overall, your video was great, except there is a plastic latch on both sides of filter that needs to be released with a long flat screw driver. Otherwise, you will break off the plastic latch. I don't think you need the latch.
Thank you @maximilian for this video. My deebot pump manifold cracked due to clogging :( Do you happen to have the link for the replacement water pump set?
Everything good until 2:27... I removed all the screws that could hold the upper part but somehow I feel a resistance near the captor like if there was something else screwed. Any clue ?
@@johnagius1026 did you give up then? I was hoping receiving an answer from the creator of this video 😥. My robot is completely opened up for 5 months now waiting to be fixed. 😅
@@johannes-maximilianbrede9135 ich konnte es reparieren. Die Pumpe lief über eine separate Batterie. Das kleine Ventil zum Auslass klemmte anscheinend. Da ist wohl eine Kugel mit einer kleinen Feder drinnen. Konnte das mit einer Nadel wieder gängig machen und er wischt wieder. Aber vielen Dank für die schnelle Antwort.
It was very helpful. Thank you!
Yay...I was looking for this film for a while :) finally I am able to repair my Deebot 🤟
A little big quick but helped me very much. In the most cases not the pump is damaged . On my robot only the filter was stucked
Thank you so much!
great info, thanks for posting this!
You’re welcome! I didn’t find anything like this, so I made a video on my own :) hope it helps!
@@johannes-maximilianbrede9135 helps a lot, was struggling getting the thing open. you did the right thing :)
overall, your video was great, except there is a plastic latch on both sides of filter that needs to be released with a long flat screw driver. Otherwise, you will break off the plastic latch. I don't think you need the latch.
Is it possible to disable carpet sensors without removing the entire main case?
Thank you @maximilian for this video. My deebot pump manifold cracked due to clogging :(
Do you happen to have the link for the replacement water pump set?
Nice teardown video. Is it possible to replace the rubber "throat" my one has a tear in it, not even sure if I can buy another.
Can some one please guide me i got the blue belt broken on my ecovacs deebot 930.. where can i find the replacement for the same?
For what microsd slot?
Everything good until 2:27...
I removed all the screws that could hold the upper part but somehow I feel a resistance near the captor like if there was something else screwed.
Any clue ?
Anaïs. I got the same problem. Ifelt a resistance near the captor, so I could not lift the top open.
@@johnagius1026 did you give up then? I was hoping receiving an answer from the creator of this video 😥.
My robot is completely opened up for 5 months now waiting to be fixed. 😅
There's smaller clips alone the front you have to slowly release using a flat head screw driver.
Dónde has encontrado el despiece, por favor puedes poner enlace gracias.
Wo kann ich die Wasserpumpe für den ozmo 930 kaufen in Deutschland ?
Ich habe sie von prosimaplus.de - schreib ihm einfach eine Mail
@@johannes-maximilianbrede9135 ich konnte es reparieren. Die Pumpe lief über eine separate Batterie. Das kleine Ventil zum Auslass klemmte anscheinend. Da ist wohl eine Kugel mit einer kleinen Feder drinnen. Konnte das mit einer Nadel wieder gängig machen und er wischt wieder. Aber vielen Dank für die schnelle Antwort.