MAZDA 6 GL GHOST TOUCH SCREEN FIX CRAZY "MAZDA CONNECT" MULTIMEDIA HEADUNIT
HTML-код
- Опубликовано: 24 июл 2024
- MAZDA 6 GL 2016 AUSTRALIA RIGHT HAND DRIVE SEDAN WAGON
MULTIMEDIA GHOST TOUCH SCREEN FIX MAZDA CONNECT
FM RADIO CHANNEL STATION IS CHANGING BY ITSELF
NAVIGATION IS STOPPING OR CHANGING BY ITSELF
THERE IS A GHOST IN THE CAR MAKING CHANGES TO MULTIMEDIA INPUT
THE PHANTOM TOUCHES REQUIRE DICONNECTION OF THE TOUCH SCREEN SO THAT ONLY THE CAPTAIN ROTARY DIAL KNOB BUTTON CAN BE USED TO CONTROL SATNAV AND MULTIMEDIA INFOTAINMENT FOR MAZDA CONNECT
TIMECODES
0:00 TOOLS REQUIRED FOR JOB
0:55 REMOVE DASH FROM CAR
3:20 UNDO MAIN BOLT HOLDING MULTIMEDIA TO CAR
4:55 POP MULTIMEDIA CLUSTER FROM DASH
5:40 REMOVE ALL CABLES
7:12 REMOVE SCREEN FROM MULTIMEDIA CLUSTER
10:25 OPEN SCREEN UP
10:45 REMOVE RIBBON CABLE
11:15 REVERSE ALL STEPS
12:32 INSTALL MULTIMEDIA CLUSTER CABLES TO CAR
13:00 INSTALL MULTIMEDIA CLUSTER 10MM BOLT
14:00 CLIP DASH BACK IN 
Развлечения
This video helped me out so much and got it all done in an hour or so. You’re the man!
Yes it’s a nice 1 hour job and once it’s done you can really enjoy the radio and the navigation again. Enjoy your car again. Well done!
Bloody ripper video mate, thank you so much!! I'm going to give this a try, sounds like I have exactly the same problem.
No worries but just want to mention a couple of mistakes I made. Instead of starting in the passenger side it’s best to start with the drivers side and remove the small cover over the speedo first to make trim removal easier. And then other mistake I made was disconnecting the first switch. I was using pliers but probably just needed to push on the tab with a screwdriver or tent peg so you don’t mangle the plastic if that makes sense
@@inzp3ctor makes complete sense mate, I’m literally trying to disconnect that switch right now 🤣 Good timing 👌
Thank you so much!!! The ghost was driving me insane! You saved me 800 dollars!
That’s great news!
Holy hell! Thank you!!
You're welcome!
I just did this last week and it fixed all the issues ..... HOWEVER!! Doing this will disable the navigation system.. Also there IS A SERVICE BULLITON on this where MAZDA will replace the screen. If you have done the above procedure MAKE SURE you reattach the cable before you bring it to the dealer!!
Disable the Nav? This fix makes the nav usable again. Is yours Mazda 6 GL 2016?
There is no bulletin (recall) here in Australia. I assume you are in USA?
Yes good point about reattaching. Don’t want Mazda to know you care about money and functionality. Let them pretend you are rich and confused
Did you put the reattach the ribbon cable? Glad I found this video.
Correct, unplugging the ribbon cable is all you need to do to enjoy your multimedia navigation unit
I bought i new screen digitizer touch from aliexpress for 13 dollars and that solved my ghost touch and functionality touch
great tip here, thanks for sharing! if you love using touch screen, that is a great solution!
Any chance you can link the digitiser screen you bought? I'm having no luck finding a Mazda Specific one.
Please send me a link for mazda 6 7’ screen
@@inzp3ctorwhat mazda do you have?
@@ananislam8943 in the video click on MORE and the description will open up and you can read all the details about my car and there are some photos of my GF there too
Interesting! How is this not a recall? I have the same issue and dealer wants $500 but I don't know if I'm comfortable taking the dash apart. Sigh. Thanks for your video.
I think there is a recall in the USA but not Australia. That’s poor form from Mazda. I cut my hand once. I should have used better tools. It’s doable. If you’re not comfortable don’t do it
Where did you find the replacement screen ? Do you have a link ?
Where do you live? I’m in Australia. I found this screen in front of me on the dash, a bit to my left. But if you are in America it won’t be there. It will be in front of YOU on the dash, a bit to your RIGHT. Also if you watch the entire video instead of skipping the beginning you will instantly see where the screen is in the car that I recycled. Hope this helps, together we can beat the ghosts if we combine our power!!!
Yes I’m in America. For my car I needed a replacement digitizer with the ribbon cable however I don’t think the sell the one I need here. I’ll have to order a used screen instead of just that digitizer. Mazda doesn’t sell it for the 6’s in America for this generation. Thanks mate !
I'm in Australia too, can I please ask where I can find where to buy the Mazda 6 screen digitizer? I can only find Mazda 3, CX5 and cx9 on AliExpress for a reasonable price and it's killing me!
Is it the 36 pins ribbon cable or 50?
10:40 shows what I did
@@michaelinzitari i saw it but im asking about the number of the pins, is it 36 or 50?
would be 50 pin for GL 2016-2018@@mohazmi884
Who doesn't like a Mazda
I grew up ignoring Mazda. I only liked Hondas and Toyotas. But after my GFs Golf broke down too many times she wanted a Mazda because they look like BMWs. Who am I to argue with that. Now we are hooked
@@inzp3ctor I think they are great value. I had a Mazda 323F ZXi with a 2.0L V6 for a while and it sounded great. Was only about £650 as well.
Wow that’s cheap!! We had a 3 then changed to the 6 a couple years later. Just wondering if I want the turbo 4cyl but don’t want to sacrifice the amazing efficiency
Great video, I have same issue, now I can fix it!!
so glad this video helped you@@Wansky006 some people are telling me fixing things yourself is crazy because the dealership can do it for you. but these people have too much money.
I have a 17 mazda 6 gt and I'm in N California. Mine just started doing this ghost touch. So annoying. Is there a screen available for a 17???
Yes you can buy just the digitiser from china, like AliExpress if you want to maintain the ability to touch the screen. This video is about disconnecting the digitiser from the display and using it like a traditional monitor