Mesa Tactical Urbino Tactical Stock Update

Поделиться
HTML-код
  • Опубликовано: 6 янв 2025

Комментарии • 89

  • @e7tegt503
    @e7tegt503 Год назад +4

    Thank you for this. I'm over 6' and my rifle stocks are 15" LOP.

  • @MM-kv8ly
    @MM-kv8ly 2 года назад +4

    You saved me some money, thank you! I'm going to chop an inch off the standard Benelli pistol grip stock. The 14 1/4" lop is too long unless you are over 6' tall. This will require a hand made bracket to accept a standard pad with two screws.

  • @weduhpeople8504
    @weduhpeople8504 Год назад +2

    With the crom rmr mount the Holosun 507c cowitness and the standard stock cheek wield lined up perfectly.

    • @PrecisionTKS
      @PrecisionTKS  Год назад

      Thanks for the info. I wasn't aware of that

  • @josephramieri2256
    @josephramieri2256 Год назад +4

    I have the same problem with the Urbino Mesa Tactical stock. The rubber sleeve came off the grip at the range today while shooting slugs with heavy recoil.
    I smeared the inside of the sleeve with JB Weld epoxy and replaced it. We'll see how this works but otherwise... I'll just put my stock stock back although the length of pull is a pia!

    • @PrecisionTKS
      @PrecisionTKS  Год назад

      I'm glad I'm not the only one!

    • @Urbicide
      @Urbicide Год назад +2

      You might try a dab of Shoe Goo. I recently tried some on a shoe, of all things, & the was very impressed with the way it bonded with the rubber sole. It is inexpensive & readily available in Walmart's shoe department by the shoelaces.

  • @josephramieri2256
    @josephramieri2256 Год назад +1

    The epoxy seems to have worked very well. I have not taken the gun to the range yet but I cannot pull the sleeve off of the grip.

  • @general0194
    @general0194 Год назад +1

    I'm torn between the Benelli M4 with 100 dollars and the mesa Tactical, but my concern with the standard Benelli is whether the stock will accommodate the cheek sling? Because I have the stock without a pistol grip And it doesn't fit my sling

    • @PrecisionTKS
      @PrecisionTKS  Год назад +1

      I don't believe the standard stock will work with a cheek sling.

  • @contention100
    @contention100 9 месяцев назад +2

    No problem with mine on a 1301 so far and the LOP is just right. I'm 6 ft. but I have a HS -510c on a QD riser. Not into the co-witness thing.

  • @Omnivorous1One
    @Omnivorous1One 2 года назад +1

    You think putting a pin through the grip would aid in the plastic grip not moving?
    I need a shorter lop as I am a shorter person & there isnt much to choose from for a shorter lop stock. The C-stock isnt an option where I live

    • @PrecisionTKS
      @PrecisionTKS  2 года назад

      I don't see why a pin or some appropriate adhesive wouldn't work at all. I just didn't want to modify mine.

  • @locoparentis244
    @locoparentis244 Год назад +1

    do you have a video about the optic and cowitness with the ghost ring sight?

    • @PrecisionTKS
      @PrecisionTKS  Год назад +1

      The closest that I would have right now would be the video of mounting the SRO on thr Scalarworks rail.

    • @locoparentis244
      @locoparentis244 Год назад

      @@PrecisionTKS Watched it, thanks that was perfect. Looks like the SRO and the Scalarworks rail are designed for plug and play cowitness. I just installed a pic rail, and it's definitely taller than the Scalarworks rail you show.

  • @BrandensOutdoorChannel
    @BrandensOutdoorChannel 2 года назад +4

    the tactical stocks were designed for LE use because officers wear body armor

    • @PrecisionTKS
      @PrecisionTKS  2 года назад +1

      I'd think it was more for military personnel before LE, but definitely for the use of body armor.

  • @elcontrastador
    @elcontrastador Год назад +1

    Thanks for the review…good points

  • @MD-mm1zv
    @MD-mm1zv 2 года назад +1

    Personally, the standard tactical Benelli stock is good for me.
    The only issue is the sling point.
    It's just too narrow to thread a 1-inch Vickers or Magpul through it.
    Not interested in changing stocks or mounting a QD socket to it.
    Any good slings out there about 1/8-inch narrower to use?

    • @PrecisionTKS
      @PrecisionTKS  2 года назад

      I honestly couldn't say whether there is a better sling option out there. I know Q has a pretty interesting sling mounting solution, but I've never tried it myself and I'm not sure if it would work on the M4 or not.

    • @SimonDuLac
      @SimonDuLac Год назад

      Let us know what direction you end ups going sir, thanks again

    • @matthew_b0592
      @matthew_b0592 Год назад +1

      I went with the Blue Force Gear molded UWL. I’d still be interested in trying the Q mounting option.

    • @PrecisionTKS
      @PrecisionTKS  Год назад

      I'm a fan of Blue Force Gear myself. I'm glad you found something that sounds like it worked.

    • @Rb889
      @Rb889 Год назад +1

      Proctor WOTG sling should work, they're $30 and super simple, but they don't have the quick adjustment of newer slings. The paracord adapters aren't needed, but can be useful, depending on how you're mounting them. I just found out myself that an MS1 won't fit through the factory sling loop on the stock.

  • @thebloodofelias
    @thebloodofelias 11 месяцев назад +1

    Cant you just put a different grip on it ? looks like it would be able to use any beaver tail grip

    • @PrecisionTKS
      @PrecisionTKS  11 месяцев назад

      Not on this one. The grip is molded into the frame and there is a rubber "cover" essentially that slips over the frame/handle.

  • @russi1743
    @russi1743 10 месяцев назад +1

    Does anyone know if this stock is compatible with turkish clones like panzer m4?

    • @PrecisionTKS
      @PrecisionTKS  10 месяцев назад

      It shipped be, but if not, I believe Panzer actually makes clones of this stock as well.

    • @russi1743
      @russi1743 10 месяцев назад +1

      @@PrecisionTKS thanks

    • @Bobbylee1963
      @Bobbylee1963 8 месяцев назад

      @@russi1743 Yes

  • @JoeFootball55
    @JoeFootball55 2 года назад +1

    Thanks for the update. I'm also in the market for a collapsible stock. Let us know what you find. The one's I've seen are priced way to high.

    • @PrecisionTKS
      @PrecisionTKS  2 года назад

      Absolutely will do!

    • @donlarocque5157
      @donlarocque5157 2 года назад +1

      I bought a collapsible stock by Knoxx. Blackhawk was marketing them for Walmart. 870 Rem or 500 mossberg only at Walmart. Back when they carried it. $80. W/forend.

    • @padraigsheridan8316
      @padraigsheridan8316 2 года назад +1

      I bought one from a turknelli for under $100 canadian. it works but a bit short for me.

  • @Murchlives
    @Murchlives 2 года назад +1

    Just got me an Urbino, and it's the perfect LOP for me (I'm about 5'9") to hold it squared up with it. I have an OEM pistol grip stock I can let go for $50+shipping, if you want.
    I do wish Magpul would make something for it.

    • @PrecisionTKS
      @PrecisionTKS  2 года назад +1

      I'm sure Magpul would knock it out of the park if they had a design for one.

    • @padraigsheridan8316
      @padraigsheridan8316 2 года назад

      Would you recommend this for someone 6'? I've long alien arms and I'm having trouble finding the right stock.

    • @PrecisionTKS
      @PrecisionTKS  2 года назад

      Personally, I would not. My arms are fairly short relatively speaking and it's a fairly short stock for myself

    • @padraigsheridan8316
      @padraigsheridan8316 2 года назад +1

      @@PrecisionTKS thanks for replying 👍. Great channel, I'm freshly subscribed. Well the search continues for the long alien 👽 arm stock.

  • @mattmeir1246
    @mattmeir1246 8 месяцев назад +1

    Can you use that stock on Benelli shotgun knockoffs?!

    • @PrecisionTKS
      @PrecisionTKS  8 месяцев назад +1

      Probably, but I'm not sure. I don't have a knockoff to test it on myself.

    • @mattmeir1246
      @mattmeir1246 8 месяцев назад +1

      @@PrecisionTKS thank you for the response. I'm going to take a chance

    • @Bobbylee1963
      @Bobbylee1963 8 месяцев назад +1

      Yes they fit the Panzer M4 nice!

  • @jamesm1297
    @jamesm1297 2 года назад +1

    Any issues with the charging handle up to this point?

    • @PrecisionTKS
      @PrecisionTKS  2 года назад +1

      None at all. I absolutely love it.

  • @dylanhayden8825
    @dylanhayden8825 2 года назад +1

    Does the cheek riser work for left hand shooters?

    • @PrecisionTKS
      @PrecisionTKS  2 года назад +1

      Yep. The stock itself and the cheek riser are symmetrical. The sling plate can be rotated from one side to the other during installation.

    • @dylanhayden8825
      @dylanhayden8825 2 года назад +1

      Thanks! All the stock pics tend to show just one side.

    • @PrecisionTKS
      @PrecisionTKS  2 года назад

      @@dylanhayden8825 no problem at all! Glad I could help.

  • @CaptDestro
    @CaptDestro Год назад +1

    Apparently the Benelli grip fits the mesa

    • @PrecisionTKS
      @PrecisionTKS  Год назад

      Good to know! I wasn't aware of that

  • @josephramieri2256
    @josephramieri2256 2 года назад +1

    Why not take the rubber off the pistol grip, apply some "Superglue" and reinstall.

    • @PrecisionTKS
      @PrecisionTKS  2 года назад

      That's always an option. I chose not to run with this particular stock though for several other reasons.

  • @demetriharlan5887
    @demetriharlan5887 5 месяцев назад +3

    Put one my 930, no problems.

  • @weekendwarrior8334
    @weekendwarrior8334 2 года назад +2

    Interesting…I have the OEM pistol grip stock. I plan on replacing it because the LOP is too long for me.

    • @PrecisionTKS
      @PrecisionTKS  2 года назад

      What is your actual LOP? Mine is around 14.5" I believe

    • @weekendwarrior8334
      @weekendwarrior8334 2 года назад +1

      @@PrecisionTKS Actual LOP measured from trigger to end of stock is 14.5. Just not a comfortable setup for me.

    • @PrecisionTKS
      @PrecisionTKS  2 года назад +1

      @@weekendwarrior8334 gotcha. That'd probably be almost perfect for me other than the cheek weld problem. The Mesa is right around 13.5", sonit may work well for you

    • @weekendwarrior8334
      @weekendwarrior8334 2 года назад +1

      @@PrecisionTKS Apprexiate the info!

    • @weekendwarrior8334
      @weekendwarrior8334 2 года назад +2

      @@PrecisionTKS Just got my Urbino stock…..the LOP Is good to go for me. After couple hundred rounds the grip hasn’t moved. How has that Streamlight held up for you?

  • @AZTrigger
    @AZTrigger Год назад +1

    Pull the grip off and squirt some shoe glue down the grip and put it back on. It will not come off again.

  • @thedumbguncollector5546
    @thedumbguncollector5546 2 года назад +1

    Good info. I am short af so that would probably be good for me. I prefer straight stocks though and actually just hacked down mine. Crazy amounts of hassle to hack off 1.5 inches. Lol. Other than that and the charging handle mine is set up like yours.

    • @PrecisionTKS
      @PrecisionTKS  2 года назад

      Yeah, I've cut down a stock before. I don't know that I will ever want to do it again "to save some money". it's a lot more cost effective to just buy one rather than spend the time and money to buy the materials to do it yourself. I love that charging handle also. it made a HUGE difference in the ergonomics.

    • @zoolande-roblox-gaming9877
      @zoolande-roblox-gaming9877 4 месяца назад +1

      @@PrecisionTKS where is your charging handle from?

    • @PrecisionTKS
      @PrecisionTKS  4 месяца назад +1

      @zoolande-roblox-gaming9877 it's a GG&G, but I can't remember where I got it from exactly. Super easy install and very comfortable. I highly recommend the upgrade

  • @tyolisethongru1488
    @tyolisethongru1488 2 года назад +1

    Can I buy this shotgun,I like it so much,I lm from Nagaland (India) n may I know the actual price please

    • @PrecisionTKS
      @PrecisionTKS  2 года назад

      I'm not sure what your local laws are regarding firearm ownership, but I'm sure you could verify and pick one up if it is legal to do so. I'm also not sure about your local currency or prices, but it was right around $2,000 for me in the US, plus the cost of the accessories.

  • @qwertyuio905
    @qwertyuio905 4 месяца назад +2

    put this stock on an a300 ultimate patrol.
    It's built like a tank, the lop is fine for me, the cheek weld is perfect (got the riser) .
    The annoying part is the noch created between the back of the grip and the stock. It too Damm narrow. While shooting, it's fine, but any manipulation of the gun you might want to do is a no-go because your hand can't rotate around the grip. With no gloves on. To me
    That's the (olny) reason I don't like it.

    • @PrecisionTKS
      @PrecisionTKS  4 месяца назад

      Makes sense. Different body types will fit the same stock differently. How does it work with gloves?

  • @kingpin7673
    @kingpin7673 2 года назад +1

    nice

  • @josephschmoe3796
    @josephschmoe3796 2 года назад +2

    Keep us posted.

  • @stewpadaso436
    @stewpadaso436 9 месяцев назад +1

    🤣🤣🤣🤣🤣🤣! Man

  • @chopshopchopper
    @chopshopchopper 2 года назад +1

    Get a wood stock...

    • @PrecisionTKS
      @PrecisionTKS  2 года назад

      Okey dokey

    • @Rb889
      @Rb889 Год назад

      From where? Only ones I've seen for the M4 were a one-off custom, and the set included on the Black Aces S4, and Black Aces isn't importing the furniture for individual sale.

  • @curtisdowling3773
    @curtisdowling3773 Год назад

    I will sell you an mossberg original pistol grip stock for $100 !!!