Yeah so I didn’t feel like going this route, but I installed an exhaust on my car and then the pipe was angled to where it aimed at the plastic part of the valance and it burned. But now that I’m going to get a new piece and real tips I hopefully won’t have that issue again, thanks for making the video man!
Did you pay a $100 core charge when you ordered this part? (Rear valance) when I used the link and tried to purchase is there was an additional $100 core charge
I found that part number on eBay and checked vendor to verify fitment. They said it wouldn’t fit. Are you sure the holes and snaps match up to stock bumper? I have a 2015 RT.
They say it won't fit because it's not quite a "direct swap". I always thought the stock rectangle tips were just a piece of trim attached to the valance but they are actually riveted to the frame/bumper. It's simple enough to remove them but it just means you can't take your valance off then immediately put the pursuit valance on. Once you remove the stock tips though it will fit.
Hey how durable are these exhaust tips? I'm sure you've had them on for a while, I'd love to hear your feedback on these so I can know whether or not to get them. Has the black finish peeled or faded at all?
Nope! They’ve held up very well. Haven’t faded or anything. The only damage they have is from when I lowered the exhaust and scratched them a little on the concrete. Other than that, I give 5 stars
@@DonnySRT bro the fucking valance cutout around the top started to melt! Part is the same as yours and the tips are the same, you have any issues with that? There is room between the valance and the tip so it's not like they're rubbing either
Yoo love the video!! I just got the same car as you RT. Got a quick question about the Valance. When you order the part they have a core charger. Did you get refund afterwards?
Thank you! I never sent my original one in so I ate the core charge. I wasn’t sure that you were allowed to send the original one in because it’s technically a different part number. I might be wrong though
I got a 2019 charger sxt with the rectangular shape tips similar to 2015-2019 sxt and 2015-2017 rt. Was this a straight bolt on after you modified your exhaust and made it round?
DonnyR/T I’m getting bolt on tips. Still 2.5? And how long should I get the tips as in how much they stick out the diffuser. Sorry for all the questions 😂😂😂
@@NOLEFAN16 No worries my man. With regards to the length of the tip, it really depends. Im not sure how long the pipe is that they replaced your resonators with. Typically, Im against "bolton" tips because people can steal them. If you can, I would still get them welded on. Then the shop can cut the 2.5 piping back if it's needed
I agree, man. The stock exhaust tips on both Challengers and Chargers are really crappy. I've been looking at dual tip exhaust to change it up but haven't had the chance. These look way better than those weird ass boxes hahah
I have a question ur borla s type is after the x pipe and the rear is straight pipes right cuz i am thinking to put rear cut outs muffler along with s type
any weird noises from sound ?
The photo looks different 🤔
Helped a lot thanks bro !
I payed 65 for the Diffuser on Ebay I just looked for the Pursuit Diffuser.
He must have gone to Dodge.........
www.rockauto.com/en/catalog/dodge,2015,charger,3.6l+v6,3308870,body,valance+panel,820
EGDOD
Yeah so I didn’t feel like going this route, but I installed an exhaust on my car and then the pipe was angled to where it aimed at the plastic part of the valance and it burned. But now that I’m going to get a new piece and real tips I hopefully won’t have that issue again, thanks for making the video man!
Good job thanks for the intel I have a 2017 Charger base model se it fits perfect thanks a lot
Glad it was helpful bro
do you know how to find one for quad tips? it is a pain in the but
Good stuff appreciate all the info and links....very nice charger 👍👍🏽
Thank you! Hopefully the video was helpful
@@DonnySRT yes sir subbed
Looks good bro, I added quad tips on my 2016 RT and it looks cool
Nice man! You'll have to post up some pics of em! I bet the quad tips look sweet 👍
Sound any different by just changing the tips out? Thank you for the info btw!
Not really but I also deleted my resonators at the same time
So $100 core charge is pretty rough.
I’m not sure what you’re asking
Did you pay a $100 core charge when you ordered this part? (Rear valance) when I used the link and tried to purchase is there was an additional $100 core charge
Yes I did
@@DonnySRT did you get the charge refunded or have ti eat it?
I just ate it
I found that part number on eBay and checked vendor to verify fitment. They said it wouldn’t fit. Are you sure the holes and snaps match up to stock bumper? I have a 2015 RT.
They say it won't fit because it's not quite a "direct swap". I always thought the stock rectangle tips were just a piece of trim attached to the valance but they are actually riveted to the frame/bumper. It's simple enough to remove them but it just means you can't take your valance off then immediately put the pursuit valance on. Once you remove the stock tips though it will fit.
With this work with a dodge charger rt 2015 plus bro?? Personally i don't like the squary exhaust bro (not blacktop package)
Where did you get the part from
Hey how durable are these exhaust tips? I'm sure you've had them on for a while, I'd love to hear your feedback on these so I can know whether or not to get them. Has the black finish peeled or faded at all?
Nope! They’ve held up very well. Haven’t faded or anything. The only damage they have is from when I lowered the exhaust and scratched them a little on the concrete. Other than that, I give 5 stars
@@DonnySRT I appreciate the reply brother, thanks so much for the feedback
@@DonnySRT bro the fucking valance cutout around the top started to melt! Part is the same as yours and the tips are the same, you have any issues with that? There is room between the valance and the tip so it's not like they're rubbing either
How much is to get the tips installed?
Jay D you can do it yourself easily
Yoo love the video!! I just got the same car as you RT. Got a quick question about the Valance. When you order the part they have a core charger. Did you get refund afterwards?
Thank you! I never sent my original one in so I ate the core charge. I wasn’t sure that you were allowed to send the original one in because it’s technically a different part number. I might be wrong though
@@DonnySRT Yeah i see. that make sense. got it thanks!
I got a 2019 charger sxt with the rectangular shape tips similar to 2015-2019 sxt and 2015-2017 rt. Was this a straight bolt on after you modified your exhaust and made it round?
I did it the other way around. I put the diffuser on first and then went to get the tips put on
@@DonnySRT oh ya that's what I meant hehe
Then yea u should be good. Just make sure to get those replacement rivet thingys
I had my resonators deleted and replaced with 2.5 inch straight pipe. Should I still get the 2.25 inch inlet tips?
In your case, go with 2.5
DonnyR/T I’m getting bolt on tips. Still 2.5? And how long should I get the tips as in how much they stick out the diffuser. Sorry for all the questions 😂😂😂
@@NOLEFAN16 No worries my man. With regards to the length of the tip, it really depends. Im not sure how long the pipe is that they replaced your resonators with. Typically, Im against "bolton" tips because people can steal them. If you can, I would still get them welded on. Then the shop can cut the 2.5 piping back if it's needed
DonnyR/T oh yea you’re in Cali, everyones a gang member therr
I agree, man. The stock exhaust tips on both Challengers and Chargers are really crappy. I've been looking at dual tip exhaust to change it up but haven't had the chance. These look way better than those weird ass boxes hahah
Seriously man 😂😂. How's the R/T treating you?
@@DonnySRT Hasn't failed me yet. Car is a tank hahah
@@SouthTXMojave These things are beasts. Gotta love em 😂
A must do mod! Well done. Like #6
I have a question ur borla s type is after the x pipe and the rear is straight pipes right cuz i am thinking to put rear cut outs muffler along with s type
Yea that sounds correct
Hay man I’m looking for tips now and your saying that 2.25 would have been better fit?
Yea man, I initially purchased the wrong ones. The correct size is 2.25
Oh ok ok. Thanks man.
@@DonnySRT what size inlet should I get? I still have resonators.
I’m getting 5 inch tips.
The big boys! They'll look great
Yo did it fit with the 5in tips
You should debadge
Does this valance fit the sxt charger too?
It depends on which packages your car has. If your rear bumper matches mine exactly, it will fit
Anywhere else to find the valance that ships to Canada
I would try the site I have in the desc. They should have international shipping
The 2.5 fit good? Or the 2.25 to 4inch?
Go 2.25
@@DonnySRT thanks my dude
So I have a question, so you had the oval rear valance, and put this one on, my rt I bought a rear valance and it didn't fit
Is the one you bought the same EXACT one I have? You might have bought the SRT one instead