I been in the industry over a decade mostly working on the ground, brought DJI RSC3 PRO. I havent set it up yet, it been days, been busy. The point while I was doing research for a good gimbal, I need one that can go in and out with me as and when I need to hide the gimbal or push it to the extreme when weather is turning conditions. By all that standard, I ask around the shops in Singapore. (I base here) For this DJI Model that I felt was the best. DJI RONIN-M. That Gimbal to me was so stable to the point that I totally adore. Years later, the batteries dying, I check with shop in Singapore, they dont carry that, my mind was thinking, this is so good that no distributor want to bring in to sell? because it hardly spoilt is it? hahah. The gimbal stop production. Thus now watching this... I had a 20 mm sony and now thinking of the 24-70 that was recommended. on my Sony A7iv
The lidar… could you test with the RS2? Officially is not supported, but DJI also says the Lidar works independently from the gimbal… so is kinda dubious
I like your videos, they are very usefull. I have the A7V, RS3 Pro and the Ninja V, but i can only start the video on the Gimbal withe the record button, when i press the record button again the video doesn`t stop. Do you have any idea why this is happening? I would like when you make a video with all your config. The Sony is conected via USB to the Gimbal and without the Ninja V everthing is working fine.
Do you recommend the RS3 over the Crane 2S for the A7 IV? I recently purchased the 2S on sale for $279 and I'm wondering if it's a better value than the RS 3 for $550.
That’s a tough one. Build quality, algorithm, auto unlocking, video transmission is much better on the DJI RS3. Whether it’s worth the price difference is all up to your budget
Would like to add the RS3 on top of my RS2 as well as the accessories all same ! The auto focus in RS3 seems better than last version as well Thank you for your review brother.
How do you get it to fully lock up? I’m pretty pissed I bought the rs3 pro and it doesn’t even fully lock up. I reached out to DJI and they said It’s designed like that. In all the reviews I saw nobody said anything about the arm not folding up completely.
Hey Jason! Great videos, thanks so much for the down low. I'm still confused on one point though... the DJI website does not list the Fx6 as a compatible camera. Will the lidar and auto focus for manual lenses still work for Fx6?
Great video as always! This question may be stupid, but is it possible to use the Sony A7s3 w/heavier lenses like the Sigma 24-70 on the RS3 Pro? I'm thinking about future proofing myself and buying the RS3 Pro. I currently have the RSC2 and it seems when I use my current camera and lens set up, I get error messages saying that the front payload is overloaded and/or that the gimbal can't auto tune when locked, even though it is clearly unlocked. This causes a constant auto tune timeout and is frustrating when I'm shooting weddings and have to opt not to even use it because of this.
Hey Jason, I wonder whether you can make a video about how to balance the fx6 on the dji rs3 Pro. I tried a few time to balance it according to the official dji video for teaching people how to balance their camera on their first time using the gimbal but it doesn't work on the fx6.
Hi, if the sony a74 isn't supported with the ronin rs 3pro. How is it possible to use it? I am new to this so I want to be sure that I don't buy a lemon.
Hi jason! Thank you so much for this impressing Video. Do you think you could provide us with a video on how to properly Setup the Rs3pro with a fx6 in terms of balancing and where two mount monitors etc. ? Your setup looks so neat on your videos!. It is my first Gimbal ever and I do own a fx6 for 1.5 yrs now so I am still not that confident on how to balance etc. Thank you so much for your help!
Hi Jason. I have been using DJI gimbals, since the first baby one. I now have the RS 2 kitted out with side handles and second control handle. As well as the remote mounting kit. Love it, especially with my A7 IV (I first bought it to use with my RX10 but was wary of zooming that long lens). I have rigged my stripped down FX6 on the RS 2, but would like the extra capacity of the RS 3 Pro, so that I can add more to the camera, mics etc.
Love your videos that's what convinced me to get the sony a7iv. Please can you help to setting it up on streamlabs obs with a fe 24-105mm lens for streaming
am just an enthusiast, not pro at all. I use an a7iii with Tamron lenses… plus, I rarely use manual focus lenses. With this in mind, I simply won’t need RS3 Pro. However, I really really want the Transmission system and the active track. For this, I understand I can use the Transmission system along with RS3 and that should be enough. I will be losing out on LiDar support. I’m tempted by the carbon fiber body, and I may find the smaller handle slightly less comfortable. But what else will I be losing if I go with the RS3 and not the RS3 Pro?
Aloha Jason! I just got my rs3, and I'm trying to connect it to my a7siii, so I can control the settings right from the gimbal. It doesn't seem to work, although DJI's website says the camera is compatible to do this. Do you have any insight? I've watched some videos on how to do it for the rs2, and thought it would be the same, but still no dice. Do you have any ideas? The rs3 only came with a USB-C to USB-C, do I need a different cable?
Would you mind sharing the millimeter distance from the LiDAR to the A7iV sensor? From the hot shoe I just got this thing and I don’t have anything to measure it with and since you use the A7iv all the time I thought you might know off the top your head. Thanks in advance.
I ordered the RS3 Pro. I haven’t had a gimbal and felt like it was time to get one. Strong enough for my Komodo and C70 and has the Tilta ecosystem to make it more functional. Excited to give it whirl
Great video. Do you have the atomos ninja v connected to the gimbal/ camera? I'm interested to find out the name of the part you you've used to attach the monitor to the dual grip. Would be great to hear from you. Thanks.
Do you know if the RS3 Pro has the sensitivity setting? My DJI Ronin S has follow speed, deadband, and sensitivity, but when I tried the RS2 it only had follow speed and deadband (I heard the SC2 has it, so I wondered if they brought it back)
I wish someone would do a direct comparison video of the Feiyutech Scorp and this DJI RS3. You made great reviews of both of these gimbals but a direct side by side comparing the two would be amazing
So the RS3 works with the Sony A7iv? On their website it doesn’t have it in the compatibility list.. but I want to purchase it for the auto lock so I hope it is conpatible.
Hi Jason, great video, thanks! Q: How much lens weigh the RS3 can hold? I own a few Sigma Art lenses (35mm, 85mm, 14-24mm, 600 to 800 grs) and would like to know if it works with this lenses and my A7iv before buy one. Thanks in advance.
... and without one single word about portrait mode shooting. Can you switch to portrait mode with one button press without dismounting the camera from a gimbal ? How stable is?
Been steady rockin the Ronin S for years until the rs3. None of them had enough features for me to feel like it was time to ditch ole faithful. But I do believe the time has come
Just wondering if you have the same problem, I just unboxed mine this week and did a software update on the RS3, I connected my A7iv via Bluetooth, but the record button doesn’t respond, It says it’s connected but it won’t record with the Record button, I do all the steps right, first turn on the RS3 followed by my camera, 🧐
Great cinematography Jason, the camera work and colour grading is on point! I live in Brisbane and seeing some of those shots of familiar locations has inspired me to do better. Istarted following you when I got my A7IV and was loooking for some things. I'm a hobbyist but working up slowly to try and pruduce content like yours. Also r u ripped coz of all the gear you lift everyday ahah
Hi Jason how would you rate the the scorp pro series from feiyutech to the Ronin RS3 series. Very hard to make a decision without testing both so your advice would be much appreciated
Hi there - thanks for your videos - they're great. I'm confused as to why DJI don't recommend the A7iv for the RS3.... so it does work fine?? And is the RS3 ok for the A7iv with the 24-70GM2 lens? Slightly burnt as the Manfrotto MVG220 was too small for them together! Rather not fork out for the RS3 Pro unless I have to..
Hi Jason I have a FX6 and a FX3 ..Can Rs3 handle FX6 (without the top handle and grip)..? I dont need the focusing motor or the transmitter facility snd so dont want the bulk of RS3PRO..Is it workable?
Great video and contents. Because vertical video becomes more popular,on DJI website is possible purchase the vertical mount for the RS3. Can you make a tutorial and review about it please. If and how is working and see if is worth to buy. Thank you
Also thinking of the Rs3 my only concern is I wonder if it has enough clearance to still be able to tilt while attach a rode go 2 video mic transmitter.
Looking at the comparison chart on the DJI site, it mentions Steadicam. Have you seen this accessory? Steadicam themselves had a mount for the RS 1, but never brought one out for the RS 2. I rigged up something myself, but it would be great if DJI have made a proper fixture.
i have the moza aircross 2 great little think. Wonder how much more stable the rs3 is. But the self unlocking and locking feature seems so good because i often forgett to unlock when i stop filming and change location . When i have to take a take more to film. This would be so great. Just thinking what if the gimbal needs to be balanced in a way that you can nnot fold it completly. will it stop before and lock it on its own? that how it is on the rs3 pro but i want maybe the normal rs3. How is it there?
High performance while keeping it convenient. All comes down to which one suits your needs more. I’m definitely eyeing on the RS3 for now but who knows in the future I’m gonna need the RS3 Pro. Exciting time to be a filmmaker with these gimbals from the Ronin series.
I was wondering if the Sony A7IV can mirror the image on your phone will still displaying on the camera's display with the RavenEye technology. My current A7III with RS3 pro can't do that, it switches to the phone's display only and it loses all camera functions on the Ronin. If anybody knows if this will work, please let me know!
Hi Jason, just one question: Can you use the top handle of the sony fx6 with the new dji rs3 pro? It would be sometimes awesome not having to rely on external audio recording. Thanks a lot for a quick reply and for the great review!
@@JasonMorrisphotocinema Thank you so much for your quick reply and and the new video. To be able to use the Sony FX6 with the tophandle and eventually even with the receiver on top will be a huge upgrade for the sony fx6! Keep up the great work! Greetings from Switzerland
Hi@@OVERCASTTHEMOVIE would you happen to have some photos of your FX6 configuration with the audio handle. I'd like to buy the RS3 pro soon and would like some feedback on its use with the FX6. I can't seem to trigger recording from the Ronin, is that right? Thanks for your feedback!
Hi Jason, i'm using the ronin SC first gen, with my A7IV, maybe i will upgrade soon, because of some issue of stability with the ronin sc , and some weird move of the gimbal. so thanks for this video and you're advice. Nice Zipped jacket would like same as yours, even if i will not wearing like you.
You can if you can counter balance it. Maybe a larger BPU battery at the back. It would be a touch too front heavy. Or unless you attach the collar to the lens and base plate
OMG what is that handle that twists from under sling mode to the side? That's amazing! Just ordered the smaller RS3 one and want something like that for it. I've seen a few on amazon but they seem to mount to the left side :s
Curious why you "want to know" if we are upgrading. Is it more comments = higher RUclips algo recommendations? I know you personally don't care about what I have or if I am upgrading. Not trying to be an ass here, but curious how it helps you and the channel?
Great review! Looks like the RS3Pro got most things covered for me! It's not only a camera stabilizer but an all-in-one solution to most of my filmmaking needs.
@@JasonMorrisphotocinema Also I wanna thank you for enlightening me with crop lenses and A7IV. I'm probably buying A1 soon along with my A7SIII but would buy some low-profile APS-C zoom lenses to film outside the country and don't want to attract attention with a massive lens or gear and trying to look more like a tourist! You just happen to provide honest and great reviews about mostly all the gear I care about. Keep up the great work, mate!
![Which RONIN GIMBAL should you BUY?! [DJI RS3 Pro, RS3 & RSC2 Buying Guide]](http://i.ytimg.com/vi/_hlOVUF0gHo/mqdefault.jpg)
Rs3 and sony a7iv is compatible?
I been in the industry over a decade mostly working on the ground, brought DJI RSC3 PRO. I havent set it up yet, it been days, been busy. The point while I was doing research for a good gimbal, I need one that can go in and out with me as and when I need to hide the gimbal or push it to the extreme when weather is turning conditions. By all that standard, I ask around the shops in Singapore. (I base here) For this DJI Model that I felt was the best. DJI RONIN-M. That Gimbal to me was so stable to the point that I totally adore. Years later, the batteries dying, I check with shop in Singapore, they dont carry that, my mind was thinking, this is so good that no distributor want to bring in to sell? because it hardly spoilt is it? hahah. The gimbal stop production. Thus now watching this... I had a 20 mm sony and now thinking of the 24-70 that was recommended. on my Sony A7iv
is there a possibility to switch between video & photo mode using this gimbal?
Thanks🤝 Can you show your best setup Sony (A7IV) with rs3 pro
Sick video bruv! Production quality on another lvl!
Legend. Thanks my bro 🔥🔥🔥
The lidar… could you test with the RS2? Officially is not supported, but DJI also says the Lidar works independently from the gimbal… so is kinda dubious
Hey mate, came from Tingman and just wanted to say that your videos are awesome! Definitely staying for more!
Dude, awesome video again! It’s amazing to see your subscriber growth, you deserve it!
I like your videos, they are very usefull. I have the A7V, RS3 Pro and the Ninja V, but i can only start the video on the Gimbal withe the record button, when i press the record button again the video doesn`t stop. Do you have any idea why this is happening?
I would like when you make a video with all your config. The Sony is conected via USB to the Gimbal and without the Ninja V everthing is working fine.
please do a video to your settings. When do you use PF Mode and what you set your deadband and speed to. :)
I currently have a Sony A7iv and I’m trying to figure out if RS3 pro is compatible or should I just get the S3 regular
Hello. Suports Canon c200?
Do you recommend the RS3 over the Crane 2S for the A7 IV? I recently purchased the 2S on sale for $279 and I'm wondering if it's a better value than the RS 3 for $550.
That’s a tough one. Build quality, algorithm, auto unlocking, video transmission is much better on the DJI RS3. Whether it’s worth the price difference is all up to your budget
Would like to add the RS3 on top of my RS2 as well as the accessories all same ! The auto focus in RS3 seems better than last version as well
Thank you for your review brother.
I wonder can you use the rs pro 2 battery with the the 3 pro
I will try this!
@@JasonMorrisphotocinema cool , let me know! And keep making good content
How do you get it to fully lock up? I’m pretty pissed I bought the rs3 pro and it doesn’t even fully lock up. I reached out to DJI and they said It’s designed like that. In all the reviews I saw nobody said anything about the arm not folding up completely.
dji rs3 compatible with the a7iv...right ...not talking about the a7s iv or other
Will rs3 handle Sony a7iv + 70-200 2.8 or I need rs3 pro for this setup?
Please, DJI RS3 support Sony A7 IV?
Would i be ok with the rs3 using an a7iv w/cage mic and maybe and monitor or go with the pro?
the matte box which model jason?
Do you recommend upgrading from the RSC2 for A7IV? What are the differences between the RSC2 and RS3?
Hey Jason! Great videos, thanks so much for the down low. I'm still confused on one point though... the DJI website does not list the Fx6 as a compatible camera. Will the lidar and auto focus for manual lenses still work for Fx6?
Great video as always!
This question may be stupid, but is it possible to use the Sony A7s3 w/heavier lenses like the Sigma 24-70 on the RS3 Pro? I'm thinking about future proofing myself and buying the RS3 Pro. I currently have the RSC2 and it seems when I use my current camera and lens set up, I get error messages saying that the front payload is overloaded and/or that the gimbal can't auto tune when locked, even though it is clearly unlocked. This causes a constant auto tune timeout and is frustrating when I'm shooting weddings and have to opt not to even use it because of this.
Thanks for the great video. What clamb/mount are you using for your monitor? And how long is your hdmi cable 0.8 cm? Thanks
Can you do a video of a basic build of them (RS3/RS3 pro) both using the basic len kit?
Hey Jason, I wonder whether you can make a video about how to balance the fx6 on the dji rs3 Pro. I tried a few time to balance it according to the official dji video for teaching people how to balance their camera on their first time using the gimbal but it doesn't work on the fx6.
can you go undeslung mode with naked fx6 without the hassle? 🤓
Thank you Jason!
FX6 support.
Does the RS3Pro support FX6 (record) control on the gimbal?
HDMI cable recommendations for connecting to monitor while on gimbal?
Great review. Just ordered the rs3 pro and your video got me stoked to get after it!
Hi, if the sony a74 isn't supported with the ronin rs 3pro. How is it possible to use it? I am new to this so I want to be sure that I don't buy a lemon.
Hey, great Video thanks.
Just a Question, will I be able to use the Wireless Control with the A7III?
Hi jason! Thank you so much for this impressing Video. Do you think you could provide us with a video on how to properly Setup the Rs3pro with a fx6 in terms of balancing and where two mount monitors etc. ? Your setup looks so neat on your videos!. It is my first Gimbal ever and I do own a fx6 for 1.5 yrs now so I am still not that confident on how to balance etc. Thank you so much for your help!
Hi Jason. I have been using DJI gimbals, since the first baby one. I now have the RS 2 kitted out with side handles and second control handle. As well as the remote mounting kit. Love it, especially with my A7 IV (I first bought it to use with my RX10 but was wary of zooming that long lens). I have rigged my stripped down FX6 on the RS 2, but would like the extra capacity of the RS 3 Pro, so that I can add more to the camera, mics etc.
BTW Can I use the side handles and remote base from my RS 2 with the RS 3?
Just looked at the DJI site, and yes, the remote base and extra handles are compatible.
dl.djicdn.com/downloads/DJI_RS_3/DJI_RS_Series_Universal_Accessories_List_en.pdf
Hi! I have a question: the a7iii isn’t on the comparability list of these gimbals, but very similar cameras are. Will the a7iii work?
Love your videos that's what convinced me to get the sony a7iv. Please can you help to setting it up on streamlabs obs with a fe 24-105mm lens for streaming
How do you control REC in fx 6 camera?? Manual or transmiter control rs 3?
am just an enthusiast, not pro at all. I use an a7iii with Tamron lenses… plus, I rarely use manual focus lenses. With this in mind, I simply won’t need RS3 Pro.
However, I really really want the Transmission system and the active track. For this, I understand I can use the Transmission system along with RS3 and that should be enough. I will be losing out on LiDar support. I’m tempted by the carbon fiber body, and I may find the smaller handle slightly less comfortable.
But what else will I be losing if I go with the RS3 and not the RS3 Pro?
Aloha Jason! I just got my rs3, and I'm trying to connect it to my a7siii, so I can control the settings right from the gimbal. It doesn't seem to work, although DJI's website says the camera is compatible to do this. Do you have any insight? I've watched some videos on how to do it for the rs2, and thought it would be the same, but still no dice. Do you have any ideas? The rs3 only came with a USB-C to USB-C, do I need a different cable?
Would you mind sharing the millimeter distance from the LiDAR to the A7iV sensor? From the hot shoe
I just got this thing and I don’t have anything to measure it with and since you use the A7iv all the time I thought you might know off the top your head. Thanks in advance.
Awesome review for the ultimate form of professional handheld gimbal
I ordered the RS3 Pro. I haven’t had a gimbal and felt like it was time to get one. Strong enough for my Komodo and C70 and has the Tilta ecosystem to make it more functional. Excited to give it whirl
Great video. Do you have the atomos ninja v connected to the gimbal/ camera? I'm interested to find out the name of the part you you've used to attach the monitor to the dual grip. Would be great to hear from you. Thanks.
Do you know if the RS3 Pro has the sensitivity setting? My DJI Ronin S has follow speed, deadband, and sensitivity, but when I tried the RS2 it only had follow speed and deadband (I heard the SC2 has it, so I wondered if they brought it back)
I wish someone would do a direct comparison video of the Feiyutech Scorp and this DJI RS3. You made great reviews of both of these gimbals but a direct side by side comparing the two would be amazing
Currently working on this one
So the RS3 works with the Sony A7iv? On their website it doesn’t have it in the compatibility list.. but I want to purchase it for the auto lock so I hope it is conpatible.
Fx6 and v-batterie is ok ?
Hi Jason, great video, thanks! Q: How much lens weigh the RS3 can hold? I own a few Sigma Art lenses (35mm, 85mm, 14-24mm, 600 to 800 grs) and would like to know if it works with this lenses and my A7iv before buy one. Thanks in advance.
Does it fit the fx6 with the top handle easily?
... and without one single word about portrait mode shooting. Can you switch to portrait mode with one button press without dismounting the camera from a gimbal ? How stable is?
Been steady rockin the Ronin S for years until the rs3. None of them had enough features for me to feel like it was time to ditch ole faithful. But I do believe the time has come
I mainly use A7III with 24-70. Is there enough headroom if I put it on vertical on the RS3? Or should I go for the RS3 Pro?
mate this is the best review! Also just love how I know all the locations haha BRISBANE!!!
Just wondering if you have the same problem, I just unboxed mine this week and did a software update on the RS3,
I connected my A7iv via Bluetooth, but the record button doesn’t respond,
It says it’s connected but it won’t record with the Record button, I do all the steps right, first turn on the RS3 followed by my camera, 🧐
Great cinematography Jason, the camera work and colour grading is on point! I live in Brisbane and seeing some of those shots of familiar locations has inspired me to do better. Istarted following you when I got my A7IV and was loooking for some things. I'm a hobbyist but working up slowly to try and pruduce content like yours. Also r u ripped coz of all the gear you lift everyday ahah
Hi Jason how would you rate the the scorp pro series from feiyutech to the Ronin RS3 series. Very hard to make a decision without testing both so your advice would be much appreciated
Both are top class! Having the Lidar system from the 4D sure upgrades the gimbal performance a whole lot
What use case would the LiDAR be good for?
Hi there - thanks for your videos - they're great. I'm confused as to why DJI don't recommend the A7iv for the RS3.... so it does work fine?? And is the RS3 ok for the A7iv with the 24-70GM2 lens? Slightly burnt as the Manfrotto MVG220 was too small for them together! Rather not fork out for the RS3 Pro unless I have to..
I'm using rs3 with my Sony a7m4 with sigma 24-70 2.8f - works perfectly
Quick question, let's say you can get a RS 2 Pro Combo brand new for almost the same price as the RS 3, what would you choose?
RS2 pro
What’s the link to to those side handles on the rs3 pro? Those are dope 🔥
Which side handle is it?
Hi Jason I have a FX6 and a FX3 ..Can Rs3 handle FX6 (without the top handle and grip)..? I dont need the focusing motor or the transmitter facility snd so dont want the bulk of RS3PRO..Is it workable?
Great video and contents. Because vertical video becomes more popular,on DJI website is possible purchase the vertical mount for the RS3. Can you make a tutorial and review about it please. If and how is working and see if is worth to buy. Thank you
Just bought a Sony a7iv. Buying a DJI Ronin RS3 for it
Hey I am here from tingman the ad was soo nice bro
Your reviews are the best. Very clear concise and to the point! Will get the rs3 for my a7iv
Certainly is a great choice my friend
Also thinking of the Rs3 my only concern is I wonder if it has enough clearance to still be able to tilt while attach a rode go 2 video mic transmitter.
Looking at the comparison chart on the DJI site, it mentions Steadicam. Have you seen this accessory? Steadicam themselves had a mount for the RS 1, but never brought one out for the RS 2. I rigged up something myself, but it would be great if DJI have made a proper fixture.
There is a hoot of a steadicam setup on the DJI web site, but I can’t see where to buy as an accessory.
HOOT?!!! Shot . . .
Where did you get that monitor mount??
Love your videos :) Keep it up!
Can this gimbal shoot and balance in portrait/vertical mode?
Thank you for still watching my stuff! Yes it can. Forgot to show this. It has portrait mode also
i have the moza aircross 2 great little think. Wonder how much more stable the rs3 is. But the self unlocking and locking feature seems so good because i often forgett to unlock when i stop filming and change location . When i have to take a take more to film. This would be so great. Just thinking what if the gimbal needs to be balanced in a way that you can nnot fold it completly. will it stop before and lock it on its own? that how it is on the rs3 pro but i want maybe the normal rs3. How is it there?
Anyy way to mount FX6 side handle to the gimbal? Need that to control the cam settings
Can it be used on a Sony A7R4? with the R
if you check the website you can see bluetooth compatibility
High performance while keeping it convenient. All comes down to which one suits your needs more. I’m definitely eyeing on the RS3 for now but who knows in the future I’m gonna need the RS3 Pro. Exciting time to be a filmmaker with these gimbals from the Ronin series.
Certainly exciting times! Both incredible tools
I was wondering if the Sony A7IV can mirror the image on your phone will still displaying on the camera's display with the RavenEye technology. My current A7III with RS3 pro can't do that, it switches to the phone's display only and it loses all camera functions on the Ronin. If anybody knows if this will work, please let me know!
How do you think this compares to the feiyutech scorp gimbals?
They do seem above their level but so is the price. Scorp gimbals are great for their price but not close to the DJI quality
Hi Jason, just one question: Can you use the top handle of the sony fx6 with the new dji rs3 pro? It would be sometimes awesome not having to rely on external audio recording. Thanks a lot for a quick reply and for the great review!
Yes you can. I am releasing a quick IG video tomorrow about this to show it can be done
@@JasonMorrisphotocinema Thank you so much for your quick reply and and the new video. To be able to use the Sony FX6 with the tophandle and eventually even with the receiver on top will be a huge upgrade for the sony fx6! Keep up the great work! Greetings from Switzerland
Hi@@OVERCASTTHEMOVIE would you happen to have some photos of your FX6 configuration with the audio handle. I'd like to buy the RS3 pro soon and would like some feedback on its use with the FX6. I can't seem to trigger recording from the Ronin, is that right?
Thanks for your feedback!
How does rs3 pro compares to scorp pro?
Hi Jason, i'm using the ronin SC first gen, with my A7IV, maybe i will upgrade soon, because of some issue of stability with the ronin sc , and some weird move of the gimbal. so thanks for this video and you're advice. Nice Zipped jacket would like same as yours, even if i will not wearing like you.
The new algorithm is incredible and the best I’ve seen
I mean technically can’t the non pro RS work on FX6 with just monitor and a light lens ?
correct. It is slightly short on the arm length
Got the RS2 when released. Just order the RS3 Pro yesterday
Brilliant gimbal. You will love it coming from the RS2
DJI refresh still up for grabs?!?!?! 😂
Yeah man. You Aussie? I’ll add you to the pool for the draw
@@JasonMorrisphotocinema sis it for locals only? I’m in Ohio, United States
I want to use rs3 pro with A7IV but powerzoom cable isn’t working how do I make it work??? Please someone help
Did you get a chance to see if you can mount the fx6 on the rs3 pro with the top handle attached?
Yes you can actually. I will do a quick Instagram video to show people
I still stay at my crane 3s for my FX6 Jason 😉 but definitely a good choice
Still to this day the crane 3s is great for the FX6 filly kitted out
If only the focus motor was the industry standart 15mm instead of 12mm
Is the RS3 Pro overkill for the Sony A7S III?
Yeah a little. Unless you need the extra power
My biggest hope is if the RS3 Pro can balance a Sony FX6 with the new 70-200 F/2.8 GM Mark 2 🤞🏻
You can if you can counter balance it. Maybe a larger BPU battery at the back. It would be a touch too front heavy. Or unless you attach the collar to the lens and base plate
OMG what is that handle that twists from under sling mode to the side? That's amazing! Just ordered the smaller RS3 one and want something like that for it. I've seen a few on amazon but they seem to mount to the left side :s
Its an official DJI accessory you can buy it off their website
@@dirtcreature3d haha thanks. I don't know how I missed that 🤣
Thanks dirt creature
thanks soo good
Thanks
Dude! This review was 🔥🔥🔥🔥🔥
Legend!! Thanks for tuning in 🔥🔥🔥
Curious why you "want to know" if we are upgrading. Is it more comments = higher RUclips algo recommendations? I know you personally don't care about what I have or if I am upgrading. Not trying to be an ass here, but curious how it helps you and the channel?
the RS3 can handle a7iv + 24-70 + cage + mattebox?
Easy. It does
Great review! Looks like the RS3Pro got most things covered for me! It's not only a camera stabilizer but an all-in-one solution to most of my filmmaking needs.
I wonder if the RS3 pro can hold Canon 90D with Sigma 50-100mm f1.8 art lens, it's a pretty heavy combo, anyone know? Thanks
Love ur content. Hallo from Dili East Timor
Thank you for watching from East Timor
Hey Buddy awesome gimble!
Thanks Steve
DJI just can't stop impressing us with how frequent they come up with upgrades and new stuff!
They are just gods
@@JasonMorrisphotocinema Also I wanna thank you for enlightening me with crop lenses and A7IV. I'm probably buying A1 soon along with my A7SIII but would buy some low-profile APS-C zoom lenses to film outside the country and don't want to attract attention with a massive lens or gear and trying to look more like a tourist! You just happen to provide honest and great reviews about mostly all the gear I care about. Keep up the great work, mate!
i was about trying to spend money on RSC2 since it's quite cheap
now i'm interesting to RS3
Certainly is a very good upgrade
JM always coming in with the best reviews
Thank you my friend
Hi guys! does anyone know if the RS3 (not pro version) can balance the Sony a7iv with a smallrig cage?