Easiest PS2 SSD and Fan Upgrade | This PS2 Is Completely SILENT!

Поделиться
HTML-код
  • Опубликовано: 22 дек 2024

Комментарии •

  • @notkyloren
    @notkyloren 2 года назад +336

    Instead of using FreeMcBoot, since you're using an SSD -- You should just flash the Free Hard Drive Boot image. It's basically FMCB, but works off the SSD automatically when you power on the PS2. No need for a memory card.

    • @MachoNachoProductions
      @MachoNachoProductions  2 года назад +66

      Nice! I will definitely look into that 😁

    • @That_Handle
      @That_Handle 2 года назад

      Thanks!

    • @MegaIceLynx
      @MegaIceLynx 2 года назад +12

      I switched to FreeHDBoot myself as well. I am though struggling incredibly trying to get some sort of cheat device to work on it while keeping both memory card slots open.

    • @ronaldmcdonald9328
      @ronaldmcdonald9328 2 года назад +2

      what I use

    • @MegaIceLynx
      @MegaIceLynx 2 года назад +2

      @@TogonzoMedia thank you! So many guides I’ve looked through which don’t address clearly how to configure that.

  • @mrg7272
    @mrg7272 2 года назад +12

    My uncle recently passed away. He wanted his nephews to have all of his positions and I found an old ps2. I’m going to do this to it so I can keep a little of his memories alive. RIP Uncle “Tweety”

  • @techhoarder3416
    @techhoarder3416 2 года назад +701

    For anyone doing this with a larger drive (3.5"), you need an external HDD enclosure that has its own power supply because the larger drives require a 12V rail that is not provided by the USB port. Also, Winhiip is the WRONG application to use. It is buggy and very limited (max off 255 titles, cannot handle drives larger than 1TB) and does not set up any virtual memory cards. So you would be stuck making one for each and every individual game. Use HDLBATCH, which takes care of game titles, VMCs, and doesn't have the limitations and problems with Winhiip. Lastly, if you can, go with the original SONY adapter and get a SATA upgrade kit for it (if using a modern drive). This gives the best compatibility and won't randomly die like some of the 3rd party Gamestar (and various knockoff).

    • @oPtiMuMpRiCe
      @oPtiMuMpRiCe 2 года назад +25

      You da real MVP

    • @bobsteve7312
      @bobsteve7312 2 года назад +5

      Cheers my friend!!!

    • @RiderNexus
      @RiderNexus 2 года назад +1

      THANK YOU!

    • @TerminatorZXY
      @TerminatorZXY 2 года назад +4

      You can just get an old IDE drive like Maxtor.

    • @Qseyo24
      @Qseyo24 2 года назад +1

      You got the juice Man. Saludos desde Argentina

  • @xboxmods
    @xboxmods 2 года назад +645

    Just FYI, Noctua does actually sell a 5v version of this same fan. It’s NF-A6x25 5V. They carry both voltages for a number of their fans. I learned that the hard way when I bought the 12v model for my Dreamcast and it wouldn’t spin 😭.

    • @dreamcastfan
      @dreamcastfan 2 года назад +27

      Yeah, just what I was going to say. All the Dreamcast Noctua fan mods use a 5v model, so it should just be a case of buying the 5v one and slotting it in.

    • @mbe102
      @mbe102 2 года назад +27

      I bought the wrong one for my Gamecube and it sounded like my GC was about to fly away. Getting the right voltage REALLY helps haha.

    • @trigg7466
      @trigg7466 2 года назад +12

      i Bought the 5v Version of this fan . After installing i noticed that it's louder than the stock fan. Not recommended. Gonna put my stock fan back in and just gonna leave it as is.

    • @paklekj4429
      @paklekj4429 2 года назад +2

      @@mikeycrackson wheres the exhaust fan then if you only has 1 fan option and you use it for intake?

    • @Xfade81
      @Xfade81 2 года назад +12

      @@mikeycrackson Pulling hot air out of the console is better then to push cold air in because of how the case and internals are designed. The hot air will eventually heat up other parts of the system because there's no second fan to quickly dissipate it. Other reason is because of the PSU it's next to. Your proposal will actually get more dust in to the console.

  • @James_D.
    @James_D. 2 года назад +1070

    I used to be a fan, but after watching this masterpiece I‘m a whole air conditioner!

    • @MachoNachoProductions
      @MachoNachoProductions  2 года назад +77

      Haha nice😂 Thank you 🙏

    • @scotter140
      @scotter140 2 года назад +6

      👏👏👏

    • @FatherJosephofMomma
      @FatherJosephofMomma 2 года назад +41

      As a member of the council of Dads, I give this joke the Dad seal of approval.

    • @Yakobu90
      @Yakobu90 2 года назад +1

      Cool! 😎

    • @HighAcuity
      @HighAcuity 2 года назад +18

      Have seen this joke 1000 times before.

  • @dub2536
    @dub2536 2 года назад +12

    This video could not have arrived at a better time for me as I just found my old PS2 after almost fifteen years. Very impressive presentation. TY kindly!

  • @Beezerfish79
    @Beezerfish79 2 года назад +14

    Can confirm, just did these exact upgrades on my og PS2 last month. Totally worth it

  • @maverickhuntersyd
    @maverickhuntersyd 2 года назад +4

    I love your comprehensive mod videos. I love how I can get a junk console, watch your video and then have the gist of everything I should do to it rather than seeking out the smaller mods myself on top of the major ones.

  • @robertwarnick3094
    @robertwarnick3094 2 года назад +177

    This channel is so under rated. The work he puts into these videos is amazing. I love the work you do and love the content of this channel. Keep up the amazing work!!!!

    • @MachoNachoProductions
      @MachoNachoProductions  2 года назад +4

      Thank you so much Robert!! 🙏

    • @sergeleon1163
      @sergeleon1163 2 года назад +1

      @@MachoNachoProductions agree with Robert, I'm seeing the video a few days after release and didn't see any comments addressing the scratch mark question. Although you can't get rid of them entirely you can reduce them greatly with (black) car plastic/trim restorers. Example CeraKote Ceramic Trim Coat.

    • @Salku_Chaotix
      @Salku_Chaotix 2 года назад

      I never treat this channel as underated. Its just right.

    • @ViciousAlienKlown
      @ViciousAlienKlown Год назад +2

      It's a great channel but there are channels on RUclips who don't get any views that deserve a huge audience.

    • @wyldelf2685
      @wyldelf2685 Год назад +1

      ​@@ViciousAlienKlown thanks 😂🎄👍

  • @KennytheHedgehog619
    @KennytheHedgehog619 2 года назад +5

    Just followed this tutorial and I was blown away at how much a difference this fan makes, seriously its a game changer!

  • @natethebad
    @natethebad 2 года назад +139

    A comparison video, or even just a quick community tab update, comparing the SSD mod to the Memory Card mod would definitely be interesting. also, the librarian style with your glasses at 11:40 was pretty funny and caught me off guard. Thanks for another great video!

    • @MachoNachoProductions
      @MachoNachoProductions  2 года назад +16

      Haha thank you Nathan! I will definitely do some testing and share my findings on comparing the two 👍

    • @MediocreTCG
      @MediocreTCG 2 года назад +1

      @@MachoNachoProductions looking forward to it. I recently did the game star/SSD/and fan mod myself and wanna sleep how sd stacks up for my slims.

    • @That_Handle
      @That_Handle 2 года назад +2

      🔴 My curiosity and concern lie in whether or not the memory card SD reader would have provided fast enough if not matching speeds to keep PlayStation2 consoles synced while playing multiplayer online as well as LAN-tunneling, over iLink (s400) system-link and LAN MP. Not that it's a core interest but it would be interesting to see, among those, the small handful subset of yet notable PS2 titles that often desync from others when connected online from players using different storage and pathways from which to play. Such a comparison especially in light of how much the SD card modded memory card could serve so many slim models to, potentially, vastly improve the opportunity to increase the online PS2 player base.
      🔴 Also, am curious whether the slower fan speed will cause overheating when you start using more than one DualShock controller and all the rumble Motors are kicking in as well as the effect of the USB Jacks when you are using force-feedback steering wheel + keyboard/voice chat, Rock Band peripherals once a USB splitter is plugged in, music creation peripherals or lightguns that pull power.

    • @Shelboooooo
      @Shelboooooo 2 года назад +1

      @@MachoNachoProductions Yes please. I am considering this mod but wondered about the data speed between the memory card or using an SSD for my roms of games I own.

    • @SirReptitious
      @SirReptitious 2 года назад +1

      A comparison video would be great. This is probably a stupid question, but I want to know if one of these solutions has better compatibility than the other. In the last video you linked to a google doc that listed game compatibility, and I wasn't very impressed. I'm guessing it's the same here since they both use mcboot? Are there other solutions that are better? Otherwise if I want lousy compatibility I'd just say only use PS2 emulation. I expected much better from these solutions running on native hardware.

  • @ratykat
    @ratykat 2 года назад +36

    I'd love to see a shoot out between DVD, front usb, the memory card loader from last week, IDE drive and SSD to see what the differences are in terms of load time etc.
    Thanks for another great video Tito!

    • @Legend1148
      @Legend1148 2 года назад +2

      And LAN games

    • @pizza_for_free
      @pizza_for_free Год назад +5

      Front USB is the slowest, as the ports are USB 1.1. HDD is faster than DVD. SSD is theoretically the same as HDD, iirc the PS1 hardware controlling the drives cannot actually pull the data as fast as an SSD is capable of supplying it, but I could be wrong.

    • @JorgeALXNDR
      @JorgeALXNDR Год назад

      @@pizza_for_free and using the USB 1.1 is a recipe to crash cuz it's too slow for some games

  • @rafadono
    @rafadono 2 года назад +35

    Great videos as always!
    The fan issue is not necessarily one, because you have to measure the airflow and heat transfer to see if it is a problem or not, for example, the original fan has fewer blades than the new one, so even if the new one rotates at a slower speed than it should be it can give more air and produce a better heat transfer overall.

    • @MachoNachoProductions
      @MachoNachoProductions  2 года назад +9

      That’s good to know! Thank you! I am researching better ways to measure heat and cooling since I do video covering those topics.

    • @Fogolol
      @Fogolol 2 года назад +4

      @@MachoNachoProductions i say don't worry too much about the cooling on your phat ps2, as long as it isnt RIDDLED with dust and that fan does indeed spin it will not overheat
      the ps2 slim on the other hand gets really warm

    • @CakeZombie6727
      @CakeZombie6727 2 года назад +2

      he said the disc tray was broken while it was open y didn't he put a new one?

  • @ryantakahashi9130
    @ryantakahashi9130 2 года назад +13

    Noctua makes those same fans in a 5V model already. NF-A6x25 5V PWM and NF-A6x25 5V. Not sure how long the PS2 pushes 7V but if it's only short bursts, the fan will probably be fine. Otherwise it might just need a small resistor to drop down the overall voltage some.
    That being said if the cooling is already sufficient with an undervolted fans there is no point in changing them. Fans should last longer that way.

  • @briangilmartin662
    @briangilmartin662 2 года назад +7

    As a long time fan of Dynasty Warriors, I'm loving the fact that this channel is tackling the PS2! I don't know much about heating and cooling, but I could see where someone might be concerned about the voltage rating on the fan. Especially if it's not getting enough power to do its job.

    • @MachoNachoProductions
      @MachoNachoProductions  2 года назад

      Love dynasty warriors, if been a long time since I’ve played though 😅

  • @Eventwow
    @Eventwow 2 года назад +5

    I remember the 30001 model when I was a electronics manager. It had a a lot of updates that made the system better

  • @Rappoltt
    @Rappoltt 2 года назад +36

    IMPORTANT NOTE TO ANYONE DOING THIS WITH A 3.5" HDD:
    Those single cables Tito shows and even the cables that have 2 USB ends almost never have enough power for a 3.5" HDD to work properly, even with high-power USB ports. You'll need a dock with an external power supply for those. I've been through this many many times. Don't gamble with your time, just spend an extra $10 on the dock. They dock will always work for 2.5" HDDs and SSDs, as well.

    • @banterwithbawden5444
      @banterwithbawden5444 2 года назад

      What do you mean by the dock

    • @Rappoltt
      @Rappoltt 2 года назад

      @@banterwithbawden5444 A HDD dock, if you purchase one. Dock vs cable.

  • @KBABZ
    @KBABZ Год назад

    Thanks for the guide!! I used this to install an SSD into my PS2 after the laser started acting hinky, and it works great! The only hurdles were to do with OPL, which wasn't covered in the video itself but I was able to figure out.

  • @coderkind
    @coderkind 2 года назад +49

    A comparison video would be great; guessing the internal drive will perform a lot better and work with more games. Hopefully this marks the year we get a proper ODE and HDMI solution for the console, as its library of games was amazing.

    • @MachoNachoProductions
      @MachoNachoProductions  2 года назад +10

      I’ve been praying for an internal hdmi from from pixelfx. Hopefully we get one soon 😁

    • @alexcesarcarboni3920
      @alexcesarcarboni3920 2 года назад

      As long as i know there is no ODE in the works for ps2, but the HDMI mod is about to be launched for citrus3000psi, it was scheduled for the end of 21 but i think it was delayed due the part shortage.

    • @robbyjvc
      @robbyjvc 2 года назад +1

      IMO Any company manufacturing a PS2 ODE would have a hard time competing with a FREE (as in cost, and freedom) product like OPL.

    • @alexcesarcarboni3920
      @alexcesarcarboni3920 2 года назад +2

      @@robbyjvc agree, maybe the only advantage would be in compability and ps1 Native, for sure would be who buy It, but less than other systems without a open source loader like the OPL that Works Very well.

    • @minmogrovingstrongandhealthy
      @minmogrovingstrongandhealthy 2 года назад

      Most of these videos are clickbait BS. Often the drive mods or USB lack compability and power to run a game properly.
      The ''oversized paperweight'' remark falls flat and is completely ignorant in this video because a new laser bay unit was-is still 5 dollars with free shipping from china.
      Anyone can replace it thanks to video or photo tutorials since forever. Add a chip to it to run backups that is another 10 dollars.
      You are good to go for another at least 20 years. These replacement parts will be available forever since PS2 and PS1 is still the most popular gaming system in the world and sold more then any other.
      The HDD can be optional and as a bonus, no need to ignore it's original functionality like the DVD drive and the run of original games or backup discs.

  • @kingkosher6231
    @kingkosher6231 2 года назад

    Not only will I be subscribing to this channel but I ordered everything to do this mod to my very own childhood PS2 that JUST RECENTLY had it's DVD drive fail on me. Thanks for saving my trusty PS2 from sitting on my shelf because I'd be unable to throw it out since I played countless hours of games on it. You have given my favorite console of all time new life, thanks.

  • @Fighter_Builder
    @Fighter_Builder 2 года назад +44

    I installed a hard drive into my old PS2 semi-recently and I've been having a ton of fun with it! If you told me as a kid that you could stuff a whole hard drive in there and install whatever games you wanted, I wouldn't have believed you lol
    Really nice to see you giving the PS2 some attention recently!
    Also, I personally went the route of using the SATA connector board in an original network adapter. I've heard official adapters are a bit more reliable, so I opted for that instead.
    I'm also interested in doing a fan mod, but I dunno... That old PS2 fan whirr is kinda nostalgic for me lol

    • @MachoNachoProductions
      @MachoNachoProductions  2 года назад +5

      Haha true! That ps2 fan noise is instant nostalgia 😅

    • @amirpourghoureiyan1637
      @amirpourghoureiyan1637 2 года назад +7

      @@MachoNachoProductions It's as important as the engine noise when you start a car! Switching it on and hearing the fan noise with the splash screen is just pure nostalgia for anyone who grew up playing PS2

    • @gentarofourze
      @gentarofourze 2 года назад +3

      I ran games off my hard drive in 2006, but those days it required a boot disc to get into the hard drive software.

    • @TheShogun88
      @TheShogun88 2 года назад

      I just picked up a ps2 for the sole purpose of enjoying all my childhood games, and well the soft modding as well 😅 I’m confused about the iso part of the mods though like do I have to own the games to download/Flash them on to a drive from the ISO/ ROM websites to be able to play them? I don’t own any ps2 games, and as many know they have gone up in price for the really good ones.

    • @tspawn35
      @tspawn35 2 года назад

      @@TheShogun88 So, no you don't have to actually own the game. People will call it illegal. But, no one is going to know that you don't own a real copy.

  • @GranpaSlayman
    @GranpaSlayman 2 года назад

    In tears while watching this. Brings back many memories, and now there's a way to revive one - a complete new One.
    .

  • @Fuzzy-88
    @Fuzzy-88 2 года назад +8

    Tito! Always clean and very professional videos and editing. I would love to see this setup against last week's SD memory card in the near future.

    • @MachoNachoProductions
      @MachoNachoProductions  2 года назад +3

      Thank you RYDco! Will definitely look into making a comparison video!

    • @alexcesarcarboni3920
      @alexcesarcarboni3920 2 года назад

      @@MachoNachoProductions i think that you could show usb and smb on this comparison too, just to show all options available that runs via opl.
      Maybe even show some ways to setup smb, however it's only a software side and not hardware.

  • @l00tur
    @l00tur 2 года назад +8

    Hey Tito for those scratches, you could try the plastic scratch removal liquids. I believe Novus is the brand most go with and has a 2 part plastic scratch removal/restore set that’s pretty cheap. I’ve used it for SNES, PSX, Dreamcast with success. No buffering wheels or anything, just need a microfiber cloth and you’re golden!

  • @dhoome1234ify
    @dhoome1234ify 2 года назад +8

    I've always wanted to see a PS2 mod from Macho Nacho.
    Keep it up guys ❤️

  • @AdamWulfric
    @AdamWulfric 2 года назад +4

    Maybe it's just me but I actually enjoy the fan noise it's really nostalgic besides I use a home theater system so I never really hear it anyways.

  • @mydjsobad
    @mydjsobad 2 года назад +6

    Those Gamestar adapters are SUPER hit or miss on whether they'll actually work. I've purchased multiple brand new and had issues, while using the SATA upgrade board for the official Sony HDD/BB adapter has never even once caused me an issue. If you can get one of the Sony adapters, just do the upgrade and save yourself the potential headache.

    • @dapperfan44
      @dapperfan44 2 года назад

      How was the upgrade? I bought the Kaico adapter because I couldn't be arsed to take my Sony adapter apart.

    • @thebeautifulvideogame1396
      @thebeautifulvideogame1396 2 года назад +1

      Had a bad Gamestar experience as well. The unit didn’t work with any ssd or hdd on multiple ps2 systems. Return shipping was three quarters of the price. So upgrade for me as well.

    • @mydjsobad
      @mydjsobad 2 года назад

      @@dapperfan44 the install is actually super easy, just remove a bunch of screws and swap out a ribbon cable. I used one of the bitfunx upgrades but I think they're all pretty much the same. What ultimately makes all of the difference is that the Sony interface board for the PS2 is miles better than the gamestar ones, the upgrade board just replaces the IDE port on the Sony BB/HDD Adapter

    • @dapperfan44
      @dapperfan44 2 года назад +1

      @@mydjsobad cool, thanks for the input. Might try it one day.

  • @BonkerzMusicOfficial
    @BonkerzMusicOfficial 2 года назад +1

    Amazing transformation. When I was a kid I was so dissapointed to find out that my fat 30xxx could not use a modified chip.
    Its amazing how far technology has come far, wish I had this tools and upgrades when I was young, time goes so fast :(

  • @silverian
    @silverian 2 года назад +6

    Great upgrades and it is always nice to know repairing choices to do when DVD drive breaks! I really love this kind of videos!

  • @damonwalden5699
    @damonwalden5699 2 года назад +1

    I'm extremely pleased that you rotated the logo on the disk drive when you stood it up😌

  • @whosdenzel
    @whosdenzel 2 года назад +3

    great video. but I never understood all the complaints about the fan. had a 39001 date code 3A and a 39001/N date code 3B. its definitely audible but never enough to bother me. when playing a game the sounds/music drown the sound out easily.....to each their own I guess. I think people overexaggerated it though

  • @bobsamurai
    @bobsamurai 2 года назад +1

    not sure if it was mentioned here, but you can also buy better thermal pads to improve cooling

  • @dylwingo8084
    @dylwingo8084 2 года назад +16

    Awesome videos! Really love the attention to detail and the overall quality! It be pretty cool in the future to touch up on laser replacements for both the PS2 Fat and Slim consoles, since some of us still enjoy playing Physical media, despite the digital SSD and Memory Card options available, or at least be able to have the ultimate PS2's that utilize both disc media and digital media

  • @arturowareham1683
    @arturowareham1683 7 месяцев назад +1

    Everything you do is fire Tito, keep up the great work brotha.

  • @JPHarringtonJr
    @JPHarringtonJr 2 года назад +6

    This looks like an awesome mod. I cant wait to craft the perfect PS2 for me when the time comes. I have a slim, and idk if I will search for a fan solution on that, but I confess I like the look of this original unit more. The front cover of the disc tray is iconic. Thanks for the awesome coverage as usual my dude!

    • @MachoNachoProductions
      @MachoNachoProductions  2 года назад

      I love the original ps2’s look also! Honestly might be my favorite looking console. Thank you Jim! Cheers buddy!

    • @Zulf85
      @Zulf85 2 года назад

      I've had both over the years, and there are definitely a lot of advantages to getting an original model. I'd highly recommend it!

  • @jrossofskb
    @jrossofskb 2 года назад +1

    Thanks!

    • @MachoNachoProductions
      @MachoNachoProductions  2 года назад

      Wow! Thank you so much Joseph 🙏! Happy Holidays buddy!

    • @jrossofskb
      @jrossofskb 2 года назад +1

      @@MachoNachoProductions you're welcome! Thank you and many happy returns to you!

  • @PushaTK
    @PushaTK 2 года назад +5

    SSD modding a ps2 for games has to be one of the smoothest ways to play ps2 roms using original hardware

    • @PushaTK
      @PushaTK 2 года назад +1

      Make the comparison video between the SD & SSD PS2 emulation

    • @PushaTK
      @PushaTK 2 года назад +2

      The biggest pro I can think of between the SD & the SSD is that the SD method would work on a slim PS2, whereas the HDD method requires a fat PS2. The SD method has less hardware tinkering as well, and sometimes the amount of work between each choice can influence a decision. SSD has a higher storage capacity cap, & would most likely provide faster loading times with games compared to the SD I assume.

    • @MachoNachoProductions
      @MachoNachoProductions  2 года назад +1

      I may have to 😁

  • @tzexiangwong
    @tzexiangwong 2 года назад

    Im gonna try this on my own PS2 since i still have one and it still can read games and run. Im glad i found this video, it might bring my old PS2 more life.

  • @glassvial
    @glassvial 2 года назад +27

    Biggest con would be having to remove the SSD and plugging it into a PC to load new games. I think the old school HDD adapter plus the SATA adapter shown at 3:50 might be the better option, then you can keep the network port to transfer new games via FTP. I also think it's a bit disingenuous to call the Game Star model a "network adapter" when it has no network connection, but I digress. ;)
    As far as the scuffs, you can try magic eraser as some have mentioned, but be careful as it may smooth the matte finish. Try on an inconspicuous area first.
    Yes to a comparison video, and thank you for this video, looking forward to the updates.

    • @filds1
      @filds1 2 года назад +3

      I dont think this a problem. Since SSD doesnt suffer from high usage aka storage on it like regular hdd when they go full they pretty much go down in speed. Soo you get a 250 or 500 ssd and just download shit ton of games on it since games are around 500mb to 1.45gb you can still load around 300 games on a 500gb ssd

  • @yt_dt
    @yt_dt 2 года назад

    Between the previous video and this one, you have given my favorite console, hope again in 2022

  • @bradcarlson8349
    @bradcarlson8349 2 года назад +3

    I did the exact set of mods to mine, using the same fan kit and drive caddy, a few months ago. Works great and haven't noticed any issues from heat. Also eagerly awaiting LaserBear's fan solution, just in case.

  • @Fecius
    @Fecius 2 года назад

    13:11 All of the games that you have there are fantastic! You have a great sense for gaming dude

  • @Izquierda
    @Izquierda 2 года назад +13

    Nice video! A couple of suggestions: 1) The fan mod is not really necessary, and as you noted this Noctua fan is being underpowered, if you actually tapped 12V for it it would be louder. It's not necessary because the noise mainly comes from the drives. The most silent option is actually an SD card paired with appropriate adapters for SATA (if using a 3rd party or modded first party network adapter) or PATA (if using an unmodded original network adapter). 2) Performance is better with an SSD compared to the original PATA drives (game lists on OPL and such load faster), but an SD card can be just as good in performance if not more. 3) WinHIIP is not as good as HDLDumb for loading games, though it has the useful feature of formatting drives to the PS3 format, but it is recommended to use ULauncher ELF instead to format the drive (and add OPL folder structure) while it is connected to the PS3 instead.

    • @ubermenschmexa
      @ubermenschmexa Год назад +1

      This sounds interesting and also way cheaper than the mod on this video. I'm looking to mod my PS2 to play games from a drive but never heard of using an SD card. Is there any video of how to do the things you say?

  • @omarsheriff51
    @omarsheriff51 2 года назад +1

    "The convenience of having your favorite titles is extremly convenient" I couldn't agree more

  • @W0lfenstrike
    @W0lfenstrike 2 года назад +7

    Just curious about how much of an improvement does an HDD brings to shorten loading times compared to the regular discs, especially on data stream heavy games like San Andreas. Then use that baseline to compare how it performs against an SSD (I don't expect much of an improvement due to bottlenecks) and a MicroSD card.

    • @MrGeocym
      @MrGeocym 2 года назад +1

      Orders of magnitude, even on a regular SATA HDD load times are seconds. But the bottleneck is the port on the PS2 is IDE so even a HDD is not running at full capacity, that said though, the PS2 was optimised to run from the even slower ODD so anything is an improvement
      I have a 2TB disk in my PS2 and its amazing, i have a bunch of PS2 games on there complete with box art, i use the hard drive as virtual memory cards so i never run out of space to save, i also have PS1 games and a bunch of retro emulators on there too. And all running in a minimum of 480p, some games even run in 720p or 1080i with no modification

    • @tonypham8742
      @tonypham8742 2 года назад

      Back during the HDloader days booting from the HDD was significantly faster than the disk drive

  • @sann1n
    @sann1n 2 года назад +2

    Can You tell how do you take this crazy cool camera shots with the PS2 rotating on the black background? I am impressed by the production quality of Your videos, keep it up!

  • @bingbollard
    @bingbollard 2 года назад +5

    Definitely need a MC2SIO, heat and price comparison to make an informed choice on this. Still, great video.

  • @swordsaver
    @swordsaver 2 месяца назад

    Great tutorial and you made it so simple to follow. I didn't end up changing the fan but followed your SSD setup with no issues.

  • @wetsu7648
    @wetsu7648 2 года назад +3

    Nice video as always - I did this exact mod a year or so ago. As far as dealing with the scratches on the top shell, you can use the Mr Clean Magic Eraser sponge with some soap/ water to clean and buff-out some scratches (just be gentle around the PS2 logo so you don’t rub that off) and the shell should be almost like new.

  • @JMDeathPunchDD
    @JMDeathPunchDD 2 года назад +1

    This was just so freaking Neat to look at, now im way more interested to play more ps2 games and try this out for myself. Amazing Video!

  • @victornicolasruy-diaz2647
    @victornicolasruy-diaz2647 2 года назад +5

    I'm really interested in the comparison you exposed.
    About the fan voltage issue, I think it might not be such a problem at all. Most cooling systems have tension modulators to control the speed (and noise) they run according to the heat they must decrease. If that Noctua, that we know is super efficient, work as PS2 need with a maximum of 5-7V there is no problem to be fixed.
    In fact, it's overclocking what would be a problem shortening the fan life.

  • @Rappoltt
    @Rappoltt 2 года назад +2

    It's totally fine to run a DC fan under it's sticker voltage as long as it spins and does sit there cogging. That's how 2 and 3 pin fans have their speeds modulated; through voltage. The worst thing that will happen is it will 'die' sooner, because it won't have the torque from 12v to start spinning... in a couple decades.
    You can often run them over that voltage also without consequence. A 12vDC fan is usually happiest between 7v and 15v, so 5v might be a bit low. Noctua's 5v fan running at 5-7v might be happier or last longer, but it will probably spin faster and be noisier.

    • @dev1anceONE
      @dev1anceONE 2 года назад

      Original PS2 Fan is 7v(there is DC7V 0.21A - it gives something about 1.47W) so it will be propably fine

  • @JesusRodriguezCisneros
    @JesusRodriguezCisneros 2 года назад +9

    Hey Tito! Another PS2 mod back to back :D
    This got me thinking on swapping my old IDE drive for a SATA, though I’d have to get an adapter; I guess that speed is not an advantage but an arguable better durability and a quieter solution. The fan option I’d be holding off until a more proven solution since my PS2 in on a cabinet which may encounter overheating, though I’m jealous on how quiet yours turn out!
    I guess the downside of your current setup is that for new games you have to take the disk out (though connecting my PS2 to the network is another equal pain).
    Cheers dude!

    • @MachoNachoProductions
      @MachoNachoProductions  2 года назад +1

      Yeah dude, waiting on a fan from laser bear may be a good bet. I’m sure this one is fine but I know laserbear is definitely putting in the research to make sure it’s as good or better than the stock fan in terms of cooling. Cheers buddy!!

    • @Spentbrass42
      @Spentbrass42 2 года назад

      i went and got a official network adaper and a sata board for it installation was somewhat uneventfull except for the screws holding the IDE and its power connector boards being annoying and requiring me to drill them out. but ive had no problem with the WD 500gig drive i installed with it and its a pretty viable option if you find the official one under 20 and the adapter for 15.

    • @dapperfan44
      @dapperfan44 2 года назад

      If you want to play new games without bothering to remove the hard drive, you can use a flash drive. A few things though:
      You can only use FAT32, so you can't put a game on it above 4 GB without extra steps.
      The USB ports are like 1999 technology, so load times will be slooooow. Game plays normally, though. In addition, prerendered cutscenes will play slowly too.
      I believe it's kinda finicky and only certain USB drives will work.

  • @jakeiswayblack3377
    @jakeiswayblack3377 Год назад

    Just ordered an Ocean Blue PS2, and bought everything in this vid for the build. I'm so excited to play GTA and ffX again

  • @izzieb
    @izzieb 2 года назад +7

    I feel like a SATA adapter with a built in USB to SATA adapter would be a killer product. Would making any changes or copying large files over much easier.

    • @MachoNachoProductions
      @MachoNachoProductions  2 года назад

      That would be so sweet!

    • @frankgile1996
      @frankgile1996 2 года назад

      I legit was thinking the same thing... Maybe with the USB roughly where the network used to be?

    • @sbpir92i
      @sbpir92i 2 года назад

      Or sata moterhboard 🤩

  • @sergiox03
    @sergiox03 2 года назад +1

    You’ve earned yourself a sub and a like. Awesome content can’t wait to watch more.

  • @rotallyPumpered
    @rotallyPumpered 2 года назад +5

    Putting my hand up for the comparison video. I've got a decent stock PS2 with Free McBoot, but the reliance on DVD-Rs is a bit of a hassle, especially these days when they're harder to come by. I'm interested in finding the best way to launch ISOs without discs.

    • @dmo848
      @dmo848 2 года назад

      Me super glad I saved all my blank DVD r disks n the rw

  • @wide4402
    @wide4402 2 года назад

    I bought this same TPO silent fan and installed it just the other day, very impressed with how quiet is is

  • @Kyush4
    @Kyush4 2 года назад +4

    Surprised you went with Kaico, they are shady as it gets. And Gamestar adapters also come broken or break easily.
    Great vid though!

    • @MachoNachoProductions
      @MachoNachoProductions  2 года назад +2

      I had no idea that Kaico had such a bad reputation. I’m glad I know now though 😅

    • @Kyush4
      @Kyush4 2 года назад

      @@MachoNachoProductions no worries nacho, happy to help!

  • @yashy2x
    @yashy2x 2 года назад +2

    I love this channel ❤️ i don't know why but you have gamesack and modern vintage gamer vibes to your channel ❤️❤️❤️

  • @briancernic
    @briancernic 2 года назад +5

    I was planning on doing the same fan mod but was worried about the low fan speed as well. I ended up 3d printing a mod that sits on top using a 120mm silent fan tapping into 12v. Silent still, but with tons of airflow. Great stuff as usual though!

  • @XanderRowlet
    @XanderRowlet Год назад +1

    I actually just modded my PS2 using all these parts. I encountered some issues with my SSD not being recognized all the time (applications would crash, OPL occasionally wouldn’t see the SSD, and sometimes FreeHDBoot wouldn’t load at all). I believe the issue is with the 3D printed 2.5” bracket. I think the plastic around the screw holes is too thick to allow the adapter to plug into the PS2 expansion port. After removing the mount, I’m experiencing no further issues. Just some food for thought. Plus, I’m not sure any kind of bracket is necessary if using a lightweight SSD.

  • @dapperfan44
    @dapperfan44 2 года назад +4

    I think in my experience, using an SSD does have a minor improvement over HDD. Maybe not full potential, but noticeable. Load times in games like Bully and Crash 4 2001 are near non-existent compared to the same games running off disc.

    • @Zulf85
      @Zulf85 2 года назад

      I honestly forgot that Wrath of Cortex was technically Crash 4 lmao. That game may not be the best but it can be an absolute blast to play

    • @dapperfan44
      @dapperfan44 2 года назад

      @@Zulf85 I liked it more than Twinsanity back in the day. When I first played Twinsanity I was like, this isn't Crash.

    • @popstar_pills
      @popstar_pills 2 года назад +4

      the loadtimes will be the same for an HDD compared to an SDD. Both are faster than Discs, OPL has an option to roughly match the Disc speed if it's too fast and causing issues

    • @dapperfan44
      @dapperfan44 2 года назад +3

      @@popstar_pills The bottleneck is definitely there, but the comparison video I saw showed load times about 3 seconds faster. At any rate, it's not so much about load times for me as it is cooling by having less moving parts.

  • @EndOfForever
    @EndOfForever 2 года назад +1

    I had a major problem connecting my network adapter to my ps2 after installing the fan. The 3d printed fan bracket had very loose tolerances which made the back of my ps2 buldge. That made the expansion port unreachable, no matter how tight I screwed it in.
    I recommend avoiding the fan product mentioned in this video, you never know if the 3d printed part will fit. It's doubtful they test every part for tolerances before shipping.

  • @silenthill4
    @silenthill4 Год назад +4

    getting rid of the scratch marks is easy
    just use

    • @kegajitt
      @kegajitt Год назад +3

      USE WHAT

    • @markianclark9645
      @markianclark9645 4 месяца назад

      ​@@kegajitt...silent hill is being funny...in other words use your imagination...really nothing can remove those deep marks...light scratching can be reduced by certain gritty creams like T-cut for car paint..I bought an expensive cream but it's not that great...if you buff scratches away by doing the whole top you'll lose the Blue PS2 logo...and the original finish...so you can't win...and the Chinese stopped making aftermarket moulded shells...which is annoying...

  • @chaoseagle4275
    @chaoseagle4275 2 года назад

    I only saw the amazing intro of this vid, and without a second thought i subscribed.

  • @2_19GamingGoodness
    @2_19GamingGoodness 2 года назад +1

    Great video as always, this channel keeps me modding.

  • @brianmoody9996
    @brianmoody9996 2 года назад +1

    Definitely like to see a comparison video between the ssd and sd adapter.

  • @samuraijaydee
    @samuraijaydee 2 года назад +2

    Did you cut a new thermal pad for the processors? Looks like you did, what brand and thickness did you go for? 1mm artic?

  • @shhteeeve
    @shhteeeve 2 года назад

    Definitely do the comparison with the memory card adapter, and compare to a dvd based game. Im addicted to those comparison vids!

  • @MofSeth
    @MofSeth 2 года назад +1

    i like so much those modding things, you just gain a follower cool dude :D

  • @LoveGia
    @LoveGia 2 года назад

    i've been looking for a fan upgrade for years! so helpful, thank you!

  • @mulletmcnugget
    @mulletmcnugget 2 года назад

    Nice! I put a HDD (with HDadvance) in my PS2 when I moved countries in 2005, meant i could take my PS2 in my hand luggage and be able to play when we arrived without waiting for the rest of my stuff in shipping. Now it lives in my PS2 powered Arcade Table. :)

  • @chachajee
    @chachajee Год назад +1

    Best intro I have ever seen

  • @rickygiese5846
    @rickygiese5846 2 года назад

    Awesome video and perfect timing! I just bought a PS2 off eBay and I'm waiting for my network adapter to be delivered today, I'm glad you suggested WinHIIP, I just downloaded it and am prepping the harddrive!

  • @volcanodog12
    @volcanodog12 2 года назад +1

    This is the first video I saw of this channel and I subed you do amazing work with the videos the camera work the editing and so on are so good and the modded ps2 is just what I was looking for. Thank you

    • @MachoNachoProductions
      @MachoNachoProductions  2 года назад

      Thank you so much! I’m glad you found the channel and are enjoying the videos!

  • @TheDramolcan
    @TheDramolcan 2 года назад +1

    Its time we see some wireless controller options for PS2.

  • @jls9225
    @jls9225 2 года назад

    Always worth the wait. As Always, Be Smart and Stay Safe.

  • @Bromon655
    @Bromon655 11 месяцев назад

    You can’t have the ps2 experience without the iconic jet engine fan. Sounds of my childhood

  • @geoff3610
    @geoff3610 Год назад

    hey so, you asked about fixing the scratches on top. I was thinking about a technique used in automotive interior restoration where they can take old plastics and run a torch over them lightly to melt the surface back to a glossy finish. They also do it for plastic stadium seats that get baked in the sun and such. obviously if you tried to fill the scratches or something along those lines, it would stick out, unless you perfectly matched the original texture. But running a torch may help even out the color imbalance, and make the scratches blend in a bit more.

  • @gumbyx84
    @gumbyx84 2 года назад +1

    I'd like to see a quick comparison video between the adapters

  • @itzkyoi
    @itzkyoi Год назад

    THIS IS WHY I F*@KING LOVE MACHO NACHO!!!!!

  • @enermaxstephens1051
    @enermaxstephens1051 Месяц назад

    For those scuffs on the housing, I would try a plastic polish. Something like Norvus, which is used at aquariums to keep many of their plastics looking good. You may need a very small polisher to get the best effect. If that didn't get them out, I would consider hitting just the top with a new coat of paint. If you get the color right, nobody would ever know the difference as long as you made sure you got those scuffs polished with the Norvus first.

  • @TingFeng77
    @TingFeng77 2 года назад +1

    A con I would add is that the fan connector is rather fragile, it’s very easy to rip the entire connector off the board so you should be careful when doing so

  • @TheDaxter11
    @TheDaxter11 Месяц назад

    From what I've seen in other videos like Spawn Wave's, if you use the Free Boot card and you plan on ripping games from their disks with it, it'll just give you the option to format the SSD or hard drive on the PS2 without needing to connect it to your computer.

  • @G59Loser
    @G59Loser 2 года назад

    Thank you so much for the ps2 content. recently I found you through your various gameboys mods, but the ps2 is a very special console to me it’s my childhood system.

  • @jnewbon00
    @jnewbon00 2 года назад

    Love the intro man I had the lynx as a youth.

  • @Jamesssssssssssssss
    @Jamesssssssssssssss 2 года назад

    This is awesome, i no longer have my PS2 but might pick one up if i see one.
    Awesome channel, subbed!

  • @cajun4christ
    @cajun4christ 2 года назад

    Still the BEST intro music on RUclips!

  • @djb1ge
    @djb1ge 2 года назад

    I’d honestly want one of these preloaded with all my old favs from that generation over a PS5. Time to start saving up!

  • @bland9876
    @bland9876 2 года назад +1

    You will usually see a performance boost in random reads and wrights no mater what system the SSD is installed in.

  • @brendanjameswilliams
    @brendanjameswilliams 2 года назад

    3M magic eraser with some water and a little bit of pressure got a fair amount of the scratches on a matte black ps3 I had.. definitely worth a try.

  • @MegaManNeo
    @MegaManNeo 2 года назад +1

    Other than the need to clean and this particular PlayStation2, I actually really like this mod.
    All people need to do is to swap parts which is probably the easiest thing about hardware in general.
    The SSD preparation looks simple enough too which is great.

  • @Redonepunch
    @Redonepunch 2 года назад +1

    The fan is thicker so hopefully it should compensate for the lower RPM. Putting my hand on the back of the PS2, I can feel plenty of air moving with the noctua fan.

  • @KillingBytes
    @KillingBytes 2 года назад

    9:40 you should mention that winhip dont work with 2tb hatd drives. And pls more ps2 and maybe ps3 or vita mods i love it ❤️‍🔥

  • @tunacious
    @tunacious 2 года назад +1

    love the intro+++ First time here.

  • @Trains-With-Shane
    @Trains-With-Shane Год назад

    not especially playstation 2 related but I used that same StarTech USB to 2.5" Sata adapter a LOT when I worked in my previous I.T. role and I love the thing. I keep one in my laptop bag and one in my desk drawer.

  • @PelicanGamer2012
    @PelicanGamer2012 2 года назад +1

    That intro was so dope

  • @retrojb101
    @retrojb101 2 года назад

    Def interested in a comparison video. Keep up the great work Tito!

  • @madmax2069
    @madmax2069 5 месяцев назад

    The only thing that id do additionally is have the internal battery relocated to some place that doesn't require tearing down the entire system to replace it.
    3:38 if you can, just buy an Original PS2 network adapter and get the SATA upgrade for it. Those seems to be a lot better than using those Gamestar SATA adapters, plus the gamestar adapter doesn't have network functionality.
    Some games will also kick the PS2s fan into high (Tribes: AA as example will use the PS2s high fan speed mode).
    The issue I have with the Noctua fan mod is that the sellers are using a 12v fan. Running a 12v fan at 5v is going to move very little air (that is if the fan starts at all, some of the 12v fans I've seen wouldn't even start at 5v, even at 7v the 12v fan is going to underperform quite significantly vs the stock fan in the PS2. There is the same fan but in a 5v version, BUT the fan would be at full speed when the PS2 is at idle, and overvolting the fan when it's at high speed. You could put a buck converter set for 5v in-between then PS2 fan output and the fan so that the 5v fan isn't going to be overvolted (as that will usually burn out the fan).