WoW. Very good job. Please may you share how you have implemented the relè mux to switch between the two cams? Moreover, please may you share more on the remote power?
Sir, Does your steering works like a real tank (one stick for left track and another for right)? If so, can you advice me of the parameters setup, please.
Hi, very nice project. I have done simple arduino car with Adafruit motor driver shield and also used one other motor shield for 2 dc motors. I need to use APM 3.1 with same motor shield or driver, can you please share your idea how to connect APM with Arduino motor shield? Thanks
Rafael Villegas By Arduino UNO and Saberthoot board. The Arduino UNO read PWM signals from APM (two signals, one for rigth and one for left skid) then read the two mouse used as encoder (the shaft encoder are connected to the engines reduction gearbox), then calculate by PID the power to apply on each motor (PID) and send power command on serial to saberthoot, the repeat this steps at about 25 Hz.
Hi.. I use an arduino uno to read pwm signasl coming from APM and then use a PID Algorithm to control the two engines bi the saberthoot. The saberthoot is controlled by serial commands. Giangi998
That 690l SeaWolf security cam is still the best fpv cam ever made...
WoW. Very good job. Please may you share how you have implemented the relè mux to switch between the two cams? Moreover, please may you share more on the remote power?
Sir,
Does your steering works like a real tank (one stick for left track and another for right)? If so, can you advice me of the parameters setup, please.
Where is that Track unit from thats an amazing build. Would love to find tracks like that
Hi, very nice project. I have done simple arduino car with Adafruit motor driver shield and also used one other motor shield for 2 dc motors. I need to use APM 3.1 with same motor shield or driver, can you please share your idea how to connect APM with Arduino motor shield? Thanks
From what toy did you get the gun from?
Good job. To control the direction, as you did to connect the two Motors to APM ?.
Rafael Villegas
By Arduino UNO and Saberthoot board.
The Arduino UNO read PWM signals from APM (two signals, one for rigth and one for left skid) then read the two mouse used as encoder (the shaft encoder are connected to the engines reduction gearbox), then calculate by PID the power to apply on each motor (PID) and send power command on serial to saberthoot, the repeat this steps at about 25 Hz.
Ok..I saw that you programmed with Arduino Uno re to change direction changes
Hi..
I use an arduino uno to read pwm signasl coming from APM and then use a PID Algorithm to control the two engines bi the saberthoot.
The saberthoot is controlled by serial commands.
Giangi998
good! I made a big one!