On my 2012 RZR 900 xp4 I had a no start issue. Pulled the line going to the injectors and there was very little fuel flow coming out when cycling the key on and off. So I proceeded to pull the fuel pump from the tank to change it and noticed that the little hard plastic fuel line that runs from the pump up to the white plastic mounting flange was cracked nearly in half in one spot. Removed it using a razor knife and replaced with some submersible rubber fuel line and the RZR is back to running like new.
Can you buy just the end pipe, mine got cracked. It is the pipe that is on top of the pump. I checked and I cannot find one, the only thing is to buy the whole pump. mine is an angle one,
You know what would cause a viton grommet to keep ripping on older model fuel pump assembly? Its the viton grommet that goes over the pump barrel. Ive replaced 2 and they all keep splitting on me and thus causing fuel pressure failure.
The part number may be different for your specific machine but the first link in the description will take you to a page with all the parts and tools used in this video.
took wires off at the solder.. it was took a higher temperature then normal solder. got it done and working . may be easier to splice..
On my 2012 RZR 900 xp4 I had a no start issue. Pulled the line going to the injectors and there was very little fuel flow coming out when cycling the key on and off. So I proceeded to pull the fuel pump from the tank to change it and noticed that the little hard plastic fuel line that runs from the pump up to the white plastic mounting flange was cracked nearly in half in one spot. Removed it using a razor knife and replaced with some submersible rubber fuel line and the RZR is back to running like new.
Nice job on the repair! Thanks for watching!
This is video is excellent, thanks mate. Exactly what I needed having never done this before. Cheers
Can you buy just the end pipe, mine got cracked. It is the pipe that is on top of the pump. I checked and I cannot find one, the only thing is to buy the whole pump. mine is an angle one,
Excellent presentation. Thank you.
You know what would cause a viton grommet to keep ripping on older model fuel pump assembly? Its the viton grommet that goes over the pump barrel. Ive replaced 2 and they all keep splitting on me and thus causing fuel pressure failure.
Es igual la de los rzr y ranger?
New assembly worked great, but i canned the new sender nut and used the old. New one is terrible.
Can I get the number of the fuel kit
The part number may be different for your specific machine but the first link in the description will take you to a page with all the parts and tools used in this video.
Français
Jocelyn Hetu Bombardier merde!