Protect Your Vehicle from Automotive Theft - What This Device Can Do Will Shock You
HTML-код
- Опубликовано: 28 май 2024
- 0:00 Intro
0:27 PIN LOCK - Initial release
1:59 Double Bypass
2:20 New 2.5.9 Security/PIN Menu
3:09 PedalDisable aka KillPedalNow
3:59 PIN Pedal, brakes, lights, horn
5:01 Carjack Mode
6:48 Pin Clear
7:07 KillByFob
10:12 Generally how thieves steal cars
11:10 KillByFob Best Practices
11:49 Final Steps
This video goes over all the new features of the TaZer Security/PIN Menu in TaZer Firmware 2.5.9 - This firmware is currently in beta, but can be downloaded directly from our Z-Automotive ZPU Software.
There are a ton of new features in the TaZer which should help to deter automotive theft of Mopar vehicles.
The TaZer is an electronic programmer which can be used in Mopar vehicles including the Dodge Charger, Challenger, Chrysler 300, Jeep Grand Cherokee, and Dodge Durango. The TaZer has a ton of features and functions that it can unlock, but we are excited to reveal our newest PIN LOCK features.
When triggered, PIN LOCK lock up the vehicles brakes, flash the exterior lights, sound the horn, and even disable the gas pedal.
Choices within the Security/PIN menu include:
• Set/Clear PIN - allows you to set a new PIN (if unlocked) or clear the PIN (quick if unlocked, times if locked)
• Enable/Disable PIN - allows a quick disable without having to clear and then re-set PIN.
• KillPedalNow- a “high security parking” mode where you can pre-disable the gas pedal, even if the Tazer is removed, can toggle on and off. Automatically re-enabled when PIN is entered.
• PIN Brakes - choose if the 4 brakes will lock when PIN triggered and vehicle is stopped.
• PIN Horn - choose if the horn is to blow in a semi-random pattern when PIN is triggered.
• PIN Lights - choose if the light show starts when the PIN is triggered.
PIN Pedal - choose if the accelerator pedal is disabled when PIN is triggered.
Will also disable pedal if vehicle alarm is triggered or a key pairing is attempted. If enabled this function will operate even if PIN function is disabled. Note: When pedal is disabled there will be several warning chimes and lights as if there are vehicle errors. When re-enabling the pedal while the vehicle is running, the engine may stumble or stall. These are normal.
• KillByFob - If enabled, locking the vehicle by keyfob will disable the accelerator pedal. Unlocking with THE SAME FOB will re-enable the pedal. If enabled this function will operate even if PIN function is disabled. If a PIN is set (regardless if PIN enabled or not) and the vehicle is entered without using the same keyfob used to lock it, the PIN will need to be entered to unlock. Flashes exterior lights 2 extra times to show as confirmation the pedal has been disabled or enabled. Requires that a PIN is set as a backup method to disable. VIN must match too, to prevent using another Tazer to re-enable the pedal.
• Carjack - Enables/disables Carjack protection. Carjack triggers whenever the key exits a running vehicle. Requires PIN set and Pin Enable are on.
• PIN Clear Time - choose if it should take 10 or 60 minutes to clear a forgotten PIN.
(Backdoor to unbrick pedal and clear PIN by using key supplied by customer service.)
Purchase your TaZer Module here: www.zautomotive.com/product/z...
Purchase your Double Bypass here: www.zautomotive.com/product/z...
Follow Us:
Facebook - / zautotech
Instagram - / z_automotive
Tiktok - / zautotech 
Авто/Мото
We can't thank you guys enough for helping protect our cars. This is by far the best mod for any MOPAR
Appreciate this comment so much, thank you for your support
Facts
This is amazing. I love how zautomotive continues to offer more features. I recently purchased an additional tazer for my Durango (currently have one on my challenger too ) specifically for the pin lock feature. You guys rock for protecting our beloved mopars!
Thank you so much for the kind comment and the support
@zautomotive will this work on all Mopar ? Chrysler 300 as well ?
I have the Tazer in my car and definitely gives me peice of mind. Thanks a ton! Definitely looking forward to the new updates.
Appreciate the comment and your support. Very happy we can help give peace of mind to our customers and community
You guys stay on it. We definitely appreciate you guys. 🙏🏾
Thank you!!! And appreciate the support and comment
Along with these security features, love the Tazer in general. Thank you!
Glad you like them!
Unsung heroes. Thank You Z.
I got my tazer, back in 2018, when bought my RT. Now, I have a hellcat and I'm glad I bought it more than ever.
Excited for the new features!
Legit just watched the tazer save a guys challenger 392. Thieves broke in and the brakes locked it’s truly amazing listening to them try to figure out why the car won’t move 😂😂😂
Let’s go!!
@itsJustDaniel Where can I see that video?
I picked one of these up recently and love the features. Just stumbled on this video, will I receive an email when updates are available for the Tazer?
HONESTLY you guys are amazing wish you guys could design the cars security systems
Thanks! There’s plenty of good security options out there, but we wanted to at least offer a free update and option for our customers
One recommendation i would love to see for a future update if possible is an option that automatically locks the car after a set period of time if the car is left unlocked with the keyfob out of the car. Having the option to choose between normal lock and pedal kill lock in this scenario would be great as well. To many times now adays you see people just accidentally leave their cars unlocked due to keeping their keys in their pockets and not even thinking about it.
www.zautomotive.com/suggestions/
Does pedal disable still work for those who have Pedal Commander or other drive by wire eliminators? Also, when adding the 2nd OBD2 port in the trunk, is it going to screw with the factory port when I go for emissions?
My only wish is that when you show the options like setting pin, turning off pin, KillbyFob selection, is that you tell us: "With the car running you do this, or with the car in the run position, you do this." That would be very helpful for me and I am sure others as well.
All of these are live features, therefore the vehicle is on with the ignition running...
Would the features still work if someone disconnected and reconnected the battery ?
Question here. For the 2011-2014 cars with the 5 speed auto Will pinlock be able to tell if someone has pressed the shift lock button and activate the pin lock? It is much easier to do it on those cars with that transmission. Thanks!
This works I had someone today trying to steal mines bust my window out
what are the button prompts for the 11-14 charger?
damn you guys are great. I can't wait for this feature to go live. another reason for loving my tazer and zautomotive. 1000 percent better than what stalantis has never offered its customers. my Durango can now be safe
You don’t know how much we appreciate seeing comments like this! Thank you for your support and thank you for watching
Use the kill by fob all the time and works pretty well. Tired the pin but had issues with it not taking and then my car going into lockdown so I'm glad that they added that feature (lets hope I dont run out of battery on the fob while I'm out 😅).
if you're on the latest firmware, entering the pin is much more stable and snappy
I'll check my version and update it if its out of date and try again. Thanks!@@zautomotive
Did you ever fix your pin situation ? Even after inputting my pin and getting the Disabled prompt my alarm still goes off.. sucks. Had to turn pin off and use only FOB function
@@nbtextremes I did an update and it fixed it. When I use the FOB I don't have to put in the pin, but if I forget and just hop in (which happens from time to time) or manually lock the doors with the button, the pin has been working as advertised.
@ajperkins9363 I realized it was because I out the pin in with my door open during testing. It was taking the pin but disabling the system. I thought that was weird ..I closed the door, did same thing and it worked
Can't wait to order mine soon
Bought a Tazer for my dodge charger r/t. They are big ticket cars in my area. The Tazer security gave me the ability to sleep at night without worry because that car isn’t going anywhere without the pin. I even reduced the pin so you have much less time to work it.
Great to hear it can give some peace of mind but remember that it is not a fool-proof security device, so be sure to take as many added precautions as necessary
Very cool.
What’s crazy is yall have better safety functions and protocols than Dodge!!!
We’re at least trying. Thanks for the comment
This is great information, can't wait to update mine, but my question is what if you have this stuff activated and something goes wrong with the tazer or it malfunctions how will you drive the car?
Contact us
Is there a way to get the orange ring DRL on my 2021 Charger like how it comes factory on the 2022+ models?
Can’t wait! When will the update be available?
Currently available only as a beta firmware, it can only be found and downloaded directly from the ZPU software (may need to delete ZPU and redownload it)
Question: Does remote start via the UConnect still work with Tazer installed?
The TaZer shouldn't interfere with that
Newly subscribed, and love the features. A question, does Mopar have a physical key anymore for door locks and ignition, or have they gone completely keyless?
Does your system also work with any car brand? We have.a 2019 Toyota that me and wife love.
Cheers mate… ^^
From what it looks like, every car brand has done away with physical keys
Our product is only compatible with Mopar vehicles as we are a small company
@@zautomotive Thank you very much for your fast reply… and I’ll remain subscribed to your excellent channel anyways. ^^
@@zautomotive well, if you ever decide to design any for Toyota, Id be interested…. ^^
Hi looks like an amazing product just for these features alone never mind all the other things you are able to do with it. I have a 2020 jeep gladiator and was looking to get the tazer JL mini. Are all these features including the kill by fob avaliable on the Tazer JL mini also? Thank you for your time.
Sorry no, at this time the Tazer JL mini does not have all these updated features due to space limitations on the device.
Here’s what the JL currently supports as far as the pin lock features: ruclips.net/video/MdBOqbL4u0s/видео.htmlsi=2eialPp2HuC5FIED
Thank you for the fast response. It shows great customer service. Is there any plans on new device for JL that would alow space for this. Thank you again.
There is certainly talk of various options to make these features available to our TaZer JL Mini customers@@earlybroncotiago546
Thank you that's good news as that is a really good feature. I will keep my eye out for it.
Greetings , I am getting a wrangler. Great video how would I remove the need to plug in a taser in the front where it can be removed. Will this work with a taser min ?
These updated features are not yet available on the TaZer mini, just the base pin lock features where it locks up the brakes. You could always purchase out TaZer shield to help from the TaZer mini from being removed www.zautomotive.com/product/tazer-shield/
Where can I get that shift knob that the challenger has?? 😍😍
I love this update and can’t wait to put it in my charger. My only concern is some people who have the pursuit model such as myself have the fob for the car and can get in and start the car and go but can’t use the lock and unlock with factory key so they have a aftermarket alarm system. Is there a way to still use kill by fob? This is a feature I’d really love to use.
Don't believe that would be an option without the OEM key, but would have to check with the engineer
@@zautomotive I have the OEM key fobs but it doesn’t allow me to use the lock and unlock buttons. I have to use after market viper system key fobs.
I have a 2015 Challenger, i got update 2.5.9 and have loved it thus far but i got 2 things i would like more info on. Ever since updating to 2.5.9, now when i open my door with the engine on my car makes the chime sound and flashes "fob battery low" on the dash until i close the door. Not sure if that is a feature or a bug but im not a fan of it and am hoping there is a way to turn that off.
My second question is regarding the new way pin lock acts. While overall i like it, i am a little concerned that 40 seconds is a bit to much time for a smart dodge car jacker to get the car on and moving before pin lock kicks in and even then it's still a matter of when the car slows down enough before the brakes actually lock up. I totally understand the car having to be slow enough before the brakes lock but my question is, is it possible to shorten the time from 40 seconds to say maybe 20 seconds or less before brake lock activates? Personally i would prefer 10 seconds but that's just me. If not i think this would be a great option to let us choose in the future and possibly consider shortening the time for by default. The Average theft time of a Challenger is 40 seconds but that includes the time it takes to get into the car and start it. Once thiefs start the vehicle they're pretty much gone within 10 seconds or less most of the time. In this regards i actually think the old pinlock method of locking the car on start-up was safer.
That being said i do like the idea of having an initial delay (the new way pinlock is) but I think how long that delay is really should be customizable or give us the option to lock on startup like before. 40 seconds is just to long in my opinion. Sorry for the long comment just wanted to put my experience out there. Love your guy's products man you guys do incredible work, keep it coming💪
The "fob battery low" notification is warning you that Car-Jack Mode is going to activate if the key is removed from the car and then the car door closed. In 2.6.0, it will just flash the hazards and you will hear an audible tick
You can add your concerns about the Pin Lock countdown here: www.zautomotive.com/suggestions/
Big Question Involving Pin Lock with "Kill by Fob". My understanding is that "Kill by Fob" does two things at the same time when Pin is enabled:
1 - It prevents theft by copying Fob signal to foreign fobs
2 - The function allows you to bypass the pin when using the same fob that locked it.
Car thieves are getting wise (or even dumber) by now attempting to steal the keys/fobs at gunpoint, so I want to use the 'KillByFob" function to deter theft by signal copy, but DON'T want the easy Pin bypass if a car thief comes up to me at work and says "Give me your keys" to which gives them the bypass since the fob was the same to lock it. Is there a way to retain the security benefit of "KillByFob" and still require the Pin entry - even if it's the same key fob?
I would rather throw the keys at the robber and run away for safety, and still have my vehicle require the pin to thwart the theft - without compromising the ability to deter thieves from copying the signal.
No. This is not designed to deter from robbery of someone’s keys. Not even designed as an antitheft device but an added layer of protection to the already jam packed Tazer as an additional feature
Hello, is there a Tazer product for 2023 Dodge Durango R/T ? I saw on the website that it will not work with Uconnect 5? Will there be a future Tazer for newer Durango’s
We will see, the Uconnect 5 has given us a ton of compatibility issues
Hey question - I’m have an rt and I did the trunk installation of the tazer. Everything works except my srt pages l. I still have default screen. I’ve did reboots and sleep cycles but the srt pages won’t come up
Email support, there are certain specifications- support@zautotech.com
I just bought and updated my Tazer to the latest Uodate 2.5.9
Does this update include the windows up and down feature or do I have to download all the firmware individually?
It has everything, please email support if the windows feature isn’t working. Doesn’t work on all models - email support@zautotech.com
WHOA HOLD UP! What was that Scat Pack logo on the infotainment screen!?! I want it!!
Sorry, not a TaZer feature and not something that we can enable. That was a file the boss downloaded and had to upload via usb stick, but he did that about 7 years ago and doesn't remember the process
I noticed this too lol..I was like wrf
Would I be able to use say a compustar fob instead of my OEM Durango key fob with these new features? Specifically the kill by fob?
No, it’s programmed for the OEM key
I'm not sure if this has been covered but how does this interact with remote start? I'm in the midwest it gets cold here.
The newer updates 2.6.0 and above, it works fine. Countdown starts once you get in the vehicle
I'm considering getting one ever since my car got broken into about 2 weeks ago. But won't this void warranty? Or am I blending this in with your guys' tuner?
This is our tuner, this is the same device that has all those other features that you’ve probably heard about (Linelock, lightshow, performance pages on certain models, etc). It does not void warranty but it’s recommended to remove the device before taking it into service
@@zautomotive Ah, so its just plug and play, and the tuner itself kinda holds the info and feeds it to your car, in a way? Like a temp load for your cars computer and when its taken out, its not modified?
correct all plug and play@@bhagrt
cant wait for (PIN capture) mode!
doors lock, AC vent pumps succinylcholine, and the dash cam live-streams video of the unconscious thief to me and the cops.
Lol I think you took our April Fools video a little too seriously
I have the Burnbox Hellcat. Any chance of adding the PIN security features to that?
Sorry it’s a TaZer exclusive feature
Any problem using this with manual trans?
What shifter is that
What happens if you have the pin lock enabled and all the pin lock triggers options selected? Does the killbyfob over ride entering the pin entirely for all the pin lock options or just the pedal? I just bought the DL for my TRX and loving it so far but I am still trying to learn it. Thank you!
So although Pin Pedal and the KillByFob both disable the gas pedal, they are different features. Pin pedal will only disable the pedal when Pin Lock is triggered; when the countdown runs out, or the vehicle is put into gear before the Pin is entered.
KillByFob is similar to KillPedalNow in that it's more of a pre-bricking precaution, both of which will keep the pedal disabled even if the TaZer is removed. Whereas, Pin Pedal only disables the pedal when Pin Lock is triggered and when the TaZer remains plugged into the vehicle.
KillbyFob can be disabled by the keyfob and by entering the Pin, whereas KillPedalNow can only be disabled by entering your PIN from inside the vehicle
@@zautomotive Thank you for this explanation and for all of your guys hard work!!! In other words, it adds like double protection with pin lock set and killbyfob used simultaneously, the way I see it
@@JR-pb5dz indeed. Thanks for the questions
On a manual transmission will pin lock activate once the car is put in gear like an automatic or does the countdown have to hit zero before the pedal goes dead and brakes lock up?
Another question. With the pedal being bricked. Would this help degend against ond2 and can bus attacks? Like is it only easily removed by your tazer.
As far as we know. We don’t know of any other way to unbrick the BCM except through the TaZer, but we’re not 100% sure of all the ways they take the cars, that’s why we say it’s good to have multiple layers of protection. We are constantly researching and adapting the feature and products as we find new information
Thanks for your response. I think the bricked pedal will stop most people from stealing the lower trim models. Mine is a 14 charger se with the v6. But it has the sport trim package. For sure though the higher trim packages people will need expensive equipment and expertise to un brick the pedal. But I think for most cases it should be good.
@@jonathoncouchey7151 hoping so as well
Question about the carjack feature. You demonstrate the owner/driver leaving the car with the key fob. But what if the fob is left in the car? Or what if the carjacker demands the fob? Will PIN lock still function and lock up the brakes even these instances? Does the mere physical action of opening and closing the driver's door activate carjack mode?
If the "keyfob missing" notification doesn't trigger then there is nothing telling the TaZer that the vehicle is being carjacked
@zautomotive and at that point, one should have a tracker on the car or a remote kill switch to kill the car from your phone, just in case
Is there a reason the pin menu doesnt pop up on my 2015 rt? It makes the hazards blink when i start the car but theres no notification so when i start unlocking the car, I'm never sure if my inputs were recognized. I'm wondering if my car is too old or if theres an update i should be doing to the tazer or uconnect. I'm on version 2.5.9-033023.
Email support@zautotech.com
When enabling key by fob, does the car have to be on to enable the setting?
Or have it on Run?
No. Please refer to the “killbyfob best practices” section of the video. The vehicle is off, and the car is being locked by the lock button on the keyfob
@@zautomotive I was reading the manual and it stated that the car had to be on. It confused me and that’s why I was clarifying. I love all your videos. They are very easy to follow. Thank you very much.
To use the kill by fob feature does the Tazer need to stay in the car, or can it be removed when we exit the car and the feature still work?
To activate KillByFob, the TaZer needs to be plugged in. But once KillByFob is triggered, even if the TaZer is removed, the pedal would remained disabled. Which is why we like this feature so much
@@zautomotive Thank you so much for the fast replay! Mine will be here tomorrow, can not wait to try it out.
Is this update available? I’ve updated my taser with the latest version on my computer and I don’t see any of these features , the latest version on my computer shows 2.5.9
2.5.9 is the latest firmware. As mentioned in the description, it is still a beta firmware and will contain bugs, so please be aware of that. If you decide to download it, please report any bugs to customer support via email - support@zautotech.com
Is this available for the jeep JL as well as the double bypass
No double bypass for the JL since the JL uses the security gateway module. Pin Lock is available but only the base feature of locking up the brakes
I have had my tazer in my car for about 2-3 years now do I now need to purchase a new one to get this theft protection?
no just update the firmware
What if you disable the pedal through the menu and leave the tazer in and someone finds it and rips it out and leaves with it, would the car be permanently disabled?
Yes you would need to contact us
If i have viper two way how do lock by fob work..i havent set up my pin yet so also will it work with viper for carjack mode
You'll need to contact customer support and they should be able to help you with that - support@zautotech.com
I just got the Tazer DT for my TRX recently, oddly enough I can still put my truck into gear and drive even without entering the pin. Also even know it's married the pin countdown does not pop up regardless of info screen and I can clear my PIN without having to confirm my old pin.
1. The Tazer Pin Lock does not stop the vehicle from going into gear, and you need to turn on the other features for something to actually happen (brakes locking up, horn going off, pedal going dead, etc)
2. The Tazer does not need to be married to the vehicle for Pin Lock to function; Pin Lock is a live feature
3. You can clear your pin without re-entering your pin. You’ve already entered your pin, that’s the only way to even get to the clear pin option
You mentioned if we valet the car or take it to a dealership we can use PIN Disable, does this mean we don't have to unmarry and unplug the device anymore when we take it for service?
That depends. It's always recommended to unmarry and remove the TaZer before any service work, but some people may have dealerships that know of the TaZer and may have a good working relationship with them.
PIN Disable may be a useful option for those that have that working relationship with their dealer, although keeping the TaZer plugged in is not recommended for service work.
So if I use remote start, will that trigger the countdown for pin lock or only when I go from remote start to actually starting the car, will that trigger pin lock
no
So you can still remote start with all this stuff on?@zautomotive
Is the anti theft available for the Ram 2500 power wagon?
Sorry these features are not yet available on the TaZer RAM modules
What about if u have the brake lock on and u pull the neutral strap can it still go into neutral???
Sure
Any chance for this coming to other platforms? Cadillac CTS-V?
Most likely not. We’re a very small company and have our hands full with the Mopar vehicles
After locking the car with the key fob, then coming back later and opening the car with the key fob you don't need to enter the code yes? Is there a certain amount of time that you have to start the car after using the fob? EX: I unlock the car with the fob, a friend calls me over to see something in his car. This takes a minute. If I get into my car, (don't forget I unlocked it) can I just start it without using the pin?
Yes, there is a certain amount of time before it will start asking for the pin again even if you unlocked it from the key fob. The time it takes for the vehicle to full go to sleep varies per vehicle. Once the vehicle goes to sleep, the TaZer will ask for the Pin the next time is is started
Thanks for the comment, hope this helps: ruclips.net/user/shortsh0AahRqf_5M?si=aOLmKinP7q4h_-WH
Question.. what if I’m sleep or sitting down somewhere and someone takes my key fob and unlocks the car from the fob with killbyfob enabled.. they can just start the car and drive away since the pin will be bypassed?
Don’t get your key stolen 🤷🏻♂️
@@zautomotivelol fair enough 😂
Does Killbyfob work with manual transmission vehicles, or is it solely for automatic transmission cars?
Manual too
Can you still remote start and still have the bricked pedal?
Remote starting would unlock the pedal
2:30 so you just skipped to where it is and i can’t find the option anywhere ? heard you have to update the taser , so could we see that too? or does anyone know how? does anyone know how to find the option for the pin ? this was one of my biggest hopes for this taser and i still yet to find it enable it .
Yes, the TaZer needs to be updated, and here's how: ruclips.net/video/mntTbwdrAgo/видео.htmlsi=h3saa-VkyiLzxA7N
With the TaZer updated (latest firmware is 2.6.1), as soon as you select the TaZer Pin/Security menu it will ask you to set a pin.
All details on page 15: zautomotive.com/zpu/instructions/TazerUserGuide260.pdf
What happens if they pull the neutral release while the brakes are engage, will the vehicle still not move?
Depends if pin lock gets triggered
Will remote start work? It will be awesome if it worked for max 2 minutes just to warm the engine on winter
On the 2.6.0 it will
How well will these features play with each other combined with a compustar T12, or T13?
Should be fine
Ok great I've just ordered your product just waiting on the tracking number. I'm very excited to use this product.
Pin brakes on question !
Will the breaks still remain on if the pull lever under coin storage is pulled ?
The neutral strap?
@@zautomotive thats right !
Reason why I’m asking because my car was stolen last week and they just put it in neutral and pushed it away with another vehicle.
@@mankamalchana4956 that’s awful. We have nothing in place that can stop that or being taken from by a tow truck. Even with pin lock, the vehicle can still be put into gear.
Sorry the vehicle was taken
The killbyfob mode is enabled. If I don’t enable PIN Lock and I only enable on killbyfob if I only have that feature on. Does it disable gas pedal by default?
You don’t need to have any other PIN Lock settings enabled and can just have KillbyFob enabled, although a PIN needs to be set to access the PIN/Security submenu, which killbyfob is in
@@zautomotive got it, thank you.
So is the killbypedal and killbyfob in the 2.5.9 update?
yes, please see the description
@@zautomotive my bad. I’ve been going back and forth between here, update notes and the instruction manual on the website.
Would my taser require an update? I never noticed a pin or pin lock pedal disable etc. I had mines going on two years now
yes, if you see the description this is on firmware 2.5.9 and our most recent firmware is 2.6.1
@@zautomotive thanks for hitting back. I updated and loving the new features. Freaked me out at first forgot my pin😅 but everything ok now. Last thing. Does the window feature work on 4 door ?
No the windows feature is for the front only ruclips.net/user/shortstSO8kiJMBAk?si=_WmOkH7C69cmt-Ey@@bloodlife7972
Hi I use kill pedal disable. When I turn it on. Later I came back. This future is not working? Do you know why?
Did you enter your pin therefore reenabling the pedal?
I wish y’all would have come out with this before my Hellcat got stolen at last years hot rod power tour. I had a Tazer Burnbox on it.
Sorry to say, but the Burnbox wasn’t going to be getting this update anyway; it’s exclusive to the TaZer
@@zautomotive it really should since Hellcats are some of the more popular ones getting stolen.
@@thbbbt the TaZer is compatible with the Hellcat
@@zautomotive can I get a discount on one for my Jeep Gladiator? It’s ok if the answer is no. I’m buying one next month anyway. :)
@@thbbbt you can if you’re a veteran, active duty, or EMS
I have a 2016 scat and hellcat I can’t find the pin option to use it? I’ve updated both but I don’t see the option to set it up?
It’s a live setting, vehicle engine must be on
@@zautomotive I got it figured out lol but I appreciate the reply.
Will this work on a 2019 Durango SRT
Yes
Is there a way to properly set up the pin in my 2012 Dodge Charger? I’m afraid to do something wrong and my car gets bricked
If you’re concerned about that, we don’t recommend downloading the firmware at this time, as it is a beta version. If you have concerns, wait until it is tested a bit more and then download the firmware when it becomes available on our site
@@zautomotiveso is that y i couldnt set my pin… i tried over and over and it kept going to cruise on and off but not pin set.. i downloaded the update.. so idk what i did wrong
@@sunshine48213 that’s not an issue we know about, reach out to support - support@zautotech.com
Can you kill the brakes and the gas pedal every time you lock your car ? If they don’t start it and try to push the car
You can kill the pedal every time you lock your car, but the brakes will only lock when the vehicle is running and the Tazer plugged in
Is Pin Lock available for Tazer RAM yet?
No not yet, the TaZer RAM gets the last of the updates because we don't have a DS Ram of our own to do testing on
Does the kill by fob work even with tazer removed?
It can’t initiate and enable KillByFob without the TaZer plugged in, if that’s what you’re asking
Where can i download 2.5.9? All i see in my programming tool is 2.5.8 for new firmware and 2.5.6 for the previous firmware. 2.5.9 not visible at all
Update: My issue was the version of ZPU not being up to date. I installed the most recent version of ZPU and then the new firmware was available.
@@IxXDOMINATORXxI glad you found it. 2.6.0 should be coming out very soon
Will this work on 2011 to 2014 chargers ?
yes
Please, can anyone tell me if the tazer works for cars with the security key fob update installed? Asking bcz I can no longer get the COMPUSTAR alarm installed becuase I got key fob lockout update
It does
Hey brotha, I enabled the window up and down mode.
I did a full reboot and 2 sleep cycle. I click unlock x6 times. It doesn’t work. I have 2023 Challenger Scat Pack
Contact support
Can I use the tazer with the pedal box pro?
Don’t know what that is, but most likely. Email our support staff and they’ll let you know for sure - support@zautotech.com
I love this feature, but it messes with the intake temp gauge. Keeps setting it at -83 and bounces erratically. Other than that, it’s cool.
We've never heard anything like that happening, please email in so we could get more information on that - support@zautotech.com
Recently installed, turned on all the pin features but when I lock with FOB the vehicle does not double blink. Did I miss a step?
Is the throttle getting disabled?
Are you able to unlock the door with proximity entry and see if the pedal is killed?
@@zautomotive It did not disable the throttle.
@@svdpschoolsalem very odd. Reach out to support - support@zautotech.com
Killbyfob is definitely enabled, and Pin enable is selected “on”?
In your car jack mode, you take the keys out of the vehicle and place them outside. You get back in the car, try to drive away, then the car locks up after coming to a stop. You then enter the code, to unlock the vehicle, you said, "The vehicle shuts off" then you enter pin, put it in gear and you drive on. How did it start again without the key?
That’s actually a very good question… I’ll need to look into that a bit more, could be vehicle specific, as it didn’t fully fall asleep and electronics were still running.
Have you figured out the problem of starting the car while the keys were outside the vehicle?@@zautomotive
After taking a closer look with our support staff, the car allowed us to turn the vehicle back on even without the key (and after entered the pin) because the vehicle was still in gear@@rbaroncpd
I have to ask would if the theives take you out your car and ask for your key before he leaves? Are we shyt out of luck?
Kind of, unless the door closes first then car jack mode will trigger: ruclips.net/video/FMYfUsORMvU/видео.htmlsi=pitww1mIPh5GztN_
So which one do I order? I kinda got confused a little
It’s one device - The Tazer.
There are multiple Tazer’s for different vehicles. If you have a Charger/Challenger is the Tazer. If that vehicle is 2018 or newer you would also need the double bypass
@@zautomotive thank you for tha clarification
Can I leave my tazer in all the time connected in the bypass?
Yes
@@zautomotive does the tazer go in to a stand by mode when car is parked and not in use?
Can I plug tazer in truck and car lock under dash osb port ?
I assume you mean trunk and OBDii port… and yes, you can plug the Tazer in the trunk using the double bypass while using the OBDii port under the dash for another device ruclips.net/video/__IEW0P4noU/видео.htmlsi=wE4gT8C-gO49g9_6
will this work on all Mopar ? Chrysler 300 as well ?
Yes
@@zautomotive ok thanks
This New feature works on Jeeps Grand Cherokee 2022?
Yes
So does this work with the 2011 to 2014 RT & SRT
Yes, once updated to v2.5.9
Will this work with a manual dodge challenger?
Yes
Sir, do we have to update the Tazer to get the new pedal kill feature?
Yes, but it's currently only available in a beta version which you would need to download directly from the ZPU software. It's not live on our website yet
@@zautomotive Thank you for the fast reply. I only recently added Tazer to my Dodge Challenger and it completely changed my experience with this vehicle- thank you to your team for this.
Should I wait or just update/ download it now Sir?
@@AllegianceBattleGround Since it is still a beta version firmware, there could still be some bugs to work out.
Really comes down to if you want earlier access or a more stable firmware version. We've been getting good reports from those using the beta firmware.
If you do decide to download the beta version firmware, just please relay any issues to our support team - support@zautotech.com.
All firmware details are listed in the description
Sir, thank you for this reply. Do I just update the Tazer and plug it back into The Challenger, make the menu changes, then perform the full reboot?
@@AllegianceBattleGround yes just update and plug back in, but if you already have a pin set from a previous firmware, clear your [in before updating. No reboot is necessary being that these are all live settings