I Love these HONEST and DESCENT PEOPLE and I like ALL the works they do.They don't take time for a bag of potato, Nacho or hot chocolate. They know the sayings of Agur of The Book of Proverbs.Time is is so precious and irrecoverable.
I've pulled starters apart to see what makes them work. Then I just have smaller pieces to put in the bin. I wouldn't have the patience to rebuild one. Let alone do it for a living. It is amazing how everything is kept going. All these little workshops up and down the streets. Each churning out their own little bit of the puzzle that makes a whole object. And all the kid workers ready to become the next generation.
In Canada, I had to figure all that stuff out on my own without any internet, adult mentors, or money whenever my own stuff broke down and I had to get it up and running wherever it dropped. It's a relief to see it done right, full rebuild, with proper machinery and proper materials.
Мне вот интересно стало,они космический аппарат к луне отправили тоже так же собирали?😅высокотехнологично блин. А вы тут в россии жалуетесь на низкое качество запчастей😂😂😂 вот где качество,вот где нанотехнологии
@@aleks-gq3bt на старых стартерах автоваза башмаки на статоре не надо высверливать - они на витах прикручены - хочешь мучаться бери и делай как этот индус - там даже проще! ты ведь своими словами не автоваз ругаешь а признаёшь что у тебя руки из жопы!!!
Love watching a skilled tradesmen working with an apprentice. Both working with their hands and heads, instead of today's generation sitting on their asses in front of a computer screen, doing mindless redundant sleeping in front of a desktop TV screen. Clicking the keyboard, and not getting their manicured fingers dirty, but still demanding six figure salaries for 3 hours of daily work.
Good job... Rebuilt to be good as new! This was also very educational as it shows the insides of a starter and what's needed to restore it to working condition. I always thought the field coils were round wire, not flat copper strips with insulation in-between to prevent shorts. Your son (?) is a wonderful asset and you are teaching him a trade that he can keep forever. A good father for sure. A++
It is not as good as new. He compromised the reliability in several ways. He removed the rubber waterproof insulator on the electromanetic winding, replacing it with a paper insulator whose insulative dimensions he determined by his eyes; he placed this paper on coil designed to carry hundreds of amps of current. Then to secure this insulative paper in place he wrapped a piece of clothe around the coil, that he then tried to waterproof with paint. You, the original insulator that he burned with a lot of effort, was designed to withstand the high temperatures in the coil. It was impervious to water. We do not know how well or long his paper insulator will withstand the heat generated by the passage of high currents in those windings. And then we do not know how well the cloth and that paint will sustain the same heat resistance. We do not how long that paint will last as the amateur spins in that enclosure. It works when new, but a motor is designed to be durable... What happens if the vehicles starter is placed into passed through water, and has to be started before the starter dries out????
@@DimbweMazala A lot of what you say is true, but rewinding shops used varnish as an insulator for over 100 years. The paper isn't perfect, but I've seen paper insulation on many, many motor windings. It works. Furthermore, he used Gold-Tex Insulation paper. It's impregnated with an insulator so it won't absorb water. They did a fine job IN MY OPINION.
When I had my Angling Boat, there was a small workshop just like this a few miles away. Everyone took their Starter Motors and Alternators to get refurbished and he did a brilliant job. Unfortunately he is retired now. These fellows are just like him, experts at what they do and invaluable. Well done, my respect to you.
Pakistani is the great in all machanical filed. .technical mind and very intelligent skills. .. This person very good working and his work is 100% woranty ...good working good self repairing..very clear dismantling and good fittings. Now see new....that's great.....God bless you brother. . Very very good video I like it. ..
Un ejemplo de como hay que trabajár para vivír en paz y enseñar ha los hijos ha llevár sus vidas ayudando ha los demás y ser buenos ciudadanos.....este es un video maravilloso.
As someone watching from the US • Watching your videos is most relaxing even at 2 x speed. Hope your customers appreciate the skill talent and dedication of your workers for this very important job • It’s good to see how well you understand the design and layouts of the engine starter to get the job done efficiently - loads of experience is evident with this skilled set of workers • Watching your people doing a great job make me think there is hope for the other parts of society who don't even try to have a job. Your crew is a great role model for all of us • Thanks so very much for posting and sharing! All the best and God Bless. 🇺🇸
الله ابارك فيكم صراحة فيه كثير من الخطوات مهم اتمنى لكم النجاح ان شاء الله بارك الله في الاسلام والصلاة والسلام على النبي محمد رسول الله صلى الله عليه وسلم 🤲🫡🌨️🌧️🌨️🤲🏅🤲🌨️🌧️🏅🤲🤲🥰🫶🌧️🤲🫡🫡
you know that we are like each other with one exception we have gotten out of teaching our children our trade i remember that if you were a farmer you taught your sons your trade ifyou were a black smith if you had a son he was taught the trade i love to see that there are people who care for the family my blessings to all of you wonderful people
I personally admire the Pakistanis very much. Although the country's economic development is slow, the international community is surprised that their handmade products feel rough. But my opinion of them is that they are a very hard-working and kind-hearted people, very intelligent. Although the production environment is harsh, their products are very durable, creative and have a classic taste🎉
Wow! A growler I haven’t seen one of those in 40yrs. These guys aren’t doing this for nostalgia I see a growler and think of the old days these guys use one for their daily bred. Keep up the great work!
@@СергейЛубневский-ш4ъ чувак это Пакистан или Индия там с новья подшибосы с квадратными шарами что взять с тех которые уже пару лет без смазки поработали
This is the kind of work ethic that needs the US needs to remember how to do. These guys are providing a solution to a problem and building a business at the same time. Each member contributing to the success and building a skill set. While in the US fools provide solutions that no one asked for to problems they themselves invented.
Funny, I work hard every day running my own business rebuilding starters and alternators in the US. These guys are doing so much wrong I would have to reeducate them on how to rebuild. I understand they do not have much to work with but they are not even doing the basic stuff correctly. I have no idea where you live in the US, but around here almost everyone works hard and has this work ethic. But I am in a mid west farm community and you might be in a big city, and that could be the problem.
Saudações aos irmãos paquistaneses, quando comecei a trabalhar a uns 30 anos atrás aqui no Brasil era muito comum se recuperar quase tudo, mais com o passar do tempo ficou inviável realizar alguns processos e hoje é mais rápido e vantajoso adquirir os componentes Novos, mais são excelentes profissionais e me fizeram viajar para o passado na oficina do meu querido pai, um grande abraço.
Sungguh luar biasa pekerjaan dngan kesabaran yg tinggi dan ketelatenan Bagaimana itu tembaga yg sdah ngelupas bisa digunakan kembali dngan isolatip dinegara saya tembaga klu udah ngelupas di buang ke sampah ganti gulung yg baru good job
I run a alternator and starter rebuild shop in the US and can easily outdo these guys. And mine will last years not days or weeks with all the things they did wrong.
I don't know what country youre talking about but there's starter\alternator rebuild shops all over. They're just not as common as AutoZone or O'Reilly's are, and most people just want a 'new'(rebuilt) starter now, instead of waiting a day for the shop to fix theirs. I have one by me that I use to fix starters that aren't too short. You just have to look for the places, it's not gonna appear unless you type starter\alternator repair in Google, not where to get a starter! 😅
@@maxleontev9552 А то что практически полстартера с новыми запчастями и ещё часть была восстановлена, это не считается? Там из старого только бендикс, редуктор и задняя крышка.
@@gjgjd5920 корпус, обмотки, якорь, валы, бендикс, втягивающее, все старое. Поменяли изоляцию на обмотке неподвижной, поменяли коллектор, контакты и щетки. Не заметил, меняли ли втулки.
Very very very very good job my friend we need this kind of man of his work in our country and i know he will do our job good clean and not too expensive we need him ❤❤❤ god bless this man
good Fn god the commercials!!!! thats y this video has a .47 like to watch percentage a half a percent of everybody that saw this liked it, whiches waaay low its because u cram as many commercials in as u can its youtube, u barely have to try, dont worry just less commercials its pretty hard to make ppl happy, but Really easy to do the opposite, n theyre one of them
I was amazed and intrigued by the giant soldering iron the mechanic was using, I just imagine if it was an electric soldering iron it must have been quite expensive, a soldering iron that size I thought was quite expensive and very rare. After looking carefully the soldering iron is not actually an electric soldering iron, maybe it is just made of any scrap metal but the mechanic can use it by heating it using a gas flame or kerosene burner and it works just as well as an electric soldering iron.
Наши ремонтные предприятия до таких работ не доходили. Просто было много запчастей с завода. Те же обмотки, ротор в сборе, плита коллекторная, бендикс были с завода как запчасти.втулки. Иногда и статоры в сборе, а иногда обмотки. Сейчас для нас это нонсен, так ремонтировать.
![Twenty One Pilots - The Line (from Arcane Season 2) [Official Audio]](http://i.ytimg.com/vi/XCz7WUotXs8/mqdefault.jpg)
genzeht listrik kable data ...trimakasih....sultan
I Love these HONEST and DESCENT PEOPLE and I like ALL the works they do.They don't take time for a bag of potato, Nacho or hot chocolate. They know the sayings of Agur of The Book of Proverbs.Time is is so precious and irrecoverable.
I've pulled starters apart to see what makes them work. Then I just have smaller pieces to put in the bin. I wouldn't have the patience to rebuild one. Let alone do it for a living. It is amazing how everything is kept going. All these little workshops up and down the streets. Each churning out their own little bit of the puzzle that makes a whole object. And all the kid workers ready to become the next generation.
In a sane way pockets of sane, 'non-digital reenforced' work will survive.
In Canada, I had to figure all that stuff out on my own without any internet, adult mentors, or money whenever my own stuff broke down and I had to get it up and running wherever it dropped. It's a relief to see it done right, full rebuild, with proper machinery and proper materials.
I done it myself, just because I could but wouldn't do it again. There are pretty cheap to buy with life time warranty .
The ones with soldered brushes suck. The ones you can replace as assembly are easy
Люди с золотыми руками и большими сердцами! Настоящие трудяги и мастера своего дела 👏🏻👏🏻👏🏻
😊😊😊😊
😊😊😊😊😊
😊😊
😊😊😊😊😊😊 AA😊
😊😊
i like the smiling after hard working
i belive they could repair even a spaceship
Технологии-огонь!!Но в этих условиях это оправдано.И это работает!!Мужики работящие!
Лучше завода АвтоВАЗа😂 Респект 👍
Мне вот интересно стало,они космический аппарат к луне отправили тоже так же собирали?😅высокотехнологично блин. А вы тут в россии жалуетесь на низкое качество запчастей😂😂😂 вот где качество,вот где нанотехнологии
@@aleks-gq3bt на старых стартерах автоваза башмаки на статоре не надо высверливать - они на витах прикручены - хочешь мучаться бери и делай как этот индус - там даже проще! ты ведь своими словами не автоваз ругаешь а признаёшь что у тебя руки из жопы!!!
Love watching a skilled tradesmen working with an apprentice. Both working with their hands and heads, instead of today's generation sitting on their asses in front of a computer screen, doing mindless redundant sleeping in front of a desktop TV screen. Clicking the keyboard, and not getting their manicured fingers dirty, but still demanding six figure salaries for 3 hours of daily work.
Смотреть за мастером одно удовольствие. 👍
Молодцы! 👍🇷🇺
Good job... Rebuilt to be good as new! This was also very educational as it shows the insides of a starter and what's needed to restore it to working condition. I always thought the field coils were round wire, not flat copper strips with insulation in-between to prevent shorts. Your son (?) is a wonderful asset and you are teaching him a trade that he can keep forever. A good father for sure. A++
Good
It is not as good as new. He compromised the reliability in several ways. He removed the rubber waterproof insulator on the electromanetic winding, replacing it with a paper insulator whose insulative dimensions he determined by his eyes; he placed this paper on coil designed to carry hundreds of amps of current. Then to secure this insulative paper in place he wrapped a piece of clothe around the coil, that he then tried to waterproof with paint. You, the original insulator that he burned with a lot of effort, was designed to withstand the high temperatures in the coil. It was impervious to water. We do not know how well or long his paper insulator will withstand the heat generated by the passage of high currents in those windings. And then we do not know how well the cloth and that paint will sustain the same heat resistance. We do not how long that paint will last as the amateur spins in that enclosure. It works when new, but a motor is designed to be durable... What happens if the vehicles starter is placed into passed through water, and has to be started before the starter dries out????
Really well done 🙏
@@DimbweMazala A lot of what you say is true, but rewinding shops used varnish as an insulator for over 100 years. The paper isn't perfect, but I've seen paper insulation on many, many motor windings. It works. Furthermore, he used Gold-Tex Insulation paper. It's impregnated with an insulator so it won't absorb water. They did a fine job IN MY OPINION.
Дай Аллах этим людям здоровья. Чтобы они ни в чем не нуждались
Imagine when they have a proper clean workshop or factory ? they build the complete truck..respect and regards from Spain.
And all the PPE they'd have to wear.
Ok will 😅be
ติดต่อ
Eles já constrói um caminhão completo é só pedir 😅😅😅😅😅
@@dcolb121^😊
Молодцы мужики и дети растут помощниками всем мира и добра
ALLAH yatikoum saha amin a rabi
When I had my Angling Boat, there was a small workshop just like this a few miles away. Everyone took their Starter Motors and Alternators to get refurbished and he did a brilliant job. Unfortunately he is retired now. These fellows are just like him, experts at what they do and invaluable. Well done, my respect to you.
Mashallah ustad very nice
I enjoyed the video. I feel proud of being in the same industry. I specialize in repairing starters and alternators in Korea.
Pakistan people is very smart
I tell you what, that’s one hell of an apprentice. He’s Johnny on the spot with everything
Ребята,Вы молодцы!Восхищен Вашей работой. Сделали качественно,на совесть!Парень,помощник,очень старательный из него выйдет хороший мастер.
Pakistani is the great in all machanical filed. .technical mind and very intelligent skills. ..
This person very good working and his work is 100% woranty ...good working good self repairing..very clear dismantling and good fittings. Now see new....that's great.....God bless you brother. .
Very very good video I like it. ..
Power of Punjabis. Brilliant at everything.
Kalau di Indonesia 🇮🇩 kurang tehknisi seperti ini, sangat diperlukan
Bisa banyak langganan, bapak ini,
God job, 👍
Punya kenalan teknisi spt ini di Indonesia pak ?
Un ejemplo de como hay que trabajár para vivír en paz y enseñar ha los hijos ha llevár sus vidas ayudando ha los demás y ser buenos ciudadanos.....este es un video maravilloso.
As someone watching from the US
• Watching your videos is most relaxing even at 2 x speed. Hope your customers appreciate the skill talent and dedication of your workers for this very important job
• It’s good to see how well you understand the design and layouts of the engine starter to get the job done efficiently - loads of experience is evident with this skilled set of workers
• Watching your people doing a great job make me think there is hope for the other parts of society who don't even try to have a job. Your crew is a great role model for all of us
• Thanks so very much for posting and sharing!
All the best and God Bless. 🇺🇸
Saludos y am from México
A very skilful person at work video. Recycling is a starter for saving our planet.
Чем такой труд лутши новый купить
الله ابارك فيكم صراحة فيه كثير من الخطوات مهم اتمنى لكم النجاح ان شاء الله بارك الله في الاسلام والصلاة والسلام على النبي محمد رسول الله صلى الله عليه وسلم 🤲🫡🌨️🌧️🌨️🤲🏅🤲🌨️🌧️🏅🤲🤲🥰🫶🌧️🤲🫡🫡
you know that we are like each other with one exception we have gotten out of teaching our children our trade i remember that if you were a farmer you taught your sons your trade ifyou were a black smith if you had a son he was taught the trade i love to see that there are people who care for the family my blessings to all of you wonderful people
Fantastic . I can still remember when we fixed things . Good job .🇬🇧🇬🇧
Yes, thanks
In europa questo lavoro sarebbe costato 10 volte il valore del prezzo comprato nuovo !!!! La nostra è la civiltà del consumismo !!! Ma ci Conviene ?
I personally admire the Pakistanis very much. Although the country's economic development is slow, the international community is surprised that their handmade products feel rough. But my opinion of them is that they are a very hard-working and kind-hearted people, very intelligent. Although the production environment is harsh, their products are very durable, creative and have a classic taste🎉
आप कहाँ से मुझे जानकारी चाहिए
आप ने सेलफ काम किया गया है बहुत ही सुंदर जानकारी दिया गया है जानकारी के लिए बहुत बहुत🙏💕 देता है
Wow! A growler I haven’t seen one of those in 40yrs. These guys aren’t doing this for nostalgia I see a growler and think of the old days these guys use one for their daily bred. Keep up the great work!
I'll wager most won't know what you mean by "growler".
@@dcolb121 I even looked it up to make sure I had the right word. It’s been so long I hardly know what I mean?😉
terimakasih pomens motul
worksop stor tremiakasih mothul pomens
Новый стартер получился.Ручной работы Молодцы.Удачи.
Новый для лоха который купит. Подшипники то старые.
@@Hatori88100 и хорошо что старые
@@СергейЛубневский-ш4ъ ну да ну-да)
@@Hatori88100 ну тогда каждый месяц два будете их менять, проходили уже такое у этих мастеров. Сам лично оставил подшипник генератора ходит уже 450тыс
@@СергейЛубневский-ш4ъ чувак это Пакистан или Индия там с новья подшибосы с квадратными шарами что взять с тех которые уже пару лет без смазки поработали
This is the kind of work ethic that needs the US needs to remember how to do. These guys are providing a solution to a problem and building a business at the same time. Each member contributing to the success and building a skill set. While in the US fools provide solutions that no one asked for to problems they themselves invented.
Aha, that last part is the best I've heard in a long while. So on point! 🤣 😂
Late stage capitalism
US dont fix problems.. they throw it to trashbin.. build a new design..
Funny, I work hard every day running my own business rebuilding starters and alternators in the US. These guys are doing so much wrong I would have to reeducate them on how to rebuild. I understand they do not have much to work with but they are not even doing the basic stuff correctly. I have no idea where you live in the US, but around here almost everyone works hard and has this work ethic. But I am in a mid west farm community and you might be in a big city, and that could be the problem.
😮😢😮
Fijne vakmannen ,bedankt voor de mooie video .
Saudações aos irmãos paquistaneses, quando comecei a trabalhar a uns 30 anos atrás aqui no Brasil era muito comum se recuperar quase tudo, mais com o passar do tempo ficou inviável realizar alguns processos e hoje é mais rápido e vantajoso adquirir os componentes Novos, mais são excelentes profissionais e me fizeram viajar para o passado na oficina do meu querido pai, um grande abraço.
É admirável o trabalho que eles fazem com tão poucos recursos.
os caras fazem o trabalho com um cuidado e paciência, que não vejo ninguém da minha geração fazer ou ter curiosidade.
Sungguh luar biasa pekerjaan dngan kesabaran yg tinggi dan ketelatenan
Bagaimana itu tembaga yg sdah ngelupas bisa digunakan kembali dngan isolatip dinegara saya tembaga klu udah ngelupas di buang ke sampah ganti gulung yg baru good job
اااااااه منك الشاب الي يزوق بخظر احبااااااااك💋💋💋💋💋💋❤🇱🇾🇱🇾🇱🇾🇱🇾⚘🌷
Почему парню не доверить некоторую работу, чувствуется что он очень хочет это и умеет, да и похож он на мастера - видно сын.👍
Finally someone who replaces the parts that wear out instead of trying to rebuild everything, doubt you'll see this starter for a long time.
Man your street is sure a busy one
yeah
يا اخي لماذا لا تستخدم الملزمة حتى لا تؤذي يدي الشاب..؟
Why you don't use binding unless you hurt his hands?
Mash Allah subhanllah sanaullah
Perfect toooop
I always like the Pakistani people hardworking nature. They can fix anything with their smart work.
So great to see people repairing something not just throwing it in the bin.
Ребята просто волшебники.
Pakistani people are gifted ❤
Grande profissional mecânico muito bom excelente profissional parabéns pelo vídeo que Deus abençoe sempre seu trabalho muito bom excelente 👏👏👏👏
They just make me reminder about dynamo motor, physics class in my middle school. How great they are.
Класс молодцы
I don't think there is anyone in this country that can do this kind of work anymore. What a wonderful operation this is!!
Here in our country Philippines a lot of skilled workers can do this
I run a alternator and starter rebuild shop in the US and can easily outdo these guys. And mine will last years not days or weeks with all the things they did wrong.
@@user-ll4lf5go1mYou can't do as much as they do because they don't have proper tools and can't afford ppe.. so just stop hating
@@user-ll4lf5go1mwhat did they do wrong?
I don't know what country youre talking about but there's starter\alternator rebuild shops all over. They're just not as common as AutoZone or O'Reilly's are, and most people just want a 'new'(rebuilt) starter now, instead of waiting a day for the shop to fix theirs. I have one by me that I use to fix starters that aren't too short. You just have to look for the places, it's not gonna appear unless you type starter\alternator repair in Google, not where to get a starter! 😅
I've never seen such good professionalism , great , Risto. United States
Professional I brought my starter to mechanic see this professional guy rebuild starter I need new one
Amazing work, very talented people from Pakistan. Salute.
22:52 Khaby Lame🙂
Small boy knows all about the work 👍
Be proud
السلام عليكم ورحمة الله وبركاته شكرا على المعلومات القيمة اخوك خالد من المغرب الدار البيضاء
Хорошие мастера, золотые руки у людей
Но почему они все без табуретов, а на корячках?
SUPER !!!
Mashallah dear ka
Основательный подход к ремонту, хотя тут будет точнее практически изготовление нового.
заменили мало деталей, в основном все старое перебрано
@@maxleontev9552 А то что практически полстартера с новыми запчастями и ещё часть была восстановлена, это не считается? Там из старого только бендикс, редуктор и задняя крышка.
@@gjgjd5920 корпус, обмотки, якорь, валы, бендикс, втягивающее, все старое.
Поменяли изоляцию на обмотке неподвижной, поменяли коллектор, контакты и щетки.
Не заметил, меняли ли втулки.
@@maxleontev9552 Обмотку на статоре перемотали, голова новая, щеточный узел, коллектор, вал тоже заменили, там пол стартера практически заменили .
@@gjgjd5920 ок
손발이 척척 잘 맞네요 수고 했습니다 FROM KOREA
This guy did a really good job 👍
대단한 실력 이시네요....
옆에 아드님 인가요...보조 잘하네요....
영상 잘 봤어요....
AWESOME!! Better than new! Thank for sharing this wonderful video.👍👍👍👍👍♥️
Thanks for visiting
Terbaik
que gran ayudante tiene esta muy atento en todo lo que hace, en poco tiempo estara preparado para hecerlo el solo, un slaudo desde BARCELONA ESPAÑA
The used T-Mobile coverage, master news procrastinate definition. Smell like. Neosporin put Pisgah.
سلمت يداك
Very very very very good job my friend we need this kind of man of his work in our country and i know he will do our job good clean and not too expensive we need him ❤❤❤ god bless this man
Thank you
muy bueno pero lo mejor el hijo aprende a trabajar felicitaciones, desde venezuela
یا سبحان اللہ ۔
good Fn god the commercials!!!! thats y this video has a .47 like to watch percentage a half a percent of everybody that saw this liked it, whiches waaay low its because u cram as many commercials in as u can its youtube, u barely have to try, dont worry just less commercials its pretty hard to make ppl happy, but Really easy to do the opposite, n theyre one of them
Maşallah, maşallah.
Türkiye'den selamlar. Güzel el emeği.. gerçek ustalık
Como esse pessoal desse país gostam de trabalhar agachado, alguém reparou nisso? É tudo no chão mesmo ...kk
Worth it to watch the whole process👍
بہت اچھا مواد، میں مرمت بھی کرتا ہوں میں صرف محنت کا تصور کر سکتا ہوں، خدا ان تاجروں کو سلامت رکھے
I was amazed and intrigued by the giant soldering iron the mechanic was using, I just imagine if it was an electric soldering iron it must have been quite expensive, a soldering iron that size I thought was quite expensive and very rare. After looking carefully the soldering iron is not actually an electric soldering iron, maybe it is just made of any scrap metal but the mechanic can use it by heating it using a gas flame or kerosene burner and it works just as well as an electric soldering iron.
Saya dari Indonesia salut dan kagum sama cara kerja anda memperbaiki motor starter keren👍👍👍👍👍👍👍 salam dari Indonesia
Профессионал
Наши ремонтные предприятия до таких работ не доходили. Просто было много запчастей с завода. Те же обмотки, ротор в сборе, плита коллекторная, бендикс были с завода как запчасти.втулки. Иногда и статоры в сборе, а иногда обмотки. Сейчас для нас это нонсен, так ремонтировать.
Great Work, this is the real Way to save Resources.
Хороший стартер, походил бы еще тыщ 100
very nice job 👍👍👍
Thank you very much
Very good work Congratulation
Thank you very much
BRAVO EXCELENT
OMG 😱
Unbelievable lots of patience and nitty gritty work
Yes, thanks
A true Craftsman from start to finish all hand worked grate job
❤❤❤باشکوه استاد وشاگرد عزیز بسیار عالی همکاران عزیزم ❤❤❤❤❤❤❤❤
Super ludzie i super robota👌
good job man 👏👏👏👏👏👏👏keep going 👍👍👍👍👍
Thanks! 😃
Uma verdadeira mão de obra bem qualificada parabéns pelo seus trabalho saudações aqui do Brasil 🇧🇷
Не выбросить, а починить. Вот настоящая забота об экологии, а не эта ваша Тунберг