Can you mount a Tunomatic bridge on a Telecaster or Stratocaster
HTML-код
- Опубликовано: 22 фев 2024
- Are you looking to put a Tunomatic style bridge on a guitar that isn't designed for it? Let's talk about what you need to know in order to make that work.
Find some of my favorite products: www.amazon.com/shop/bradangove
(commission link)
Check out the guitar kits and luthier tools I use: www.solomusicgear.com/?ref=1512
Support the channel: / bradangove
Or by PayPal donation to: Brad@Angove.biz
Follow me on instagram: / brad.angove
Follow my Facebook: / bradangovepainting
My favourite spray guns: www.warwickspraytools.com/dea...
Don't forget to ask your questions in the comment section.
Thanks for watching. 
Видеоклипы
I actually go the other way. I take guitar kits that use Tune-o-matic bridges and make them string thru. I made up a jig that I use my router on and clamp the neck in place and reduce the angle to almost zero. I take measurements and adjust each neck due to quality of the kit. I just like the thru body setup and have now changed almost all my kits.
Bigsby used to sell a shim to use when mounting one of their tailpieces on a Tele with a Jazzmaster / Jaguar bridge. They probably still do. It’s not too tough to make one either.
I did exactly this when adding a bigsby to my Tele. Glad you have confirmed my approach. 👍
I hope it worked well for you.
Thanks for the video Brad
Cheers Dan
God to see you do relaxed Brad!! Been following you for a long time. You’ve helped me a lot with building, finishing, etc.
Thx!
Glad I could help!
Very informative Brad. Thanks, I always enjoy your videos and your knowledge!
Thank you Tom
I cut a negative shim from my heel (after removing a tiny wedge from the front/bottom tip of the neck), this allowed me to keep the break angle without raising the neck with traditional shims.
What's a 'negative shim'?
It's what I call the space left after removing a shim's worth of material.
The only problem with introducing a break angle is there's now too much wood in the foot of the neck, and it pushes the scale out of alignment, so a tiny wedge needs to be removed to bring the last fret back where it needs to be, and then it's a case of re-drilling new holes, re-string and play!
Super cool. Thanks.
Thank you
What I want to see is a Les Paul with a fender, hard, tail bridge. I think it would stay tuned better because you can adjust each one of the saddles which is a pain in the ass on the Gibson bridge.
You can get better raised bridges, like the Babicz system, which have individual adjustability.
Take a look at Steve Morse's Tele from his days with the Dixie Dregs. He installed a Tune-o-Matic on it in order to have room for all those pickups.
The answer is usually yes if you have enough budget.
Yeah pretty much
Thanks mate.
Cheers
Take a look at The late Rick Parfitt’s Tele. No bridge at all just a stop tail. Francis Rossi’s Tele was later converted into a Strat formation with that bridge and stop tail (Status Quo)
Yeah Rick’s had a very interesting setup.
On a flat top guitar u need a 2 degree neck angle. Either on the neck heel or in the neck pocket...
Great video ,I'm glad I asked you about it.
Thanks Brad.
Take a look a Rick parfitt's telecaster or Francis Rossi' guitar's .I think there's some videos on RUclips of there ones.
Thanks Mark
I was thinking about this the other day but didn't know how.
Hopefully this was helpful.
Build it and we will come 🙂 Be a cool project
It would be a fun one. I’m not a huge fan of those bridges, but it would look neat.
Remember that Tele's and Strat's are flat top guitars where as LPs are carved and does make a difference in how a Tune-O-Matic would fit.
True, but tunomatics are also used on flat top guitars like the sg.
Fender has made those in the past. They call them Troublemakers(Tele). Squier also had a P90 Strat with a wraparound bridge they came out with last year I think. I think they even used literal Epiphone parts on it.
That’s cool. I know Kiesel made a bunch like that as well at one point. Not sure if they still do.
They make the Jim Adkins signature
I got a Guitar Fetish Earl Slick tele with full brass wrap around, with saddles, bridge on / posts in a rout. Sounds great but the saddles are a little awkward to intonate.
I’ll have to check that option out
Great video, thank you!
I have a Telecaster Body, a Gibson SG style neck/headatock, and a tuneomatic bridge. After watching this, I’m now wondering what kind of challenges I may face mixing a fender body with a Gibson neck.
And I’m totally open to using a different style bridge if anyone has an idea that will better suit what I’m trying to accomplish.
BTW this Tele body I have is routed out for P90s. Thanks
If you switch to a flat bridge type you will just need to sand the heel of the neck to remove the angle and it should work fine. Otherwise you keep the angle and the raised bridge, but the pickup heights will be quite high haha.
👍
A similar, but different question...
I have a Bicentennial Firebird that I attempted to put on an earlier Vibrola complete with lyre plate. The strings were way off the fingerboard and the bridge decked...was this due to the neck angle being too straight?
Could be. Was the action on really high at the bottom of the board? Some combination of shimming in a bit of neck angle and tightening the truss rod a bit are likely what you need.
Interesting topic. Now I have the urge to build one myself. I think I will try to add the angle to the neck pocket. What would be the best method of doing that to a Tele body that already has the traditional pocket routed?
You could build a hinged router box, and mount a handheld router on a couple of rails that ride on the box. Set the box to the desired angle and go. Or if you have a pin router, or drill press that will run at a high enough RPM for a router bit, make a hinged sled and mount the body on that and cut in the angle that way. I've used both methods many times, they will both work well and are both pretty straight forward and easy enough.
That is a good question. I would like to know that one myself.
This is a great woodworking question. A lot of people prefer using an angled jig to route the pocket at an angle. I personally thing it would be easier to add a small extension to the heal of your neck and put the angle on that. If the pocket isn’t deep enough it’s easy to route it down a touch. It’s really all a matter of preference.