I hope y'all liked the intro B-Roll 😎😁. I am a complete novice! Be sure to drop a 👍. Check out the Timestamps in the description above as well. Bless up every time! Complete One Bedroom Playlist: ruclips.net/p/PLyLLcCaRflgCTuP493CZuUOFdMdh-a_jc Download One Bedroom House drawing set here: forms.gle/FuJFCAcRyvQkJeYy7
Hi Edward, i cannot thank you enough for the series. I have recently discovered Autocad Architecture any quite new at it. Your video series has helped me tremendously.
You deserve a sub! I was researching how to do all of this for our final project in University because our pressor didn't teach us at all lol. Watch the series from start to finish. Loved the detailed explanations! Greeting from the Philippines
I have had three AutoCAD suites (V2014: Product Design, Building Design, Infrastructure Design - had a one-time opportunity to get them, so that I could design for "Thing", "Space", and "Place in World") for over 5 years without being able to put some of them to use. Your videos are the first ones I've seen (from anywhere in the world - including from so-called Autodesk Ambassadors) that just chewed through the whole process of a building plan in a clear and concise way. Well done - it's like the missing manual ;-).
Undoubtedly one of the best tutorials on ACA & I have seen many. Thank you for sharing. Can we please have some tutorials on Project Standards and Style & Display subjects in the near future?
Hi there. Thank you so much for the tutorials. I am learning step by step. I hope you can do an example of putting lights, materials, rendering, and animating in AutoCAD Architecture. Also if possible if you can share a tutorial on multiple floors and curved walls and one last thing if possible how to determine the floor from the wall from the ceiling or roof in multiple curved designs. Sorry for all these requests and thank you very much for taking my message.
excellent series. could you add a video of how to add a topographic survey data into a project with proper scaling. Also how to combine a two story building levels into one and make cross sections thanks
Thank u very much for your videos,but i have encountered a problem in saving edited sheet when i creat a sheets it opens a default sheet not that one i edited,any solution plz...Autocad architecture 2015
Whenever i try to open the sheet template, it just opens in model space, with no options along the bottom (ie diffferent sized sheets) and just looks like ablank drawing, with no title block or anything
I’m trying to take pieces of floor plan drawing to put in Microsoft word to make a report. Could you please make a video that instruct how to export those floor plans into image files that are clear enough to be used in Microsoft word? I have been searching for the instructions but have not seen a good one yet!
many thanks for making these vids. you have a real talent. re- inserting a camera image onto a sheet, can i help others who may be struggling. : set up a camera to get the view you want and give it a name. > then type SAVEIMG. save to wherever. Open the sheet to insert into. open directory to half window size and then drag that file onto the sheet. simples.... to insert a jpeg onto the same sheet. Click INSERT (next to the home tab) click ATTACH. find your jpeg photo and then click on the sheet where you want it to go. Important... drag out a window to the size you want it to be. otherwise nothing will appear.
Go back in to your template file and check the "file path" in your xref pallete. Sometimes it's not correct. Once you fix that, it should be loaded into all your sheets.
How did you get your new sheet template to come in? I couldn't change my template from the original default template. I'm in AutoCAD Architecture 2024.
Congratulations very good series of videos, you learn a lot. One question: if after doing this you want to make a change such as lengthening or shortening a wall, you have to do it in each plane, is it done in one and updated in all?
Hi, your videos are awesome, however can you suggest a better way of inserting google earth image into the drawing and also for editing the title block. It will be much appreciated thanks
Nice Series, good job :) i have a questions please if you can help me with that or make videos on them, How to add Custom Door Frames "Casing" also for Wall Opening & Walls Skirting + cornice & on Wall Wood Panels and False Ceiling Thanks in advance
So that's something I did off screen. You'll have to add the details in like I demonstrated in this video, from the project navigator, project settings dialogue.
@@TDVision_U I was able to figure it out. Thanks again for all your help. I just finished going through my own custom project for my class and all your videos were fantastic!!! Thank you soo much!
Hey Edward, So I'm trying to edit the metric sheet template. the Metric Sheet template for A3 seems to be different from the others. It appears in portrait orientation and is missing a couple of stuff. Does this mean I would have to recreate it to look like the others? Don't know if I'm clear enough
Hi Edward, I love your videos and I learned so much. I have one question related to this video. If I drop the views to the sheets than my views are not black and white. I have all colors inside. How can I solve this issue? I want to drop it in the sheets and if I click than I want to have only black and white lines. Thanks for your response. Have a nice day
Sounds like your layouts are using the wrong plot style. If you're using the sheet template I used in this series, you should not have this issue. Check out this video and download the sheet template from the description ruclips.net/video/yyoijSJDlfo/видео.html
In previous video, you put GRID LINES and PROPERTY BOUNDARY to Elementary Category. In this video, it has been changed to Constructs Category. The reason maybe Elementary can't be overlaid to a view. Am I right ? Tell me a bit more, please. Thanks
I hope y'all liked the intro B-Roll 😎😁. I am a complete novice!
Be sure to drop a 👍. Check out the Timestamps in the description above as well. Bless up every time!
Complete One Bedroom Playlist: ruclips.net/p/PLyLLcCaRflgCTuP493CZuUOFdMdh-a_jc
Download One Bedroom House drawing set here:
forms.gle/FuJFCAcRyvQkJeYy7
Good series... you're a good a natural teacher.
Out of the box, thanks for the educational video.
Thanks!
Welcome!
Someone give this man an award 🥇.
Creating views and detailing was my favorite
Excellent ! You are awesome! Greetings from Mexico !
Big up to the Mexican in the house.
It has been a long journey. Glad am now equipped with enough knowledge. Appreciated.
Excellent as expected! Looking forward to other videos from you to sharpen my architectural skills. Thanks again bro!
This is definitely my favorite.
Love everyone as they were very clear and informative. Must mentioned that the stairs video was a plus.
Sending you thanks from the UK, such a helpful series!
That was really great detail training 🙏🙏
I just finished this series...very nice and helpful tutorial! Thanks for putting it together.
Great job Sir Edward
Hi Edward, i cannot thank you enough for the series. I have recently discovered Autocad Architecture any quite new at it. Your video series has helped me tremendously.
That's awesome! I'm happy to know that my videos helped.
Edward's the man!
Watch all the videos in this series...Very well done. It was edifying and well presented 👍👌
Thanks man.
Thank you sir !
I have been using AutoCAD for work for only 2 weeks and your tutorials really helped me a lot !
Looking forward for new content ;)
Thank you for this playlist @TD Vision U (Edward). Its a great way for me to start my autocad architecture course. Thanks once again.
Great stuff continue thanks
Defiantly excellent video,
You deserve a sub! I was researching how to do all of this for our final project in University because our pressor didn't teach us at all lol. Watch the series from start to finish. Loved the detailed explanations! Greeting from the Philippines
Awesome! Happy you the videos helpful!
I have had three AutoCAD suites (V2014: Product Design, Building Design, Infrastructure Design - had a one-time opportunity to get them, so that I could design for "Thing", "Space", and "Place in World") for over 5 years without being able to put some of them to use.
Your videos are the first ones I've seen (from anywhere in the world - including from so-called Autodesk Ambassadors) that just chewed through the whole process of a building plan in a clear and concise way. Well done - it's like the missing manual ;-).
Thank you man! 💪 I appreciate the feedback. And I'm happy you found my videos helpful.
I saw the entire series. This was an amazing tutorial and easy to follow. Thanks bro!!
You're most welcome. Thanks for watching
very thankfull, very well done. GOood job guy
Nice
Can you make a guide video how to setting Tag room finish schedule with Height , Length, Width.... Thanks man!!
very very very awesome
Very good job man, finally I understood all the Autocad Architecture process.
Thank you! I'm glad you found the videos helpful.
Thanks for clear explanation
thank you i see you did some things i never do and it interest me a lot from now i am following you in different project you upload
THAT IS AMIZING BRU.
great job mr. edward
🔥 🔥 well done as usual bro
Undoubtedly one of the best tutorials on ACA & I have seen many. Thank you for sharing. Can we please have some tutorials on Project Standards and Style & Display subjects in the near future?
Thank you! I will certainly add those to my list.
Excellent work bro!!! Keep up the great work man. 🔥🔥🔥🔥
Hi there. Thank you so much for the tutorials. I am learning step by step. I hope you can do an example of putting lights, materials, rendering, and animating in AutoCAD Architecture. Also if possible if you can share a tutorial on multiple floors and curved walls and one last thing if possible how to determine the floor from the wall from the ceiling or roof in multiple curved designs. Sorry for all these requests and thank you very much for taking my message.
Thanks Edward, this an awesome series learnt allot
Awesome!
Thank you!!!
excellent series. could you add a video of how to add a topographic survey data into a project with proper scaling.
Also how to combine a two story building levels into one and make cross sections
thanks
Nice series, greetings from Sri Lanka
Big up to Sri Lanka! Thank you.
@@TDVision_U Looking forward for something new! keep it up
hello sir. thanks for your all tutorial, the playlist, great!. i wanna ask, when i drag the view to the sheet, there is grid. how to hide that?
Some annotations, such as Grid Labels show in my view, but do not show when I put the view onto a sheet. How do I get them to appear?
Thank u very much for your videos,but i have encountered a problem in saving edited sheet when i creat a sheets it opens a default sheet not that one i edited,any solution plz...Autocad architecture 2015
GREAT
Whenever i try to open the sheet template, it just opens in model space, with no options along the bottom (ie diffferent sized sheets) and just looks like ablank drawing, with no title block or anything
Good-day, Can you give a hint what series are you planning to do next? Know it will be highly big-up as this one or even BIGGER-BIG-UP! God Bless!
I'm working on it.
I’m trying to take pieces of floor plan drawing to put in Microsoft word to make a report.
Could you please make a video that instruct how to export those floor plans into image files that are clear enough to be used in Microsoft word? I have been searching for the instructions but have not seen a good one yet!
Great idea, I will add this to my list of future topics.
many thanks for making these vids. you have a real talent. re- inserting a camera image onto a sheet, can i help others who may be struggling. : set up a camera to get the view you want and give it a name. > then type SAVEIMG. save to wherever. Open the sheet to insert into. open directory to half window size and then drag that file onto the sheet. simples.... to insert a jpeg onto the same sheet. Click INSERT (next to the home tab) click ATTACH. find your jpeg photo and then click on the sheet where you want it to go. Important... drag out a window to the size you want it to be. otherwise nothing will appear.
Hey Edward, thanks for the videos. It was really helpful. Erm I was wondering if you take on projects (like designing projects)
I'm happy my videos helped you out. I do projects but I'm not taking on any right now. Thanks for the offer though.
Hi, Thanks for your video. But LOGO not getting copied in the other sheets. Do we need to do it manually for each sheet . Thanks
Go back in to your template file and check the "file path" in your xref pallete. Sometimes it's not correct. Once you fix that, it should be loaded into all your sheets.
How did you get your new sheet template to come in? I couldn't change my template from the original default template. I'm in AutoCAD Architecture 2024.
Congratulations very good series of videos, you learn a lot. One question: if after doing this you want to make a change such as lengthening or shortening a wall, you have to do it in each plane, is it done in one and updated in all?
Correct. If you update the construct, all views sharing that construct will update.
PLEASE MAKE MAKE SHORT LIKE TOPIC FOR EXAMPLE . HOW TO CHAGE WALL COLOUR
Hi, your videos are awesome, however can you suggest a better way of inserting google earth image into the drawing and also for editing the title block. It will be much appreciated thanks
Thank you! I will take a look into that.
Nice Series, good job :)
i have a questions please if you can help me with that or make videos on them,
How to add Custom Door Frames "Casing" also for Wall Opening & Walls Skirting + cornice & on Wall Wood Panels and False Ceiling
Thanks in advance
Thank you! I will add that to my list.
where do you go to add info into your project details. i dont remember doing that?
So that's something I did off screen. You'll have to add the details in like I demonstrated in this video, from the project navigator, project settings dialogue.
@@TDVision_U ok i get there np but you have two buttons add detail add category. what do you do get say architectural firm and its subs
Good evening sir can you please help me with room schedule of how to create it showing area in m².
Thank you
Check out my video on SCHEDULES in AutoCAD: ruclips.net/video/NK1sSn7LVlE/видео.html
Do you have a video on how to create the south 3d camera view?
No I do not. But I will do a video on that in the future.
@@TDVision_U I was able to figure it out. Thanks again for all your help. I just finished going through my own custom project for my class and all your videos were fantastic!!! Thank you soo much!
Sweet 👍
Hey Edward, So I'm trying to edit the metric sheet template. the Metric Sheet template for A3 seems to be different from the others. It appears in portrait orientation and is missing a couple of stuff. Does this mean I would have to recreate it to look like the others? Don't know if I'm clear enough
Yes you'll have to recreate or modify the current one to make it look the way you want it to.
@@TDVision_U alright, thanks brother
Hi Edward, I love your videos and I learned so much. I have one question related to this video. If I drop the views to the sheets than my views are not black and white. I have all colors inside. How can I solve this issue? I want to drop it in the sheets and if I click than I want to have only black and white lines. Thanks for your response. Have a nice day
Sounds like your layouts are using the wrong plot style. If you're using the sheet template I used in this series, you should not have this issue. Check out this video and download the sheet template from the description ruclips.net/video/yyoijSJDlfo/видео.html
how does it automatically change color for you to black and white?
because the sheet template was set up that way
Hi Edward can you make a video of a project in metric( millimeter)?
I hope to do so in the future bro. Thanks
im having some trouble with my walls showing up on the paper space
it would show up on model space but not the paper layout when adding views
Are you using the view cube to rotate? Sometimes changing the view from Conceptual to Wireframe fixes that glitch. You should try that.
how do i convert a cad drawing to black and white and save it in a PDF format
Check out this video to see how to convert a drawing to Black and White: ruclips.net/video/LnBGo6SIrCc/видео.html
let me comment b4 i watch
In previous video, you put GRID LINES and PROPERTY BOUNDARY to Elementary Category. In this video, it has been changed to Constructs Category. The reason maybe Elementary can't be overlaid to a view. Am I right ? Tell me a bit more, please. Thanks
You're correct. Elements are not available to select when you create a view. They also don't show up on prints for some reason.
More videos on double story building
how can i download AutoCAD for electrical engineering plan
Check out the Autodesk website: www.autodesk.com/products/autocad/included-toolsets/autocad-electrical
I ALSO SURGEST we do zoomorphic architecture
2-3 MINT VEDIO ONLY
Very lazy explanation