Here's what went WRONG with my new Anycubic Kobra 2 Max...
HTML-код
- Опубликовано: 15 сен 2024
- Hope this helps you guys!
At 8:20 Mins I meant Bed Belt Tensioners.
Please like, dislike, comment, and subscribe. I'm a small youtuber so I tend to read and respond to all comments.
www.anycubic.c...
Let me know if there's anything else you'd like to see.
Twitter: @T_Mac_Attack_
Twitch: T_mac_
Thank you for taking the time and making this video. Hopefully they fix this issue in a firmware update.
I've had my kobra 2 since August 2023 and I've run through multiple issues. I found the inductive sensor is not placed correctly and should be manually adjusted first. I've dealt with X and Y axis layer shifts. The Y VC was due to the vref on the stepper driver being too low. The X Was STUPID high... like 1.96v. Didn't catch that in time and now I've blown the driver so waiting on a new board to arrive. Dealt with a significant over extrusion issue that took months to finally get fully dialed in through flow settings in the slicer. Belt tension was a non issue for me but frankly that's something that everyone should check regularly anyway. I really didn't like that it doesn't use standard volcano models nozzles but replacing the heartbreak with a bi-metal one for a CR6 allows for use of standard volcano nozzles but you'll also have to reset the inductive sensor height. Simply put: These printers are NOT an "out of the box" experience and not beat suited as a first printer.
Advice for anyone with one: check and set the vref for your stepper driver's, as ferrules to the power and bed connections, replace the heatbreak, and properly set the inductive probe height.
I am going to try this out!
Haven't had this issue yet but good Information .... Thanks for sharing.
I've had my Kobra 2 for just a week. at the start, couldn't understand why it wouldn't read STL files, then i found out it runs on OBJ . Once I sorted that it worked flawless. until today. 5 days in and the hotend isn't working. Comes up with a error saying check the wiring etc.
Just got mine today. How are your prints going so far? Any other problems you’ve run into? Maybe you could show a video of what you’ve created!
Good idea!! I'll make some more videos soon! I had a rough start, but it's going well!
I can't seem to make even one print NOT fail with this machine.
The only things that print right are the one's Pre-Installed on the machine itself.
And even those are not showroom quality, my old 3d Printer did better!
With my Voxlab maker, i hardly ever had a failed print.
Owned for 1 month and not 1 finishes without FAIL. Tried all instructions and help online (Bed Leveling/Software issues). Nothing works.
This one sucks. I don't recommend to anyone.
For me, it's been print at 210 temp on head and 60 temp on the bed. I keeps changing the temp. So I figured out on the slicer you can change the temp and it will stay that temp. And I even get the mini flame thrower to heat the bed right after the head comes down to print to make sure the plastic sticks really good when it starts
Any advice for a nozzle breaking/dragging across infill but not bothering the perimeter?
Mine is coming in 20 days, so these videos are useful, thanks!
You'll love it, just remember to tighten those belts! Also watch it closely for the first few prints while being prepared to unplug if things sound or seem wrong!
@@Tmacbh Ok, thanks for the tips!
I'm having to replace the $39.99 head every 3 weeks like clockwork on all 3 of my anycubic. I have one max and two neo. This is my first 3d printers so didn't know if that's normal. I use PLA
It polished big circles
Yup am having the same issues rn and its frustrating ngl , i just got mine 3 days ago and tried printing 4 different big models +300g each and all failed hardly due to layer shifting , i tried tightening the belts that didnt work for me , i just updated the softawre and launched another print and now am just hoping for the best idk what else to do
If that software updated didnt help, try to go in settings and reset to factory setting. That helped me solve 3 printing issues so far!
How’d it turn out?
@beej5 it worked , basically the software updates stopped the stupid layer shifting for good
@@soheibabadlia8504 great to know! I print my first tests today!
@@soheibabadlia8504 Mine just layer shifted 10 mins in and ruined my project on the latest update.
It's not gone for good, it's still there.
Sense i owned this i haven't got 1 print to actually finish without failing.
My printed did that
Help
Use warranty for mag mat. Anycubic sending me whole new extruder. Warranty is good.
Help