I wanna do this to my 97 extended cab. id love to see the bracket for the seats. Blueprint wise, placement of the oem mounts and where the new ones mount on the bracket.
I had a spotless 96 crew cab long bed F350 with a 7.3 and a 5spd, clean and I mean clean. The only real reason I sold it was I started missing the newer style creature comforts. Now I see guys doing this or like what DeBoss Garage did and really kick myself in the ass for selling that truck.
Dude, I love your videos. I’ve been subscribed for a long time, back in the “stab in cabin” days. I have a 68 fb mustang that I have swapped an 07 Shelby gt500 drive line in. I’d love to have you come sort out that harness. I know you’d kill it. And clean! Great work, Man!
Some really cool stuff here. I like what you did with the fronts and console. Thanks for the ideas and information My newest truck is a 96 f350 7.3 crew cab dually. Perfect all around…except the interior makes your old one look brand new. I’d even settle for the interior my 06 has.
I just picked up a 92 f250 7.3 idi out of South Carolina and I’m making my list on a complete overhaul on interior. Would this work like it did for yours? Also this video is hands down Awsome on the information you gave us going step by step.
Nice to meet a IDI brother. I bought a 94 7.3 idi Turbo about 2 years ago and have been working on it off and on. Now it looks brand with all chrome bright work replaced new bed and had it painted the original Jewel Green metallic. The truck looks brand new. I will say this. Though the truck needed a lot of work it had just had a new trans installed and the engine ran strong as heck. It set for a long time while all the bodywork was being done, but once complete I encountered a problem. I could take off from a start and 500 feet down the road it would cough and stall. If I waited 2-3 minutes it would start again. I couldn't for the life of me figure out why this was happening. I had never worked on a diesel before. I took it to several places and they didn't want to touch it. So I had to learn myself. I found an air intrusion in the fuel filter top where the heater heats the fule. That problem was solved with a 3 cent oring. That helped but didn't solve the problem. I ran clear tubing on the fuel lines to make sure there was no more air in the lines. I now checked all the fuel lines back to the 2 tanks and couldn't see a problem. I then decided to remove the bed to access the fuel feeds, in the tanks and discovered that the filters on the fuel pickups had completely dissolved and I saw little black chips of plastic in both tanks that were getting sucked into the fuel feeds., and causing the total problem. www.amazon.com/4C4Z-9365-BA-Fuel-Strainer-Powerstroke-E5TZ-9J306-BA/dp/B083Q4H759 If you ever have a problem this could be it. They send you two long strainers with it I have no idea what they are used for. They list these for powerstroke but they are the same for the IDI 7.3 as well. The problem was solved for under 20.00 These engines can last for 4-500K if you take care of them. Good luck to you Bro
I have the 11 to 16 vinyl seats in my truck. Matches perfect to the Grey interior. I want to do the full console one day because I love those consoles. Yours looks great other than the gap in the dash. I'll get one one day and find a way to match it to the dash seamlessly. All in all though, great video. Learned a great deal and got some great ideas!
Very nice install. I know some others have asked, but could you point us to the source of the wiring harness? Cables and fuse blocks, etc. I've searched but I'm having trouble finding something like that. Apologies if its posted already and I just missed it.
I’m looking to do something similar in my 03 f350 regular cab dually that has a bench seat with the manual adjustable slide to move it forward and back. I’m looking to put a black heat and cooling rear seat from a 17-22 platinum into my truck. But I’m planning on trying to swap the platinum rear seats onto my 03 bench seat sliding frame. I’m thinking of bolting the platinum seats to the 03 seats or make some plates to bolt them together.
Hey man I’m not gonna lie I really need help right now, I’m puttin 2012 king ranch seats in my 1999, I got the driver side all hooked up and working from ur video, I figured the passenger side was the same thing to cut all the plugs and look at ur diagram to hook up the wire and get power from switch to the motors but the colors aren’t the same on the passenger side I need help 😊
Great install by the way. I was just thinking of putting 03-06 seats in my 98 Expedition because they are allegedly a direct bolt in, but now I'm thinking I may do something like you did.
Muy buen trabajo amigo tengo una f350 1997 y le puse de los mismos asientos platinum pero no supe cómo iban las corrientes para Aser fusionar me podrías ayudar con ese dato graisias
is the sound deadener you use or the combos of more then one that you use do it top secret or something? I'm running out of time and will be ready to reinstall the dash soon and liked how much burnt toast quieted down and iv asked like 5 times now even in the newest videos or if you talked about it in a video witch one was it? you started in toast then skipped it lol. im deleteing the last post so theres not 2. thanks for sharing
I have 97 crew cab I intend on doing this to my truck my question for you is on mine I believe to put it in 4wd low you have to press in on the shifter how did you by pass that?
I see in all your videos so far you put the 08-16 mirrors on the 99-07 trucks. Are you working on a way to put the 17- present mirrors on? I know it can be done but I'd rather buy a plug and play kit rather that figure it out my self.
05+ can fit the 17+ mirrors on plug and play, it’s the older trucks 99-04? that your mirror lights won’t work but everything else will, obviously besides the extend and fold features, which you’d need the 08+ door panels for anyway
I wanna do this to my 97 extended cab. id love to see the bracket for the seats. Blueprint wise, placement of the oem mounts and where the new ones mount on the bracket.
This looks really clean. Its well thought out and you did a nice job of making everything fit and work together.
Been wanting to do this in my crew cab, and upgrade from the bench seat but wasn’t sure of the alignment so thanks for this vid.
Nice job!! I like to do my f250 7.3 96 model. You are a wizard to the electric stuff!! Nice and clean .
Your OBS videos are my favorite. Can't wait to see what you do to her next. Very entertaining!!
That is so cool! My dad had a 97 350 single cab in green, was awesome. One day id love to do this in memory of him. Fun build
The attention to detail is what I love about your work
What led bulbs as in brand for interior
better get a gps locator on that truck. Looks awesome
Hey bud you still in Vegas or in Fla. Still looking for grey 13-16 crew seats for my 99. Thanks man. That truck has come a long way. Great work.
I had a spotless 96 crew cab long bed F350 with a 7.3 and a 5spd, clean and I mean clean. The only real reason I sold it was I started missing the newer style creature comforts. Now I see guys doing this or like what DeBoss Garage did and really kick myself in the ass for selling that truck.
Thank you very much for this video. I did this with my '97 crew cab. I used the '16 rear seat also.
I’m gonna be doing this with a crew cab OBS can’t wait!
that is sweet!!!!
my family hauler is a 14 ford but my work truck is a 99 cummins, I think a pecan brown platinum interior would look sick in it!!!!
Always learn something new from your videos! Thanks Zach for all you do making your videos and I look forward to your next video!
I have a 96 f150 xl with no seats but this looks awesome thanks for the video
Dixie is a sexy ride!!
Long Live Axle!!
Dude, I love your videos. I’ve been subscribed for a long time, back in the “stab in cabin” days. I have a 68 fb mustang that I have swapped an 07 Shelby gt500 drive line in. I’d love to have you come sort out that harness. I know you’d kill it. And clean! Great work, Man!
Some really cool stuff here. I like what you did with the fronts and console. Thanks for the ideas and information
My newest truck is a 96 f350 7.3 crew cab dually. Perfect all around…except the interior makes your old one look brand new. I’d even settle for the interior my 06 has.
I just picked up a 92 f250 7.3 idi out of South Carolina and I’m making my list on a complete overhaul on interior. Would this work like it did for yours? Also this video is hands down Awsome on the information you gave us going step by step.
Nice to meet a IDI brother. I bought a 94 7.3 idi Turbo about 2 years ago and have been working on it off and on. Now it looks brand with all chrome bright work replaced new bed and had it painted the original Jewel Green metallic. The truck looks brand new. I will say this. Though the truck needed a lot of work it had just had a new trans installed and the engine ran strong as heck. It set for a long time while all the bodywork was being done, but once complete I encountered a problem. I could take off from a start and 500 feet down the road it would cough and stall.
If I waited 2-3 minutes it would start again. I couldn't for the life of me figure out why this was happening. I had never worked on a diesel before. I took it to several places and they didn't want to touch it. So I had to learn myself. I found an air intrusion in the fuel filter top where the heater heats the fule. That problem was solved with a 3 cent oring. That helped but didn't solve the problem. I ran clear tubing on the fuel lines to make sure there was no more air in the lines.
I now checked all the fuel lines back to the 2 tanks and couldn't see a problem. I then decided to remove the bed to access the fuel feeds, in the tanks and discovered that the filters on the fuel pickups had completely dissolved and I saw little black chips of plastic in both tanks that were getting sucked into the fuel feeds., and causing the total problem. www.amazon.com/4C4Z-9365-BA-Fuel-Strainer-Powerstroke-E5TZ-9J306-BA/dp/B083Q4H759
If you ever have a problem this could be it. They send you two long strainers with it I have no idea what they are used for. They list these for powerstroke but they are the same for the IDI 7.3 as well. The problem was solved for under 20.00 These engines can last for 4-500K if you take care of them. Good luck to you Bro
dude your truck kicks ass. nice bro I wanna do the same thing in my 92
This is a awesome walk through video of superduty seats and center console, you did a wicked job and thanks for this
I have the 11 to 16 vinyl seats in my truck. Matches perfect to the Grey interior. I want to do the full console one day because I love those consoles. Yours looks great other than the gap in the dash. I'll get one one day and find a way to match it to the dash seamlessly. All in all though, great video. Learned a great deal and got some great ideas!
Great video, you have an amazing talent!
I want to do this to my 1997 E-350 7.3 extended van.
Think it's possible?
Thanks, keep the videos coming!
Not sure i don’t have any experience with Vans but I don’t see why not if you can get them mounted
❤ The upgrade
Those seats and console would look great in my 01 F350 dually if you get tired of them …I know I’m tired of the old man tan
Very nice install. I know some others have asked, but could you point us to the source of the wiring harness? Cables and fuse blocks, etc. I've searched but I'm having trouble finding something like that. Apologies if its posted already and I just missed it.
Great install brother ! Super clean I would love to do this to my 99 crew cab 7.3
Since you have a '99, it *should* be a direct bolt-in
Inspiration bro, looks awesome.
I really learn a lot from your channel about OBS
What size fuses you using for the seats?
They look good as hell 💪🏼
30amp each seat
She’s a beauty! ❤🙏
Really looks good... Great job man!!
Highly recommend the black vinyl/rubber floor
I’m looking to do something similar in my 03 f350 regular cab dually that has a bench seat with the manual adjustable slide to move it forward and back. I’m looking to put a black heat and cooling rear seat from a 17-22 platinum into my truck. But I’m planning on trying to swap the platinum rear seats onto my 03 bench seat sliding frame. I’m thinking of bolting the platinum seats to the 03 seats or make some plates to bolt them together.
Awesome!! Dixie is looking Fancy!👍😉💪
Awesome I just subscribed to your channel ,I have a1997 OBS. Where can I get 11-16 Ford seat and what should i expect to pay ? Thanks
What is needed to make heating and cooling functional? Thanks for any help love the videos !
I would like to see a 16 dash in there. I am in the planing gathering stage with mine. Try to figure out dash and door panels
Hey man I’m not gonna lie I really need help right now, I’m puttin 2012 king ranch seats in my 1999, I got the driver side all hooked up and working from ur video, I figured the passenger side was the same thing to cut all the plugs and look at ur diagram to hook up the wire and get power from switch to the motors but the colors aren’t the same on the passenger side I need help 😊
Wow those seats look great in there nice job
hurts my heart you left the back seat i’ve been looking for a full pecan interior for MONTHS 😢😢😢😂
Love the videos, where did you get the heated/cooled rocker switches?
Nice job on the seat 💺
I need that wiring video lol
What an upgrade for the old girl
New subscriber love what you doing man!!!
Really wanna do this to my 96 bronco i currently have some cheap Amazon racing seats and they just destroy my back on long drives
Great install by the way. I was just thinking of putting 03-06 seats in my 98 Expedition because they are allegedly a direct bolt in, but now I'm thinking I may do something like you did.
Looking sharp.
you should sell this as a service for people! i know i would be interested!
subbed because you do stuff just as good as it needs to be without bitchin about everything.
rock on 🤘🏽
Do you still have your old seats? I'm looking for a set like the ones you pulled out. Let me know. thanks...
You should give a list of the parts and fuse sizes
Another awesome job!
Muy buen trabajo amigo tengo una f350 1997 y le puse de los mismos asientos platinum pero no supe cómo iban las corrientes para Aser fusionar me podrías ayudar con ese dato graisias
Well done!
Hey Zach did you have to build the seat harness or did you leave them stock and built a harness to hook up to them?
Where did you get your switches and Fuse distribution block? Could you include a link to all the parts you used please (:
is the sound deadener you use or the combos of more then one that you use do it top secret or something? I'm running out of time and will be ready to reinstall the dash soon and liked how much burnt toast quieted down and iv asked like 5 times now even in the newest videos or if you talked about it in a video witch one was it? you started in toast then skipped it lol. im deleteing the last post so theres not 2. thanks for sharing
The First Layer is FatMat Sound deadner i get off amazon and then i use this stick pad on top of the deadner-----> www.ebay.com/itm/263311645936
I have 97 crew cab I intend on doing this to my truck my question for you is on mine I believe to put it in 4wd low you have to press in on the shifter how did you by pass that?
CPaddict makes rails to install the Newer Seats with
Do you work on chevys also ?or just fords
You killed it
Currently doing this in my truck , what kind seat belts did you convert to to fit the Super duty seats ?
Man make me wanna so do this on a 10th gen f150 it would be so cool
Nice job. Very nice
Great video man thanks!!!
Yo this dude is so smart
I see in all your videos so far you put the 08-16 mirrors on the 99-07 trucks. Are you working on a way to put the 17- present mirrors on? I know it can be done but I'd rather buy a plug and play kit rather that figure it out my self.
05+ can fit the 17+ mirrors on plug and play, it’s the older trucks 99-04? that your mirror lights won’t work but everything else will, obviously besides the extend and fold features, which you’d need the 08+ door panels for anyway
Mr Zach, what's the newest seat year can I install on a 96 f350.?.I'll be doing the same brackets as you?
Assuming there is no issue with the airbags being in there and that your harness doesn't power them in any way?
I have the same exact truck but white I’m doing this
Where are you located. I need my 94 Bronco interior done.
I love that but would they look better black?
Yeahhh but I got these for like nothing after some trading so figured why not
Dude! Whered u get that overhead center console??
Any way you could build all the wires and seat brackets so i could do the install myself?
What battery cables do you have on this truck? or did you make them?
How did you mount your Hydra Tuner controller? Do you have any videos? Or an Instagram? Thanks...
When you had the seat out you should have taken the carpet out and pressure washed it
What’s the brand on your fuse box (power distribution system)?
Super nice.
Where can I get that exact power distribution setup
so you can bolt any seats on on any f150 model and year?
Where did u get the switches for the seats and inverter
What is your plan for the stock seats?
Have ever tried to install 2015 center console in a 2009 f150?
Obs solutions makes seat brackets and all kinds of stuff for obs trucks. If anyone is interested
You still have the old set?
Badass
How do I get ahold of you about purchasing?
What type of drill bits did you use?
Did you already sell your old seat?
Do you still have the original seats?
Where can I find those seat Rocker switches?
Where did you get the cables for the fuse block?
I have a 04 6.o do you have any upgrade videos for a 6.0
Where do you get new seats from ?
What are you doing about the seatbelts?
Where can I get some of that thick wire?
I like the state brother
Where ya been dawg?!