Thank you for this! The process of getting to the bulb without completely removing the bumper was gold. Was exactly what I was hoping for and looking for. Worked perfectly.
Definitely more in depth instructions then other reduced time removal processes. Did the LED bulb come with the HID to keep the headlamps from flickering when you turn on the Turn Indicators? Its hard to hear you sometimes during the video maybe get a remote microphone so it can pick up your voice. Thank you for your hard work.
LED bulbs can last as long as 30,000 hours. That's enough to make it through the entire lifespan of many vehicles. I have mine for just for over a year.
@@justdoityourself I will add, I've seen how they are held in the housing. They have a retaining clip. I'm not sure if that could be replaced without removing the housing. But you're right the HB bulb hardly ever goes out.
Yes, there is a chance to break something with that much force. That's why it is important to keep plastic warm when doing this and even better remove bumper and do it proper way.
In some configurations low beam lights are used as DRL, lower voltage is supplied to them, just so they are not so bright. This works well with regular incandescent bulbs, but LED needs full voltage. Is is your case? Is so you would need to use regular bulbs. In my case, drl are on a separate bulbs, so it works well.
@@justdoityourself thanks for the vid. Going to replace with std bulb on my 2016. The led DTL are acting weird. Do you know if they come with LED from factory?
@@justdoityourself twist to the left or right when looking at the front of the car helps. Two hours and I figured it out with mostly your help. Talk less and show more is my advice.
Thank you for this! The process of getting to the bulb without completely removing the bumper was gold. Was exactly what I was hoping for and looking for. Worked perfectly.
Great work!
Thanks for the video! Just ordered me some LED bulbs. Driver side went out so I'm sure the passenger side isn't far behind.
Definitely more in depth instructions then other reduced time removal processes.
Did the LED bulb come with the HID to keep the headlamps from flickering when you turn on the Turn Indicators?
Its hard to hear you sometimes during the video maybe get a remote microphone so it can pick up your voice.
Thank you for your hard work.
The new LEDs did not flicker under any circumstances. Thanks for your feedback on the video sounds!
Thank you so much, this greatly helped me!
You're very welcome!
This was great, so helpful. Thank you!
You are very welcome!
Post sizes for all bolts removed and post the bulb types. This would be golden.
Thanks for your feedback!
Same method on ford fusion hybrid 2014?
I would assume so.
So a 2020 for fusion se only has one bulb for high and low beam
Thanks for your comment!
How long do the led bulbs last compared to the stock bulbs?
LED bulbs can last as long as 30,000 hours. That's enough to make it through the entire lifespan of many vehicles. I have mine for just for over a year.
@@justdoityourself did you also replace your high beams?
@@garyclinton6466 no I didn't. I almost never use high beam, so they should last forever.
@@justdoityourself I will add, I've seen how they are held in the housing. They have a retaining clip. I'm not sure if that could be replaced without removing the housing.
But you're right the HB bulb hardly ever goes out.
So is we turning the bulb left or right im confused
Counterclockwise to remove. Clockwise to install.
About how long does it take to replace a bulb?
10-15 minutes
All that pulling will break something. Be careful
Yes, there is a chance to break something with that much force. That's why it is important to keep plastic warm when doing this and even better remove bumper and do it proper way.
Greetings, I upgraded my DRL and now they only come on if the low beams are activated, any suggestions? Thanks in advance.
In some configurations low beam lights are used as DRL, lower voltage is supplied to them, just so they are not so bright. This works well with regular incandescent bulbs, but LED needs full voltage. Is is your case?
Is so you would need to use regular bulbs.
In my case, drl are on a separate bulbs, so it works well.
@@justdoityourself The DRL is a small 194 bulb?? Thanks for your speedy reply!!
@@kevinjackson8422 that is correct.
@@justdoityourself thanks for the vid. Going to replace with std bulb on my 2016. The led DTL are acting weird. Do you know if they come with LED from factory?
@@mest1589 Thank you!
I am pretty sure that they come only with standard incandescent bulbs.
What fuses?
How about to change the HIGH beam bulb? 🤷🏽♂️
Haven't done that, my apologies.
@@justdoityourself I would imagine they could be done at the same time as the low beam bulbs 🤷🏽♂️
@@tch632 depends on your driving style. I almost never use high beam, so do not expect the bulbs going bad any time soon.
@@justdoityourself I live in very rural area
@@tch632 then it is a good idea to replace both for sure. If you don't mind please share how much more effort it took to replace high beam bulbs.
Can I please have the size of the bolts that hold the headlights in place pleaseew
I believe they are 10mm
@@justdoityourself thanks I will try it later
@@exns201-5 good luck!
Thank you bc I really don't want to give the dealership $500+
$500?
@@justdoityourself Yes for just labor
@@kimyaalston6679 Wow, insane.
Next time could you film yourself taking out the bulb because we all know that is what majority of us are having a problem eith. 😂
Absolutely. Thanks for your feedback!
Hey man I’m stuck on pinching the bulb out… trying to pinch the bulb out driver side currently with no luck
Do I need to twist it clockwise or counter clockwise to pull it out I don’t wanna break it
@@edwardbund4856 I am pretty sure it is counterclockwise to get it out.
I’m in the same boat
The light was a bit too get out. 100% not easy
This car is something else, when it comes to maintenance, haha 😄
Typical Ford junk. Always a pain n the ass to work on anything blue oval.
Hard to maintain fir sure, but must admit, it was nice to drive
I wanna drive my fusion off a cliff!!! Sick of the inconveniences of this car!!
Have you changed cabin filter yet? 😉
@@justdoityourself nope and I'm sure I'll have to cut the car in half for that job.
@@6Sisu9 very close guess, 😄
@@justdoityourself lol
@@6Sisu9 Cabin filter will take 20 min tops. Remove the glove box and the filter opening is right behind it. Quick & easy.
U too Slow !
Half the video before he done anything
Thanks for your feedback.
@@justdoityourself twist to the left or right when looking at the front of the car helps.
Two hours and I figured it out with mostly your help.
Talk less and show more is my advice.
@@edwardjohnson8933 glad you got it figured! Thanks for the advice.