How to Replace Front ABS Wheel Speed Sensor 2003-2007 Honda Accord
HTML-код
- Опубликовано: 9 окт 2023
- Buy Now!
New ABS Wheel Speed Sensor from 1AAuto.com 1aau.to/ia/1ABES00121
This video shows you how to install a new ABS wheel speed sensor for your 2003-2007 Honda Accord. ABS wheel speed sensors are critical to the operation of your vehicle's ABS and ESC systems, which use real time wheel speed data to ensure your vehicle stays safe and on the road. These magnetic sensors are sensitive and susceptible to damage, which would require replacing them.
This process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obre/1AXAA00013
• 10mm Socket 1aau.to/objy/1AXAA00017
• 19mm Socket 1aau.to/oann/1AXAA00043
• 1/2 Inch Impact Gun 1aau.to/ou4/1AXAA00252
• 3/8 Inch Drive Ratchet 1aau.to/obEB/1AXAA00015
• Socket Extensions 1aau.to/obEB/1AXAA00015
• Torque Wrench 1aau.to/oaMr/1AXAA00044
• Gloves 1aau.to/oanL/1AXSS00048
• Rust Penetrant
• Safety Glasses 1aau.to/oafA/1AXAA00343
• Floor Jack 1aau.to/oabF/1AXAA00068
• Jack Stands 1aau.to/oYD/1AXAA00065
• Pick 1aau.to/oSC/1AXAA00037
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
If these are old enough they are pretty impossible to get off without breaking it. The required force is stronger than the plastic material it's made of.
great video, it saved me 100 bucks from a trip to the mechanic
Thanks!
You are the only video that tell torque of wheel sensor, 7.2.LBs Haynes says it's 86 LBs. Good grief I knew that was wrong.
How deep you have to drill so axle dont get damage approx length of screw drill?
Will this work on the Acura TSX?
So if it broke the light will come on? Becuase I remember I changed the axle seal on the right side and that part by the side broke but it was still able to go on
You didn’t clip the orange connector back when installing
Using chrome on an impact…