You are very welcome , i AM glad it helps, just one more tip i totally forgot to mention on the video, make sure to take out the key from the car , dont leave it in the ignition, othewise it may cause airbag fault on the dash, that will need to be cleared with diagnostic tool.
Thank you so much for this video, my power seat is broken and is stuck forward so i have to remove the seat and manually move the tracks back. very helpful!
came here to ask the same. i’m thinking it might be something you could find at an auto shop or home improvement store. i’m going there later today and if i find ill comment back
In the case of american car, you need to check whether the bolts can be reused, as i'm some od the american cars once the bolts are removed, they will not do the purpose when reused, do they need to be replaced with new once and screwed back in with the torque recommend by producer. Just check that before you do it to dont compromise the safty.
Nice video, but I have one question. Is it fine to disconnect the battery 100 percent of the time? I don’t have a diagnostic tool. Thanks for the video.
Thanks for watching, when you disconnect batery in older cars it will reset radio, so you need the code for radio if it has the code. If there are electric seats it may reset the setting etc. Other than that it will be fine, after dicounecting the battery , turn on lights or something to drain the system fully and wait couple minutes before disconecting the seats. Normally i don't disconnect the battery, and 99 % times is fine, fault comes on the dash if the car is button stop / start, so for these you are definitely better of to disconnect the battery if you don't have diagnostic tool.
I should mention that, don't put the key into ignition while the seats are out, when it comes to cars without key ignition keep the key at least 5 meters away while the seats are out, works in 99,9 % if you want to be sure , you can also disconnect the battery.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Thanks for the video Peter I'm just starting out working properly valeting cars
Great video, you make it look straight forward thanks
Thanks watching, I am glad it was helpful.
Good video. Straight to business while being informative and sounding educated. Appreciate you
Thanks for watching I am glad you like it. Best Regards. Peter
Very nice tip on how to swivel out the seat 👍
@@hemtet5500 👍
my second detail tomorrow and this time I think I will remove the seats. this was a major help, thanks☺
You are very welcome , i AM glad it helps, just one more tip i totally forgot to mention on the video, make sure to take out the key from the car , dont leave it in the ignition, othewise it may cause airbag fault on the dash, that will need to be cleared with diagnostic tool.
Thanks for the video. Very helpful. Would like to see a few more for detailing.
Thanks Cormac
Thank you so much for this video, my power seat is broken and is stuck forward so i have to remove the seat and manually move the tracks back. very helpful!
You're welcome!
Thanks, taking out a seat to replace the pressure sensor.
Great that video was helpful.
What is that tool called that was used to unscrew the bolts?
Were u able to find it, i also need
came here to ask the same. i’m thinking it might be something you could find at an auto shop or home improvement store. i’m going there later today and if i find ill comment back
i believe it’s an allen wrench
I used ratchet with torque size 10
I used ratchet with torque size 10
Thanks for the video, would you know if there are special precautions in removing seats from Mazda2 hatchback?
In most cases it's pretty much the same
Good tutorial. Thanks for the video.
Thank you
Can I do it for a GMC sierra 2013 ?
In the case of american car, you need to check whether the bolts can be reused, as i'm some od the american cars once the bolts are removed, they will not do the purpose when reused, do they need to be replaced with new once and screwed back in with the torque recommend by producer. Just check that before you do it to dont compromise the safty.
Nice video, but I have one question. Is it fine to disconnect the battery 100 percent of the time? I don’t have a diagnostic tool. Thanks for the video.
Thanks for watching, when you disconnect batery in older cars it will reset radio, so you need the code for radio if it has the code. If there are electric seats it may reset the setting etc. Other than that it will be fine, after dicounecting the battery , turn on lights or something to drain the system fully and wait couple minutes before disconecting the seats. Normally i don't disconnect the battery, and 99 % times is fine, fault comes on the dash if the car is button stop / start, so for these you are definitely better of to disconnect the battery if you don't have diagnostic tool.
What tools where used in the video specifically?
I used ratchet with torque size 10
How to avoid SRS light?
I should mention that, don't put the key into ignition while the seats are out, when it comes to cars without key ignition keep the key at least 5 meters away while the seats are out, works in 99,9 % if you want to be sure , you can also disconnect the battery.
My toxic trait is thinking I can do this😭
Its not difficult
Can do anything you put your mind to!
Lmao!😂😂 same
Stop all the talking and just remove the seats
Yes sir 😂
So much talking no showing the actual shit I need to know
Thanks for watchine anyways
Just talking with zero instruction
;)
Great video Peter
Thanks Vad