Big Red Gets A Transmission Rebuild!
HTML-код
- Опубликовано: 13 сен 2024
- Email me at austin@avrcustoms.com
Transmission Rebuild Kit: cobratransmiss...
Transmission Gear Oil: amzn.to/3EMIDM9
Transfer Case Gear Oil: amzn.to/36QwRE2
Pressure Washer Sand Blaster: amzn.to/38sHJs2
Short Transmission Jack: amzn.to/3erZbgN
Tall Transmission Jack: ebay.us/LmAzc5
20 Ton Press: amzn.to/33puIK0
1/2" Impact: amzn.to/3EMI4Sx
3/8" Impact: amzn.to/39mKFHn
Bearing Separators: amzn.to/3vUUmTn
Gear Puller: amzn.to/3xURoQn
3 Jaw Puller Kit: amzn.to/3us2v12
Snap Ring Pliers: amzn.to/3uuPt2P
Camera equipment used in the video!
Sony A7II Camera: amzn.to/2yprn1p
GoPro: amzn.to/3ty94RJ
Tamron 28-75MM Lens: amzn.to/3EH6ufl
Tripod: amzn.to/2WjasJM
Send me stuff!
PO Box 133
Chattaroy WA 99003
Amazing bro! I wish I had your skills to take apart a transmission and put it back together
Do it once and its not bad, transfer cases are a piece of cake, I was always breaking inputs. I learned from pirate4x4 and had to figured it out. There is so much information on there in the Toyota Bible anything you have questions on is in there you just have to find it!
@@cgmwoodworx thanks for the info I’ll definitely look up that Toyota bible
Looked so clean… that power wash method works 👊 so much work. That truck is killer
Sweet. Just dropped the trans out of mine and going to have to rebuild it. This will help!
I can’t get over how far you have come from the beginning with this truck! It looks so good and your videography has really improved. Love continuing to watch and seeing things I have never seen before. 💪🏼
You stripped that box like a surgeon. Awesome work
Beautiful truck if I was able drive a manual transmission truck I’d love to buy it. As far as I know nobody makes hand controls that work with a clutch.
Not really that hard to learn honestly
@@garrett2717 hand controls implying disability bruh
@@garrett2717 it’s not that I don’t know how to drive a manual cause I started out driving a manual transmission. It’s that I’m a paraplegic now and everything has to be done with hand controls.
Is there really no hand control options for manuals? Seems like a missed market honestly
U made it look easy , that's the kind of thing i wouldn't think it would cost so cheap , you're literally becoming a pro at doing mostly everything in an engine that's pretty cool and we can always learn with you and that's pretty awesome as well , i understand u may want to sell big red but i would think u wouldn't ever sell it because it was the first project , but yeah things change and that may mean another cool project, but would be cool big red stay in the garage we like big red even with the uglier butt it still is Big Red !
At least do a dyno with both trucks I'm pretty curious because big red has a lot of stuff on it !
Hey, one quick tip on those bearing splitters. Put the forged part of the splitter across the gap in the supports so there is no bending force on the threaded rods. otherwise you bend the rods and have to replace them. Ask me how I know :P
Looks much faster the 2nd time around. Think im gonna find a junkyard donor and give it a whirl.
Do it!!
The water sand blaster works great
Awesome truck/build. I love the older body styles. You've put a lot of hours in it and it shows! Realistically speaking, what would you say the tow rating is for that chassis/powerplant?
Looks like you have down now!
Also the lift helped out a bunch too.
Amazing build man, one of the cleanest toyotas on youtube. How do you like the w56 behind the diesel? I am in the process of swapping a R2.8 cummins in my 85 4runner, and praying it holds the 300+ ftlbs of torque lol.
Looks good! You need a slab outside your shop. I put one outside mine and can't believe how much I use it and how much cleaner the shop floor is.
I know but with mud prices it’s hard to spend that much!
This is the most fascinating thing I’ve ever seen this year by far. Seeing that tranny getting washed dis and re-assembled is so dope. It’s pretty intimidating also interesting seeing all the labor and intricate work involved.
Be honest. Did you have to watch the video footage a million times to get that all back together? This is some kinda black magic! The more I see of transmission rebuilding, the less I understand. Good for you though for getting it. Mad respect!
Alien technology.
I take a few pictures! But this is my 3rd rebuild so I know how they are assembled now!
These requires a lot of experience
Maybe get a 10 x 10 shade and tarp the sides to make a sandblasting room that's easy to put up and take down.
Saludos amigo desde Bogota-colombia, que masestro excelentes trabajos, me divierto y aprendo viendo sus videos , muchas bendiciones
Another stellar job and a very entertaining and educational video! I'm still awaiting the diesel swap of the Suzuki Carry...... Maybe a little 3 cylinder Kubota engine off a zero turn mower like a Grasshopper or something similar.
enjoy at how many pieces of equipment/tools you have modified or made.
I'm planning rebuilding mine r150f later this year , using your other video as a guide .
In my mind, a hydraulic lift arm on the bed for cargo would be a perfect addition 🤔
Always enjoy watching your videos. But curious note on the green truck. Why does it sound like a lawnmower or old farm tractor when you start it up lol... almost want to put a rain flapper on the tail pipe... Don't get me wrong I like that truck. But chuckle when I hear it fire up.
Were you using Redline shockproof before the rebuild with the blue fluid?
Yes!
If not use a torch wrench, how do you know the specific torch for every bolt?
I only found this channel yesterday and i already love it. Is Big Red also Diesel swapped or is it just a 22RE?
Nevermind. I looked way back in the videos and got my answer.
Your a hell of a mechanic man,,just took my w56 and transfer cas to high gear in Memphis to have it gone through,,they said the transfer cases never wear out,,I told them that I wanted it gone through anyways because I had bad luck ,,so 1600 dollars later I got my transmission back in the truck
And just like you that was the last thing that I haven’t went through on this truck,,super tight now with the transmission with all new bearings and syncs ,,
I don’t have a lift like you do in the shop,but with the truck lifted and the big tires,,I put 2 big pieces of foam rubber on the edges of the cab just above the windshield ,I use a small chain around the cab and hook it back to itself,,then I use a 500 pound hoist and I got a small chain just I from of the shifter,,it balances pretty well,,and it goes back in just as easy
wont be the same without big red
I also think that way man but yeah ... we got to go what we got to do sometimes ...
If anyone watched the build on the red Toyota, they would pay top dollar. Insurance companies could appraise the value of the truck. Have you considered doing a raffle?
Maybe next add to the rearview mirror a air temperature, and compass, and a camera
Well you made that look really easy
Really nice work dude, you are a craftsman 1st class, greetings from the Netherlands
I had a feeling that you were going to sell Big Red. If someone in Ca. were to buy BR, would she pass emissions with the diesel swap? She sure is a beauty! I know the guys in Hawaii would love it! Great job on the tranny rebuild and video, is the Hilux next?
Oh dude! This pressure washer attachment is so useful. Where i can buy these ?
I have a link in description!
Back in the 70's, it was groovy to have a Hurst shifter handle
what a skills, Amazing job like always!!
Would that high pressure sandblaster be powerful enough to remove paint?
I have not tried it for that! It may but would be slow I'm sure
Forgive my ignorance, what transmission is that?
R150F
Sara n tuned needs one of those sand blaster / pressure washer adapters.
Say, maybe in a future project, you could put a 4.3 V6 (from a Chevy S10) into a 1990 Toyota? XD
you make it look so easy peasy lemon squeezy Austin.
That transmision is a R151F ?
What’s the torque on bell housing bolts to the transmission it’s self not to the motor adapter
Man. This is not for the weekend DIY warrior that's for sure.🤣
You should do a giveaway on the truck
Hi. i love your videos. my dad has an old hilux and i wish i could restore it just like you do with yours. i have a question. which is the minimum pressure required from a pressure washer for wet blasting and remove rust and paint from old cars? thanks in advance
I need a rebuild kit for my R150F. Where do you get yours from?
What's with all the smoke on startup?
The transmission works 100% fine but you are completely dismantling it because you are what bored?lol
Sorry old mechanic of 30 plus years here I guess I would have done this when I was young and still gave a 💩🤷♂️
Well done man nice trucks.
hello Excellent explanation and thanks for sharing your knowledge. I need to change oil in my 98 manual 4x4 tacoma, I went to the agency and they only gave me 80w90 oil and they said that it applied for differential, transmission and transfer, I ask you, is that correct? Thank you very much for your comment
where do u get the mesh that u had on top of the bucket?
Just from a local steel shop!
what center console do you have in red?
That’s from a 2nd gen 4runner!
Saludo desde ENSENDA BAJA CALIFORNIA
What does he do for a living
گڈ یار زبردست لو یو فرام پاکستان 🇵🇰🇵🇰🇵🇰🇵🇰🇵🇰🙏🙏🙏🙏👌👌👌♥️♥️♥️❣️❣️👍👍
Would like to swap my automatic for a manual on my 02 2.4l
Watched the whole ad help the algorithm
Not gonna lie I saw the video title and I was like what the heck lol
hi I'm really good I'm watching you and I'm doing a land cruiser 70 I have 2.4 td and I want to advise where to buy a set of bearings for the transmission. thank you very much Michal CZ
You amazed me all the time!
what resources can you recommend so I can teach myself to rebuild that tranny as well?
You are a very smart person.....great.
I offer you 10 grand, LOL JK. Dang that was a bargain price on that rebuild kit. Good luck on the bidding war.
absolutely love the builds, and the quality, and your abilities.. and for that reason I would HATE to hear or see something happen to you... specifically your eyeballs while you're using the press. witnessed a buddies eye brake when impacted by a chunk of cast iron. emergency surgery and stitches all over it saved him, but just barely. i don't want to sound like a safety nazi but when it comes to the press.. please:)
Minta Impact wrench 1 buah yang kecil.indonesia.
Saya kontak Di instagram pak.Henpone saya tdk bisa telegram.
Доброго здоров'я привіт з Одеси Україна.
YOU'RE RUNNING OUT OF PROJECTS! Maybe Jetta content?
Nayes djob 👊👊👊👊
👍🏽🇺🇸👍🏽
Waste of time taking all the shift rails out, that thing just falls apart.
I want the Tacoma...
Goat
You can't sell the truck that made you! You'll regret it for the rest of your life
Продай мне одну машину
This right here is ALL you…not my cup of tea. Lol
I'll buy it...
Feel free to email me!
Ok
First