How to Replace Serpentine Belt Tensioner 2008-2013 Nissan Rogue
HTML-код
- Опубликовано: 4 окт 2024
- Buy Now!
New Accessory Drive Belt Tensioner from 1AAuto.com 1aau.to/ib/1AEB...
This video shows you how to install a new belt tensioner in your 2008-2013 Nissan Rogue. A weakened or seized belt tensioner can lead to worn, damaged, or even broken belts. It is important to replace the tensioner as part of a semi-annual service to avoid problems and damage.
This process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obge/1A...
• 14mm Wrench 1aau.to/oTB/1AX...
• 13mm Socket 1aau.to/obnG/1A...
• 14mm Socket 1aau.to/obnG/1A...
• 16mm Socket 1aau.to/obnG/1A...
• 21mm Socket 1aau.to/oadb/1A...
• Trim Tool Set 1aau.to/o7K/1AX...
• 1/2 Inch Impact Gun 1aau.to/ory/1AX...
• T20 Socket
• Ratchet 1aau.to/obvR/1A...
• Socket Driver
• Socket Extensions 1aau.to/obnG/1A...
• Swivel
• Torque Wrench 1aau.to/oazG/1A...
• Block of Wood
• Gloves 1aau.to/oV4/1AX...
• Safety Glasses 1aau.to/oPe/1AX...
• Floor Jack 1aau.to/oZj/1AX...
• Hammer 1aau.to/oRZ/1AX...
• Jack Stands 1aau.to/oQQ/1AX...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто/Мото
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Fantastic! Our belt came off, & I thought I'd just have to put it back on (which worried me, since why did it come off in the 1st place?). Once I opened up the wheel well, my belt tension pulley was sitting loose in there, with a sheared mounting bolt which led to a broken mount. Suddenly a much bigger job, but with the help of this video, got it all done. I never would have known/thought to lower the engine from it's mount for better access, so you probably saved me $250-300 by helping me do the job myself. Thx!
Finally I've found a video that shows how to remove the damn idler pulley! Even the service manual is not much help. Thanks for the tip of lowering the engine to access the idler pulley bolt. I would love to see more details and tips on changing idler pulley and what to take in consideration as some OEM idler pulleys have different internal shapes even though the belt grooves and diameters are the same.
Probably should’ve gone ahead and replaced the belt while you’re already there replacing the tensioner. For anyone looking to actually do this.
Did you replace the idler pulley with a used part?!
Very impressive video
LOWERING THE ENGINE MADE A HUGE DIFFERENCE. Thanks so much for the info my tension pulley malfunction and I couldn't afford to tow it to mechanic, I had the tools and this guide made it easy.
Had a stray cat under the hood i didn't know about jumped from the moving car heard the cat squeal dislodge my serpentine belt your video help me get on and running
Is this the same process with 2016 Nissan Rogue.
Me gusta tu forma de esplicasion
Thanks for the help
Thank you very much.
Thanks , and blessing .
I thought this was like an Altima...this has an extra pulley..I went at my tensioner straight from top..
How come belt tensioners cause rear tires grinding sounds at low speeds. I was keep replacing wheel sensors speed sensors tcm etcm finally we cahnged this all things goes away
So you mean to tell me there's not one video on the internet to take a 2012 Nissan cube base 1.7 l serpentine belt tensioner out
removing the motor mount was completely unnecessary. the bolt was accessible using an extension
Quisiera que me mostraras como quitar soporte de trasmicion Nissan rogué 2009 2.5
You don't have any videos for bravo 2 t jet?
+Walid Shibani We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ
ya que habia desarmado por lo menos le hubiera dado una limpiada ya que se ve que esa camioneta estaba abandonada o se les inundo
Rusty 😮 poor thing