First normal tech video in the new house!!!! 🎉 (apologies for the not-so-great audio quality - we’re currently in the process of furnishing the house and it’ll improve very quickly as soon as that happens!)
Truckers. That's who the portable kettle/thermos devices are primarily for. It's not a case of making your coffee and taking it to work, so much as waking up in your cab, starting work by getting on the road, and meanwhile have the coffee brewing beside you. It also takes up far less space, and is much less likely to spill/leak/break when driving over rough surfaces like dirt roads.
Was looking for a comment like this. The portable kettle has many applications. It could be that you're even at work (or anywhere) where there's no coffee/tea station and you are able to warm water on the go
For the kettle, it's actually for people who want to use their own kettle in hotel rooms. In China where Xiaomi is from, people are very anxious about hotel kettles being used by previous guests to either boil instant noodles, or boil socks to get it clean. Not sure how much of these rumors are true, but it ended up many people would bring a whole kettle with them on trips. Xiaomi just saw the opportunity here and jumped in with a portable one.
Hey now, filament printers only look that bad when they fail 😂 the resin printers are amazing for print quality but def be careful around the uncured resin. Don't touch it and def dont wash it down the sink it has huge aquatic toxicity 😅
Please dont use a resin printer without protective gear, the fumes are toxic and if there are uncured resin on the surface of the print, touching it isnt ideal/safe. Use gloves and masks while dealing with these kind of printers
I bought a Xiaomi vacuum robot for 250 bucks from aliexpress in 2018 almost as a joke because i could not believe it could actually work since the iRobot one was 1000 back then. When I received it and unpacked it, I already had to raise an eyebrow. It felt beautifully made, sturdy and smooth as silk. When I started the clean job and the lidar started to map a picture of my apartment, started to really lose my words. Now, 6 years later, it still runs like a charm. Unreal, the quality - and I do mean hardware to electronics, reliability, design, just everything, is second to none when it comes to Xiaomi. And I say this as somehow rather suspicious and critical of all things China.
It really doesn't. The UK and US are still suffering from their Puritanical periods. Censoring words, using euphemisms, seing phalluses in *everything*. It's a massage gun. For massaging. For people who can't be arsed to use their fingers.
Please use the proper PPE for the resin 3d printers, the fumes are toxic, thats why they specifically told you to open the window, but that wont be enough, you need to have an actively ventilated enclosure. You also need gloves, masks, and other PPE for when you're handling resin, don't forget that resin is toxic, wayy more than filament based 3d printers
I honestly can't tell if he didn't know, or if he was trying to make the printer look more convenient to use. But it probably doesn't help that the manufacturer of the printer doesn't warn you and instead tells you it uses "environmentally safe materials", which makes it sound like it is safe to inhale and touch.
Eh, the masks are a bit of a luxury, I’d say, but you definitely need to be handling resin with gloves. Or you’ll develop an allergy to it rather quickly. Not to say that resin fumes are good for your lungs, but a lot of modern resins aren’t quite as horrid as they used to be
He also completely messed up his explanation of how it works, they don't work like that at all. He didn't cure it afterwards either which is very important.
My wife has had a Xiaomi scooter ,we have their fan 2 lite and fan 2 pro as well as their 2 smart bedside lamps and we LOVE THEM. Our home is slowly starting to turn into a cost effective smart home through Xiaomi
In defense of battery packs on cordless screwdrivers: For heavy users it is way better to be able to switch out battery packs, so you basically never have to stop working if you have two or three battery packs, while you have to wait regularly for it to charge if you have to charge it with a cable. For casual users on the other hand that is fine. So for casual users that $35 is amazing and the product looks really neat, but if you plan to use it for hours on end you should get one with battery packs. Talking from experience.
What does that have to do with lacking a usb c charging port? Imagine you could charge your tools without a proprietary docking station for your batteries! We will get there eventually
Just a warning from a 3D printer guy. The UV resin most 3D printers use is toxic until cured under UV light and washed in Isopropyl alcohol. I am unsure if it is the same as the 3D pointer in this video, but it is something to consider.
The issue is always the resin and it's always dangerous. There are ones that are extremely toxic and can cause chemical burns (mostly off the market now) and the other side of the spectrum, most reputable brands like Sunlu or Elegoo resins are just bad for your health but won't knock you out or immediately hurt you if you just inhale them a bit. Ventilation is key
I use Xiaomi G10 vacuum cleaner and yeah, it's sleek, low noise profile, my cat doesn't run away from it, he ran from previous one. It has few attachments for more in depth cleaning [like pet hair] and even add-on for the main brush that dispenses water, so you can clean and mop in one go. I bought 2 more for my sisters and they are happy as well. There are 3rd party addons too, but the version I've bought had every brush and tip + a wall stand so I can hang it and it charges itself. Easy 8+/10 [though I WOULDN'T buy anything else at this point, just trying to be a bit objective with the score]. Hope it helps.
I stumbled onto Xiaomi's UK store a few years back expecting it to be cheap temu/wish crap but was shocked at how good it is. I own several of the products you reviewed and some you didn't and they're all working perfectly years later. Also their ballpoint pens are exceptional and the only pens I'll use now.
Clarification: portable kitchen gadgets are for travelers. My colleagues when they go on business trips they carry portable kettles, rice cookers, blenders etc. A kettle is the most useful one because you can use it to make tea, instant noodles, instant rice etc and that helps you with saving time (since you don't have to find a kettle or use the dirty hotel ones), saving money (since you don't have to worry about how expensive the restaurants around you are, and plus it is just super convenient since it is portable and small. For some it also makes them feel at home, especially if they are travelling abroad and can't get used to the local food. Side notes: 1. Xiaomi in China is almost half or one third the price you pay for internationally for all gadgets. 2. I have a smart laundry hanger from Xiaomi, a water filter, all my switches, small sensors, MiniLED TV, Aircons, washing machine, light bulbs, lamps, cctv cameras, baby monitors, smart speakers, chargers, fridge, stove, exhaust, fans, cleaning robot, weight scale, literally everything from Xiaomi, heck even my hair dryer, tooth brush and my water pick are from Xiaomi. It's because I can buy something made by Xiaomi and not have to worry about it not being incredible value for money, but also I can access everything in just one app. 3. I'm not from xiaomi, just a fan.😂
@@Woodsie_Lordtarrifs... lots of them... the west(us) is scared of just how good(and efficiently created) Chinese tech is. They believe the US makes best... which has pretty much never been true, even their space program was built from the knowledge of Germans. They idolise Ford because he "created" the mass manufacturing process for cars... even though they did it first.... Now they have a South African trying to advise on sorting their goverment😂 Considering the US is so anti globalist they don't half love using the rest of the world for their benefit( at least the British know that we grew through the help of the commonwealth)
you missing the point of a portable kettle: taking trips. Most hotels do not supply kettles and this can easily be packed in your luggage and taking minimal space.
Was about to say the same. This is brilliant. You pack your hot drink, you drink it on the go, and you can make more as you get to any plug in your hotel room, train seat, workplace… Christmas sorted.
and work, some people working 12 hour shifts with a canteen that is far away would appreciate being able to have more than just a warm drink, or soup etc.
The kettle seems like a genius idea honestly, you can reheat your tea or coffee in your car for example or if you're camping you can use a power bank and won't need to leave your tent, I can 100% see how that would be convenient.
Something can be well designed but still not very useful. Basically all Brits already own electric kettles so I can understand why this would be useless to Arun.
@@MoonThuli I just find it not fair to give it a low raiting because it's not useful to him. The kettle worked perfectly and for many people it can be useful. That's like if I review a juicer which works perfectly but I give it a bad raiting because I don't drink juice.
@@kamencic The difference is, Arun said in his video he doesn't know the use case for it. In your comparison, it's more like he doesn't know what you use a juicer for.
Hey Arun! The printer you have there is a resin printer, it prints using photocuring resin, and that stuff is dangerous. The uncured resin is toxic and can get under your skin, wearing nitrile gloves when handling it is a must, and so is proper ventilation in the room. Also, filament or FDM printers aren't usually as bad as the pictures you showed us :) FDM printers can also produce really clean and good looking results (even the cheap ones) while being much safer and faster! Resin printers are generally used to print small objects that have a lot of detail, like figurines for tabletop games.
Have used some Xiaomi gadgets in the past, and the best way to describe it would be "if Apple designed something, but kept it user friendly and affordable". Also the quality and functionality is so good that if something has been offered, then it is probably in the top 1% of that particular category.
My take on xiaomi is if utilitarian meets comfort design. It will never be apple. But Apple will never be xiaomi. And altho I'm not a fan of the Chinese government I am a fan of xiaomi.
4:33 I don't own a 3D printer and am in no way in the field. But I was at Microcenter one day just checking out the 3D printer supplies and stumbled onto the resin supplies. I was absolutely SHOCKED 😳 at the warnings for resin and the importance for ventilation; even with getting uncured resin on your skin. It was so bad that my subconscious put it in the same dangerous category as Mercury. Uncured resin and its fumes are extremely cancerous; LITERALLY. Please never do this ventless resin printing again.
Even if you don't get cancer, continued exposure to uncured resin leads to severe irritation of skin and lungs that can be chronic. You need nitrile gloves and respirators if you are in the same room as working printer and/or handling uncured prints. I'm shocked the only warning he got is "open a window", like that would be anywhere near enough.
I have this screwdriver, got it like a year ago... it's actually amazingly practical for day-to-day tasks. It's not at all a professional, industry-standard tool. But for a quick tool to mount something, assemble something from IKEA... it's amazing! Totally would recommend.
@@MayonnaiseOnATable that's not a good thing though and there is no real reason why they have to use proprietary batteries, inside the case they are practically the same.
I have the precision one and it is very good, comfy to hold and easy to use plus the extra long bits it comes with are very useful. The rest of the bit selection is good too.
25:00 Do not leave the top off of a resin printer, and do not leave resin in the printer, it will solidify and ruin the printer. That orange is a light filter.
The resin stays liquid as long as no uv light hits it. I have fdm-printed a light tight cover for the resin vat that i remove just before printing. @BenMillen is right - only the pigments sink to the bottom. Just stir them back in with a plastic spatula to avoid damage on the FEP foil.
Fun fact: you aren't supposed to place drills standing up because if it falls it will damage the thing you are working on (if you are placing it on tile and it falls it will crack it)
I love my Xiaomi Blender, Airfryer, Rice Cooker, Screwdriver Set, Camping Light, Fan, Suitcase, Monitor Light bar and Vacuum. I'm otherwise an Apple person but Xiaomi has super affordable and durable products which I really cant live without.
3:36 these LEDs you pointed to are actually for curing process. There’s another set of projection array shooting light up from underneath the printing bed solidifying the resin.
This seems like he was given every product and told to make them sound revolutionary when it's a basic resin printer with a built in curing light and DRM
2:50 - ARUN, I would say the thermos is for ppl who want to just put water in (or fill it at work/school) & bring a tea bag or coffee/coco mix to make at your destination...
It would also be useful on road trips and other areas where you are away from home, but don't want to bring a whole kettle. This product actually seems super useful to me
It’s actually for Chinese people who will fill their thermos up with loose leaf tea before leaving for the day and will constantly add water and use the tea throughout the day
@@AliathTheMan-kx6sk "Uncured photopolymer UV resin is not safe on the skin as it can quickly be absorbed through the skin and result in irritations. Negative effects may not be seen straight away, but after repeated exposure, you can get highly sensitive to UV resin. Fully cured resin is safe to touch."
I do work at Xiaomi so it's so interesting to watch Arun use all of our smart home gadgets it's like me watching how would our customers react when they first bought our device 💙
Bro, i dont know if you are responsible for the laser measurements or not but it is such an awesome tool and it is perfect for my job. You have my atmost respect and appreciation
as an interior designer i'm super impressed by the laser measurer. the fact that it can generate the layout plan based on the measurements you've taken would save me so much time! i'm considering getting one now.
10:00. I've been watching these 'gadgets' videos for almost as long as you have been doing them, and don't think I have ever seen you give a product TEN out of TEN before.
@@geedeleo its not, it would be illegal if he didnt disclose that and i dont see the point of accepting a sponsorship from a company that well reputed for supplying quality products for a cheap ass price
@geedeleo how so? It's not like he hasn't done a single company name before, is it? This is what Arun does, and he's very good at his job. In fact, I wish I'd known about the cordless screw driver before. It's probably far more powerful than the bosch one i bought from a big tool supplier. Plus, this one is far cheaper than the one I bought too.
@@Gotei_captain I am using an Ad Blocker and the entire video has been labled as an ad. Same thing with Marquez brownley's DJI video. Its fine if you want to turn a blind eye
glad someone is making more videos about xiaomi they are amazing and aesthetic yet affordable at the same time. their ecosystem is highly adopted in china and wish to see them shine in other countries as well
Do not translate! បេះដូងអ្នកនឹងឈប់លោតក្នុងរយៈពេលប៉ុន្មានម៉ោងទៀត មធ្យោបាយតែមួយគត់ដើម្បីកម្ចាត់បណ្តាសានេះ គឺការជាវឆានែលរបស់ខ្ញុំ។…..
12:09 - I have this product and it is awesome to have at the price it costs. About the display being a bit brighter at night you can ask the assistant to turn off the display and it turns of all pixels so there is no light being emitted. Only downside is if the internet cuts out your room becomes blinded by the backlight as the display turns back on if it is connecting to internet.
FOR THE RESIN PRINTER PART: 1. Xiaomi isn't the only brand making resin printers! They are quite common for "normal" people to have in their house. 2. Xiaomi's printer's app being able to show the supports is also very common with consumer-friendly 3D printer apps. I know Bambu Lab's app has it (because I have the A1) and am sure many other printing apps and software have the feature too.
Yeah, i don't expect him to be a professional at it, but he clearly didn't do a single second of research and apps/slicers have shown 3d models and supports for over a decade. How else would you even know what you are printing.
@@Blox117 I think he meant more of an "average" consumer. And yes a bunch of "normal" people just buy 3d printers to print things for their DND campaign or even just to try them out. And especially FDM/filament 3d printing is really common these days.
I am already at a point where I look for stuff from Xiaomi when Im searching for anything new instead of analyzing the market. It just always works and I never had issues. Talking about phone, smartwatch, air fryer, rice cooker, ceiling lamps, bedside lamp, tablet, kettle, screw driver so far.
I like the way you convey audience that 'these are not only compatible with Android but iphone too ' using switching phones that you are using ..... Nice 👍🏼
3:50 With a decent 3D printer this isn't much of a problem. The main benefit of resin is that you get a more detailed print. The layers are significantly smaller when compared to filament based printers. The big downside is in postprocessing. For most filaments after printing you just break the supports and you can be done. (You of course do more but it's not a safety issue) With resin you need to clean the part to remove excess resin and most need a post cure process. Resin printers are also smaller for the price. There are many other differences as well.
![Gunna - HIM ALL ALONG [Official Video]](http://i.ytimg.com/vi/w7Wf0h1Q8a4/mqdefault.jpg)
First normal tech video in the new house!!!! 🎉 (apologies for the not-so-great audio quality - we’re currently in the process of furnishing the house and it’ll improve very quickly as soon as that happens!)
Who like Mrwhosetheboss then like subscribe this comment ❤
All gssss
No worries man ,just keep up the good work ❤👍
"normal" 😭😭
It's still good! Keep up the work!
Truckers. That's who the portable kettle/thermos devices are primarily for. It's not a case of making your coffee and taking it to work, so much as waking up in your cab, starting work by getting on the road, and meanwhile have the coffee brewing beside you. It also takes up far less space, and is much less likely to spill/leak/break when driving over rough surfaces like dirt roads.
Tradesmen too
Was looking for a comment like this. The portable kettle has many applications. It could be that you're even at work (or anywhere) where there's no coffee/tea station and you are able to warm water on the go
and the drop he mentioned, was clearly just condensation from the exhaust ports, no way around that if you have vents for the steam
I would've guessed it's marketed at their Chinese audience, since hot water is a very common drink there.
It seems pretty straightforward to come up with potential uses for this honestly
16:50 you vs the gadget she told you not to worry about...
😂😆
😂😂😂😂😂
Fr
😭😭😭😭😂🤣
Yeees that's what I was saying 😅
For the kettle, it's actually for people who want to use their own kettle in hotel rooms. In China where Xiaomi is from, people are very anxious about hotel kettles being used by previous guests to either boil instant noodles, or boil socks to get it clean. Not sure how much of these rumors are true, but it ended up many people would bring a whole kettle with them on trips. Xiaomi just saw the opportunity here and jumped in with a portable one.
Even in the West, air crews frequently wash their knickers etc in the kettle and coffee machines
Agreed, I'm a home user, would love to have my water at a specific temp. Also, next to my work table and constantly be able to charge it.
@@jaqian pour that water straight into my cup
@@AxenAider What?
Boil socks to clean? What's wrong with people
Hey now, filament printers only look that bad when they fail 😂 the resin printers are amazing for print quality but def be careful around the uncured resin. Don't touch it and def dont wash it down the sink it has huge aquatic toxicity 😅
Thanks for the heads up! I should have paid more attention to the warnings!!
@@Mrwhosetheboss just like with *YOUR* gun. IShowTechMeat.
xiaomi is truly ahead of its time with some stuff man...
VERIFIED
Agreed
😮😮
@@enderlad495 no way no way no way no way no way no way no way no way
bot
Please dont use a resin printer without protective gear, the fumes are toxic and if there are uncured resin on the surface of the print, touching it isnt ideal/safe. Use gloves and masks while dealing with these kind of printers
yes it is very dangerous
thats what they taught me on first class of my lab when I started mechanical engineering haha
First year? Which lab?@@roro-v3z
And DO NOT wash directly under the sink
Bro the massage gun😂
I bought a Xiaomi vacuum robot for 250 bucks from aliexpress in 2018 almost as a joke because i could not believe it could actually work since the iRobot one was 1000 back then. When I received it and unpacked it, I already had to raise an eyebrow. It felt beautifully made, sturdy and smooth as silk. When I started the clean job and the lidar started to map a picture of my apartment, started to really lose my words. Now, 6 years later, it still runs like a charm. Unreal, the quality - and I do mean hardware to electronics, reliability, design, just everything, is second to none when it comes to Xiaomi. And I say this as somehow rather suspicious and critical of all things China.
I have s5max since like 2017😁 still works, but had to replace wheel once and battery
That massage gun needs a few disclaimers 16:47
exactly😂😂
Warning: may give you a good time
i was searching for this comment thx :D
It really doesn't. The UK and US are still suffering from their Puritanical periods. Censoring words, using euphemisms, seing phalluses in *everything*. It's a massage gun. For massaging. For people who can't be arsed to use their fingers.
@@Clone7568hshahaha no wayyyyyy
16:49 biggest pause moment in mrwhosetheboss history💀
😂😂
Fr 😂
continue 😩
Why pause? And how many times u replayed?
Please use the proper PPE for the resin 3d printers, the fumes are toxic, thats why they specifically told you to open the window, but that wont be enough, you need to have an actively ventilated enclosure. You also need gloves, masks, and other PPE for when you're handling resin, don't forget that resin is toxic, wayy more than filament based 3d printers
Jeez glad someone mentioned it, couldn't believe it when he just grabbed it with his bare hand.
@@MelSavageKiller And washed directly in the sink...
I honestly can't tell if he didn't know, or if he was trying to make the printer look more convenient to use. But it probably doesn't help that the manufacturer of the printer doesn't warn you and instead tells you it uses "environmentally safe materials", which makes it sound like it is safe to inhale and touch.
Eh, the masks are a bit of a luxury, I’d say, but you definitely need to be handling resin with gloves. Or you’ll develop an allergy to it rather quickly. Not to say that resin fumes are good for your lungs, but a lot of modern resins aren’t quite as horrid as they used to be
He also completely messed up his explanation of how it works, they don't work like that at all. He didn't cure it afterwards either which is very important.
My wife has had a Xiaomi scooter ,we have their fan 2 lite and fan 2 pro as well as their 2 smart bedside lamps and we LOVE THEM.
Our home is slowly starting to turn into a cost effective smart home through Xiaomi
A shame they are a Chinese company. They don't have laws that protects consumers in China.
Being a good product doesn't matter.
In defense of battery packs on cordless screwdrivers: For heavy users it is way better to be able to switch out battery packs, so you basically never have to stop working if you have two or three battery packs, while you have to wait regularly for it to charge if you have to charge it with a cable. For casual users on the other hand that is fine. So for casual users that $35 is amazing and the product looks really neat, but if you plan to use it for hours on end you should get one with battery packs. Talking from experience.
The proprietary-ness does suck tho.
You can use any
What does that have to do with lacking a usb c charging port? Imagine you could charge your tools without a proprietary docking station for your batteries! We will get there eventually
您只需要一个移动电源，问题就解决了
And most times, the part that fails often is the battery, so the battery packs are better long term.
Just a warning from a 3D printer guy. The UV resin most 3D printers use is toxic until cured under UV light and washed in Isopropyl alcohol. I am unsure if it is the same as the 3D pointer in this video, but it is something to consider.
They're all toxic.
The issue is always the resin and it's always dangerous. There are ones that are extremely toxic and can cause chemical burns (mostly off the market now) and the other side of the spectrum, most reputable brands like Sunlu or Elegoo resins are just bad for your health but won't knock you out or immediately hurt you if you just inhale them a bit.
Ventilation is key
The resin this printer uses is made to be washed in water, as specified on their website
@@ElectroniK water washable means you don't need to use isopropyl alcohol to clean it.
It doesn't mean you rinse the model in the sink.
And that’s why you get a filament printer
We need a Part 2 with the toothbrushes, pens, shavers, compressors, security cameras, vacuum cleaners, rice cookers and all the stuff we missed!
I use Xiaomi G10 vacuum cleaner and yeah, it's sleek, low noise profile, my cat doesn't run away from it, he ran from previous one. It has few attachments for more in depth cleaning [like pet hair] and even add-on for the main brush that dispenses water, so you can clean and mop in one go. I bought 2 more for my sisters and they are happy as well. There are 3rd party addons too, but the version I've bought had every brush and tip + a wall stand so I can hang it and it charges itself. Easy 8+/10 [though I WOULDN'T buy anything else at this point, just trying to be a bit objective with the score].
Hope it helps.
Water filters, body scales, doorbell cameras, rice cookers...
And Xiaomi car.
Xiaomi Rice Cooker is THE best rice cooker in China. It is sold for millions a year, and the rice it produces tastes better than other brands.
@@PolyAndroidBenzene I’m excited for the Xiaomi SU7 too but I don’t think Arun could it get in the UK like he imports some other tech.
You'll never see this, but huge thanks from Finland! Your videos are entertaining and satisfying to watch. Thank you for the content!
You HAVE to ventilate the room with the resin 3d printer, as the fumes can be carcinogenic.
Womp wono lil bro
@@shanescottkristianbackup-cp1fxStop being so immature it’s just true, and it would be him in danger anyway, wouldn’t apply to the commenter
@@5DPixel womp womp lil bro
@@shanescottkristianbackup-cp1fx 2/10 ragebait, try harder next time
@@prizecounter1 cry about it
I stumbled onto Xiaomi's UK store a few years back expecting it to be cheap temu/wish crap but was shocked at how good it is. I own several of the products you reviewed and some you didn't and they're all working perfectly years later. Also their ballpoint pens are exceptional and the only pens I'll use now.
Spoken like a true fan😂
Why
@@CCCC-tq8yo youll never understand the glide of a good pen until you use one and if you write alot you love it
Which one if i may ask@@frankieslefttoe8210
Can u compare with the pilot and uniball pens?
Clarification: portable kitchen gadgets are for travelers. My colleagues when they go on business trips they carry portable kettles, rice cookers, blenders etc. A kettle is the most useful one because you can use it to make tea, instant noodles, instant rice etc and that helps you with saving time (since you don't have to find a kettle or use the dirty hotel ones), saving money (since you don't have to worry about how expensive the restaurants around you are, and plus it is just super convenient since it is portable and small. For some it also makes them feel at home, especially if they are travelling abroad and can't get used to the local food.
Side notes:
1. Xiaomi in China is almost half or one third the price you pay for internationally for all gadgets.
2. I have a smart laundry hanger from Xiaomi, a water filter, all my switches, small sensors, MiniLED TV, Aircons, washing machine, light bulbs, lamps, cctv cameras, baby monitors, smart speakers, chargers, fridge, stove, exhaust, fans, cleaning robot, weight scale, literally everything from Xiaomi, heck even my hair dryer, tooth brush and my water pick are from Xiaomi. It's because I can buy something made by Xiaomi and not have to worry about it not being incredible value for money, but also I can access everything in just one app.
3. I'm not from xiaomi, just a fan.😂
It's not just Xiaomi, everything is cheaper on local market since there is no middleman and various fees.
Taking a rice cooker on a business trip is wild
@@Woodsie_Lordtarrifs... lots of them... the west(us) is scared of just how good(and efficiently created) Chinese tech is. They believe the US makes best... which has pretty much never been true, even their space program was built from the knowledge of Germans. They idolise Ford because he "created" the mass manufacturing process for cars... even though they did it first.... Now they have a South African trying to advise on sorting their goverment😂
Considering the US is so anti globalist they don't half love using the rest of the world for their benefit( at least the British know that we grew through the help of the commonwealth)
@@Tharrel very Asian 😂
I love their Portable Air Compressor for cars and bikes! Very handy
you missing the point of a portable kettle: taking trips. Most hotels do not supply kettles and this can easily be packed in your luggage and taking minimal space.
Was about to say the same. This is brilliant. You pack your hot drink, you drink it on the go, and you can make more as you get to any plug in your hotel room, train seat, workplace… Christmas sorted.
In England at least almost all hotels ik do have
Or if you're at work and want another tea/coffee but don't want to go to the break room
@@ZAWFUL Wouldn't you have to go there anyway to get the coffee/teabag
and work, some people working 12 hour shifts with a canteen that is far away would appreciate being able to have more than just a warm drink, or soup etc.
24:48 I mean they did warn you to open a window😭😭
16:30 Imagine putting up an electrical screwdriver up you face after you mistake it for the massager 💀
You have to be blind not to notice 😂
@@MVpatriotXprobaly a kid
imagine putting it......somewhere else
Damn😂😂😂 how can u think of that😂😂😂but its good😂😂😂
💀💀🫡🫡
The kettle seems like a genius idea honestly, you can reheat your tea or coffee in your car for example or if you're camping you can use a power bank and won't need to leave your tent, I can 100% see how that would be convenient.
You did injustice to that kettle. It's really good at what it's designed to do!
ITA!
Something can be well designed but still not very useful. Basically all Brits already own electric kettles so I can understand why this would be useless to Arun.
@@MoonThuli I just find it not fair to give it a low raiting because it's not useful to him. The kettle worked perfectly and for many people it can be useful. That's like if I review a juicer which works perfectly but I give it a bad raiting because I don't drink juice.
@@MoonThuli It is meant to be for Travelers!!
@@kamencic The difference is, Arun said in his video he doesn't know the use case for it. In your comparison, it's more like he doesn't know what you use a juicer for.
Him: "Good morning"
SmartClock: "Good afternoon".
You can't fool me!
That got me😂😂😂😂
And it showed him he was wrong with Steez and Proof😂
@@aarontruth 😅
16:58 that’s what she said
XD
Hey Arun! The printer you have there is a resin printer, it prints using photocuring resin, and that stuff is dangerous. The uncured resin is toxic and can get under your skin, wearing nitrile gloves when handling it is a must, and so is proper ventilation in the room. Also, filament or FDM printers aren't usually as bad as the pictures you showed us :) FDM printers can also produce really clean and good looking results (even the cheap ones) while being much safer and faster! Resin printers are generally used to print small objects that have a lot of detail, like figurines for tabletop games.
Have used some Xiaomi gadgets in the past, and the best way to describe it would be "if Apple designed something, but kept it user friendly and affordable".
Also the quality and functionality is so good that if something has been offered, then it is probably in the top 1% of that particular category.
My take on xiaomi is if utilitarian meets comfort design. It will never be apple. But Apple will never be xiaomi. And altho I'm not a fan of the Chinese government I am a fan of xiaomi.
@jojojojo4332 you say you dislike the Chinese government. What's your take on Huawei
@@jojojojo4332 what's wrong with this Chinese government? Their country is doing a whole lot better than the western countries.
@@jojojojo4332 I mean, what wrong did the Chinese government even do? At most 5% of what the US government does in and out of the US
@@jojojojo4332 Chinese gov is not your gov, why would you care?
4:33 I don't own a 3D printer and am in no way in the field. But I was at Microcenter one day just checking out the 3D printer supplies and stumbled onto the resin supplies.
I was absolutely SHOCKED 😳 at the warnings for resin and the importance for ventilation; even with getting uncured resin on your skin.
It was so bad that my subconscious put it in the same dangerous category as Mercury.
Uncured resin and its fumes are extremely cancerous; LITERALLY.
Please never do this ventless resin printing again.
Yeah it's such an hassle that i had to sell my printer after 2 months.
fdm 3d printing is awesome tho
Even if you don't get cancer, continued exposure to uncured resin leads to severe irritation of skin and lungs that can be chronic. You need nitrile gloves and respirators if you are in the same room as working printer and/or handling uncured prints. I'm shocked the only warning he got is "open a window", like that would be anywhere near enough.
@Lxght_Lxght fmd printing is also producing toxic fumes btw.
@@zeogamingmc … I print with it in my bedroom and sometimes overnight. I only use pla and i’m pretty sure it’s fine… right?!
I have this screwdriver, got it like a year ago... it's actually amazingly practical for day-to-day tasks. It's not at all a professional, industry-standard tool. But for a quick tool to mount something, assemble something from IKEA... it's amazing! Totally would recommend.
Yeah, that makes sense, the thing he said about the propirety batteries in screwdivers is just wrong, all good ones have proprietary
@@MayonnaiseOnATable that's not a good thing though and there is no real reason why they have to use proprietary batteries, inside the case they are practically the same.
I have the precision one and it is very good, comfy to hold and easy to use plus the extra long bits it comes with are very useful. The rest of the bit selection is good too.
@@conorstewart2214 They are not - Give a construction worker the choice and they'll choose proprietary
Does it have speed control?
18:29 😂😂 we caught it 😂😂
25:00 Do not leave the top off of a resin printer, and do not leave resin in the printer, it will solidify and ruin the printer.
That orange is a light filter.
I leave resin in my printers all the time, the only time you’ll have issues is with certain pigments settling but then you can just stir the tank
The resin stays liquid as long as no uv light hits it. I have fdm-printed a light tight cover for the resin vat that i remove just before printing. @BenMillen is right - only the pigments sink to the bottom. Just stir them back in with a plastic spatula to avoid damage on the FEP foil.
23:40 dudes having way too much fun spraying his wife... with the water gun.😂
🤨
Don't explain it like that😅
PAAAAAAAUUUUUUUUUUUUUSSSSEEEE PAUSE THE FUCH UP
Yea, now I read it, I see it...
23:41 that's what she said
first review vid in your new home!! loved it! cant wait for the completed setup and more stunning content :)
I work in construction in a cold climate, the heatable thermos is 10/10 WIN!
Josh laughing at 17:09, and what you said doesn't sound right 😂
Finally someone else said that 😂😂😂
The light on the screwdriver is not for the screw to go live. It is actually for seeing better when screwing in the dark. Most drills have that
Fun fact: you aren't supposed to place drills standing up because if it falls it will damage the thing you are working on (if you are placing it on tile and it falls it will crack it)
16:51 are you sure that's a massage gun😂😂😂
Yup, I have one and it's good
@@deenszxking6818 your profile picture tells me otherwise 😂
Its embarrasing
16:46 my guy already bought martial aid.
I love my Xiaomi Blender, Airfryer, Rice Cooker, Screwdriver Set, Camping Light, Fan, Suitcase, Monitor Light bar and Vacuum. I'm otherwise an Apple person but Xiaomi has super affordable and durable products which I really cant live without.
22:21 In the next water gun testing video, I think Dhrisha should be the tester.
yeah, not cool, how dare he his wife as a target . so not a gentleman
@@ahmedabdulhadi-fk2zx its not that deep
00:11 we riot if he dosent get a xiaomi car
WE RIOTTTTTT
Hell Yeah!!!!
Bo they have it in China
Yes. The one that looks like a Porsche.
Don't show MI brand underwear, I am not joking, you can google it. 😂
3:36 these LEDs you pointed to are actually for curing process. There’s another set of projection array shooting light up from underneath the printing bed solidifying the resin.
This seems like he was given every product and told to make them sound revolutionary when it's a basic resin printer with a built in curing light and DRM
@JustANoob1 and he did multiple resin printing no-nos too. I cringed when he didn't wear gloves and flushed resin down the damn sink.
Used that motion sensor light for years!! Love it.
2:50 - ARUN, I would say the thermos is for ppl who want to just put water in (or fill it at work/school) & bring a tea bag or coffee/coco mix to make at your destination...
It would also be useful on road trips and other areas where you are away from home, but don't want to bring a whole kettle. This product actually seems super useful to me
It’s actually for Chinese people who will fill their thermos up with loose leaf tea before leaving for the day and will constantly add water and use the tea throughout the day
@@jonty50 That's super cool and I never knew that! Thanks for sharing
@@ThatOneCat_ Maybe drink water or cola? why tea?😂
@@RELIM_ROhealth reasons, some people like to have hot drinks that are healthier than cola.
22:08 Bro Stop the Cap, you do it for you😂
No Xiaomi cars were used in the filming of this video. 🌚
Thank god. It bothers me that somebody who makes cars makes tons of things too. They got it though. Thanks to theft.
Well. Both Temu and Aliexpress doesn't have the shipment for that available so.. 🤷♂
no one got mkbhd reference 😂
I was just thinking it🤣@@alexa-vw4kr
@@alexa-vw4kr oh...... now I get it....
The massage gun got all of us 😄
24:53 It's why they told you to open that window Arun
17:04 bro is using it wrongly 😏
FR
10:08 im just as shocked as her 😂
2 in 1 video
💯💯💯💯💯
love you videos arun, so pleased for you and the new house. can't wait to see all the new videos coming!
27:02 eyes closed, ears open 💀
😭😭
How you guys do this 😂
18:00 pretty sure u didn’t say the same thing as what was captioned 😂
*banging
24:35 The way my jaw drop as arun touch the uncured resin with his bare hand is shocking
why whts so bad?
It is cured, they use UV for curing.
@@AliathTheMan-kx6skuncured resin is toxic and some can penetrate the skin.
@@AliathTheMan-kx6sktoxic carcinogenic gas
@@AliathTheMan-kx6sk "Uncured photopolymer UV resin is not safe on the skin as it can quickly be absorbed through the skin and result in irritations. Negative effects may not be seen straight away, but after repeated exposure, you can get highly sensitive to UV resin. Fully cured resin is safe to touch."
I didnt know Xiaomi had so many gadgets! Love the design of theri stuff tho! Amazing
The new studio is great so far!!!
Phone ksm jisne subscribe nhi kiya wo pakka exam me fail 😅😂
Bro the video ain't even finished
You've seen one video Lil bro 😭
Yesss
20:20 little did he know he actually sleep walks 😂
16:39 😂 LOL, that's so funny .I'm laughing like an idiot 😂😂😂😂😂😂
I thought i was alone😂
WOW!! That's some kind of a record... 2 products full-rating in 1 episode! Love their stuff!
I saw Xiaomi's new car too...
And it's just as gorgeous as all the other products they make that we can't have here in the U.S.‼️
Poor build quality and one of the worst accidents the SU7s had been in the airbags didn't go off...
SU7 design is copied from Porsche and McLaren so it’s understandable.
The breaks on their car are the size of a ford fiestas 🗑️
while watching this video i was looking on amazon and a lot of the products were available for about the same price and prime shipping
Soon... Don't you worry!
16:40, I'm wheezing 😂😂😂
I started coughing because I laughed too hard 😭😂
MY God 😂😂
I do work at Xiaomi so it's so interesting to watch Arun use all of our smart home gadgets it's like me watching how would our customers react when they first bought our device 💙
What position do you hold at xiaomi? Were you able to test most of these gadgets so far?
@JeremyTryit2 Yes, most of it that are available for global market
Can you tell me how much the battery of the night litght last? 😅
What is the name of the perfume dispenser? @@CheezeBerry96
Bro, i dont know if you are responsible for the laser measurements or not but it is such an awesome tool and it is perfect for my job. You have my atmost respect and appreciation
as an interior designer i'm super impressed by the laser measurer. the fact that it can generate the layout plan based on the measurements you've taken would save me so much time! i'm considering getting one now.
10:00. I've been watching these 'gadgets' videos for almost as long as you have been doing them, and don't think I have ever seen you give a product TEN out of TEN before.
I saw, it was a device that Turned AAA Batteries into AA
Entire video is a sponsored video.
@@geedeleo its not, it would be illegal if he didnt disclose that and i dont see the point of accepting a sponsorship from a company that well reputed for supplying quality products for a cheap ass price
@geedeleo how so? It's not like he hasn't done a single company name before, is it? This is what Arun does, and he's very good at his job. In fact, I wish I'd known about the cordless screw driver before. It's probably far more powerful than the bosch one i bought from a big tool supplier. Plus, this one is far cheaper than the one I bought too.
@@Gotei_captain I am using an Ad Blocker and the entire video has been labled as an ad. Same thing with Marquez brownley's DJI video. Its fine if you want to turn a blind eye
18:56 I could maybe compete with the supersonic speed, but definitely not with the 13-hour duration
LMFAOOOO
the yt emoji at the end too 🤣🤣
that "oh Xiaomi" when he saw the magnetic screws was from the heart
wanted to watch later but found myself watching it right away!great review
16:05
forever a legendary moment of the Mr. Whosetheboss channel.
Xiaomi sells guns now? What did i miss
They're at Samsung's level now, the level where apple can't even compete 💀
They sell the Purifier H20 skin and a nailgun (sorry was making codm jokes)
Xiaomi SU7 (EV Car)
Lol
@funni387
McDonald’s don’t sell spaceships! They can’t even compare to NASA.
What level of stupidity are you people on?
23:53 domestic violence 😂
💀
Pls more Xiaomi things overall. I love these videos
18:43 you know what the thera gun is actually supposed to fit
What?
Xiaomi is that kid in school that’s just as popular as the big shots but doesn’t look it 😂
The moment he pulled out the massage heads .I cracked fr
I am watching him from a while. What a nice guy he is. I like your videos man. Keep it up👌👌
Excited to see the new studio
That massage gun😂😂😂 17:16
24:05 don't expect a man to stop having fun with his new amazing toy... 😂
We need a part 2 of this. Xiaomi makes so many things
16:48 😂 hell nahh the design is wild
22:57 Mode Switc
glad someone is making more videos about xiaomi they are amazing and aesthetic yet affordable at the same time. their ecosystem is highly adopted in china and wish to see them shine in other countries as well
Do not translate!
បេះដូងអ្នកនឹងឈប់លោតក្នុងរយៈពេលប៉ុន្មានម៉ោងទៀត មធ្យោបាយតែមួយគត់ដើម្បីកម្ចាត់បណ្តាសានេះ គឺការជាវឆានែលរបស់ខ្ញុំ។…..
Im excited for your studioo 🤩
This man will be remembered for decades, this man is a true legend
LONGER THAN DECADES
unless he starts selling wallpapers
shut up bot!
@@Leon-zb7ei or speeding in school zones
He might just have lost some years judging by the lack of PPE according to the other comments .-.
I love how he's casually making a video on the floor 😂 Imagine people's reactions if they don't know the context.
What context?
12:09 - I have this product and it is awesome to have at the price it costs. About the display being a bit brighter at night you can ask the assistant to turn off the display and it turns of all pixels so there is no light being emitted. Only downside is if the internet cuts out your room becomes blinded by the backlight as the display turns back on if it is connecting to internet.
17:36 I was eating milk and cereal and I spit milk all over the place. That was hilarious.
16:46 had me dying 😂 come on arun
I think his name is spelled Arun
Its ArUn
😂😂😂
FOR THE RESIN PRINTER PART:
1. Xiaomi isn't the only brand making resin printers! They are quite common for "normal" people to have in their house.
2. Xiaomi's printer's app being able to show the supports is also very common with consumer-friendly 3D printer apps. I know Bambu Lab's app has it (because I have the A1) and am sure many other printing apps and software have the feature too.
Yeah, i don't expect him to be a professional at it, but he clearly didn't do a single second of research and apps/slicers have shown 3d models and supports for over a decade. How else would you even know what you are printing.
and by normal you mean engineers/designers or people interested in crafts
@@Blox117 I think he meant more of an "average" consumer. And yes a bunch of "normal" people just buy 3d printers to print things for their DND campaign or even just to try them out. And especially FDM/filament 3d printing is really common these days.
@@kwedl no most normal ppl dont have a 3d printer. it is still a hobbyist thing
@@Blox117 I never said most, learn how to read. My point still stands, 3d printing isn't nearly as niche/uncommon as people think it is.
I am already at a point where I look for stuff from Xiaomi when Im searching for anything new instead of analyzing the market.
It just always works and I never had issues.
Talking about phone, smartwatch, air fryer, rice cooker, ceiling lamps, bedside lamp, tablet, kettle, screw driver so far.
also vacuums, vacuum robots, floor mop, and tv etc etc. we have some of those at home. problem with some, is repair and spare parts.
their portable air compressor is great. they can even pump up car tires.
Too bad it’s from Beijing
@@sydn2698 whats wrong with that? nearly every single product you own has china as part of its supply chain
I like the way you convey audience that 'these are not only compatible with Android but iphone too ' using switching phones that you are using ..... Nice 👍🏼
A first 10/10 I've ever seen from ypu, well deserved!
3:50 With a decent 3D printer this isn't much of a problem. The main benefit of resin is that you get a more detailed print. The layers are significantly smaller when compared to filament based printers.
The big downside is in postprocessing. For most filaments after printing you just break the supports and you can be done. (You of course do more but it's not a safety issue) With resin you need to clean the part to remove excess resin and most need a post cure process. Resin printers are also smaller for the price.
There are many other differences as well.
Also the "horrible wiry finish" while showing failed fdm prints, like what?
@mrwhostheboss at 10:16 you missed the chance to tell she's the first 10/10 you have given 🤦🤦
he's just like us after all 😞
He missed the aura boost bruh
She was referring to tech mentioning her in same sentence would be rude as it would count as comparison@@arbatikurrahman194
I sleep to your videos... in a good way. Watching tech reviews is so satisfying and calming, and you are so far the best I've ever watched.
23:59 sure.... avoiding the microphone 😏
Hol’ up 😏😏
Wet 😺 😅
@@back-to-new🤯
@BawangProdaksyen me and my wife would make this joke 😃
22:53 they're a huge company yet they forgot to add a simple H to some text
now thats crazy