I just destroyed my USB micro board trying to solder on the USB C breakout board. Mangled it completely. I wish I'd found yours first. Just ordered two :)
Small tip for anyone who has issues which you've pointed out with the ribbon. If the gold tabs are starting to come off the ribbon you can cut the ribbon back a little bit with scissors, keeping the stiff part of the ribbon of course. I've had to do it on 2 of my controllers because I can't help but keep taking them apart.
If you make a JDS-011 board, I will probably order yours for my next two controller upgrades. All three of my PS4 controllers have JDS-011 boards. I used a USB-C board from a different designer/seller which works, but they didn't get the hole placement correct on their PCB and I had to snip and file down the two plastic pins that would have gone through the lower holes. You have great attention to detail and your boards look gorgeous. Hope to see the JDS-011s on your site someday!
I have located controllers of versions with all different usb-boards. So i can finally make both the jds001 and jds011 from my out circuit board. Probably within a month!
Finally that somebody made this beautiful product I wasted I think that I wasted atleast 300 euros worth of micro usb cables over they period of owning exactly that controller in the video lmao
Hey Maris, I've wanted to buy some of the boards from your store, but had to find that your store is paused. Would you be able to give me a rough estimate on how long I have to wait for it to open back up? I'd love to fit all my controllers with USB-C finally. Max :D
Just finished the conversion to USB-C. Bought two JDS-5X, one in reserve if I happen to buy one more controller. Works great, and your tutorial made the job easy-peasy! Thanks!
Wow! This video is amazing! The production quality is very high. The structure and explanations are very clear and understandable. For my next controller I will probably buy a new board from you and follow this tutorial. Thank you so much for the amazing work and keep on going! Btw, you should totally get partnered for RUclips memberships. You have one membership guaranteed already haha
@@MariusHeier1 Since obviously you are far smarter than I when it comes to modding controllers... would this same thing (Micro-USB to USB-C) be possible to convert on Xbox One/Xbox One S and X Micro-USB controllers?
@@phlooke I dont think the xbox controllers has a separate usb circuit board as the ps4 controller? So its most likely not possible to make a custom solution like this
Hi I’m from Canada, I am planning to do this upgrade on my Dualshock 4 too and I went into your website but the JDS-055 is out of stock. When will it go back in-stock? I really need to do this upgrade as soon as I can because the charging port on my Controller broke. I see that the JDS-050 is in-stock though, but will it work on my Controller? Mine came with a JDS-055 board
For years I've been sick and tired of my Dualshock 4's micro USB port being so damn loose. I've tried replacing the port multiple times, I've tried replacing the controller outright, I've even bought a 3D printed little attachment that's supposed to keep it in place, and it always failed eventually. I was thinking of getting a Dualsense and take my chances with potential drifting, but at long last, I have the permanent solution for the controller I already have. Thank you so much.
Yeah its totally awesome. I personally appreciate it each time i plug in the cable. Haha. Im a big fan of the dualshock, fits my hands better than Dualsense. Take care and thanks for the kind words. :)
@@MariusHeier1 Hey, mine finally came in and I got it in my DS4 (had to file way more than I thought I did) but now for some reason my PC doesn't recognize it. Does this board use special drivers or something I'd need to get? If it matters, I got the JDS-040 and I run Windows 10.
I tried replacing the socket itself and found it to be too much hassle so very happy you have these available now. Very excited to fit one of these in my scuf impact!
Did you manage the conversion? I have a scuf infinity (with extremerate Clicky Kit without L2, R2) that I would like to rebuild. will the joysticks also be available for purchase in the foreseeable future? Good that they have already developed this. I would still be interested in the latency of the new sticks compared to the original ones.
@ludgerk.1683 Yep! Ive converted both my scuf infinity 4ps and my scuf impact to usb-c. These boards by Marius are incredibly well designed and extremely high quality. Better than sonys boards by far. Just make sure you choose the correct board to match the controller main board. And follow the instructions carefully!
Thank you so much! There isn’t really any detailed explanation on the carving plastic part available anywhere. Now I can complete my project with confidence. I may get another controller just to do this again.
I ordered 2 jds-055 usb c chargers for my controller and they don't work. They light up but will not charge can you please help me with this. I ordered the correct ones for my controller revision and have no idea what to do now
@@MariusHeier1 I guess that works too. Your connector gave me a huge scare when after completing the mod, I plugged it in, there was no light and my NVMe drive interface with the OS kernel failed.
@@MariusHeier1 Yea, I changed a cable and it was fine. The cable was one meant for a external SATA USB3 drive, I am guessing some kind of chipset limitation or just some random AMD issue.
@@MariusHeier1 One issue I found out while doing is that your board has 2 "wings" while some boards like mine JDS-040 has it only on one side, as a result on the controller shell itself, the parameter around where you are filling to make space for the USB-C connector, one side is higher than another. So you need to file it down too.
If I have a generic ps4 controller how would I know the exact version for mine HRC 4420 board? which has the next thin B-C17019-171012-VI.0, in another place it has D2 and J7.
just did this on a stock ds4 controller. For practice before i work on my Battle Beaver. I love it!! I will order another so i can make all my DS4 controllers USB C
Thanks for this tutorial! I haven't even had my controller for a year, but I can tell the micro-USB port is already showing signs of wear since it can intermittently cut out. Fortunately I have one of the JDS-05x boards so you can bet I'll be ordering one.
As soon as your next stock comes in I'll take 2 please!. I just had my PS4 controller fail last night, and I was trying to figure out if I could swap it out for a USB-C port instead, because I have always loathed the stupid micro USB ports!, they are garbage!. I was going to get a PCB made and solder and build one myself, but then I found this in my searches, PRAYERS ANSWERED!. This saves me a lot of work, it's a no brainer!. Can't wait to order and get playing again!. I may be 44 but I love my games! and I just bought God of war Ragnarok and it's on the way in the mail, and I won't be able to play it until I get this inferior controller port fixed!. I can't wait till there is more in stock!. I am SOLD SOLD SOLD on this product!. You beat me to the idea! Well done sir!. Everything should be USB-C in my opinion. Keep up the good work!, and sending good vibes from BC Canada! - Adam
@@MariusHeier1 Ha ha right on!. Actually I noticed you are in Norway!. Fun fact, I am actually a descendant of Vikings, apparently my uncle said our family is related to the Lothbroks (Ragnar etc.), and Thorfinn (the skullspiltter) Einarsonn!, and the royal families of Europe!. It's nice to meet a fellow Viking! lol. My father was actually born in Sweden. But yeah, how dare you beat me to the idea of USB-C on PS4 controllers and making my job of replacing my stoopid micro USB port soo much easier for me!. lol!. The moment you have them in stock I'm definitely grabbing a couple!. Have a great day my friend!.
@@MariusHeier1 Hello again Marius, I was just wondering if you've already sold out of the USB-C boards for PS4 controllers yet?. I haven't received an e-mail saying they are back in stock, just wondering an ETA to be able to buy 2 of them. Thanks. :) - Adam
So I completed the installation of the 011. Looks great. Plug it in, the controller lights up! Only thing is when I took the controller apart weeks ago to see what board version I had after putting it back it it doesn't hold charge. I hoped swapping for usb c would fix it but I've got the same issue. Don't know whether to keep digging and throwing more money at it or to just buy another controller and maybe different board version if i have to. It worth changing the battery? Annoying... It works plugged in but the ps4 button doesn't respond even then. Think that might be the issue.
@@MariusHeier1 just edited my comment so not sure if you saw. The ps button doesn't respond when plugged in when the rest of the controller works fine. Would that cause this issue? Just put the controller back together think that might be it for tonight 🥲 thanks its a really great product especially for the price. If I have to get another controller and another board I won't think twice.
@@MariusHeier1 not sure you care but it was the conductive film stopping the ps button from working. Replaced it for £7 now I have a usb rechargeable dualshock 4. Thank you sir!
Damn, the controller that was included w. my fat ps4 is a 011💩 I've at least got a 030 that I apply this mod to. Is it in your plans to include the 011 at a later date as well? Edit: I'm sitting and looking at your tindie page and I just wanted to double check so I haven't missunderstood anything. Am I correct in having interpreted the description as in that the jds-5x gold look board will work with the 030?
@@MariusHeier1 I just received the jds-5x board and I've encountered an issue. I followed your guide and prepared the shell, inserted and plugged in the new board as shown in the video but it wont connect, light up or charge. I tried using the old board to determine which part is acting up and the controller connects fine through that one. I've noticed two things that accompanied this behavior, - It gets hot to the touch, - pin 5 and 6 from the right to the left looks to be bridged. Would using a scalpel or something else with a tiny edge to sever the tin in between the two pins help or is it fried? Edit: It also disconnects the controller whenever I plug in the usb c board to a power source whereas the original board works fine.
@@phooopy7941 Can you drop me an email at supermariusheier@gmail.com ? I need to check what batch this came from. Can you add some close up mobile pics as well? Ill send you a new board asap.
@@MariusHeier1 Will do. I did remove what I thought was bridged solder though, using a wooden toothpick, so it seems that they weren't soldered together. I will send my receipt / order confirmation along with some pictures in a bit though👍
Either open and look inside. Or if your controller has a sticker on the back. Check the number under where it says made in china. Post it here and i can check what jds belongs to that number.
my ribbon cable works with the micro usb but not your board. i currently have it plugged in without it being mounted and theres no light or anything and inputs arent working. not sure if i did something wrong during installation ir what
Hi bro i have a question, does this board work on extremerate decade tournament controller(DTC)?, it is a shell for the ps4 controller. If so i can really make a pro controller with USB-c just perfect.
@@MariusHeier1 i have not buy the all pack yet but for the picture of the shell online i think your 5x board might be the one. Only need to enlarge the hole a bit. Thanks for the help 👍 . Its gonna be one hell of a masterpiece 😎
@@MariusHeier1 I emailed you the info back in Sat, Feb 24 and I also replied to your message in the website. How many more times do I have to contact you?
![OsamaSon - ik what you did last summer [Official Music Video]](http://i.ytimg.com/vi/4DIQDnu3mr4/mqdefault.jpg)
![FendiDa Rappa - Clock Dat ft. Shamar Marco [Official Music Video]](http://i.ytimg.com/vi/3NBU8KHdxYY/mqdefault.jpg)
I just destroyed my USB micro board trying to solder on the USB C breakout board. Mangled it completely. I wish I'd found yours first. Just ordered two :)
Awesome! Yeah soldering stuff is pretty hard. Thats one of the biggest reason i made the board.
Small tip for anyone who has issues which you've pointed out with the ribbon. If the gold tabs are starting to come off the ribbon you can cut the ribbon back a little bit with scissors, keeping the stiff part of the ribbon of course. I've had to do it on 2 of my controllers because I can't help but keep taking them apart.
Это да. Но только не сильно коротко, так как она может не достать до контактов и не вставиться до конца.
shipping was super fast! received my order quicker than i get some domestic packages. now gotta find time tackle this upgrade. cheers mate! 👍🏼
Awesome :)
If you make a JDS-011 board, I will probably order yours for my next two controller upgrades. All three of my PS4 controllers have JDS-011 boards.
I used a USB-C board from a different designer/seller which works, but they didn't get the hole placement correct on their PCB and I had to snip and file down the two plastic pins that would have gone through the lower holes.
You have great attention to detail and your boards look gorgeous. Hope to see the JDS-011s on your site someday!
I have located controllers of versions with all different usb-boards. So i can finally make both the jds001 and jds011 from my out circuit board. Probably within a month!
@@MariusHeier1 will definitely second that. great job.
thank u for part and guide brother
Finally that somebody made this beautiful product I wasted I think that I wasted atleast 300 euros worth of micro usb cables over they period of owning exactly that controller in the video lmao
Haha. Same here. I had 5 or 6 controllers. Thanks for the kind words :)
Hey Maris, I've wanted to buy some of the boards from your store, but had to find that your store is paused. Would you be able to give me a rough estimate on how long I have to wait for it to open back up? I'd love to fit all my controllers with USB-C finally.
Max :D
Just finished the conversion to USB-C. Bought two JDS-5X, one in reserve if I happen to buy one more controller. Works great, and your tutorial made the job easy-peasy! Thanks!
Awesome stuff 😎
Type-C on a DualShock-4...Sexy!
Anxiously waiting for drift-proof Hall-Effect sensors for Ps5 DualSense.
Wow! This video is amazing! The production quality is very high. The structure and explanations are very clear and understandable. For my next controller I will probably buy a new board from you and follow this tutorial. Thank you so much for the amazing work and keep on going!
Btw, you should totally get partnered for RUclips memberships. You have one membership guaranteed already haha
Haha thanks for the kind feedback. I will def look into this :)
@@MariusHeier1 Since obviously you are far smarter than I when it comes to modding controllers... would this same thing (Micro-USB to USB-C) be possible to convert on Xbox One/Xbox One S and X Micro-USB controllers?
@@phlooke I dont think the xbox controllers has a separate usb circuit board as the ps4 controller? So its most likely not possible to make a custom solution like this
Hi I’m from Canada, I am planning to do this upgrade on my Dualshock 4 too and I went into your website but the JDS-055 is out of stock. When will it go back in-stock? I really need to do this upgrade as soon as I can because the charging port on my Controller broke.
I see that the JDS-050 is in-stock though, but will it work on my Controller? Mine came with a JDS-055 board
For years I've been sick and tired of my Dualshock 4's micro USB port being so damn loose. I've tried replacing the port multiple times, I've tried replacing the controller outright, I've even bought a 3D printed little attachment that's supposed to keep it in place, and it always failed eventually. I was thinking of getting a Dualsense and take my chances with potential drifting, but at long last, I have the permanent solution for the controller I already have. Thank you so much.
Yeah its totally awesome. I personally appreciate it each time i plug in the cable. Haha. Im a big fan of the dualshock, fits my hands better than Dualsense. Take care and thanks for the kind words. :)
@@MariusHeier1 Hey, mine finally came in and I got it in my DS4 (had to file way more than I thought I did) but now for some reason my PC doesn't recognize it. Does this board use special drivers or something I'd need to get? If it matters, I got the JDS-040 and I run Windows 10.
Looking at connected devices on Windows, the specific error it shows is "Device Descriptor Request Failed."
Never mind, it's working again! I think I just made a mistake plugging in the ribbon cable.
I tried replacing the socket itself and found it to be too much hassle so very happy you have these available now. Very excited to fit one of these in my scuf impact!
Thats gonna be so cool. Never seen a Scuf with one so far. :)
Did you manage the conversion?
I have a scuf infinity (with extremerate Clicky Kit without L2, R2) that I would like to rebuild.
will the joysticks also be available for purchase in the foreseeable future?
Good that they have already developed this.
I would still be interested in the latency of the new sticks compared to the original ones.
@ludgerk.1683 Yep! Ive converted both my scuf infinity 4ps and my scuf impact to usb-c. These boards by Marius are incredibly well designed and extremely high quality. Better than sonys boards by far. Just make sure you choose the correct board to match the controller main board. And follow the instructions carefully!
@@Neoklis128
many thanks for the quick response.
Thank you so much! There isn’t really any detailed explanation on the carving plastic part available anywhere. Now I can complete my project with confidence. I may get another controller just to do this again.
Yeah. This is the best method i came to use over time. When i get a bit more time i will make a special device to drill it out, or carve it out.
@@MariusHeier1 i can imagine a usbc shaped cutter, that would be sick
Bought 2 and just finished setting them up follow the vid and they work amazing thx bro keep doing the lords work because they won't 🤘🏻
I ordered 2 jds-055 usb c chargers for my controller and they don't work. They light up but will not charge can you please help me with this. I ordered the correct ones for my controller revision and have no idea what to do now
god bless you for selling these
you saved many controllers from landfill
Wow the production quality!!
I am doing this mod (micro-usb port failing) while watching your video right now. Though I wonder if we can 3D print the botton shell instead :P
Yeah. I tried modelling it, and its really hard to get it accurate. Its probably easier to print both top shells at once.
@@MariusHeier1 I guess that works too. Your connector gave me a huge scare when after completing the mod, I plugged it in, there was no light and my NVMe drive interface with the OS kernel failed.
@@jierenzheng7670 Did you get it working? Did you get the cables on right?
@@MariusHeier1 Yea, I changed a cable and it was fine. The cable was one meant for a external SATA USB3 drive, I am guessing some kind of chipset limitation or just some random AMD issue.
@@MariusHeier1 One issue I found out while doing is that your board has 2 "wings" while some boards like mine JDS-040 has it only on one side, as a result on the controller shell itself, the parameter around where you are filling to make space for the USB-C connector, one side is higher than another. So you need to file it down too.
How to buy it in Russia tho?
Check the Lectronz shop. Should have the as an option. Let me know otherwise
У него есть ссылки- если покупаете в Европе и не в Европе. Россия есть в европейской ссылке.
Hello how to know What pcb is compatible with my controller?
If I have a generic ps4 controller how would I know the exact version for mine HRC 4420 board? which has the next thin B-C17019-171012-VI.0, in another place it has D2 and J7.
Hmmm. Sure it's an original controller? What does it say under the original usb micro circuit board?
just did this on a stock ds4 controller. For practice before i work on my Battle Beaver. I love it!! I will order another so i can make all my DS4 controllers USB C
Nice! That is good to know!! It usually gets about 50% better each time.
Thanks for this tutorial! I haven't even had my controller for a year, but I can tell the micro-USB port is already showing signs of wear since it can intermittently cut out. Fortunately I have one of the JDS-05x boards so you can bet I'll be ordering one.
That is super cool! Its like they know the usb connector is bad. And thats why they dont add a usbc to it
Do you ship to Mexico im interested to buy some.
What file set did you use?
How do I tell what port I need to buy, all I see as an indicator is model CUH-2ct2u
Check the original board, on the bottom of it.
Please bring gyro aiming to xbox controller
I heard multiple say this lately. Should look more into gyroaiming.
brother
when will be the stock available?
Excellent product and installation guide!
Thanks! I just tried to put what i learned converting the controllers i have done.
Hey marius quick question do you think a dremel would work to remove the plastic provided you have the experience to use it
Does it matter which type I buy?
You need the one that fits your controller. Its marked on the board inside
As soon as your next stock comes in I'll take 2 please!. I just had my PS4 controller fail last night, and I was trying to figure out if I could swap it out for a USB-C port instead, because I have always loathed the stupid micro USB ports!, they are garbage!. I was going to get a PCB made and solder and build one myself, but then I found this in my searches, PRAYERS ANSWERED!. This saves me a lot of work, it's a no brainer!. Can't wait to order and get playing again!. I may be 44 but I love my games! and I just bought God of war Ragnarok and it's on the way in the mail, and I won't be able to play it until I get this inferior controller port fixed!. I can't wait till there is more in stock!. I am SOLD SOLD SOLD on this product!. You beat me to the idea! Well done sir!. Everything should be USB-C in my opinion. Keep up the good work!, and sending good vibes from BC Canada! - Adam
Hehe I had the same idea. Stock is gonna be updated any day now. Pcbs will get here tomorrow hopefully. Im 41 ;)
@@MariusHeier1 Ha ha right on!. Actually I noticed you are in Norway!. Fun fact, I am actually a descendant of Vikings, apparently my uncle said our family is related to the Lothbroks (Ragnar etc.), and Thorfinn (the skullspiltter) Einarsonn!, and the royal families of Europe!. It's nice to meet a fellow Viking! lol. My father was actually born in Sweden. But yeah, how dare you beat me to the idea of USB-C on PS4 controllers and making my job of replacing my stoopid micro USB port soo much easier for me!. lol!. The moment you have them in stock I'm definitely grabbing a couple!. Have a great day my friend!.
@@adamalander7515 Thank you. Likewise, that's pretty cool! To Valhalla
Haha
@@MariusHeier1 Hello again Marius, I was just wondering if you've already sold out of the USB-C boards for PS4 controllers yet?. I haven't received an e-mail saying they are back in stock, just wondering an ETA to be able to buy 2 of them. Thanks. :) - Adam
Great video, great product and a great tutorial...cheers.
Thanks andy :)
nice
thank you so much for this mod... I have always loved my ds4 controllers and now I love them more!
Hey thats awesome! :D
there will be more stuff for the ps4 coming soon :)
So I completed the installation of the 011. Looks great. Plug it in, the controller lights up! Only thing is when I took the controller apart weeks ago to see what board version I had after putting it back it it doesn't hold charge. I hoped swapping for usb c would fix it but I've got the same issue. Don't know whether to keep digging and throwing more money at it or to just buy another controller and maybe different board version if i have to. It worth changing the battery? Annoying...
It works plugged in but the ps4 button doesn't respond even then. Think that might be the issue.
Probably the battery. Or charge circuit..put finger on components on circuit board and check if any are hot.
@@MariusHeier1 just edited my comment so not sure if you saw. The ps button doesn't respond when plugged in when the rest of the controller works fine. Would that cause this issue?
Just put the controller back together think that might be it for tonight 🥲 thanks its a really great product especially for the price. If I have to get another controller and another board I won't think twice.
@@eazyrat That is just weird! Might not be related or the mcu/computer might have some issues. Thanks for the kind words :)
@@MariusHeier1 not sure you care but it was the conductive film stopping the ps button from working. Replaced it for £7 now I have a usb rechargeable dualshock 4. Thank you sir!
Damn, the controller that was included w. my fat ps4 is a 011💩 I've at least got a 030 that I apply this mod to.
Is it in your plans to include the 011 at a later date as well?
Edit:
I'm sitting and looking at your tindie page and I just wanted to double check so I haven't missunderstood anything.
Am I correct in having interpreted the description as in that the jds-5x gold look board will work with the 030?
Yes yes! I have the JDS011 right here. :) It's coming. JDS011 is the most rare controller of them all
@@MariusHeier1 Cool, looking forward to it's release👍
@@MariusHeier1 I just received the jds-5x board and I've encountered an issue.
I followed your guide and prepared the shell, inserted and plugged in the new board as shown in the video but it wont connect, light up or charge. I tried using the old board to determine which part is acting up and the controller connects fine through that one.
I've noticed two things that accompanied this behavior,
- It gets hot to the touch,
- pin 5 and 6 from the right to the left looks to be bridged.
Would using a scalpel or something else with a tiny edge to sever the tin in between the two pins help or is it fried?
Edit: It also disconnects the controller whenever I plug in the usb c board to a power source whereas the original board works fine.
@@phooopy7941 Can you drop me an email at supermariusheier@gmail.com ? I need to check what batch this came from. Can you add some close up mobile pics as well? Ill send you a new board asap.
@@MariusHeier1 Will do. I did remove what I thought was bridged solder though, using a wooden toothpick, so it seems that they weren't soldered together.
I will send my receipt / order confirmation along with some pictures in a bit though👍
how do you know which jds you have?
Either open and look inside. Or if your controller has a sticker on the back. Check the number under where it says made in china. Post it here and i can check what jds belongs to that number.
Model CUH-ZCT1U and model CUH-ZCT2U
my ribbon cable works with the micro usb but not your board. i currently have it plugged in without it being mounted and theres no light or anything and inputs arent working. not sure if i did something wrong during installation ir what
the ribbon cable wont go all the way into the usb c board for some reason
Sorry for replying a bit late.maybe you sorted it out. Did you open the lock on he fpc cable connector?
@@MariusHeier1 yes and it still wont work for some reason. i havent been able to get it to work since this comment
@@quasim0to send me an email with your order number and ill send you a new one. itsme@mariusheier.com
@@MariusHeier1 i sent the wrong order number, sending a new email now
Get a PS5 it already has a c type on it 😂
hmm
>pay $70 for Playstation 5 controller
>pay $15 for USB-C module
AWESOME !!! Top production quality !!!
I am having issues with my controller not charging after the installation. Can you help?
Drop me an email at itsme@mariusheier.com . First thing I would check is if fpc cable is flipped. Thats the ribbon cable.
@@MariusHeier1 I have sent you an email, thank you
Hi bro i have a question, does this board work on extremerate decade tournament controller(DTC)?, it is a shell for the ps4 controller.
If so i can really make a pro controller with USB-c just perfect.
Hey. Does it use the original usbmicro board?
@@MariusHeier1 the micro usb of the original controller fit perfect, the inside off the shell might be the same only the outside is diferent.
@@pedroribeiro5996 If you can snap me a picture of the inside of the controller. The usb board sitting there.
@@pedroribeiro5996 itsme@mariusheier.com
@@MariusHeier1 i have not buy the all pack yet but for the picture of the shell online i think your 5x board might be the one.
Only need to enlarge the hole a bit.
Thanks for the help 👍 .
Its gonna be one hell of a masterpiece 😎
This video is amazing. I have a question though. Will you make this project open source?
Thanks. Yes i will make it open source! Not sure when. But pretty soon.
I ordered some and never received it..
Drop me you order number here and i can resend it or refund you. Or send it to me in an email itsme@mariusheier.com
@@MariusHeier1 I emailed you the info back in Sat, Feb 24 and I also replied to your message in the website. How many more times do I have to contact you?
Ok, too much USB, do other stuff. You are awesome!
Hey man, im from mexico, how much does it cost send 1 board in usd?
Hey Erick. The price is 20USD with shipping anywhere in the world. So shipping is included.
@@MariusHeier1 thanks man, if my controller is compatible im buying it 100%, u r awesome, i love ur videos
@@Dreamerick97 Thanks Erick. The feedback means a lot. Thanks for taking time to write it :)