Видео

@@AlternativeEnergyNC yes it does

@@m.k.a3590 yes it’s on my channel

@@frenzy2223 it will fit both the 300 and the 1301 but there is a dedicated page for a300 products on their site

@@Timcanniff311 thank you, I had to go to the desktop version for it to work right.

@@frenzy2223 ya I forgot to mention that their mobile is crap

@@eamonnmayfield1732 at least double

@@iboxirun way better than the stock one great upgrade in my opinion

@@Timcanniff311 copy that. Bought mine today. Thanks.

@@iboxirun I had the older version of the a300 the newer version comes with the same charging handle as the 1301 now, which isn’t bad but the GG&G one is way better

@@christophergarcia1027 I just wanted to try the Magpul but I switched back to the Mesa tactical, the nylock nut plus red loctite hold the urbino on well, I wasn’t a fan of the Magpul versus the pistol grip

@@bartcasto2240 briley handguard, and it’s very functional

@@firstimeshooter6590 as of right now the Mesa tactical urbino is the only option so far chisel machining will be coming out with one soon as well

@@Timcanniff311 awesome thank you. I’ll check chisel machine out aswell. 🤙

@@side_quest no problem bud

@@jc51373 maybe beretta says that because it’s a aftermarket stock, but the issue on this gun and my 1301 is that it rotates, with red loctite it was better

@@Timcanniff311 ahhhh so it moves? They put that stock on the 1301 from the factory I think

@@jc51373 yes you are correct, but it still moves

@@Timcanniff311 What moves on the urbino and how much?

@@steveyo-m4k if the nut in the stock is not tightened enough, it will rotate, I saw a video on Reddit where the stock was rotating about a quarter inch, what I did was get a new nylock nut and red loctite and it’s been solid, oh and I tightened the piss out of it

@@samduffy7628 thanks bud I have a problem saying it’s done than keep going, maybe a new charging handle and a Rudy’s bolt release, shit I got close to 3000 into this thing already

@@emrecataloluk79 no I didn’t have any issues on mine when I put it on, maybe the casting on your piece was a little off or thicker. It’s possible I imagine, my Zhukov broke and I returned it and got the briley handguard

@@JohnDoe-zg6fn I agree the aridus is better but I blew my wad on outfitting this beast so I’ll have to wait on the Aridus, I’d have to spend 230 for the sidesaddle and an extra spare so it will eventually happen

@Timcanniff311 Fair enough. Us Benelli guys got it worse. We have to change out magtube which sucks. You Beretta guys get it already with it. Still think Benelli is better though lol. Thanks for the videos!

@@JohnDoe-zg6fn they are both the best shotguns on earth, my only thing with the 1301 is they should make every part metal like the m4, plus beretta owns benelli so us both are giving money to beretta!

@@markej4801 yes it should I would imagine beretta will offer it like they do with the 1301, than charge 200 more dollars!

@@JohnDoe-zg6fn the only thing I can think of is for grip is why they didn’t cut out those slots, as they are textured, I agree Briley is the way to go

@@scottdorsey9350 when I talked to GG&G they told me the ring inside broke because I had a flashlight mounted on the m-lok slot, but that’s what they are there for us to mount stuff, that’s why I got the briley, and if you don’t want to spend 50$ on a match saver from Briley, Oscar Delta company has a m-lok match saver shipped to my door for 24$ and I’ve had no issues with it, that’s what I used anyway, hope this helped, I have a 1301 now and the match ever is in that video I just put that video out yesterday

@@Timcanniff311 thanks for the info, did the ring break while firing the weapon? Also, thanks for the match saver advice, did that one come with the m-lok hardware to mount? I’m definitely going with the Briley, have not seen one negative feedback about it other than price….but to your point, you get what you pay for

@@scottdorsey9350 yes the handguard broke when I fired a slug and the bolt would not go into battery, when the ring broke is dislodged the snap ring on the gas piston, and yes the Oscar delta comes with hardware

@@Timcanniff311 thanks! I’m glad I viewed your post before making a big mistake with the GG&G purchase. One last question, I’m getting an Olight Odin….how does the pressure switch mount, m-lok?

@@scottdorsey9350 no it has a pic rail mount but I used a Magpul m-lok tape switch mount, watch my 1301 video and you’ll see it on the briley, it works well holds it good, I got the Magpul mount off amazon like 14$ I had to trim the end of the olight switch with a scissors and take a circular file and file down the U channel in the mount itself, took me about 3 minutes to get it to fit

@@mikekorner here to help

@@GiantSlayer-rr1vu well you already got the 1301, that’s most of the cost, the Magpul stock and adapter from gg&g was 176$ shipped, the sig Romeo was 125$ off Amazon, the handguard from Briley was 370$ shipped, the Olight Odin mini was 149$ off Amazon, strike industries mini handstop was 25$ shipped, Magpul tape switch was 14$ off Amazon, the BCM QD up front was 30$ off Amazon, and the QD cup in the stock from magpul was 15$ off Amazon, the match saver is a Oscar Delta company was 25$ shipped, the tube cover is a gg&g was 70$ shipped, I think that covers everything! So I’ve spent roughy over 900$ in accessories for this beast

@@GiantSlayer-rr1vu I also forgot I have the aridus follower which was I think 60$ but that’s not needed I just had it in my a300 and transferred it to my 1301

@@Brrr410lbc I got this 1301 for 1475$ my good friend is a FFL dealer so it was hard to pass it up, this color typically sells for 1899, plus tax and shipping so over 2000$ to your home, plus it is a better shotgun

Trader 😂😂 love my A300 but ya that's a great deal on Odg and very impressive that briley hooked you up I need that handguard still for my a300

@@ninjascout468 I loved the 300 as well, but hard to pass on a deal like this!

Killer deal. Great gun.

@@brunoh2871 ya I’m loving it so far have a great night bud

@@Jmp64-ns8zl so the spacer towards the receiver on the 7 round tube is removable and on the 5 shot tube you’re saying it doesn’t come off, is that correct, I’ve never seen a shorter tube version of the a300. If it’s able to be dremeled off do it, the briley is much better, me personally I am not afraid to modify stuff to make things work, and sometimes aftermarket parts not just guns parts need modifications to work, wonder why beretta would make a different part for the same gun, wish you could send pics through RUclips . Do you use Reddit? You could put it on tacticalshotguns subreddit and I could look at it

@@Jmp64-ns8zl can’t find a video of a compliant model a300 disassembly, the tube that connect to the bolt itself is that what you are referring to

@@Timcanniff311 The spacer the abuts the original handguard is the same, but they then molded it at the bottom to a polymer tube the runs forward to the spring. That tube is the issue. And I am afraid to cut it, if there are then going to be more issues. I'm really surprised that Briley did not know for sure. Tried reddit, wouldn't let me post. Not to good with tech though. Appreciate your time.

@@Jmp64-ns8zl did you create a account on Reddit? I’d like to try to help but it’s tough without pictures

@@Timcanniff311 I was able to get the barrel off and remove that lower sleeve in the process. However, when I slid the Briley on, it was nowhere near flush with the receiver. The upper part of the Briley flared about a 1/4 inch on each side. Plus there's a lot of movement in the handguard, just cannot tighten it enough. I will try reddit again.

@@Jmp64-ns8zl yes specter gear I used the ring on the shell holder versus what’s on the stock to mount the sling, and it is tight doesn’t move on the stock

@@Jmp64-ns8zl maybe the guy just said that because he never tried it on this particular stock, the 5 shot is made specifically for a hogue stock

@@kinddave27 do you mean how much I spent on this setup?

No an over/under shotgun

For them flying drones

@@kinddave27 I don’t have an over/under but the semi auto would still take down drones if I miss, and with speedy shots

@@Timcanniff311 I been wanted to get a 590s tactical

@@charlesvito1393 all the parts list is in the description

@@charlesvito1393 if there is a certain piece that you are wondering about let me know I can tell you where I got it

@@Timcanniff311 the optic and the shellholder for the stock.

@@charlesvito1393 the optic is a Holosun 507c gr x2, got it off Amazon, the shell holder is a specter gear hogue stock 5 shell caddy of of their own site spectergear .com

@@Timcanniff311 what about the thing that you put on the receiver, I'm a South pole, does it matter?

@@Jmp64-ns8zl the tube cover on the 7 round tube holds the briley on

@@donculver8671 this is the only aftermarket stock available for the a300 as of right now chisel machining is coming out with one soon, yes is this video I believe I had the Gg&g handguard and heatshield that was 300, the tube cover was 75, the Aridus follower which you can’t see was 60, the Holosun was 350, the stock was 130, charging handle was 40, handstop was 25, buttstock shell holder was 40, flashlight was 120, so ya over a 1000$, but obviously not everyone needs all these things, but the tube cover is a big upgrade, and the stock I like pistol grips so I chose this stock

Oh ya and the pro lifter that was 150$

@@donculver8671 I think the Mesa tactical stock without the riser was perfect for me with iron and the Holosun that is on it, now if you buy this stock you need to choose if you want the riser or not first, you can’t add the riser to the stock if you get the one I have on the 300, I learned that the hard way, yes there is about a 1/16 of an inch from the back of the trigger guard and the stock

@@Jmp64-ns8zl that I’m not sure of probably have to look up laws Illinois is ridiculous with gun laws

@@Timcanniff311Ridiculous isn't even the right word for it. It's beyond absurd these days. Cheers!

@@odysseykatewwdb yes, I put a rubber cap in it that was on the bottom of the stock, I had mounted a QD cup on both sides of the stock and just plugged the one I was not using

@@Timcanniff311 How did you mount a QD cup on the side? Did you need to buy specific parts and drill a hole?

@@odysseykatewwdb I got it from grovetec off Amazon, there is another company that makes one called noveske but that one broke so I’m not suggesting that one, just search grovetec qd cup , you drill a 1/2 inch hole and it has a nut on the backside to mount it. Fairly easy, you must have a hollow stock for this option

@@Timcanniff311 Thanks!

@@odysseykatewwdb your welcome happy to help if you got anymore questions feel free to ask I’ve done lots of research on this gun

@@CH-XC2011 it goes about a half inch higher than the barrel and the sides are at a 45° angle and there is about a 3/4 gap between the sides down the center, so you can use a C grip and not burn yourself

@@Timcanniff311 Thank you

@@CH-XC2011 no problem

@@ChrisIsGuapo I have not yet

@@Timcanniff311 oh okay no worries. I’m looking to add it to my a300 too, so I can utilize the additional mlok slots.

@@ChrisIsGuapo there are a lot of them!

@@janman723 mine didn’t, I got a nylock nut from home depot and put red loctite on it, and tightened the piss out of it

@@alexbazan1766 the Briley handguard, it is much better, I have a video on that as well

@@nexus6999 thanks hero

@@draintesm I didn’t have a bad experience with the Gg&g people and the refunded my purchase but I can’t trust their product anymore after it broke right away

@@paul4utica ya I got a completely different handguard now that was just to hold the wiring down

I’ve had no issues with the stock so far, not rotating on me like others have mentioned, I didn’t have luck with the GG&G handguard, but it sure looks awesome, I bet that wrap looks sweet though

@Timcanniff311 good too here on the stock , I needed a way to manage the surefire scout light cable and pressure pad so camo wrap works good , now I'm looking at red dots and wish they had a front tritium sight, I'm not sure how the front sight can be switched over tho , I've seen some list for 1301 and a300 with factory ghost ring sights

@@ninjascout468I have not looked into changing front sights yet, with the green circle I use in the holoson I don’t even notice the fiber optic color, and I got the flashlight on for night anyway, not sure if the front sight on the 300 can be replaced with anything, if so let me know, I’ve bought everything for this gun except that, so might as well spend more money

​@@Timcanniff311hope to chat with ya

I did get a refund so if it happens call them

Did your handguard survive the range trip? I got my briley handguard today I’m not going back to the Zhukov

Dang

@@stacymiller2733 the internal ring in the handguard was made of plastic and it just shattered so I returned it

Mine held up… 75 rounds

The original beretta stock is plastic and so is the Mesa tactical stock, no wood available, maybe it saves a few ounces of weight, but no other options available

The issue is the design of the A300 you can’t use a metal folding styled stock and only GG&g has made a handguard for it out of a Magpul Zhukov handguard and selling it for $180. I have to e Messa stock and can say it’s pretty high quality but it could definitely be heavier duty and i am not a fan of the buttock plate the tab is easy as fu$k to break it feels. We need a aluminum handguard that’s still not too heavy. And a collapsible Benelli M4 style stock

@@joshfisher9684 briley just came out with a metal handguard last Sunday but it’s 350$ and I bought it cause my Zhukov broke

@@joshfisher9684 I’ve pretty much bought every accessory for the 300, I put more into the accessories than the gun

Look bro the future is now lol, whether we like it or not plastic is here to stay

No I have not, hopefully it will be better with the pistol grip

​@@Timcanniff311please keep us posted man, I'm super curious about this too.

@@Ohyouknowbro I did shoot the 300 last week and recoil seems about the same for Urbino for felt recoil but definitely more control with the pistol grip, now I like pistol grips some people dont

​@Timcanniff311 any updates on the stock shifting or recoil thoughts?

I’m a pistol grip fan

In the drop down menu for the Urbino stock you can choose the stock with riser/no riser, or mesa tactical buttpad or limbsaver buttpad

Ya I’m not a RUclips professional, I just use my phone but thanks

Not sure they will drop below 950$, but one heck of a gun for that price, I have a few other videos on the A300 as well

@@Timcanniff311 I've watched your other videos as well, I was just waiting on this one in particular so I can make up my mind if I wanted this or something else. So far I found a quote for 950. Either way its a good price but I got nothing but time right now

@@762x69 I bought mine off gunbroker for 939$ plus shipping and taxes plus FFL fee close to 1100$, but I’ve put more than that into this shotgun, with all accessories I’ve put close to 2500$ into this beast, stock, Holoson, forend, it adds up

I ordered mine 2 weeks ago from Arms Unlimited for $869. Very happy with it.

@@SkybassX that’s a hell of a price, mine was 950$ before taxes and shipping, but I’ve put more than 1500$ into with accessories, beware of the Zhukov handguard from GG&G, I shot my gun the other day and the handguard broke, I have a video on that, but briley has a all metal handguard now I just bought that yesterday but it’s expensive at 350$

Oh ya bud fantastic movie

No problem bud others have asked as well, and you just saw it’s not hard to do, I’m not a professional RUclipsr, I really don’t have all the good angles

Well I definitely appreciate it man! 👍🏻 I've been eyeing that shotgun for awhile now after I seen your first video I bought the stock immediately lol now just waiting for the gun to come 😁

@@LootGhoul12 you will love it, it’s a fantastic shotgun in my opinion, the only issue is I’ve spent more money on accessories than the gun! I’ve put in about 2400$ total into this build!

​@@Timcanniff311So theoretically I could possibly pimp out an A300 patrol for the same price as a bone stock 1301? I'm thinking of buying an A300 myself since 1301 Tacticals up in Canada are about $2050 CAD, whereas the A300 is about $1610 CAD.

@@SamSquids yes you could, if your ok with the handguard on it just keep it on there, gg&g has a decent one but briley in my opinion is the best looking and performing handguard, pro lifter is a fantastic upgrade, if your into pistol grip stocks mesa tactical, and soon chisel machining will be releasing a stock for the 300, good charging handle, but the newer versions of the 300 have the same charging handle as the 1301, metal tube cover if you have the 7 round tube is a good upgrade, and probably the most expensive is the optic, I run just irons on my 1301, I just sold my a300 to a friend cause I got a killer deal on a 1301 mod 2, or I would of just kept the 300

I haven’t shot it with the stock on it yet so I’ll have to wait and see but I tightened the hell out of it it feels sturdy enough but time will tell, I could record me putting it back on

Made an install video for ya

@@Timcanniff311Thank you I believe you are the first one to make one. Thank you.

@@jorgenoneya5382 it’s possible I haven’t even seen another video with the stock on it like mine

It does have the oval shaped washer towards the nut mounting in the back but I haven’t had any rotation issues yet

I have no issues with the GG&G products at all

@@Timcanniff311 Me neither :) I was glad i could even make a LTT variant at all 😀

@@merdicmagic6171 I couldn’t afford the 1301, but the a300UP in my opinion is very close to the 1301, so I made a tactical beast out of it, I have another few other videos on it with the heat shield and pistol grip stock on ot

@@Timcanniff311 Yeah the a300 is surely a good gun. Especially since its not a cucked version like the stock 1301 tactical.

@@merdicmagic6171 I’ve had zero issues with mine and it’s shot every shell I’ve put into it