I wanted to put dually fenders on my truck until I watched this video . You're right; it is a little more complicated with all the parts. Finding a real one is hard to find under 1500. I found one for 2500, but he won't budge.
the other side came off easy.. BUSTING those studs off is some BS... i was MAD i had to delete that footage i was cussing so much while taking the fender off..
@@eulaliolopezjr i gave you a shout out but i deleted it in editing because that project made me so mad.. i will do it in a future video.. i had to watch through a bunch of your vids.. but you show the most info.. i really appreciate that lowering video.. i feel sorry for the person that had to put those fenders on from the factory..
@@chriscraft77022 i really apreciate it and im glad that my videos were able to help you. I myself looked all over youtube when i was doing it and couldn't find anything.
I'm in for a fun time gotta do both sides on my 86 c30 dually. I'm on the hunt for a pair lol. Around my area there are none to be had. Scouring the Internet is no fun.
Hello ive watched a few of your videos and they have helpped. Im currently working on a s10 and ive converted it to a carburetor and i want all the old brittle wiri g out and to run all new wire for the truck. Ive wired the distributor, fuel, and start up. But i cant find any solid videos on how to wire in brake lights. Could you help a guy out?
your truck already has brake lights.. why would you want to rewire them? you would use the existing brake light switch anyway.. rewiring a vehicle is not a good thing to start doing...I had an 82 s10 when I was 14.. there is nothing wrong with the wiring on those trucks
The brake lights already dont work. A electrical fire fried alot of them together and it was one of the wires effected. Since i have a carb and no A/C or ecu i want to just run my own wires for everything instead of trying to pull a harness from a junkyard
ok.. that makes sense.. the brake lights are so easy it’s hard to make a video on them.. you have the switch on your brake pedal housing.. the 12v BAT (always hot) wire goes through that switch back to the brake tail lights. the pedal switch is your off/on ...
@@ryanwebster4534 yes, but hot wire goes through brake pedal switch that should be there.. you dont have to run a ground all the way to the tail lights. i have an AUTOMOTIVE GROUNDS video.. if maybe you dont know all about it.. im pretty sure they use ORANGE 16G for brake lights..
@@chriscraft77022 cool! I really dig your 1ton videos. I have the exact same truck so we are kinda building them together. Can't wait for all the new episodes. Thanks
Авто/Мото
![College Football 25 Road To Glory - Transfer Portal & First Team All-American [FRESHMAN YEAR]](http://i.ytimg.com/vi/U8UYgoKneCo/mqdefault.jpg)
Good tips, thanks for the insight video 👍
Thanks brother video helped out
I wanted to put dually fenders on my truck until I watched this video . You're right; it is a little more complicated with all the parts. Finding a real one is hard to find under 1500. I found one for 2500, but he won't budge.
I thought being in Houston, TX they would be everywhere.. NO..
I was having painful flashbacks while watching this video lol. Im glad im over that. Cant wait too see the progress.
the other side came off easy.. BUSTING those studs off is some BS... i was MAD i had to delete that footage i was cussing so much while taking the fender off..
@@chriscraft77022 o i completely understand you i ran out of curse words while doing mine.
@@eulaliolopezjr i gave you a shout out but i deleted it in editing because that project made me so mad.. i will do it in a future video.. i had to watch through a bunch of your vids.. but you show the most info.. i really appreciate that lowering video.. i feel sorry for the person that had to put those fenders on from the factory..
@@chriscraft77022 i really apreciate it and im glad that my videos were able to help you. I myself looked all over youtube when i was doing it and couldn't find anything.
Thank you so much!!! Do you live near Nashville?? You should go to the squarebody nationals if you haven't considered it before.
I'm in for a fun time gotta do both sides on my 86 c30 dually. I'm on the hunt for a pair lol. Around my area there are none to be had. Scouring the Internet is no fun.
Recently converted my 79 C30 dually into a single rear wheel with a flatbed to avoid those wheel flares that must have been a nightmare
SOMEONE PLEASE HELP WHERE CAN I GET THE HOUSING THAT THE LIGHT in the dually fender sits in any help is greatly appreciated
So you can't put the fiberglass dually fenders on the side of a long bed fleetside fender?
you can.. if you can find some!!! there are just a bunch of parts you may not realize are there..
I already found some fiberglass fenders, but all I have is a fleetside long bed. So I just need to find a cutting template for it now😂
Hello ive watched a few of your videos and they have helpped. Im currently working on a s10 and ive converted it to a carburetor and i want all the old brittle wiri g out and to run all new wire for the truck. Ive wired the distributor, fuel, and start up. But i cant find any solid videos on how to wire in brake lights. Could you help a guy out?
your truck already has brake lights.. why would you want to rewire them? you would use the existing brake light switch anyway.. rewiring a vehicle is not a good thing to start doing...I had an 82 s10 when I was 14.. there is nothing wrong with the wiring on those trucks
The brake lights already dont work. A electrical fire fried alot of them together and it was one of the wires effected. Since i have a carb and no A/C or ecu i want to just run my own wires for everything instead of trying to pull a harness from a junkyard
ok.. that makes sense.. the brake lights are so easy it’s hard to make a video on them.. you have the switch on your brake pedal housing.. the 12v BAT (always hot) wire goes through that switch back to the brake tail lights. the pedal switch is your off/on ...
I have two wires. Ground the first wire, then the second wire, give it constant power, and wire it to the tail lights
@@ryanwebster4534 yes, but hot wire goes through brake pedal switch that should be there.. you dont have to run a ground all the way to the tail lights. i have an AUTOMOTIVE GROUNDS video.. if maybe you dont know all about it.. im pretty sure they use ORANGE 16G for brake lights..
I have the same bed. I want to refurbish. I did not know you can disassemble the bed itself. Did you have to cut pinch welds? or is it all bolted?
there are two spot welds on the tailgate area where the floor meets the sides. the rest bolts together
Off the topic , but how’s the Chevelle doing ?
its sitting there ready for paint... ive been working on my house for the past year and a half..
Do you have any other media platforms?
i hate social media but when i get to 50000 subs i will make them all
@@chriscraft77022 cool! I really dig your 1ton videos. I have the exact same truck so we are kinda building them together. Can't wait for all the new episodes. Thanks
Gotta Replace The Driver's Side Dually Hip Bcuz The Previous Owner Caught A Pole. Ummm Yep, It Can Wait!! 😆
You can buy new ones just bought some for my dually
how much?
Where did u get them ? What's the quality.? And how long did it take to ship?
Your sure you bought whats in this video?
I've been putting this part of project off for awhile but it's time now lol🤬
😮😅