Adam Savage's Favorite Tools: Machinist's Blue Layout Fluid
HTML-код
- Опубликовано: 7 сен 2020
- Starrett machinist scribe: amzn.to/2Zeidzf
Dykem Blue marking fluid: amzn.to/332dTV4
Dykem Red spray marking fluid: amzn.to/334y6t7
Adam covers an essential tool he's been using a lot lately in his machining journey, and that's Dykem blue layout fluid for making precise marks on material when even a fine tip pen won't do. Adam demonstrates how to use layout fluid with his recommended scribe and explains why it's worth investing in a quality scribe for your projects!
$37 workshop apron: amzn.to/3fHKdSs
Dewalt Safety Goggles: amzn.to/330a4Bf
Adam's Everyday Carry in his apron:
Papermate Sharpwriter #2: amzn.to/2xSMaKL
Pica Pen: amzn.to/2TcSep9
Whiteout Pen: amzn.to/2YSrvSg
Small Machinist Square: amzn.to/311GLLq
Flush Cutters: amzn.to/3csoGuY
Dial Calipers: amzn.to/3fGRSk4
Giaco Maker Knife: giaco.com/products/maker-knife
30-degree Multi-Blade Cartridge Knife: amzn.to/2LKyQvq
Heavy Duty Multi-Blade Cartridge Knife: amzn.to/2Zm3DXy
Multi-Blade Cartridge Snap Knife: amzn.to/3cJnJyP
Extra blade packs: amzn.to/2X5hChw
Shot by Adam Savage and edited by Norman Chan
Disclaimer: Tested may earn an affiliate commission when you buy through the links here.
Tested Ts, stickers, mugs and more: teespring.com/stores/adam-sav...
Subscribe for more videos (and click the bell for notifications): ruclips.net/user/subscription_c...
Twitter: / testedcom
Facebook: / testedcom
Instagram: / testedcom
Discord: / discord
Amazon Storefront: www.amazon.com/shop/adamsavage...
Tested is:
Adam Savage / donttrythis
Norman Chan / nchan
Joey Fameli www.joeyfameli.com
Gunther Kirsch guntherkirsch.com
Ryan Kiser / ryan.kiser
Jen Schachter www.jenschachter.com
Kishore Hari / sciencequiche
Sean Charlesworth / cworthdynamics
Jeremy Williams / jerware
Kayte Sabicer / kaytesabicer
Bill Doran / chinbeard
Ariel Waldman / arielwaldman
Darrell Maloney / brokennerd
Kristen Lomasney / krystynlo
Intro bumper by Abe Dieckman
Thanks for watching!
#AdamSavage #FavoriteTools 
Наука
Starrett machinist scribe: amzn.to/2Zeidzf
Dykem Blue marking fluid: amzn.to/332dTV4
Dykem Red spray marking fluid: amzn.to/334y6t7
I love your work Adam 🙂
Hey Adam I believe engineers blue can also be found in broad marker form. I find it can be quicker to apply and more even than painting it on.
Suggestion for the tool favorite tool series a page on tested and or tested amazon affiliate link page listing all of the favorite tools to go back to find the list as a whole for the favorite tools.
Hi Adam! *Clickspring* fan here. Love seeing your brass work. Cheers from Australia. ;)
Adam, you have always been and will always be an eccentric and endearing character. Rock on!
Aerospace machinist here, another very good way of marking parts, especially deep down in a pocket, is to use a Sharpie marker, blue or black and then spray your air gun on the tip of the marker and it acts like an airbrush. Been doing this trick for years as a machinist. 30+ years, and it works every time perfectly. Remember, hold your Sharpie marker point at an angle and spray with your air hose gun at an angle and it acts like an airbrush, it works amazingly well.
Amazing stuff
I can hear the singing of a young british blacksmith off in the distance.
BLUUUUUUUUUEEEEEEE DDDIIIIIIIIIIKAAAAAAMMMMM!
🤣🤣🤣🤣
who doesn't :-D
I love that someone at Tested knows him as well :) Would love to see what Mr. Steele and Mr. Savage could build together...
I can hear a fart at 4:18
Alec steele youtube blacksmith has a comedic video about his love of Blue D. And his hatred for Red D. Its great.
what video was it in?
Probably FAQ
BLLUUUEE DYYYCUM
I expected Adam to break out in the song. I thought you had to to make it work. :)
Pretty sure Alec has a T shirt.
Ok just checked must have been special run. :(
Not just a video, it's a running gag
In my first machine shop class, OMG, 43 yrs ago now, the instructor had us, as our first mid-term test, build a scribe body like the one Adam is using. Just the body and nothing else. One of the projects on the final was to finish the scribe, complete with the replaceable tip. I have had mine for 43 yrs. I was a very good at welding and so chose that life path, but my son now has all of my tools and still uses them to this day.
As an avid follower of Clickspring as well, I've seen so much beautiful deep blue marking fluid and layout (and even used a little myself) - so hearing Adam enthuse in detail is wonderful!
Thank you, Tom!
I'm convinced that the Venn Diagram of Clickspring, Alec Steele, and Tested viewers is pretty darn near a circle.
@@ERNesbitt Alec tends to grate on my nerves so don't watch him very often
You are most likely correct. I watch all three.
Haven't seen any new vids from clickspring in months.
Adam, I've been a fan of yours for so many years, and you've helped inspire in me the desire to create and to build things. Thanks for keeping me company all these years, and especially during this pandemic.
Adam Savage: I am a Machine Operator.
Hospital: We have the records to prove it! =P
And mister Hyneman 😂
No, but he does have the receipts for tape and gauze...
Indeed, and the machines have operated on him as well!
I am a safety man
I love how even though how he's still trying to get people to buy the more expensive tool unlike most YTers Adam understand that $20 is still a lot of money to some people. Which is saying something when you think about how famous Adam is compared to most of them, he could've easily lost touch with what it's like for people just starting out.
Certain tools are worth getting the best, when they either are the only tool that will work well, or where the premium item does not really cost much more than the cheap alternative. A Common nail can be made into a poor man's scribe on a bench grinder and 30 seconds..... it will work just fine.
In reality Adam is not really all that famous. There are many many MANY RUclipsrs out there, much much MUCH more famous than Adam is, and a whole hell of a lot wealthier than he is.
@smallblockchevy1022 yep. You are absolutely right. But he is still more popular, wealthier and interesting than you
I like how this show gives Adam a chance to really show his appreciation for the behind the scenes tools that make his everyday making life easier.
Have you ever seen stress-reveal lacquer?
A lot like layout fluid, it covers the metal surface but it has a special party trick!
The stuff dries extremely brittle, the slightest bend or flex to the base metal results in patterns of cracks in the lacquer, revealing the amount and direction of the flex.
How sensitive is the stuff?
A shotgun barrel seems pretty rigid, but this lacquer can 'see' the temporary bulge caused by the bullet/gasses passing through.
Shotguns don't shoot bullets. A slug would be the closest approximation. Cool product though. Never heard of it.
@@MrEazyE357 I shoot saboted 50 caliber bullets in mine.
Never heard of it, don't ever foresee needing it, yet now I'm headed to Amazon to order some!
.... sensitive to EXPLOSION INSIDE THE MATERIAL isn't very sensitive
@@MrEazyE357 shotguns can shoot whatever you stuff into a cartridge
His enthusiasm reminds me of my pattern drafting teacher in fashion school. A lovely fellow as passionate about the most delicate work in pattern making
I first watched you use this in a build when I was probably in middle school, now I'm an engineer and use this stuff all the time. Keep up the great videos guys!!! I learn so much from your videos and cannot thank you enough for sharing your knowledge!
Adam, You are one of my favorite tv personalities. I enjoy your spirit and positivity. You give legitimacy to my never ending desire to tinker and build. Be well.
I have gotten countless ideas and new tool additions from watching you adam for along time. The time and fingers ive probably saved. Thanks my man
Hi Adam, I’m a huge fan of yours. Maybe I’m kind of crazy but I cannot tell you how much I appreciate this tips, not only for the tip itself but because this content is a result of lot of experience, try and errors, etc. And that’s a shortcut, a way to build more experience on top of what you teach. Thank you
I love how passionate you are about the simplest tools.
Adam: Good tools will last a lifetime.
Also Adam: Uses perfectly good calipers to scribe a line.
That's one of the very first things I was told *not* to do when I learned basic metalwork all those years ago. I guess that's the difference between being self-taught and having a formally trained teacher.
Some calipers are high precision measuring instruments. Some are semi-disposable tools for quickly marking parts to a useful degree of precision.
Accuracy is time is money, and sometimes time is worth more than finding, "correctly" using, and maintaining a pair of calipers that's accurate to .0001".
@@5thearth That is about 50x more accurate than you should be using calipers for. A micrometer with vernier scale will read that low, but you should verify with gauge blocks.
I’ve heard this too but personally I don’t agree. Any precise measurements should be taken with a micrometer so I’ve never seen the benefit of high end calipers. I use the cheaper ones to scribe and do whatever, and get me close enough. From there I use the mic, but that’s just my take. Plenty of ways to do things and everyone has a right to their opinion.
Yes. That was 20 pushups of punishment in our high school shop.
Me after watching most tool tip videos:
"Oh, that seems like a tool I could use... alright... time to figure out what the hell it's called in my language and if it's even a thing in my country..."
USA! USA! USA!
@@hardpack187 buddy, I get to use the metric system...
REST OF THE WORLD! REST OF THE WORLD! REST OF THE WORLD!
I've used nail polish for the vaguely related purpose of etching metal. Nail polish is also a paint that comes off with acetone and can be scratched into.
If you have no luck finding the official stuff, you can at least find that.
@@HunterRodrigez "Get to"? Like it's a privilege?
@@hardpack187 compared to basically being forced to use the imperial system? Yes, yes it is.
I made my first scribe in vocational school 25 years ago. It was the first final we had. I still have and use it to this day. Our instructor told us this is your most important too you’ll ever make or own. So true.
I love how you talk about a tool that just feels right, and talk Starrett making things that feel right. I recently found an old Starrett cabinet scrapper at a junk sale and found it to be a tool that just felt right in my hands. It was probably 70 years old and was well worn, but it was in good shape and just had that feel to it. Also interesting is another one of favorite RUclips channels by Rex Krueger, who does a woodworking for humans series, also talks about how good Starrett tools are and how good they feel. Plus me being from Massachusetts, and Starrett being a local company gives me a small sense of pride. Thanks for your enthusiasm in what you do, and hope to see you out on the road do live shows again, you really are inspiring.
Every time I learn something new!! Thank you, Adam!
I bought some marking fluid and scribes earlier this year because I've seen Adam use it all the time. Made creating stuff so much easier and more precise.
My Starrett scribe came in the mail today and it is a beast!
Definitely recommend.
I grew up watching you on mythbusters with my grandfather who is a macgyver type person and we loved watching the science and crazy fun every week. I also got to go to your exhibit at MOSI Florida and it was so awesome as a kid. It really got me into science and made it fun. I was your video and as I watched it I thought man he is a little crazy, but then I remembered to love science we all need that little bit of wild thought and energy. Thank you for all you do Adam 🙂.
Yet another excellent and informative video. Thanks, Adam! I have used Dykem for years. I use isopropyl alcohol to remove the dye. It works great and is less toxic than some of the alternatives.
It's always fun to see someone so gleefully enthusiastic as Adam gets.
Back in the early 90's when I was an Engineering Technician - Sheet Metal Apprentice working at NASA Langley Research Center, we used the spray on Machinist's Blue layout fluid. Loved that stuff...worked awesomely.
I Really like this video, Adam. Your passion for tools is infectious. Cheers!
Great stuff. Thanks, Adam.
Ha “peeking above the clouds” is such a great way to describe using a good tool!
He's got so many "favorite" tools that he really should make a video about the only tools he hates lol!
willprogresivo that would be worthy!
I'd love that series!
You don't understand how much I love this channel.
Love your tool tips! Always a must see.
I love it. It helps people make much more accurate marks! This is a wonderful thing to share. It’s so simple and so practical! I have to make parts for ww1/WW2 airplanes. This is what I do.
A height gage with a carbide scribing tip very valuable instrument to have, other measuring dimensions, you can use it to transfer scribed lines onto your part that has been coated with Dykem. A roller to apply the Dykem for flat surfaces is also another very usefull tool.
I am in a CNC machining program at trade school. Last semester we were first on manual Bridgeports then conversatonal CNC Bridgeport style mills that could also be used in manual mode; the Dykem was used extensively to mark out locations for holes and features.
Mr Savage, you truely make me a better maker with your tips. Much love from The Netherlands.
Adam, you are the best!! Thanks for sharing so much
this stuff is great!! thanks for sharing!!
Watching Chris of Clickspring applying this fluid to a slowly rotating part in the lathe is incredibly satisfying. I need to get some of this, I've had it on 'the list' for a while.
Dykem also comes in a bingo-dobber style bottle. This is an awesome application that I find makes less of a mess for me. Your results may vary.
*dauber
Someone else makes one that looks like a large square end sharpie.
One of the projects I had to do for training was to make a scribe. It was made to plan and was made up of several parts. Some were sent out for heat treat. It was a test for us to do small dia int. and ext. course and fine threading along with fit and finish and dimensional accuracy.
That stuff is also great for boat manufacturing. It helps show scratches and imperfection in the boat gel. And sometimes a guild cutting into stuff, but I always used it for tiny scratches.
keep them coming!!!
Wow, thanks for the introduction to new tools
I'm a machinist and one of my favorite projects was to make my own scribe. There are plenty of videos here on RUclips, I manually turned a body on a lathe, knurled the handle, drilled and tapped a hole for a set screw so I could make replaceable tips from old carbide tools! Most little end mills come with 1/8 shanks so if you break one and have leftovers, chuck it in a drill and grind on a tip. One of my favorite tools to see the beauty of others, but making your own is just a little more satisfying.
It's such a nice blue. I've always liked it.
It’s also very helpful on the lathe when using multiple drill
sizes in the same hole or form drills. The dye will let you know if your depths are correct and your leaving material for the finish tool or tools. Also for diameters to clean up. Dykem is a must for machinist, but it has many uses for other stuff.
Before the pandemic, I worked in an engineering shop, and not only do we use Dykem fluid quite regularly, but Dykem also sells a "Prep and Remover fluid", that is really good at cleaning the metal surfaces before applying the marking fluid, and also removing it afterward without any film or residue all in the same fluid, that I am sure can be purchased just about anywhere the marking fluid is also sold.
Can highly recommend one of the latest videos on the main Clickspring channel, where he tries out different alternatives for what they might have used instead of marking fluid in the ancient world. a very informative video on what properties of marking fluid is important, and what could have been possible in the past.
That was fascinating 😍
What to do today... ooh, a video on blue dye. I'm in! That's why Adam is the king.
I've never fantasized about having a machine shop until Adam's videos.
Check out "This Old Tony", "Ca Lem", and "Clickspring" on YooToob. I think you'll like them.
My old man was a machinist in a workshop owned by my grandfather, and I remember them using blue marking fluid when I was a wee tyke. Seeing someone using it now makes me feel all sentimental.
Thanks, Adam. I am seeing you as not just a ‘myth buster’, but as an experienced, genuine and wise patriarchal Journeyman of your trade(s), Thank you for giving back this hands-on knowledge and wisdom!
He was the latter first, then got the tv gig. Now, he has come full circle.
The scribe and layout fluid are two tools that experienced machinists use from so early in their education that they stop thinking about it. Thanks for making this video.
I like and use the General Tools scribes. Those have replaceable carbide tips. The carbide tip stays really sharp for quite a while.
I remember using that stuff in metal shop in the early 70s, Man, what a buzz we got from it.
Adam
Love my Starrett 70b, and a GREAT improvement/mode is to add a pocket clip so I keep it handy in my shirt/apron pocket, just use a pocket clip off a Pentel mechanical pencil, with a little careful bending it fits great on the Starrett.
Also, the 70b uses a 3/16 in diameter scribe point unit, and I bought a 12in cobalt HSS aircraft drill bit, cut it into approx 3.5in lengths and grind the points, and you have a lifetime supply of replacements. You can also find 3/16 carbide rods on line for around $3-4 each, makes a super hard, long long lasting scribe point replacement as well. I know Starretts offers this scribe with a carbide point, but they really charge an arm and a leg for the privilege of having the carbide If you want a 3/16in x 3 carbide rod, drop me a line, I bought several to save on shipping and would be happy you send you want for YOU to sharpen
John
I forgot about this stuff! Back when I was a machinist, we used to use this with veneer calipers for precise hole drilling. Well as precise as you can get on an old clapped out Bridgeport from the 50's.
I still have a 40+ year old metal can of Dykem from an old love affair I had w/ a Bridgeport in the late 70s. We also had an old clapper in the shop but we used it as a hogger when needed. It was kept in the "rough room" next to an old convertible Cincinnati that could run as a vert or a horiz mill. Made 3 F-14 wing hinges on that big green ugly thing. I miss those days.
Gotta start using this!
I used a spray version when I worked at ThyssenKrupp cutting circles and rings.
I have 4 of those pocket scribes by Starrett. Love them. (multiple work spaces and one in my tool bag)
I took 3 years of machine shop in high school. It’s one of the first things we learned to use. It’s good stuff.
2:12 those wheel squeeks were genuine. Adam is awesome!
When I started out as a machinist, I had to buy tools second hand. The Starrett stuff I got is by far the highest quality tools I’ve ever owned. The older stuff wears so well, they last several lifetimes.
I'm not a machinist, I do not own any type of machines, but I certainly know quite a bit about Dykem Blue thanks to Adam and all these videos
So weird. I use to watch mythbusters as an 11 year old kid. Now im a grown adult watching a hero of mine as a kid show some of his tips and tricks. Sooooo Cool Adam! Thanks so much for doing this content!!!
Adam, what you said about buying a quality tool brought back a memory of when I first started in metal working, my boss told me the same thing . I bought my first micrometer 27 years ago , on his advice I spent more than I could really afford at that time and bought a Brown and Sharp . 27 years later it still is accurate to .0001 .
at 6:00 mins in........... to about 7:00 mins..........that's the best explanation of how a maker progresses through their evolution of tools that I've ever heard. Well said.
Just bought some for the first time. Was tired of painting sharpie as fluid to scribe on. worth every dollar.
Hey adam thnx for inspiring me to become a machinist i found my calling thnx to YOU!!! im a lifetime subscriber.. p.s your show is the best. Nothing like a good video after a long day machining..👍
my first scribe was a needle scaler needle I found in the scrap bin at work and sharpened the tip
I like the extra weight in quality small hand tools like awls picks and scribes. More stable in the hands and just feels not flimsy.
if you are working with a mystery scrap pile you can also use marking fluid to tell what type of metal it is. steel and aluminum dry to different shades of blue but magnisum will dry to a more stark shade of purple. while you might say "oh I can tell by whats rusted" sometimes you don't have the time to wait 2-3 weeks for rust and oxide layers to form. plus it takes experience to eye ball that on old cuts just based off the patina that forms. taking a quick brush stroke on a fresh face will tell you what that metal is made of.
Thanks, Ryoku, that's good to know.
Good advice Adam I wish I had known about Starett years ago
When i did metalworking in school as well as the pots with a brush, we had marker pen type things with the blue in to use aswell
I worked with that blue in high school metal shop class one of the first thing we used for making a metal box. Year's later when welding for a shop they had the blue there but rarely used it.
Glad I watched it, you never know if tomorrow it suddenly became a members only vid.
I was looking forward to finish the Q&A vid from yesterday but NO cigar apparently :-(
I recall that in the Replica Props Forum, Adam was the one who identified layout fluid as being used for the blue on a Zorg Industries weapon in "The Fifth Element"
Dykem Blue marking fluid is great and resistant to high temperatures during machining, unlike Sharpie marker. I use both of them as needed. Thank You Adam.
Thanks Adam!
Thanks for this Adam! Just got my Starrett delivered! I have a smaller scribe which was my dads and looks almost identical but it’s not a Starrett, (inscription is from “ The General Hardware Co NY”). It’s quite old. The Starrett tool certainly does feel more substantial.
I've had Dykem on my mind all day, trying to remember what is was called.
I've never used it myself, only seen it in videos.
And of course I come home from work to find a video about it the top of my feed!
Loved this from the first time I saw it in a Clickspring video
After vocational school during my apprenticeship I had to do metrology and drafting mechanical drawing ore on hardening metals. But I enjoyed laying out my materials to be machined. No CNC back then tape run machine was our first introduction to them. Had many big shops calling to hire on. He'll even the army offered grade E5to sign me up. Feels good to do layout its lost art now.
Adam, the other quick and convenient use for the Starrett scribe is to use the point as a quick alignment point in the mill by chucking it either in your drill chuck or collett to then center over a mark. Maybe not quite as precise as using an edge finder but can be pretty good and pretty fast.
I'm getting a three in one and two work bench set up and thank you for reminding this is another thing I forgot I need to get lol
I love everything related to you and you work! I love you since ever XD you rock Dude!
Just learned about this my my machine shop class
I'm an electrician but man, i could watch you talk about tool like its a movie lol, respect A.S
Secret sharpie tip: useful for marking flame cuts on glasss. After initially burning off, the marks become visible again at a higher temperature. This second stage of visibility burns off at working temps. Super useful for component uniformity
To paraphrase an old Swedish saying, "Cheap is expensive". Great video, Adam.
Great to see this, it teaches the basics. We use to claim 0.010” accuracy on small layouts. 0.030” was easy.
Yep! tools matters big time. But what matters most is to lesson from those with great experience and skills set. Knowledge here does not apply much, but knowing the tools yes, experience them, connect with them as one. So he gave you great tips that knowing your tools matters. And getting the right tools is the key or you end-up spending more to create less.
Got a Starrett 4 inch tri square for about 20 bucks one time,the guy who messed up figured it out as he was ringing me up!
Flashbacks to my Industrial Materials class in college!
I personally have no idea about the half the stuff he talks about. But honestly I don’t care because the way he describes things you can hear his passion for his craft and that something worth watching.
On metal or wood (or anything else), I always mark the waste side of a cut, I learned that in the metal working class as an eleven year old in the 60s and have never forgotten it.
A scriber is agreat first lathe project, I made mine myself fro ma brass rod and a piece of stainless steel salvaged from a whisk and it served me well ever since. Clickspring did a great tutorial on the Make: channel a few years back.
That stuff is a god sent
This is one of my favourite videos. Watching crazy ol' Adam "Am I missing an eyebrow" Savage enthusiastically talking to a camera about relatively mundane precision tools is a thing of zen art. But then I'm probably just as much of a tool/fabrication geek as him 🤣