Wanted to thank you for a great vid. Helped a lot. I've been trying to get going in both soft soft and didn't get very far. TNice tutorials vid helped a
great video, I want to do smart home wiring as the the wires from switches go to a central control box and from there go to the lamp, do you have any recommendations for this, many thanks
Great great effort❤.. 1. Can one use foundation plan to do electrical plan? 2. How did you identify the location of switch for kitchen going by this plan ( I understand doors are not placed in the kitchen) 4. Is it appropriate not to show how wires run to the switches from the pannel box.
i want to access the CAD file with the electrical blocks but i cant seem to find it on your patreon page. could you offer more guidance on how and where exactly to find it?
Learning a lot by watching your video. I have a question in regards to electrical plan symbol. Is the electrical plan symbol separate drawing or do I have to create separate construct?
Thanks Eddy for this particular episode please I have a project am working on (story building ) and I want to use autoCAD to design the SLAB REINFORCEMENT DETAILS. I need your help?
@@TDVision_U thanks much your a great teacher u always inspire me to push myself and work harder, with out your lessons I don't know where I would have been today respect man continue to do the good work that god had bless you with ❤️👍🏾🇯🇲
Hi, love the lessons. Quick question I thought you weren't suppose to put duplex outlets under windows because curtains can electrical fires. What are your thoughts?
That's very good reasoning 🤔. A real electrician would probably give a better answer. So depending on the code in your area, there should be an outlet every "certain amount" of wall space distance, once the wall is not broken. Wall space can be broken by doors or tall windows. For short windows that we have on this building, a plug is permitted to go under the window. You don't have to put it there though. But since it can essentially be hidden behind a curtain, and lines up with the window, then it's probably the best place to put it, aesthetically. If the circuit was properly built, the breaker should shut down even before a fire begins.
Hola, soy nuevo con esto del autocad architecture. me gustaría saber si los videos tienen forma de traducir al español ya que son buenos y por no saber ingles siento que me pierdo muchas cosas de la explicación gracias.
Hola Yim, gracias por ver mis videos. Me encantaría tener mis videos traducidos pero no sé español. Suspendí la clase de español en la escuela secundaria, lo cual ahora me arrepiento. Necesito un traductor que me ayude con eso. Usé el traductor de Google para ayudarme con esta respuesta. A cualquiera que esté dispuesto a ayudar con la traducción, se lo agradecería enormemente. enlazame!
@@TDVision_U ok, igual sigo viendo sus videos son muy buenos, me gustaría preguntarle porque al hacer un corte en planta de mi constructs las puertas aparecen cerradas si en el representación del constructs esta abierta. De antemano muchas gracias. (autocad architecture)
Every ti a friend of mine ask to teach them how to use soft soft I share them the link to tNice tutorials YT video tNice tutorials helped so it will help
trying to learn soft so I am easily understanding everytNice tutorialng but I don't tNice tutorialnk it is for complete beginners who just opened the soft literally 5
Another informative video. A lot to grasp but your explanations makes it easily understood. Thanks
wow, I went through your videos and i saw the good works you are doing. Jamaica rocks. i have subscribed fast. big ups. more storey buildings
Great channel on RUclips 🙏
Good going Edward, keep up the good work
Blakey Don't stop making soft. I wished I started as early as you. You have a lot of years to learn!
Good demonstration
Wow ..Just Extraordinary Video..from Bangladesh..
Excellent demonstration
Great video. Very clear and concise. Respect.
thank you for sharing!
Thank you very much … I have downloaded every of your downloadable resources.
Awesome!
Thanks man ❤️
Cool,love e concept
Great video keep it up
g00d job
Great explanation
Very nice brother. I'm beginner for AutoCAD but I know that. Thank brother ❤️
Dear plz help I want to learn
But I'm confused
Kaha se kru
Online course ???
Offline ???
In the works, so stay tuned for that.
Awesome video 🙏🏽
Keep it up love from Pakistan,❤️
Bless up ma brother! Thank you!
Thank you so much
good wrk
great video
Wanted to thank you for a great vid. Helped a lot. I've been trying to get going in both soft soft and didn't get very far. TNice tutorials vid helped a
Nice
nice
great video bro! keep it up!
Hi! Could you explain how to put an alarm in the plan? I already searched on youtube and google but I just found Fire alarms
Thank you !
Nice 🥰🤩
great video,
I want to do smart home wiring as the the wires from switches go to a central control box and from there go to the lamp, do you have any recommendations for this, many thanks
Awesome as usual
i love you,bro
I am from India. U r make good ek learn full video
I took two months to learn Adobe After Effects and Premier Pro. Now I am learning soft soft to make soft so I can have more verity
Great great effort❤..
1. Can one use foundation plan to do electrical plan?
2. How did you identify the location of switch for kitchen going by this plan ( I understand doors are not placed in the kitchen)
4. Is it appropriate not to show how wires run to the switches from the pannel box.
Can u make a guide in making the electrical blocks
Do you offer any training on how to read and design electrical drawings
Unfortunately I do not.
i want to access the CAD file with the electrical blocks but i cant seem to find it on your patreon page. could you offer more guidance on how and where exactly to find it?
otherwise its top top content u have here, thanks alot
Learning a lot by watching your video. I have a question in regards to electrical plan symbol. Is the electrical plan symbol separate drawing or do I have to create separate construct?
The symbols are created in a separate drawing, outside of the project. The symbols are then brought in via the Blocks Palette.
When is the next video coming? I'm so excited to see you complete this 🤯this is so informative
Tomorrow.
And how may videos are there left? Any approx idea?🤔
2 more on this series. Many more on other stuff.
Can't wait bro...keep it up
Respect man. Appreciate it.
Thanks Eddy for this particular episode
please I have a project am working on (story building ) and I want to use autoCAD to design the SLAB REINFORCEMENT DETAILS. I need your help?
Send me an email tdvision7@gmail.com
TNice tutorials person speaks the truth, the whole truth and notNice tutorialng but the truth
I need tour help to do the plumbing and sanitary plan for a residential building ?
It's very necessary for you to do that sir.
Sir can u please provide me the floor plan so that I can edit and learn that autocad electrical
please what is the standard for dimension of (switch ,socket , main board and etc...) from ( floor ,door ,window and wall corner ) ?
Nice video, one problem is that your electrical legend pdf could not be imported in Autocad
Please can draughtman do the electrical drawings?
Good night Mr Edwards what scale in the imperial unit did you use to draw your electrical symbols?
1:1 metric, 1' = 1'-0" imperial
@@TDVision_U thanks much your a great teacher u always inspire me to push myself and work harder, with out your lessons I don't know where I would have been today respect man continue to do the good work that god had bless you with ❤️👍🏾🇯🇲
is there any specific measurements to use in creating these symbols?
Not at all. Just try to keep them proportional.
hi thanks so much . i would like to know how to create those symbols
Hi, love the lessons. Quick question I thought you weren't suppose to put duplex outlets under windows because curtains can electrical fires. What are your thoughts?
That's very good reasoning 🤔. A real electrician would probably give a better answer. So depending on the code in your area, there should be an outlet every "certain amount" of wall space distance, once the wall is not broken. Wall space can be broken by doors or tall windows. For short windows that we have on this building, a plug is permitted to go under the window. You don't have to put it there though. But since it can essentially be hidden behind a curtain, and lines up with the window, then it's probably the best place to put it, aesthetically. If the circuit was properly built, the breaker should shut down even before a fire begins.
How do draw the symbols for the electrical plan I need to know by tomorrow plz
new in autocad, so maybe silly question: are those symbols annotative? do they need to be annotative? thanks
No, they are not.
Is it possible to convert a PDF directly to AutoCad blocks
Well you can concert PDFs into lines, exploded. Then make them into blocks. I don't think you can get blocks directly.
I hope I will learn and achieve my aim .... just a learner
What is a dimer Switch?
BTW love your videos..
A switch used to adjust the lights to make them brighter or dimmer. That's the most basic definition.
Please can I get your symbols and legends in dwf format
Visit the link in the description.
@@TDVision_U they is pdf form but I want it in dwf because my Autocad version is 2008
Hey man, I tried to insert your electrical symbols pdf as a drawing but it said: "object not found". Any advice?
That's correct. You would have to google electrical symbols pdfs and grab them that way.
can I have your block in this video it really helps me a lot. ty
Those are available on my patreon page.
@@TDVision_U okay thanks for reply
I wasn't lost until he said "Control + Zed" instead of "Control + Z"
Pls wot abt the storey building I told u abt plsss
where can i purchase this software
www.autodesk.com/products/autocad/overview?term=1-YEAR&tab=subscription
sir ive been trying to open the file of different components but it opens as a picture
Great video. How do I know what size to draw the electrical blocks?
You will have to just use your discretion. Just make sure they are all similar in size.
@@TDVision_U thanks. blessings
ikr!
Hola, soy nuevo con esto del autocad architecture. me gustaría saber si los videos tienen forma de traducir al español ya que son buenos y por no saber ingles siento que me pierdo muchas cosas de la explicación gracias.
Hola Yim, gracias por ver mis videos. Me encantaría tener mis videos traducidos pero no sé español. Suspendí la clase de español en la escuela secundaria, lo cual ahora me arrepiento. Necesito un traductor que me ayude con eso. Usé el traductor de Google para ayudarme con esta respuesta.
A cualquiera que esté dispuesto a ayudar con la traducción, se lo agradecería enormemente. enlazame!
@@TDVision_U ok, igual sigo viendo sus videos son muy buenos, me gustaría preguntarle porque al hacer un corte en planta de mi constructs las puertas aparecen cerradas si en el representación del constructs esta abierta. De antemano muchas gracias. (autocad architecture)
Can you share your electrical blocks?
Please tell me how to Draw internal wiring
Unfortunately, I do not have enough electrical experience to teach that.
Bro can i have the dwg file for the electrical symbols pleaseee
please can u download the architect drawing . thanks
Please can I get the tutorial from thee beginning sir
hello broda i dont know anything how can i start
ITS HELPED ME ..ONE QUE. CAMARAS CONNECTING LIE ?
Show has how to draw the symbol
🇯🇲🇯🇲🇯🇲🇯🇲🇯🇲
I watched tNice tutorials video and now I'm doing quarantine vids with Richard D. Jas and doing a lot of cocaine.
Download software AutoCAD 2021
Bell indickitre instalishn
Every ti a friend of mine ask to teach them how to use soft soft I share them the link to tNice tutorials YT video tNice tutorials helped so it will help
Please where is the pdf
Check the link in the description.
can u send me the link of the symbols so i can download them? btw nice video very helpful
Thank you. These are available on my patron page if you need to download them.- www.patreon.com/tdvision
Great video but how do I know what size to draw the blocks?
You'll have to just draw them at a comfortable size, I would say. Try to keep them uniform in size.
dude did you have that file in a dwg format. ty
Ok
trying to learn soft so I am easily understanding everytNice tutorialng but I don't tNice tutorialnk it is for complete beginners who just opened the soft literally 5
that marijuana
Nasty charge never said it did but ok
Ngunitv
The slower you put the video the more northern you soft ahahahahah
Sa
distort it
Great explanation