Sorry bud and now I got the pistol grip stock on it, I made a video yesterday with the Mesa tactical stock, but you’ll get there, I bought a part every paycheck, it’s been about 9 months since I bought it , but now it’s finally done
Thank you for going through it and showing (/!: naming) the parts. I was looking up A300 but didn’t know the stock would fit. Do you have a video or changing the stock?
Just watched your previous A300 stock install, looks like you added over $1K (?) in goodies (GG&G) to make look awesome, congrats. Was this the only stock upgrade you considered?
@@donculver8671 this is the only aftermarket stock available for the a300 as of right now chisel machining is coming out with one soon, yes is this video I believe I had the Gg&g handguard and heatshield that was 300, the tube cover was 75, the Aridus follower which you can’t see was 60, the Holosun was 350, the stock was 130, charging handle was 40, handstop was 25, buttstock shell holder was 40, flashlight was 120, so ya over a 1000$, but obviously not everyone needs all these things, but the tube cover is a big upgrade, and the stock I like pistol grips so I chose this stock
Man we need an install video. Some people been complaining about the stock rotating after shooting it. Don’t know if is an error on the installer or the Mesa Stock just not meant for the a300. Still on the fence in getting one.
I haven’t shot it with the stock on it yet so I’ll have to wait and see but I tightened the hell out of it it feels sturdy enough but time will tell, I could record me putting it back on
Would you say this stock is worth it for the price? Does it change the felt recoil now that you have a pistol grip with stock combo vs the traditional stock? And if I do get this, should I get the riser? Can you do some range footage with this set up? I want to see if the recoil different is worth it
I think the pistol grip is better for heavier loads and easier with the push pull method for sure, I didn’t need the riser with the GG&G RMR mount and Holoson 507c, maybe if you put a red dot on the pic rail you would need the riser
I have not I just put it on yesterday and I knew there was not a video on RUclips yet, guess I’m the first, I’m assuming it will perform just as well on the 300 as the 1301, this stock is just a 1301 stock with a different sling washer in it
@@baowzer6430 might be awhile a guy at my job just quit I’ve been working 7 days a week and I got 4 kids so not much time to shoot but if I do I’ll send a message
The kick off system is a spring loaded buttstock system if I’m not mistaken, I have not shot it with this stock on it yet, but I did have a limbsaver pad on the original beretta stock, it was very nice but slugs and heavy brass shells I could still feel, I do not have any experience with the kick off system so I can’t compare the two
I just installed mine and was disappointed that there are no anti rotation pins.. i feel like if i dropped this the grip could potentially rotate. What are your thoights?
@@iboxirun I had the older version of the a300 the newer version comes with the same charging handle as the 1301 now, which isn’t bad but the GG&G one is way better
With the shells I’d say another pound, the shotgun is 7 pounds stock, so with all my modifications and fully loaded it’s probably in the 11-12 pound range
No adaptor needed the 1301 and the a300 receiver have the same profile on the back so it fits very nice, the stock comes with 2 sling plates for the middle of the stock if you choose to use them one with a big hole for the 300 and one for the 1301, the install was 5 minutes
@@stacymiller2733 no problem, I just installed it today haven’t shot it yet, it took almost 2 weeks to get to Minnesota from Nevada, so hopefully you’ll get yours faster, oh I forgot to mention in my video that with the Holoson optic there is no need to get the urbino stock with the riser unless you mount an optic on the pic rail , the way I have my setup with no riser and holoson with the low RMR mount works out well
I thought it wasn't possible to change the stock on the A300UP because of the recoil system that's contained within factory stock. Too bad you didn't take shots of the installation process.
The urbino stock is set up for the 300, the mossberg 930 has the same type of recoil system, so Mesa tactical just tweaked it a bit for the 300, it was extremely simple to install, remove buttpad off of the beretta stock remove bolt, reverse process with the urbino stock , it took me about 4 minutes, so if you do order it from Mesa tactical it’s under the 1301 beretta link
One thing I noticed about this pistol grip stock and now even the pistol grip stock of the 1301/1301 Mod.2 is the pretty extreme angle of the pistol grip. It's way more extreme than that of the Glock pistols compared to the "standard 1911" grip angle and I think a little more angled than the pistol grip stock of the Benelli M's. Is it uncomfortable to shoot?
@@markn4526 the grip on this stock is modeled after the benelli grip they can actually interchange with each other, feels very good in the hand, doesn’t feel unnatural to hold with the angle of the grip, I have not shot the gun with this stock yet, but this stock is the only option besides the stock that came with the A300UP
No super easy, took off buttpad off of beretta stock take off 1/2” nut, grab mess tactical stock, the a300 has about a 10” rod attached to receiver so you feed that through the sling mount if you want to use it, than tighten the original beretta nut back onto the urbino stock with the supplied washers it took me 5 minutes
@Timcanniff311 have you shot it with that stock on it yet? If so how was it in comparison? Thanks for the info on all this bro you're taking the journey with this shotgun and alot of us dudes are taking notes lol
@@Ohyouknowbro yes I have a short video with shooting it, actually the video I have is where the Zhukov handguard broke, my stock didn’t rotate at all like others have mentioned
@@Aeron-m8d I don’t know how to link stuff I’m not a computer guy, but it’s from Mesa tactical, it’s called the Urbino stock, and it can be found under the beretta 1301 stock link
You have the A300 “ultimate” patrol!!! Literally daydreamed of that exact setup, but you beat me to the punch!
Sorry bud and now I got the pistol grip stock on it, I made a video yesterday with the Mesa tactical stock, but you’ll get there, I bought a part every paycheck, it’s been about 9 months since I bought it , but now it’s finally done
Thanks Tim, paused your video about 20 seconds in and zipped over to MT and picked one up! Absolutely beautiful rig you got there.
Thanks bud, I think I’ve bought everything thing that exists for it besides the CROM mount, it’s as tactical as it’s gonna get!
Thank you for going through it and showing (/!: naming) the parts. I was looking up A300 but didn’t know the stock would fit. Do you have a video or changing the stock?
@@m.k.a3590 yes it’s on my channel
Just watched your previous A300 stock install, looks like you added over $1K (?) in goodies (GG&G) to make look awesome, congrats. Was this the only stock upgrade you considered?
@@donculver8671 this is the only aftermarket stock available for the a300 as of right now chisel machining is coming out with one soon, yes is this video I believe I had the Gg&g handguard and heatshield that was 300, the tube cover was 75, the Aridus follower which you can’t see was 60, the Holosun was 350, the stock was 130, charging handle was 40, handstop was 25, buttstock shell holder was 40, flashlight was 120, so ya over a 1000$, but obviously not everyone needs all these things, but the tube cover is a big upgrade, and the stock I like pistol grips so I chose this stock
Oh ya and the pro lifter that was 150$
Man we need an install video. Some people been complaining about the stock rotating after shooting it. Don’t know if is an error on the installer or the Mesa Stock just not meant for the a300.
Still on the fence in getting one.
I haven’t shot it with the stock on it yet so I’ll have to wait and see but I tightened the hell out of it it feels sturdy enough but time will tell, I could record me putting it back on
Made an install video for ya
@@Timcanniff311Thank you I believe you are the first one to make one.
Thank you.
@@jorgenoneya5382 it’s possible I haven’t even seen another video with the stock on it like mine
Would you say this stock is worth it for the price? Does it change the felt recoil now that you have a pistol grip with stock combo vs the traditional stock? And if I do get this, should I get the riser?
Can you do some range footage with this set up? I want to see if the recoil different is worth it
I think the pistol grip is better for heavier loads and easier with the push pull method for sure, I didn’t need the riser with the GG&G RMR mount and Holoson 507c, maybe if you put a red dot on the pic rail you would need the riser
exactly the video i was looking for! I couldn't find info anywhere. Have you fired it with the stock on yet?
I have not I just put it on yesterday and I knew there was not a video on RUclips yet, guess I’m the first, I’m assuming it will perform just as well on the 300 as the 1301, this stock is just a 1301 stock with a different sling washer in it
@@Timcanniff311 Let us know how it goes when you shoot it please
@@baowzer6430 might be awhile a guy at my job just quit I’ve been working 7 days a week and I got 4 kids so not much time to shoot but if I do I’ll send a message
How is the recoil on it now with the MT butt stock and limb saver? I just got one and debating if I should get the kick off system or this.
The kick off system is a spring loaded buttstock system if I’m not mistaken, I have not shot it with this stock on it yet, but I did have a limbsaver pad on the original beretta stock, it was very nice but slugs and heavy brass shells I could still feel, I do not have any experience with the kick off system so I can’t compare the two
Is the GG&G RMR mount the one that’s listed for the 1301 on their site?
@@frenzy2223 it will fit both the 300 and the 1301 but there is a dedicated page for a300 products on their site
@@Timcanniff311 thank you, I had to go to the desktop version for it to work right.
@@frenzy2223 ya I forgot to mention that their mobile is crap
I just installed mine and was disappointed that there are no anti rotation pins.. i feel like if i dropped this the grip could potentially rotate. What are your thoights?
It does have the oval shaped washer towards the nut mounting in the back but I haven’t had any rotation issues yet
How do you like the charging handle?
@@iboxirun way better than the stock one great upgrade in my opinion
@@Timcanniff311 copy that. Bought mine today. Thanks.
@@iboxirun I had the older version of the a300 the newer version comes with the same charging handle as the 1301 now, which isn’t bad but the GG&G one is way better
❤what is the difference between a300 ultima and rhe ultima parrol
The patrol is a tactical version of the Ultima
Thanks for sharing this
@@mikekorner here to help
How much weight did this add
With the shells I’d say another pound, the shotgun is 7 pounds stock, so with all my modifications and fully loaded it’s probably in the 11-12 pound range
Did you have to buy an adapter separately or did it come with the buttstock?
No adaptor needed the 1301 and the a300 receiver have the same profile on the back so it fits very nice, the stock comes with 2 sling plates for the middle of the stock if you choose to use them one with a big hole for the 300 and one for the 1301, the install was 5 minutes
Guess this will be my next purchase … good info thanks
@@stacymiller2733 no problem, I just installed it today haven’t shot it yet, it took almost 2 weeks to get to Minnesota from Nevada, so hopefully you’ll get yours faster, oh I forgot to mention in my video that with the Holoson optic there is no need to get the urbino stock with the riser unless you mount an optic on the pic rail , the way I have my setup with no riser and holoson with the low RMR mount works out well
I thought it wasn't possible to change the stock on the A300UP because of the recoil system that's contained within factory stock. Too bad you didn't take shots of the installation process.
The urbino stock is set up for the 300, the mossberg 930 has the same type of recoil system, so Mesa tactical just tweaked it a bit for the 300, it was extremely simple to install, remove buttpad off of the beretta stock remove bolt, reverse process with the urbino stock , it took me about 4 minutes, so if you do order it from Mesa tactical it’s under the 1301 beretta link
I thought the same thing until I came across Tim's video just now. Absolutely bad ass!
@@f34dave I recall watching a video with a representative from Beretta saying that because of the recoil system.
One thing I noticed about this pistol grip stock and now even the pistol grip stock of the 1301/1301 Mod.2 is the pretty extreme angle of the pistol grip. It's way more extreme than that of the Glock pistols compared to the "standard 1911" grip angle and I think a little more angled than the pistol grip stock of the Benelli M's. Is it uncomfortable to shoot?
@@markn4526 the grip on this stock is modeled after the benelli grip they can actually interchange with each other, feels very good in the hand, doesn’t feel unnatural to hold with the angle of the grip, I have not shot the gun with this stock yet, but this stock is the only option besides the stock that came with the A300UP
So you can put a different stock on the a300. Ok now I’m sold
@@firstimeshooter6590 as of right now the Mesa tactical urbino is the only option so far chisel machining will be coming out with one soon as well
@@Timcanniff311 awesome thank you. I’ll check chisel machine out aswell. 🤙
It looks awesome
Thanks bud
Was it hard to install?
No super easy, took off buttpad off of beretta stock take off 1/2” nut, grab mess tactical stock, the a300 has about a 10” rod attached to receiver so you feed that through the sling mount if you want to use it, than tighten the original beretta nut back onto the urbino stock with the supplied washers it took me 5 minutes
@Timcanniff311 have you shot it with that stock on it yet? If so how was it in comparison? Thanks for the info on all this bro you're taking the journey with this shotgun and alot of us dudes are taking notes lol
@@Ohyouknowbro yes I have a short video with shooting it, actually the video I have is where the Zhukov handguard broke, my stock didn’t rotate at all like others have mentioned
Good lookn shottie u have there sir 👍🏿👍🏿
Thanks hero
Wait for range test💪
Ya hopefully soon I got lots of kids and work a lot do t shoot too much
@@Timcanniff311 Can you share pistol grip purchase links
@@Aeron-m8d I don’t know how to link stuff I’m not a computer guy, but it’s from Mesa tactical, it’s called the Urbino stock, and it can be found under the beretta 1301 stock link
It's tacticool for sure
I have a few traditional shotguns so I want to go all out tactical with this one, it’s as tactical as it’s gonna get!
I don't care for the pistol grip stock.
The pistol grip stock doesn’t care for you, either.
I love the pistol grip, I wouldn't have it any other way. Different strokes for different folks.