I've had one of these machines for almost 10 years, and absolutely love it! I clean the main mechanism on the right side on a regular basis, along with periodic descaling. I've made countless espressos with this little machine and it's worked flawlessly since I bought it. I have noticed recently, however, that one of the two holes in the dispensing nozzle wasn't pouring at the same rate as the other one. It still poured the same amount of great tasting espresso, but I figured it was time to clean the dispenser. Your video has provided me with information on how to do that. Thanks for putting this video together and sharing the knowledge! Cheers
Good directions. Main challenge was cutting through the glue building down the top of the dispenser. Ended up cracking the plastic for the top but re-sealed with food safe silicon. Lots of coffee gunk cleaned out after 8 yrs of use. Thanks
Thank you very much... my xsmall is working perfectly now. Thank you very much. But I cleaned with water without removing the glue and just put the plastic in the holes to clean the internal coffee dispenser.
Do you possibly know, why the pump works slow when frothing? (xsmall). Before it worked in two phases - slow initially and faster after 5 or 10 sec. Now my pump does not speed up to the "second phase". It stays pumping slow and frothing is not very efficient???
Hi there I have seaco xsmall that often wasting fresh brew coffee powder without brewing coffee. I noticed pressing the beans down while grinding might works little better but not always. not sure what is the prob. Disassemble the grinder and cleaning would help you think?
Hello. After turning the machine on, on the right side the green temperature light lights up and the right red exclamation side is flashing rapidly. Do you have any idea what could it be? It still makes coffee...
I have a question regarding a Saeco Aulika. I had a small piece of metal in the coffee beans. The grinder was blocked. I checked, the of the small metal bolts where displace. Put everything back.... And the grinder does not work. It shoes “heating” or add coffee, but it does not move. Is there maybe a fuse somewhere that burned..??? Can you or anybody help me. Ths
Hi there I have saeco gran baristo keeps saying "add coffee" It is full of coffee Grinder cleaned and adjusted, encoder sensor cleaned, pump changed. Any idea? Thanks
I've had one of these machines for almost 10 years, and absolutely love it! I clean the main mechanism on the right side on a regular basis, along with periodic descaling. I've made countless espressos with this little machine and it's worked flawlessly since I bought it. I have noticed recently, however, that one of the two holes in the dispensing nozzle wasn't pouring at the same rate as the other one. It still poured the same amount of great tasting espresso, but I figured it was time to clean the dispenser. Your video has provided me with information on how to do that. Thanks for putting this video together and sharing the knowledge! Cheers
Good directions. Main challenge was cutting through the glue building down the top of the dispenser. Ended up cracking the plastic for the top but re-sealed with food safe silicon. Lots of coffee gunk cleaned out after 8 yrs of use. Thanks
Thanks, very helpful. I've just cleaned mine.
Thank you very much... my xsmall is working perfectly now. Thank you very much. But I cleaned with water without removing the glue and just put the plastic in the holes to clean the internal coffee dispenser.
Thanks, helped me to clean the dispenser.
Very helpful, thank you for sharing.
Hi Milen.
Thank you for your videos!! Great help.
Thanks a lot for helping us!!!
Thank you for your video!!!
Many thanks!!!
Do you possibly know, why the pump works slow when frothing? (xsmall). Before it worked in two phases - slow initially and faster after 5 or 10 sec. Now my pump does not speed up to the "second phase". It stays pumping slow and frothing is not very efficient???
Xmall horror espresso machine :D i have similar problem but not leaking one side, i used spike :D
Hi there I have seaco xsmall that often wasting fresh brew coffee powder without brewing coffee. I noticed pressing the beans down while grinding might works little better but not always. not sure what is the prob. Disassemble the grinder and cleaning would help you think?
Como desmontar a carcaça para troca da bomba
Hello.
After turning the machine on, on the right side the green temperature light lights up and the right red exclamation side is flashing rapidly.
Do you have any idea what could it be?
It still makes coffee...
it's asking for descaling :)
I have a question regarding a Saeco Aulika. I had a small piece of metal in the coffee beans. The grinder was blocked. I checked, the of the small metal bolts where displace. Put everything back.... And the grinder does not work. It shoes “heating” or add coffee, but it does not move. Is there maybe a fuse somewhere that burned..??? Can you or anybody help me.
Ths
Hi there I have saeco gran baristo keeps saying "add coffee"
It is full of coffee
Grinder cleaned and adjusted, encoder sensor cleaned, pump changed.
Any idea?
Thanks