Making NEW Pins for Earthmoving Machinery | Machining & Welding
HTML-код
- Опубликовано: 6 сен 2024
- These pins are worn out so we are making new replacement pins! We’ve got 2 big bucket pins from a Hitachi ZX670 Excavator and 2 pins from the ripper bed frame off a D9T Bulldozer. We show the step by step process of making the new pins. We start with machining the plates off the old pins before machining up the new pins using induction hardened chrome rod. The D9 dozer pins also need deep hold drilling and tapping for the grease holes before using the milling machine to drill a through hole for the grease channel. We finish up the job by welding the plates onto the new pins.
In this video we are using:
- Hafco TM-26120G Centre Lathe
- Hafco BM-63VE Milling machine
- WIA 500i Weldmatic welder
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: bit.ly/ceesubs...
Join our Patreon Community: / cuttingedgeengineering
Official CEE Merch shop: www.ceeshop.co...
Check out our AMAZON store and explore our favourite finds that we use in the workshop:
www.amazon.com...
To see more follow us on online here:
TikTok: vt.tiktok.com/...
Instagram / cutting_edge_engineering
Facebook / cuttingedgeengineering...
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: www.epidemicso...
#australianmachinist #machineshop #machinist
Another day, another job done! Making pins for earthmoving machinery is pretty simple but did you have a favourite part of the process? Let us know in the comments 😎👍
WATCH NEXT: Shop Made Heavy Duty V-Blocks ruclips.net/video/6jBa5nJ8NdA/видео.html
🛍Official CEE Merch shop: www.ceeshop.com.au
📲Follow us online here: linktr.ee/CEEAUS
🎉Bonus content in our Patreon community: www.patreon.com/cuttingedgeengineering
G'day I love the patreon page
@@Murphyslawfarm thanks for joining us in there & that support we really appreciate it mate
@@CuttingEdgeEngineering No worries mate. Glad I can support a great Aussie channel and business 👍
It's always cool to see just how much difference there is between hardened chrome and the base metal. Even the ceramic inserts, as much as you baby them, have a difficult time cutting through that induction layer. That's probably my favorite part, but watching you cut through the old welds and recognizing when to stop is pretty satisfying , too.
I like you always use the crane instead of doing "burradas" (big efforts) your body will thank that in the long run. And that is "educational" for wievers!.Cheers fron Spain.
Best part of the editing is she knows when to speed up certain parts that are highly repetitious and we've already seen. When a new process comes up we haven't seen she slows it back to real time. That really helps it from becoming a 2 hour video without missing anything. That only comes from experience. And Curtis is his normal awesome self.
Yes, that is improving for every week. I have seen all the videos so I use the 15sec--jump-button quite a lot. I probably see 50%..? I skip most of the outtakes now. In addition to the HBO-show "The last Of Us", this is one of two entertainment-highlights in my week (I'm a retired structural engineer/architect, Norway). CEE; Did you see my email-suggestion for "Swarf-sculptures"..? (sent Dec. 15th).
Why retire
Thank you for showing us where these parts go and work on the machines. Elevates the context to the next level !!
Yes, I agree, it absolutely makes it easier to understand & appreciate
Yes, sometimes I wonder where these parts actually fit.
It's really useful, especially for those, like me, that are not familiar with machinery 👏👏👏
Was gonna comment just this. They usually show video of the equipment but don't point to the location of the part A simple freeze frame and a well place arrow are a Godsend.
@@dirtfarmer7472 asdasdas
Got to say. Never miss CEE drops. After watching all the outtakes….Kurtis is a true master of his trade/craft. Karen via her filming and editing makes Makes Kurtis appear that all his words flow and make perfect sense. …..
The outtakes say otherwise 🤣🤣🤣
Homey seals the deal…you guys deserve every success 👏🏻👏🏻💪🏻💪🏻🙏🏻🙏🏻🇦🇺🇦🇺
Have an awesome weekend 🍻🍻🍻
I thought my talking had gotten better after 2 years, but it's actually Karen's editing that's gotten better LOL
@@CuttingEdgeEngineering I think your talking is getting better I can understand when you say fu*k off train much better now than I did a year ago.
@@CuttingEdgeEngineering Karen in the words of The Castle……”Slap him he’s dreaming”🤣🤣🤣🤣
You guys rock and never get boring…,
PS love “Homey Cam”👏🏻👏🏻🙏🏻
Karen's camera work and editing are so smooth and show the job in the most interesting and entertaining ways. Professional, accurate and fun to watch with always little artistic nuances that add a lot to how the job is presented to us. Shows the job as its done in its best light.
Yes I agree with you, of course I’d say it a little different, but you expressed the idea more goodly. Thank you Sir
I've heard that Hollywood is after her skills,if she goes, Homeless will have to do the editing.
sadsads
Yea we would love to see Karen’s face hi Karen
Another thing you never show all the setting up
What I appreciate about the bloopers at the end is how often you smile/laugh. Being able to do that throughout your day is key to long-life and happiness. Keep it up you two!
In many cases, it's either laugh or suck-start a 12-Guage...
I don't know about you, but I much prefer Laughing...
Especially if there's a Psychotic Edge to the Laugh making everyone around you a little nervous...
😄😁😆😅😂🤣
I’m not an engineer but I just love watching what you do, I do feel that your skills are greatly under appreciated outside of your industry. I just hope younger people see and get interested in this profession.
That's what I love about youtube / internet : you get to learn about stuff you would never have been exposed to. Makes you appreciate how humans as a civilization have such a wide variety of skills and abilities. And that whatever the field there are people who are highly knowledgeable / skilled.
We take a lot of things for granted, but they are only possible because all those people work in their specific fields to make this happen. Construction, IT, healthcare, farming... so many things to learn !!
Here’s to everyone enjoying the master craftsman Karl and his intrepid producer/director Karen tonight {in the USA}. We’re living our best life and that’s for sure. Thank you guys for another incredible video and give my love to homie ❤😊😍
Cheers mate thanks for the great support each week!
Who's Karl ?! 😆
Yeah nice one Carl.
... fairly sure it's Kevin. I don't think he ever actually says his name 🤣🤣🤣🤣
It's KURTIS !!!!!!
I've never touched a lathe in my life. No idea how to weld. Everything about this channel is outside my knowledge set. But every single video is a must watch for me. It's great to watch a master of a craft at work. I truly appreciate the tone of the channel, and the wholesome honesty they work together to produce in every episode. My sincere thanks for the great entertainment
Video editing is improving in leaps and bounds. After 15 minutes of a 37 minute video already 2000 likes 👍
Thank you so much 😀
Karen really pays a lot of attention to the audio while editing, and it shows.
Not having mouse squeaks during timelapses is something I don't see anywhere else, this is just on another level!
10k likes an hour at 4 hours currently
I really enjoy the fact that she uses unsped up sound clips for the ffw parts
@@michaelmain1990 Yeah, but she cuts them to fit too! That attention to detail really makes her edits next level!
As another viewer said its good to know where these parts fit. Fridays essential viewing done. Great job. Cheers.
I never miss a video. I love seeing the steel shine and hear your explanation
thanks for supporting the videos mate glad you enjoy them
Hard same
What I find fascinating about the work you do is the crazy mix of "I'll do it by eyecrometer" and "Better measure with our most precise measurement instrument"-type work you do, and how your approaches differ there.
It takes a skilled craftsman to do a job only as precise as necessary, and still within spec.
And your wife is doing just as great of a job with the editing, she makes time just fly by! And I'll never get tired of saying it, not having mouse squeaks during timelapses is highly appreciated, and something that just elevates this to another level!
This morning I feel even slower than Captain Slow. I just realized that there is more than one interpretation of "Let's face it" because of the lathe turning meaning as well as the more general one. Oh well. Never too late to learn, I guess. Excellent work on the video and the metal work, as usual. Have a very good weekend, everyone.
Kurtis, I’ve watched other machinist on different video channels mostly doing smaller jobs on smaller machines but I gotta say you’re by far the most professional and most thorough operator I’ve seen. 👍👍 Like I’ve said before, if I was in Australia and had industrial sized equipment you’d be my go-to guy for sure. I just wish you’d bring in a young, enthusiastic,knowledgeable, serious protege to be your understudy. Your skills, work ethic and knowledge need to be preserved. You’re not old. But you never know…….A youngster could never learn what knowledge you’ve accumulated from a book. Pass it on.
Oh man, you engineers are a breed apart. There are times you appear to work 30 times faster than us mere mortals could ever manage. Regards from Scotland.
Im Filipino and Everytime I see any of my mechanics/machinist friends I recommend your channel
That's bloody awesome thanks for supporting the channel mate
I really appreciate the patience and care in the way you work.
Watching these videos is almost like a mediation for me.
You are so delicate and mindfull with your equipment, I've seen other "fabricators" throw their tools and being the "rough" guy.
There is something so satisfying about knocking out jobs like this… not building an entire village, not worrying about saving the whole world, but just fixing things… something with a start, middle, and finish that’s all within reach within a day or two. I’m so jealous.
I don't know what it is about your videos but I always look forward to Friday when the new one drops. Top work keeping me distracted for 40 mins !
Glad you like them!
Hi Kurtis and Karen,
Was all set to hit the sack and was notified your video was uploaded. Well worth the lost sleep. You both stay safe.
Hey Don thanks for staying up to watch the new vid we always appreciate your support mate
thx a lot, family..... finally some strong and satisfying work.... thanks for letting me see this, blessed week, good caresses to each other
Another great video to start my Friday right, also I know you’ve seen a comment like this before I really do love that you show where the parts go
I am from Moldova,I like your video's,you are very good in metal processing-one day I will be as good in my field as you are in yours.
Wow such wear, and of course Kurtis will replace & repair & Karen will film & homey will check saftey,
Lovely work as always
Hey Andrew! Thanks for taking the time to watch this one
I will probably never step foot in a machine shop or ever find myself in need of a skilled machine operator such as Kurtis, but it is still so satisfying to watch a job start to finish.
Every time you talk about nitriding, I want to see red LEDs scanning back and forth 😂
Andrew, such a handsome devil…
Dude i thought I was the only one!
K.A.R.R. is watching 👀
Hahahaha, awesome!!
Best reply award goes to.....
The minute I saw this was video about pins I instantly knew the newly shop made riser blocks would be used. They look awesome after nitriding. Excellent job and video as always.
Very grateful for what you provide. Thank you Karen, Kurtis, and Homie
you're welcome! Thanks for the support 😁
I get better and better at predicting all the steps in these repairs. I didn't miss one today. You are a great teacher, Kurtis.
The time lapse footage is like Homie-vision for Kurtis
Karen's reaction to the smoking bullnose bit is priceless. 10 out of 10 for another video with great content and great editing as both the slow motion and fast motion lathe work is always fantastic. 👍👍👍👍👍
What a perfect morning, fresh coffee and a cutting edge video, thank you!
Good morning! Have a good Friday over there
@@CuttingEdgeEngineering Thank you! A good weekend to you (if i got my time zones right)
This channel in my opinion goes against logic. It is a very successful channel based around a very specialised subject. How many people know much about this field of work. Yet week in week out thousands tune in to watch. And now know 100% more about the subject than they did before. Which is still not a lot. For me it has four components that keep me watching. Interesting work. Combined with the description of what it is for, and how it is used. Fascinating. The execution of the fabrication. General quality of the work. The camera work and editing. Has to be among the best of the RUclips channels. And last but not least. Homeless the dog. Security and chief mail opener. It would seem to be a winning formula. I enjoy and appreciate all the effort put into these videos. And glad that so many others do too.
Even if this a common job.
You give top quality with perfect welds.
You don't kid when you say harden face.
Karen is working hard to get the angle to video and sharp editing.
Now tools down, cold beer in hand.
The lack of preheat on stuff that big, on a material that's easily induction hardened is a bit concerning to me, but they may have edited the preheat step out. Typically you'd want to preheat to 270-300°C. This is because the heating and cooling cycle in welding is pretty similar to the induction hardening process. So you have a risk that the heat-affected zone next to the weld becomes extremely hard and brittle causing subsequent cracking . Preheating the material slows down the cooling rate making the HAZ softer and more ductile.
@@TSorovanMHael ...I'M PRETTY SURE THAT HE KNOWS WHAT HE'S DOING-(!)
I'm always impressed with when people machine metals, especially on a lathe. You take a material designed to withstand hours of grueling heavy loads and you shave it and shape it like it's a block of butter!
I know it's hard on tools and such like, but you make it look so easy!
Good evening from Lake Stevens WA USA
Kurtis - you are an artist and a fine machinist. Keep up the great work. Look forward to your videos find them peaceful and entertaining!
thanks very much mate!
Good evening from Vancouver WA!
Kenmore WA
I'll jump in, Ferndale WA.
Kennewick, WA
This is why I so enjoy your programs. You not only provide a show about engineering; you explain why you change tools and provide us novices with reasons for making those changes. Thank you so much. I'm 74 years old and retired from education. And I'll tell you now, I have learned more, and understood the 'why' more, from your posts, than I have learned over the last fifty years from classroom instruction by people who claimed to be professional educators. Again thank you for sharing your knowledge.
Pins pins and more pins, they always are the first thing to wear out particularly on the H.
That button insert is no joke. I have to applaud you from the other side of the world sir. The work you do, the knowledge you have and the fact that you are a 1 man show is absolutely outstanding. All the best and here's to years and years of continuing success.
G'day Kurtis, Karen and Homey great video as always and I learnt more about drilling and drill bits 😀 👍
awesome mate it's always good to know if we can give a bit of education and entertainment on each video 😎👊
Karen, Story telling is the best.
You keep finding ways to improve shots and show what is happening. Always interesting.
Kurtis, what is happening with the equipment is nothing to what is going on in your head at the same time. You are very talented...
thank you for the great comment we both appreciate that!
Once again, another great video. You guys are doing a great job. Keep it up!! 🎉🎉
thanks very much mate we appreciate it as alway!
There’s your “cutting edge engineering” right there in those shop-made “V” blocks. Excellent example where a little thinking shortens the time for a job and saves the customer $$. 👍
Best part of my Friday morning! Gotta love seeing chips fly
TGIF!
You don’t know how true that is this week
@@eliskelton hope you have a better week next week
I just have to wait till next Fridays video then it will be better😂
Coming from somebody that grew up welding and lineboring equipment for decades, Curtis is a wildly intelligent guy. Everything he's doing would take your average welder/ machinist 3x longer to do any of this.
Genius edit Karen 👌 3:37 “Cutting Edge Editing”!
thank you! I like to challenge myself with getting clean transitions
Holy crap those pins were munted! That said folks, nice video to come home to on a Friday after a rough week or work here in Vancouver BC Canada. Seeing the work of two people who love what they do...so nice to see.
was literally looking at mini lathes online and this video popped up. once again with the perfect timing! 🔥
do it! 😂👊
@@CuttingEdgeEngineering closest thing i get to a lathe is at work when im turning brake rotors or drums. id like something at home when im working on other hobbies that might be needing threaded or turned!
@@michaellindsey13 The only time you'll regret having a lathe at home is if you tell people you have one 😉.
Saving my customer a bit of money, that is a good way of keeping your old and getting new customers. Well that is what you do isn't it.
Jabeezus dude! Can't a old man get rest over here in the western hemi? I got this notification like 20 minutes ago that CCE had posted and I have to check it out. Thanks man for all your efforts and great video!
the right choice was made here 😎👊😂
@@CuttingEdgeEngineering Right or wrong, much love and respect brother!
Once again absolutely outstsandin kurtis .
You and Karen the best.
Спасибо. Как всегда все на высшем уровне.
This was AWSOME!
I used to sew but always wondered how the stitches held.
I sewed on my merit badges (badly) ,then got better when my mom said " you need to learn lots of different things in life. ( I'm 59 now )
My kids and grand kids can't believe a MAN knows how to sew.
The main comment I want to make is, the model you made was what got me.
After all these years! Lol
Thank you!!
Still Thursday 11 30 pm here I'm lucky to get to see ur videos early lol thanks guys.awesome work you both rock.
wow watching it a day early over there lol
Thank you my beautiful upside-down aussie peoples for continuously making *LONG* videos.. The 35-50 minute range is absolutely perfect- I like to binge your videos while eating and it's about the perfect runtime for dinner
Don't fall off down there folks, much love to Carl and Karen
Gday Kurtis and Karen, these are the nice quick easy jobs that are enjoyable, you said if the parabolic drill breaks off the pin is rooted, I’d be pissed off with having to buy a new drill, there not cheap, great video as alway, have a great weekend mate, cheers
Good project, I haven't been watching or commenting for awhile, I've had medical issues going on but I've been binge watching. I love the new angle blocks and I knew you weren't going to leave them with rough surfaces, you have too much pride in your work to have anything looking crude.
I enjoy watching you use the button insert, I have a small lathe in my home shop and I'll be getting one to use. It does a great job cutting out welds
At 9:39 the reason you explained previously why you don't take 3mm cuts with that insert.
lol yup that's it 👍
Karen you're doing a wonderful job with the video and editing.
Kurtis you're work is always fun to watch. I wish you could upload more than 1 time a week.
Keep em coming.
Un régal de voir le chef travailler, un régal de voir la vidéo, bravo à vous deux 🥰🥰🥰🥰🥰🥰
merci mon pote j'apprécie !
Прекрасная работа! И какой правильный технический английский! Восхищён!
More great editing. Of course Kurtis helps with his great acting. It's cold and flu season here at our house so we have coughs instead of trains going on. See you next week!
jack
hope you're all feeling better soon!
That lathe has so much power, 1,200 RPM effortlessly while still being quiet. That’s an amazing machine.
You guys are the best.
That's a 3-Phase motor for you...
In most cases, the loudest part of the motor is the cooling fan mounted on the rear end of the rotor shaft...
I'm always amazed at how shiny the metal is under the outer skin....lol
Late today, but here's South Eastern Germany reporting in. Thank you for the entertainment and as always: Have a 'effing great weekend, everybody!
Love watching a true artisan at work!! Of course, it wouldn't happen unless Karen and Homey were applying their unique help!! Hahaha. You guys are wonderful - Keep 'em coming!!! Always look forward to the next one!!
I know hardness makes a huge difference but the cut depth per pass between the two layers was a perfect visual example. Great video as always.
I’ve seen a lot of different welds, both robotic and human. Your welds are exceptional in both quality and aesthetics. I can weld and have for years, and only wish I had your talent. You make it look so easy. I really enjoy your videos and look forward to seeing new videos every Friday.
Having a parts rotator definitely helps a lot. Also helps a lot when you use 10-15% CO2 instead of the generic 75Ar/25CO2. Welds tebd to be cleaner and less oxidized. He's running it in pretty solid "spray transfer" settings which explains the smooth finish and low spatter. The majority of welders out there don't know how to setup spray transfer.
Craftsman work on an industrial scale. Our way of life depends upon people who have your skill and share your commitment to quality work. Nicely done!
If anyone is wondering about the cost of genuine pins from the dealer against these locally made items - if you are not in the industry you might be horrified at the cost and lead times from the dealers for what you think would be a common item. Great job as always guys.
It’s just like buying OEM parts for your car except at least the car stealerships will most likely have your overpriced parts in stock
@@Woodie-xq1ew
Real estate and administration / paperwork are not cheap.
Auto parts are expensive for a reason.
@@benjurqunov does admin/paperwork and real estate account for Ford trying to charge me £900 more for a part than euro car parts or over £1000 more than an ebay seller. because IMO it definitely fucking doesn't
@@Woodie-xq1ew Considering Ford has to keep parts on hand for nearly everything they made in the past 20 or so years...
Ford has hundreds of thousand of all different parts what ties up hundreds of millions in cash to sit in a very expensive distribution warehouse.
Just keeping track of each of those thousands of parts and what shelf they put it on costs a fortune too.
Do the independent parts seller or Ebay guy have to carry that kind of overhead expense ?
You said yourself, "car stealership will most likely have your overpriced parts in stock".
As Kurtis has mentioned in several other videos, he can usually make 2 parts for what the Customer would pay for one OEM part and the customer waits 2-3 days for Kurtis instead of 4-6 Months for the OEM...
Considering how much it costs the Customer in Down Time, even if Kurtis charged more that the OEM cost per part, it would still be more cost effective to buy from Kurtis than the Manufacturer...
Hey man I spent my 18th birthday drilling 7/16" (bananas) holes/water cooling passages in plastic injection molds with standard twist drills anywhere from a few inches or up to 24" deep (short of drilling into the cavity in the mold). It was CSM2 steel and would work harden in a heartbeat. Then it was hell to drill the hole further. With a little innovation the shop engineer converted a Lucas horizontal boring mill to a gun drill with a high speed spindle. With the twist drill it was a thousand trips into the hole and then drag it out to clear the chips. On really deep holes I silver-soldered standard 7/16" drill to drill rod and that was even more trips in and out of the hole. I had to learn the trade the hard way and that was the rude awakening in how to actually work for a living. You remind me of the old time machinist that taught me the trade and me as a 50 year younger man. I enjoy watching your videos and hope you will continued doing them for a long time to come. Thanks my Australian friend!
Another great video. Thanks for getting my Friday off to a good start.
If I had worked in a shop doing what you do in my early years I'd would probably still be doing machining as a job vs a hobby. There is something about the scale of the large parts you work with over the small stuff I did back then.
Hey there.
I've had the best luck with those ceramic inserts by never dragging them backwards out of the cut.
Back the cross out a few thousandths of bananas before reversing the carriage.
And again greetings from Kazakhstan ! THANK you so much for your professionalism , as well as for your high- level content ! I 'm afraid to imagine what all these customers would do without you ... Thanks to specialists like you, Curtis! Many of us can no longer imagine Friday without your content. I have nothing to do with turning, I am an electronics engineer, but I understand perfectly well what difficult work you sometimes do. I have a lot of respect for people like you Curtis. Be healthy !!!
Thank you for adding the stock footage of the various excavators to explain the location of the parts. I know that isn't easy to do, but it's a detail that is super appreciated by this viewer.
V-blocks looking good!
everything is better with nitriding 😂
We've seen it a fair share of times, but I never get tired of seeing tools cut through the induction hardened layer of the chrome bar you use for jobs like this. The way the ceramic cuts through it, it almost doesn't even look like metal being shaved away. RIP to that ceramic insert though.
You do make things look easy, but you spend a lot of time learning each part of your job .
Great work each time too.
God bless old man cliff
Seeing that parabiotic drill and then seeing it in action was really interesting. Knew that other drill systems existed, but never seen them, and never given them any thought given my general 1-10mm kit does a great job.
Wow! Surprisingly easy to see when you're through the induction hardened layer! And interesting to see how even it is and how thin the border is! Like one pass is fully hardened and the next is not!
Nice job guys, those parabolic drills are great for deep holes, I've used a gundrill before but they're expensive and without the high pressure coolant it's no quicker than a Parabolic one
I’m 75 years old and was a welder for a few years as a teenager. Welded pipe most of the time. Everything was stick E6011 or E7080 some TIG for stainless. Never used wire feed the shop didn’t even own one. I only recall that we rented a few machines one time for a rush job replacing the deck in a big tank that had a ship waiting off shore waiting to unload. 6 or more guys welding around the clock in the tank. I got a bad flash burn from the reflection off the tank wall coming in my hood into my eyes off my own lens with so many guys welding. I didn’t even know how to set it up but it was fast and easy all flat welds. You are a remarkable welder I like to see you weld and would like to know how you decide heat and feed rate etc.
That hard turning is crazy. You can see that it isn't so much cutting the metal as pushing on it so hard that it melts, and then scraping it off! It was also interesting how 'squeaky' the stainless was when being cut in one of the recent videos compared to these pins.
It doesn't get hot enough to melt. It merely gets up to about dull red heat. Sometimes if the chip is thin it's enough to cause it to catch fire like steel wool, and it starts glowing bright yellow as it burns. Heating at just below red heat causes a phase transformation in the material converting some of it into a different crystal structure which is much softer. In other words, it reverts or erases the induction hardening process. Typically after heat treating a high carbon steel, there's a "tempering" step at about 300-400°C for and hour. This softens the material a bit to avoid excessive brittleness, making it tougher. But if you go above 400 the tempering process starts progressing much more quickly and becomes more dramatic. Near red heat the tempering is almost instant, resulting in material with the same hardness as the relatively soft interior of the bar. Same thing happens with drill bits if you spin them too fast or don't use oil, they overheat then the tip rapidly softens. Then they stop cutting and resharpening is futile. You have to use a cutoff wheel and chop a chunk off the end, then totally regrind.
Excellent, job..! Here in the UK, when Friday comes around, I'm up, washed, fed, a few jobs done (I'm a retired old geezer) I switch my phone on, and look for Kurtis, Karen and Homie's latest video... Aaah..! All is right, in my world, for a while, anyway..! 👍🏻
MUAHAHAHAHAHA RUclips didn't get me this time. I saw it on my own. No need for a reminder.
Also legitimately have you in my calendar every week now so I don't have to worry about missing an upload. :D
next level supporter right here! Thanks mate we seriously appreciate it
@@CuttingEdgeEngineering Since your videos drop @ 11 pm PST, I watch the weekly CEE video then walk my dog @ midnight. (Old habit formed from working graveyard shift.)
I plan to open a small machine shop in a few years when I retire. I will be 45 and it’s been a long time coming. Really glad I found your channel and enjoy the content. Thanks
awesome mate all the best with it! 😎👊
Once again brilliant display of knowledge and skills.
Ceramic insert (cutting tools) sound interesting some details on these would be interesting.
Forgive me K and K for just watching your video today. Away for work and this was the first chance to watch it. Simple yet still professional... Cheers from Cape Canaveral Florida
Hey mate no need for apologies thanks for taking time to watch when you can!
I'm so,happy you named a magpie after me, hahahaha.
Good to see HOMIE enjoying life .
As always a great video, Curtis and Karen video videographer extraordinare
Hi Karl and Karen, I don’t know why but I’m addicted to your videos. I guess it’s the opportunity to watch two master craft persons. A man and a woman that have mastered their respective crafts and obviously enjoy their work. It comes across. Thank you.
*Kurtis
Knocking off at full dark this time of the year, that's some hard yards. 🤘
I love your videos. Sometimes you fix it by welding the damage and then cut it back to size. Why not this time?
Woohoo. Beer o'clock and Friday video time. Most excellent. Greetings to Kurtis, Karen and Homeless from across the ditch =)
Hey mate take care with the weather heading your way over there
It's funny that all this stuff are for these huge industrial machines, yet I often find the materials shockingly beautiful. They're truly modern wonders.
Great job! Love your shop. 💪💪
I miss my days at my dads factory. Used a Colchester triumph 2000 lathe and a Bridgeport mil machine. Don’t forget the Giana lathe with the 3M bed. Man I miss those days.
Karen, that last welding cut from the first to the last pass was seamless. You really have upped the editing and filming. Kurtis may have to watch out for who takes the quality title.
haha thanks Neil I do like a good transition edit 😁👍
My favorite part was the final dump of scrap into the bin, from well on high, for as much noise as possible. Style points. 😁