That was too much smoke from the exhaust pipe. Tuner called it quits after that pull. I really hope it's the turbo. Try removing the pcv valve and vent it to atmosphere. This solved my leaking turbo. Good stuff bro. Proud of ya.
@@blurrydc5 I have a rsx now just like you, I’m going to go with a precision 6262 JB most likely. My Acura Integra Caught On Fire 🔥… New Acura RSX Build ruclips.net/video/Vk4dCdLZFWY/видео.html
@@blurrydc5 i’d recommend a VSracing turbo. i have their 6262 Dbb billet turbo. Granted i haven’t installed it yet lol, but my friends have used VSracing’s turbo’s & they perform very well & hold up strong 💪🏾
change to a -3 an line with a an resistor fitting. mine is smoking to with this but someone told me to make the drain line is straight down as possible to oil pan. they sell i believe a oil feed adjustable fitting. thats my next move if it keeps smoking a bit. also a good catchcan helps to
How has it been going is the car still running? I'm looking to make around this horsepower with my project RSX TYPE-S. I really don't want a turbo with too much fabrication needed just want to install it myself. Was this one a tough install? Did you need a lot of extra welding?
I have the same kit, with a garrett gt35 turbo. It would smoke like that too. But i bought a oil resistor like a adapter pretty much and it havent been smoking since. Or else try a smaller line like -4an I believe.
i have 1050 x id 340 aem and i go return fuel line 8feed 6 return with 100 iron gasoline because we dont have e85 in my country only 95 + gasoline what hp can go with this injectors with safe duty ?
Hey bro, i have a BRAND NEW precision 6262 ball bearing turbo for sale. You say u will be looking for a new turbo and its perfect for the motor setup. Im trying to get rid of it for a good price, pm me if interested. Its never been mounted, ran or anything. Will ship and all
Nobody rebuilds these things it’s not that hard to put in new rings and bearings while it’s half way apart. It’s good insurance why cross your fingers on used parts??
This content is all gas no brakes🔥🔔
That’s how it has to be🙏
He was tuning your partial throttle response and driveability when he was cruising on the dyno .
That was too much smoke from the exhaust pipe. Tuner called it quits after that pull. I really hope it's the turbo. Try removing the pcv valve and vent it to atmosphere. This solved my leaking turbo. Good stuff bro. Proud of ya.
bro everything about this build is so sick def inspiring me it’s been a dream of mine to boost the rsx
I had the same issues with my cxracing kit
Clean build 🔥
Thats my tuner Alex and i got my nismo 350z tuned there as well uptide. Amazing numbers bro 👏
Good job hitting 400 brotha
Thank you bro 🙏🙏 I just noticed
Welcome Back Bro Haven’t Seen You Post For A While
Ima try to post as much as possible, give me ideas!!!
@@blurrydc5would love to see some interior mods
the 🐐
solid numbers!
It feels like it forsure!
Def upgrade the turbo! The eBay turbo blew up my b series lol. Never going cheap again 🤞🏾
What turbo did you end up going with
@@blurrydc5 I have a rsx now just like you, I’m going to go with a precision 6262 JB most likely. My Acura Integra Caught On Fire 🔥… New Acura RSX Build
ruclips.net/video/Vk4dCdLZFWY/видео.html
@@blurrydc5 i’d recommend a VSracing turbo. i have their 6262 Dbb billet turbo. Granted i haven’t installed it yet lol, but my friends have used VSracing’s turbo’s & they perform very well & hold up strong 💪🏾
Are you using a boost controller with the ktuner ecu?
Car sounds great brotha
Thanks bro🙏
change to a -3 an line with a an resistor fitting. mine is smoking to with this but someone told me to make the drain line is straight down as possible to oil pan. they sell i believe a oil feed adjustable fitting. thats my next move if it keeps smoking a bit. also a good catchcan helps to
Mines is straight down, please let me know if it help
Bro how did you clear your waste gate with out the hood hitting it ...... even with hood spacers it still hits
Hey man awesome build. Just wondering what the specs are those RPF1s, also wondering if you had to use spacers for them to clear the brembos.
your car is so clean bro
Clean RSX. Next do a pov pulls?
🔥🔥🔥🔥
Thanks bri
Nice build🤾♂️
Thanks bro that means alot
@@blurrydc5 😉
How has it been going is the car still running? I'm looking to make around this horsepower with my project RSX TYPE-S. I really don't want a turbo with too much fabrication needed just want to install it myself. Was this one a tough install? Did you need a lot of extra welding?
If you do full bolts on on Rsx you’ll only achieve 220-230 whp. That’s what I have now. That’s why I’m doing boost next.
Man I need to know what exhaust system you have ❤ that thing sounds beautiful
POV Drive would be dope!
🔥
I have the same kit, with a garrett gt35 turbo. It would smoke like that too. But i bought a oil resistor like a adapter pretty much and it havent been smoking since. Or else try a smaller line like -4an I believe.
Can u explain more ? I don’t understand. U talking about the turbo oil drain?
@@user-hh4hc2lt6e feed line
@@user-hh4hc2lt6e its good to route the drain line a certain way/ certain angle as well i saw it somewhere on a forum.
Will give it a try
🔥🔥🔥
🔥🔥
Sheeeesh been looking at ST’s maybe ecoboost is not the play
Adding load under low rpm I’m guessing
How where you able to apply that Honda emblem in the front what to do it for mine
Are you using all stock internals on the motor?
i have 1050 x id 340 aem and i go return fuel line 8feed 6 return with 100 iron gasoline because we dont have e85 in my country only 95 + gasoline what hp can go with this injectors with safe duty ?
Tuned on ktuner or hondata??
do you have a resonator on it
Why aren't you running a boost controller?
What exhaust setup are you running?
Where the updates at ?
Why is it smoking so much? Piston rings going to heaven?
Turbo seals
Nu uh did bro stall your car ?😂
Lol it was running like crap
Brudda what tires are you running
How the tune on k tuner
Psi?
466hp but at what psi??
wheel and tire sizes?
Clutch setup ?
Hey bro, i have a BRAND NEW precision 6262 ball bearing turbo for sale. You say u will be looking for a new turbo and its perfect for the motor setup. Im trying to get rid of it for a good price, pm me if interested. Its never been mounted, ran or anything. Will ship and all
How much for it ?lol
Vband or t3/t4 ?
@@k20luis89 its t3 with vband discharge. Looking for about 1600, i paid 1880 new, shipping not included
thought you wanted safe? lol
I’ll still smoke you 💨💨💨💨
Put down hot damn
Nobody rebuilds these things it’s not that hard to put in new rings and bearings while it’s half way apart. It’s good insurance why cross your fingers on used parts??
Rebuild it then Cratchet 😂
I got you bro bring it over here. Lol