and it's good to see how smart and helpful our youth have become. I saved about $400 by following this young man's instructions. Consider purchasing the kit rather than using household items like gasoline, vinegar, dish soap, liquid Tide, bleach etc. (just fun'in). Buy the kit and get it done right the first time.
Greg G
Apple Valley, Ca
Greg, thank you for the comment! I am glad you were able to save all that money and found the video helpful. I am glad you used gloves I have the bad habit of not using them. Thank you again and God Bless.
Just spilled this chemical on skin and leather and it destroyed the latter, so gloves are a wise choice. No info on what the chemical is on either the webpage or on Amazon, so...
Thank you! I did everything because my printer was only printing black even when the other colors were full and now is working perfectly! I really appreciate your help!
Awesome!
Worked like a charm! Thanks Brandon!! You saved me a pile of cash, not having to replace my printer.
Thank you so much for making this video! My printer was printing with only black ink. It took two tries to unclog the print heads for the CMY, and my printer is working perfectly now.
Awesome!
Thank you for getting right back to me. This video is great for me to clean my printer. Can’t wait for my cleaner to get here.
Great!
Helpful video. But I realized that before using this cleaning technique, and kit, for a clogged printer head, it is useful to FIRST try the Epson Power Clean function (the last step in this video). I was unaware of that function. I have this printer and could not get a clean printer check after using the normal printer head cleaning step in the Epson Maintenance screen. I got black printing, but terrible color printing. I kept getting broken color lines. After viewing this video, I started with the Power Clean function and everything cleared up. I suspect the kit and technique in this video are only necessary when Power Clean does not work (i.e. seriously clogged printer head).
Yep mine would only print black, did a power clean, works great, printed a couple times after that to clean it all up and just like new again!
Thank you so much for mentioning to power clean first. It worked without needing to use the cleaning solution.
Came here to say the same thing. Watched the whole video first and tried the last step first and it cleared things up with the inks that wouldn’t print. Saved myself $25 for the kit.
With that said, great video tho. There’s so many videos on ecotank fixes with the same useless information, none of which covered the power clean. Appreciate the video.
Thanks for the comment
I tried doing a power clean and filled the levels and when I tried to run power clean, it would say the levels are low….so I’m running a head cleaning again
I appreciate this video and nice clear instructions. However, for my situation...I just did the power clean mentioned at 7:12. This completely resolved my issue with the printer not printing color and lousy black and white printing. After the power clear function, I also ran the nozzle check, vertical alignment, and horizontal alignment. It's printing like new again and with no messy cleaning. Not sure if this will work for others, but it's worth a try before indulging in the more arduous cleaning process.
I also did the power cleaning and quickly resolved my issues. Others quoted not to do the power cleaning quite often. Thanks for your video though cause I did not know about the power cleaning functions until you mentioned it.
Thank you for your comment! You just saved me so much time! Printer is fixed!
Thanks much ; detailed step by step method and recommendations - worked for me exactly as shown -- no issues or challenges ; family happy now - they are printing to color again
Great to hear! Consider subscribing to my channel and leaving a 5 star review on Amazon.
@@BestPrinters - I had already did the review on Amazon ; just subscribed -- regards
I was skeptical, but this works! Cleared up our printer that suddenly stopped printing magenta a few months after we bought it. Do not skip the 10 minute power clean at the end. Thanks for the guide and simple-to-use product.
Thanks for sharing!
How odd, mine stopped printing magenta too, but the power cleaning worked.
Thank you so much! I purchased the kit and did exactly what you said. It’s working beautifully.
That is awesome!
Thank you! Mine was missing lines when printing in black ink. The maintenance setting to clean the print nozzle worked for me this time. I am saving your video incase I ever need it. A friend warned me that you need to print often on these machines so that they do not clog. I'm giving a final exam tomorrow, and I can't count on the printer working after I commute in, so I want to make sure that I have them printed. I was imagining a trip to Costco. Your video rocks! Thanks!
I am glad this video helped, thanks for watching!
Best video! I hate a 20 minute vid when 10 minutes will do. I almost threw away my Epson 2760. Only used it 16 times and it sat for almost 9 months - I converted it for sublimation. Was ready to get started again and two of the colors were not printing. I got a cleaning kit, follow the directions, did nozzle check afterwards and it was like brand new! So thankful I came across your video!
Awesome!
Thank you so much for this video. Although I didn't perform my entire process as gracefully as you did, it worked perfectly! I followed along with you on your video, starting and stopping as I went through the process seamlessly. Thank you so very much for your descriptive down to the T instructions.
You're welcome! Thank you for the comment!
Thank you so much for this video. Previously, I had purchased your printhead cleaning kit and failed to perform the power cleaning step. Printer only printed in black. After watching this video, I was able get all colors printing again!
Awesome!
Diane
I procrastinated to clean my printer for several months (my tech guy said to get rid of the printer). So, I finally went through the steps and it all went very well. When I tried to do the power cleaning it wouldn't work, so I reviewed the steps, you need to ensure your ink levels are more than 3/4 full. Once I filled my tanks, the power cleaning proceeded. Thank you for this solution, you saved me from buying another printer.
Great job!
Brandon, Your video was just the guidance we needed. Our printer stopped printing black color and we had no clue what to do , tried to look for maintenance guys, but no one will repair inkjet printer.. finally we saw your video and did exactly what you described here to clean the printer head and now it is WORKING 100% . Thank you so much for the simple video and you really saved us some $$$ .. best wishes..
I am glad to hear that!
Wow!!! I am so impressed!!! My printer quit after only 50 or so prints...went to dealer and they basically told me to get stuffed!! so I followed this video to the letter and It now functions as it is supposed to. This printer costs over $400 in Canada so being able to fix this problem is HUGE!! Thank you SO much
You got it!
This is one of the most helpful videos!! Love it is to the point and step by step! Thank you!!
Glad it was helpful!
THANK YOU SO MUCH BRO. I LEFT MY PRINTER AT MY HOUSE FOR 8 MONTHS WITHOUT USING IT. I THOUGHT I HAD TO BUY A NEW ONE. THIS VIDEO WORKED ON THE FIRST TRY. YOU ARE THE MAN. APPRECIATE THE HELP BRO.
You are welcome!
Used info from this video on ET-2760 that was not printing at all. Power cleaning fixed all three colors. Injecting fluid was required for black nozzle. The printer is now working PERFECTLY! Great information!
That is excellent news!
THANK YOU THANK YOU THANK YOU!!! It worked! I hadn't used my brand new printer regularly for months and when I needed it, it wouldn't print color, well, just one color. I came across your video and thought, okay I should try this. I'm so glad I did! I bought the $25 kit and followed your exact steps. I also let the printer air dry for 24 hours in between master cleanings. I'm so very grateful to you! Ive been printing massive amounts of color pages with no issue. THANK YOU AGAIN!!!
You're welcome! I am so glad this worked for you!
You gave clear direct instructions that I could easily follow along and it worked perfectly!
Thank you!
You're welcome!
I did it as shown in the video, and then I did deep cleaning, it worked, Thank you very much!
Your help and teachings have saved me much frustration. This site and its ideas worked like a charm, thank you
Great to hear!
Did the power cleaning for the first time and did not get the kit this time... 2 yr old printer. Everything cleared right up. Thanks!
Thank you so much! I followed your instructions step by step and it worked beautifully.
Great to hear!
My ET-2760 stopped printing the Cyan. Found this video watched it to the end. I was going to order from the provided website but could not find where the item would be shipped from, so I looked at Amazon Canada, sure enough they handle the product and with a 2 day delivery. I print papers for a group of 20 - 30 people on the weekend so time was a factor. Prime delivered this afternoon about 16:00 local time. Re-watched the video collected all the needed items and was finished by 17:10ish. I found that using a pair of 6 inch hemostats helped to get the plastic tube on the receiver tip. Flushed it twice (20cc each flush) did the power cleaning and all is back to normal. Thank You Very Much.
Awesome!
Wow. Seriously thank you so much. My printer finally work!! You saved me money and my printer hasn’t work since February and now it works!!
That is awesome to hear! Make sure to leave a positive review on the cleaning kit if that is what you used.
Thank you soooo much! It worked!!! I ran the head cleaning more than 4 times and did not work! But this solution was perfect! Thank you!
Awesome! I am glad it worked!
Thank you, Brandon. Absolutely positive experience. I appreciate your training video and clear, concise directions. Great job!
My pleasure!
🎉
Absolutely Flawless!!! Bought the cleaner and she's as good as new!!!
Amazing! Please the product a 5 star review if possible, thanks!
Thanks so much for making this video! Your instructions helped me get my Cyan back! Printer is printing correctly again! Yay!
Yes!
Additional comment. Only my Blue wasn't printing. I followed your video, but I only put a few drops on the Blue nozzle. Instead of replacing all the ink. This fixed my problem with Blue. I didn't run the Deep Cleaning.
Brandon, bought the Best Printers printhead cleaning kit, followed the video instructions, including the power cleaning and Voila! The nozzle check was back to normal. I only did the nozzle color that was not showing on the pre nozzle check, so I have the cleaning kit on hand if it happens again. Thanks for the info and product!
So great to hear that!
Fixed a used 2760 printer I bought. Works perfectly now using this kit.
Awesome!
Yey! The Power Cleaning mode fixed my issue! Easy fix, thank you!
Great!
This video was very helpful. Thank you!
Glad it helped!!!
Perfection. Thank you for taking time to do this video.
You're welcome!
You were on point! It worked perfectly. Thank You!
Awesome! Thank you for watching!
I didn’t have the kit , however the power cleaning was magic 😊 thanx so much
Glad it helped!
This was a life saving tip! 🥰
That’s why they call me printhead doctor.
It worked! Thank you very much for the power clean.
You're welcome!
Thanks for these clear, easy instructions. It fixed my printer right up!
Great to hear!
Thank you for the great video, this solved my issue and the printer works like new! Appreciate it!
Glad it helped!
thank you, the power cleaning was all I needed thank you.
Nice
Me estaba sintiendo mal por escuchar y ver tu video y haber usado una solución de otra marca pero lo corregí con una pequeña contribución en tu cuenta de RUclips, tu explicación es extraordinariamente buena! Tan pronto seguí tus instrucciones hice el “power cleaning” y luego imprimí un mapamundi con todos los colores, increíble! Y yo ya pensaba botar la impresora, gracias nuevamente!!
Muchas gracias amigo, te lo agradesco!
thanks this worked!
It worked! Great video easy to understand and follow, thanks.
Glad it helped!
Brandon, thanks for this. Yup, this all worked after 97% failure on all colors. Generally speaking we tend to always print in B&W unless color necessary. In the future I think we will employ more regular use of color as perhaps the long periods between using color probably leads to older ink sitting in there and clogging up.
Couple of notes I came up with along the way.
- How much paper towel? I had success with a whole 1/2 sheet. You know how some paper towels come perforated as half sheets? I used one of these. I tried 2x 1/2 to make a full regular sheet but it bound up under the nozzle head carriage despite good folding etc. Be careful you don't have any torn edges facing up as these can tear and leave bits that could I assume get in the works.
- 1 full 20 ml syringe is a lot! So I switched out the paper towel for each color. And also used a dry one in between changing to dry things off and soak up any left overs.
- I also moved the carriage along the towel as I pushed the syringe. This spread the 20ml out along the whole towel and it was still soaked! But in doing this you can see how dense the color is at the beginning and confirm that by the end it's relatively clear of color.
- NOTE - with the linked 100m bottle and 4 passes (Blk,Y,MC) you're pretty much done with the bottle. So Brandon's note of Flush as much as you want only holds if you bought more than 1 bottle. 1 bottle gets you 1 flush on each color, with a bit left over if you need to hit 1 particular color again.
- But as I said, with only a couple of dashes of magenta showing up on the 1st Nozzle check, every color came back to 100% after following your good instructions.
Thanks Again!
Yes, your notes are a very good guidance when it comes to fluid control. It can become messy if you dont remediate the way you did. Excellent job!
Thank you for posting the video!
My pleasure
So very helpful. Thank you so much for your help.
Thank you for the great Tipps 🎉
You are so welcome!
You helped fix my issue. Thank you Everything is working great
Great to hear!
Thank you so much! This fixed my printer.😀
You're welcome!
thanks for the great video and the great help bro
Did the nozzel check a few times, then the power cleaning, to see if that would clear up the issue of no cyne color coming out properly. Followed your instructions, with a final nozzle check print out, and it worked wonderfully!
Thank you so much for doing these videos and helping us... I had really been stressing out to find out what was causing the problem and how to remedy it.
And at some point if I need to do the manual cleaning on the heads, I will order the cleaning solution you recommend on Amazon.
With much appreciation winging your way!
Bless your heart, Brandon🙏💗...
Thank you for your support, I am glad you found a solution!
Thanks for the instructions, this looks great. I am reading elsewhere that you can only power clean 2x for the life of the printer because the waste tank that the printer dumps the ink into is molded into the bottom of the printer and cannot be emptied or replaced. is there a way to avoid the power clean at the end of the process you describe?
Thanks for the clear instrutions. One issue that came up was the paper towel got saturated and tore a piece off when I removed it. It was under the print carridge. I did manage to get it out, but If I had not noticed, it would have caused problems when I started to printing again. Perhaps there is something else to use to catch the ink.
Brandon ,Thanks a lot, my et-2760 only was printing in pink, I press (Power & ?) and magical solution. Thank You Very Much.
Of course.
Thanks very much for your video. Have Epson ET-2760 that's only 1.5 years old and is not printing color! Even though YMC tanks all 90% full. Already done basic things via menu.
Awesome!
Worked for me - thanks so much!
Great to hear! Consider subscribing to my channel
Worked perfectly! Thank you so much!
You're welcome!
Very easy to follow! My printer is cleaning right now... wish me luck..it hasnt printed a perfect nozzle check since i got it. Thank you!!
Glad to hear it!
So what was the outcome?
@@soniarivera3866 It worked!
Do you have a video on how to clean the ink cartridges on ecotank 2760?
THANKS FOR THE HELP. GOD BLESS.
Hi Brandon! Thanks for your video. I have a question; my 2760 doesn’t feed up the ink from the tank through the tube to the cartridge. I have full tank of ink but my cartridge is empty. How can I fix this problem. Thank you 🙏
Thanks, worked, great video, thanks for your help.
You're welcome!
I got lucky. I simply hit the power cleaning option and it did the trick. Still thank you for the video. I saved, thumbs up and subscribed.
Nice job!
Thank you!!! Working like new.
Great!
This is a great video and I learned some very neccesary information from it.. Kudo's to Best Printers
Thanks!
Worked for me. Thanks!
Awesome!
That's really works, thank you so much.
You're welcome!
Waiting on the Power Cleaning to finish, just tried out this product. Can't wait to see how well this work's. I didn't really print much using this printer which is probably why my ink's were not showing up as much as they should of. Hopefully this solves my issue.
Thank you for the purchase! Let me know how it goes.
@@BestPrinters Works great now!! Thanks for making this product now if it happens again I'll know what to buy and where to find it again. :)
Thank you for the help flushed them all out and ran a test only black run power clean worked perfectly and I was going to throw the printer out so you saved me about 400.00 bucks thanks again
Awesome!
Thank You! Fixed my issue
Great!
Thank you for the info.
You bet!
thx for the video and recommodation. I could solve the printing problem I had with my Epson ET-2700
Great
What do you do when it’s the horizontal alignment that’s off and all the choices for the horizontal alignment test page are bad?
Thank you, work first time
Awesome!
Good vid. Gonna try it and see.
nice
Millions thanks
It works👍
Of course!
My Eco Tank 2760 Printed letters all double lines, flurry, still can print. What is the issue. I tried nozzle check, self maintained many times, still has the same issue. Do you have suggestion? Thanks
Thank you so much!
You're welcome!
that was an awesome -- much appreciate it
Great!
I know that this is an order video but hopefully u see this what if I can’t get the solution to go thru the nozzle head?
Hello ! I did the exact cleaning as you , and when i put my epson through powerhouse cleaning, it turned off during and then it was kind of warm inside, now its not turning on , any advice ?
Your tutorial helped, but I was able to fix it by topping up all my inks. Then running the Nozzle check, head cleaner a few times. I unclogged my colours for me. I will remember to print at least once a week going forward.
Do I always need to have the ink to the top? or especially this time to clean?
To use the RUN POWER CLEANING it has to be only after cleaning?
Do I need to fill the ink before I start cleaning?
Yes
Hi Brandon, I only had a black ink not printing problem on my Epson ET2710 so did your cleaning exercise and followed all the instructions, the black ink still not printing all colours absolutely fine, could it be a software problem, any advice would be most welcome, thank you for a great comprehensive video
It is definitely the black nozzle, make sure it is fully cleaned and run a power cleaning.
This worked to fix my printer. Is there a refill for the solution? I have another epson printer, that needs the same maintenance, and have the kit, just need more solution.
You have just solved a problem I had. I just bought the ET-2760 yesterday. The instructions that came with the printer are lacking - being kind. When I initialized the printer I didn't have enough ink in the reservoirs. The reservoirs attached to the secondary nozzles never filled. I filled the reservoirs and couldn't correct the problem until I saw your explanation of Power Cleaner on this video. I gave you a thumbs up and subscribed. Do you have a video that talks about resetting the password for wireless printing?
Thank you for subscribing and liking the video! I am glad you found out what you needed to do. Currently I do not have a video on resetting passwords for wireless printing.
Hi Brandon i was wondering if this method works for an epson ET-15000 converted to eco solvent ink??
Yes it will!
As I was reassembling the print cover I lost/dropped the screw for the print head cover down into the bottom of the machine. Do I need to replace it? if so, do you know its size?
Yes make sure to replace, you will need to buy a multi size small electronics srew kit from Amazon.
you are a life saver
They call me printer savior
What can I do about the Printer not refilling one of it's cartridges inside. All colors are full except yellow. It's completely empty. Only Ink Charge in wicreset helped so far, but is there a better solution?
I thought my printer was total loss. Took a couple days to get the kit. All colors were bad and black was starting to skip lines.
Process went according to plan and now it it fine.
I would like to see Mr. O'Neal perform this operation with his big hands.
Awesome, yes I would like to see that lol
Thank you soooooo much
You're welcome!
How did you get the top of the printer off so you can have access? when I open mine it is only open to a narrow degree and it is hard to reach inside.
You may have to remove some screws.
Thank you so much! I was about to toss it!
bought one thankyou
Awesome, good luck!