Everything about Fascia Board ...the video you want to watch !
HTML-код
- Опубликовано: 29 сен 2024
- I tried to make a complete video about fascia board and I think I tried my best on this video.
Hope you like it !!
Enjoy the video and don't forget to subscribe!
thanks for watching !!
Excellent video! All the tips from beginning to end were very helpful. Step-by-step with no assumptions is the way I like it explained. Thanks for sharing.
Thank you for your videos. I've learned a lot. I just started roofing and I love it
Thanks Bryan!
Que onda erick sigue hechandole ganas queria respoderle al bruto que dice q un profesionla una miter saw se ve que no sabe ni M... de carpinteria he sido carpintero por 20 anos y jamas use ni he visto q usen saw q dice si eres carpintero y estas arriba de la pared de un piso o dos tienes q cortar las colas y poner la fascia y el 1X si es que lo lleva y solo ocupas un skill saw como q estas usando miter saw jajajajaa viendo tus videos me avente el roof de mi casa puse shingles y pues ahi quedo almenos no tengo goteras jajaja gracias Erick
orale que bueno ke te kedo al 100nazo pariente...saludos!!
Nice can you do a how to video patching using bondo
Hola muy bien gracias señor y por arriba no clava nada o tornillos
Erick can u make a video on how to cut torch when torching
ok I Will
@@Garciasroofing can u also do one for tile, on how to start putting tile what measurmemts to do thank you
That “ 45 degree angle” cut is call 45 degree bevel homie. Not being a prick but an angle would be the cut of the fascia board at the rake. In the south with exposed fascia we have to use exterior screws. If not the hand drive nails will back out. Good job though 👍🏻
Thanks for the up date!
Tough crowd Eric . Never mind these tools you’re still the best .
Lol...its ok bro... I don't mind ...just showing what to do if you don't have the right tools when you need them...but sometimes people don't get the main idea behind the video.
Thanks bro!
Eric Garcia
Damnnn video upsidedown?smh
Trabajas por tu quenta
Really 8 minutes to show how to change a blade on a circular saw ?--Everyone,always prime the raw wood on the corners and on all sides of the facia boards or it will rot out in a year or two
Great. Watched this few times. A question for you. And maybe a video idea 😊. A section of my house has no rafter tails sticking out but does have the facia. Seems like they were nailed from top of roof. How do you replace these without messing up with the roof? Thanks!
Finally found a video that addresses my situation. My question is, how do you remove the existing rotted facia board from the rafter tails, starter board and flashing with damaging either of them? Thank you.
Wiggle back and forth. If it's got a bunch of nails in the fascia coming from the metal drip edge, you gotta get a pry bar and get under the fascia (hopefully you got no soffit). If you've got soffit, remove 2 boards the length of the fascia you're replacing so you have adequate space to work.
Thanks you I was just quoted 12,000 dollars to put fascia on a small 1100 square foot house am going to learn how to do it my self and am 64 years old! ...... gonna do this myself 👍👍
Damn just for fascia? That’s crazy! Where I live you can get a complete new shingle roof for that kind of money
They trying to scam you thats crazy. My roof for 1200 sqft was 5,000
Dude..I'm 9 minutes into this video and haven't seen shit about facia boards!!!!
I still have my 30 year old HD-77. Have a diamond blade on it to cut roof tile . Good idea to change the oil in the beast once in a while.
House painting , rotting fascia and roofing all go hand in hand. Good video ..
best fascia job video I've seen on utube
What size of wood do you use for the fascia ?
How do you measure the length sizes of how much fascia you need to replace? And what about the plank boards on deck?
you always add a couple of extra fascia for the waste , and the planks you remove and always add a couple of more planks.
Una pregunta en todas la eskinas 45 i donde no es eskina ke corte seria
Good job! Not the most refined video,but it is informative!!
What happened to the drip edge?
Is that plywood above the fascia rotted? I have always had a hard time getting fascia out when there is metal drip edge...the nails under the drip edge are hard to get out without bending the drip edge.
What's the secret so you're getting the nails out of the drip edge coming out.
True! Gotta straighten it back out. It's really hard to avoid bending the drip edge, just try to be careful not to knock nails back up through the roof, they have to be cut with a sawzall or one handed recip saw, but be careful not to cut your roof.
Edit: his nailclipper actually looks better and easier to use for cutting the nails.
Crescent wrench , heato
On the job training
Lmao! 😂
wheres the vid where you show how to cut the horizontal angle for the plywood?
Eric, would you nail from the sheathing into the fascia? I see some that say to do this to hold down sheathing better in strong winds etc.
10 minutes of 22 talking about the saw. If someone doesn't know how to use a saw or what blade to use, they should be hiring a contractor or handyman.
lol true true but i like this guy in most videos
Every single contractor and handyman also had to learn the fine details. No amount of experience prevents anyone from learning new things so extra details are fine. You can always skip through a video, but if certain information is left out how can an inexperienced person find it? Inexperience does not mean incapable it simply means a lack of knowledge.
yeah you can always hire someone to do it if you don't want to learn, and you can always want to learn by trial and error. Sometimes you just have to learn on your own by watching how it's done and how it should not be done. But the only way to learn for yourself is to try to learn and do it yourself. That guy working with him is someone who is learning, I don't see anything wrong with someone wanting to learn. You must be the kind of person who likes to shit on people who don't know how to do something even when they are in the process of learning. Just cause your someone who already knows how to do it, doesn't make you a better person, in fact shitting on someone who is just learning just makes you an "asshole" about it. And that's it. Nobody likes an asshole cause an asshole is always full of shit. Even when that shit the asshole is saying is right, he still, we'll just an asshole.
Appreciated brother along good points , the only point will the be galvanized nails maybe 2 inches and half.
Finally found a facia video with miter cuts. Nice job! Looks great!
it's called a socket, ratchet and adjustable wrench known as a crescent wrench for it's brand
Hay. My brother says. He seed only. 2 story have 2x6 fasha board not sengails. Story. Please let me now. Code please
do the fascia boards need to be below the rafters a lil bit or no?? what kind did u get??
But I love this guy I've never commented so much
Awesome work brotha keep putting out videos God bless.
Gracias por el video Eric!!
Gracias maestro saludos desde florida
Cool job thank for the tips
Hey Eric,
Love your videos. Maybe you made one already but when you come across a job where you transition a shingle roof to a flat roof torch down can you make a video on that. Thanks and keep up the awesome work.
Looks good. Excellent.
Thank you
🤗
Erick... How can I contact you?
for fascia what kind of wood can i use regular 2×6 pine
Use spruce please
Good job brotha.
Love you vidios. All
Nice work
Thanks
pregunta, cada cuantas lineas se claban los tiles?
Todas se clavan. No mames
What wood do you use?
Spruce
Not trying to sound racist but your accent alone makes me very comfortable that you know what you are talking about
La neta you remind me of my boss all kinds keep up the awesome work
What do u mean u people...lol. Jk
Nauseating.
Look up Larry Haun and learn how to use a hammer.👍
Bro i was teaching my helper on this video ...he doesn't know s...t yet he made it! And nailed it!
This poor guy's helper is about as useful as a hammer trying to remove a saw blade
Real professionals do fascia board with a miter saw this is Mickey Mouse 🐭
lol
Really? Maybe you've never seen a real carpenter doing fascia ..
@@Garciasroofing Hey Eric, I think you're taking it the wrong way. I believe he was being sarcastic and not actually meant it hence the mickey mouse comment.
@AA YOU GET IT😂😂😂😂
As they say, there's more than one way to skin a cat. If it's done correctly and looks good then job well done
Where did you bought the fascia boards? send me the link please!!
They used a local place
Wrong nails there guy
Are located in California?
Eric are you in the LA area? How can I contact you?
Hey Eric, I really enjoy these videos but man, I would really appreciate it if you made more videos that are a lot shorter and more to the point. But I do enjoy what you do