With the crazy prices of new trucks (between 60 and 100K) today, it's better to outfit an older truck that's in great shape. I am updating my pristine 2004 Super cab 4x4 F150 with low miles to have all the bells and whistles of a new truck. Total expense will be under 6k. Well worth it.
I’ve had two and i sold both there’s something missing with reliability and technology. It’s great but never consistent. Old trucks just work and cheap to fix you don’t need flash or update anything if it gets replaced and I had hard time justifying an 800 dollar tail light for my F150 and Ranger in case something happened lol the prices on those parts is insane
I've gone through a couple of these over the years. Definitely a must. The only advice I can offer is; Make sure you get one with plenty of space between the head unit, and screen. The bigger screens will hit the bezel if you tilt them in your direction to see better. My new has screen rotation, so I can switch orientations. Gives more clearance, but covers the a/c controls 😑 Great video! Wish this kind of content was available years ago. It's always harder when you have to figure it out yourself 😅
I just looked at a truck a couple days ago, started looking at radio systems and came across this unit, thankyou for showing it off so I can get a good idea of it, high key I'm hooking a gamecube or ps2 to it lol
I like video. I can't wait to show this to my boy. He loves the classic F series and Mustangs. Thanks for this simple video showing how a little tech can be added to any 12v power supply. Good job.
A little tip for using those radio removal tools in the future, should you ever need to. When you’re pulling the radio out, pull the tools away from each other. That will cause the ends of the tools to push towards the sides of the radio and make them less likely to pop out.
@@budjiman1 the sound is mostly dependent on your speakers, I'm sure you know that already but any radio is gonna practically be the same these days as far as sound quality goes
Good job ! I’ve been thinking about installing one also! As for your seat just buy a memory foam seat cushion , I did because you’ll have a hard time finding a matching seat! My interior is the same color as yours ! Drivers side panel is cracked and needs replacing again no luck finding one! Also good to see your truck is a standard 7.3 like mine keep on rolling!
Thanks for posting this. I've been scheming up a similar idea for my 2001 Chev Silverado 4WD Supercab. Don't know if it was offered in the U.S. but in western Canada they had the "Z 71 HD" package with better seats, nice interior & electronics and a good factory trailer package. The o/o was an audio fiend, and he'd installed a high-end Boss sound system just before I bought it. With luck, there will be a big screen head unit available for that, since it's pretty recent. The dash layout is similar to yours, and there's really no way to go the "double DIN" route. Just to make it interesting, I also have a ham radio setup on a Ram-type mount. What I'd really like is a higher, larger screen for GPS and the digital video from the wireless rear & side cameras. Those are a real game-changer & I'd like to integrate them so everything could use the one big screen. Having the screen sitting high, as your setup is, looks useful. The Silverado's layout is a lot like you have in the Ford. The wireless back/side cameras setup makes life a lot simpler. No fishing multiple cable sets, and the digital video signal is interference free. Anyway, thanks for showing this - it looks good, and has given me some good ideas.
It is cool but part of the reason I went from a new car to my 7.3 obs is to get away from all the screens and other "features". Although mine has cruise and power window and locks which are actually slow and failing. 😂
Would the wiring be the same on a 88 f150 if so could you possibly do a video showing what all the wires are tied into the harness you did color code wise wiring is my weak point and I’d hate to burn my truck down or blow my speakers getting the truck for just under 2400 including parts to fix it
very helpful. i was thinking about getting a boss touchscreen for my old ass pathfinder, good to see the install process and what it looks like installed thanks bro
I’m installing this into my 1994 f250 and I was just wondering, there are 18 wires on the aftermarket radio unit, and only 14 wires on the harness, how exactly did you match up all the wires? Did you attach more than 1 wire to another wire?
The radio had some wires that I did not match up to anything. Just put electrical tape around them and keep them to the side. Just incase you do need them in the future.
currently in the process of doing this with the same radio , anyone know which wires to leave out currently have everything on the harness adaptor connected excpet blue , blue/white and orange/white , dont know if i need to connect those
Just make sure you have everything attached like it says in the package. If you have any left over make sure to tap them off. I had a few leftover. Cannot recall the colors though.
My apologies but I would rather not pull my radio back out of my dash. Do you have the same truck as me? If so when you buy the harness it has a color list on the back that says the color of wire and what it does. Then you match that wire function to the wire that is labeled on the radio. Does that help you? If not I am sure someone has a video on the internet of how to wire. Looking back on the video I wish I would have shown me wiring it.
How's that Boss head unit doing after a year? They make horrible speakers ive never given their head units a chance. But the flip out unit in my 94 Ford is giving out.
So far so good, I haven’t had any problems with it. I’m glad to know that about the speakers, because I was thinking about redoing mine with boss, but probably not know.
Make sure your battery is unhooked. Unplug the wires in the back side of the lighter socket. I believe it has a nut you have to unscrew that is around the whole lighter socket. Then you will have to do some minor trimming to get the USB ports to fit.
Thanks for the review 🫡 looks like you posted this about 2 years ago. May we have an update please 🙏 do you like it? Was it worth the money? Still works? Issues? Some people's reviews say the screen is too bright and is an inconvenience for night drives, any thoughts on that? Thanks 🤙
100% worth my money. The only issue I have had Is with my wiring. I twisted the wires the first time, so I had to take the radio back out and solder of the wires. The reason being is because sometimes my speakers would cut out, but that was my fault. I do not think it is not too bright (I went settings and turned the night setting to the lowest possible number making it very nice for night driving). Also when I wired the radio I connected it to my lights, so when I turn on my lights the screen goes to “night mode”.
That’s a good question. Most older trucks do not have security systems, but you can remove the screen very easily and store it away if you think it will be a problem.
I bought the same radio and installing it in the same truck I installed it and as soon as I flipped to my rear tank the radio popped and started smoking. How did u ground ur radio?
I believe I just unscrewed the original one and pulled it out. After that I took a dill with a bit and made the hole bigger by just going around and around in circles unlit it was the correct size.
And one more thing, when you connected your harness to the plug in did you wrap the wire ends around one another or just simply shrink wrap em together?
Do you have an obs for like mine? If so and the plug doesn’t match up you most likely have a factory amp, if so I heard that the plug like I used is hooked up to the amp somewhere so you’ll just have to find it. Maybe look up some videos on how to by pass the amp. You can also just cut and splice all the wires together.
I saw those when I bought this one, but never had seen someone with this one. So I decided to give it a try. Still using it today and really like it, it is a little bigger than you need but it does not block any controls in my truck since you can adjust the height.
Just add to the ground wire. Find someone who can verify. I'm doing this in my rv. That was my tip. With a very stern" Don't watch TV going down the road." Lol!
On something like this if you were to plug say an Xbox 360 video av into the back up camera then when to av(or the back up camera on button) would it work.??
@@skylarwagner1155 bro do it. I been thinking about getting one with 2 inputs and put one camera on the headache rack for the gooseneck ball. And one on the license plate.
You have to have that external usb plug that plugs into your phone. Once plugged in go to the Home Screen where you can see settings, tuner, CarPlay, etc. click on CarPlay and it should work.
It’s the reason I put it in my Jeep JK. I was gonna go with a much more expensive floating screen but none of them are removable. If I have the top off my Jeep and it starts pouring, I need something that detaches instantly. Boss Audio is the only one that does. And guess what ….. it’s actually a beast of a radio so far. Only time will tell. But it actually has a 5 year warranty. Sony and Alpine only have a 1 year on there’s which are 4x more expensive.
Is there anything else you would recommend i buy for the radio other than what you have linked in the description? Very close to buying the 9inch version just wanna make sure i have everything needed.
The only other thing I bought was some Velcro so I could stick the bottom of the screen to my dash. The roads I drive are really bumpy so it keeps the screen from moving so much.
Mine does not, only when I went down dirt roads. I did fix that shaking problem by adding Velcro to the back of the screen and sticking it to the dash though. Now it does not shake at all.
I'm looking to get 1 for my 02' Blazer. I watch movies while out hunting every day & I'm having a hard time finding 1 that will work with Andriod 12. Most of these only work with Andriod 11 or below. Unless it has Mirroring
I do not but I believe Katzkin makes leather replacement covers, where you remove the cloth and put on leather. I am planning on doing that in the future
With the crazy prices of new trucks (between 60 and 100K) today, it's better to outfit an older truck that's in great shape. I am updating my pristine 2004 Super cab 4x4 F150 with low miles to have all the bells and whistles of a new truck. Total expense will be under 6k. Well worth it.
Jesus loves you alot trust in His death 4 salvation and be saved from eternal hell
Exactly what I’m doing with my 07 gmc Yukon. Wayyy cheaper
I’m pimpin out a 03 rwd liberty
You are so right. I’m going to stick with old cars until I can pay 50k cash. My coworker pays $1700 per month for two cars.
I’ve had two and i sold both there’s something missing with reliability and technology. It’s great but never consistent. Old trucks just work and cheap to fix you don’t need flash or update anything if it gets replaced and I had hard time justifying an 800 dollar tail light for my F150 and Ranger in case something happened lol the prices on those parts is insane
I've gone through a couple of these over the years. Definitely a must. The only advice I can offer is; Make sure you get one with plenty of space between the head unit, and screen. The bigger screens will hit the bezel if you tilt them in your direction to see better. My new has screen rotation, so I can switch orientations. Gives more clearance, but covers the a/c controls 😑 Great video! Wish this kind of content was available years ago. It's always harder when you have to figure it out yourself 😅
Had a fun time getting that radio out. I use 4 allen wrenches that will fit the holes tightly or close to and pull that thing right out.
I just looked at a truck a couple days ago, started looking at radio systems and came across this unit, thankyou for showing it off so I can get a good idea of it, high key I'm hooking a gamecube or ps2 to it lol
I like video. I can't wait to show this to my boy. He loves the classic F series and Mustangs. Thanks for this simple video showing how a little tech can be added to any 12v power supply. Good job.
I cant believe that you uploaded this. I want to do the same thing to the same truck. Thanks. But a little bit im going to miss the untouched 94 dash
A little tip for using those radio removal tools in the future, should you ever need to. When you’re pulling the radio out, pull the tools away from each other. That will cause the ends of the tools to push towards the sides of the radio and make them less likely to pop out.
@@eagerestwolf I appreciate it!
Looking incredible. And the stereo is nice too. :) I just purchased one of these units for my 94 Ranger Splash. Thanks for the video.
I always wanted a yellow Ranger Splash! Really cool little trucks!
Thanks for linking the dual USB ports. I just brought the same radio for my car just the 9 inch version.
How does it sound?
@@budjiman1 the sound is mostly dependent on your speakers, I'm sure you know that already but any radio is gonna practically be the same these days as far as sound quality goes
@@JimTheKid i bought 4 moper 6-1/4 inupgrades. Sounds way better!
Wow it looks like it came with the car built in.
Just bought mine today! I’m really looking forward to installing it!!
Interior is really solid! new seats will make it look amazing! I just picked up the same head unit, but mine can't be put in until next week,
Is it good
Jesus loves you alot trust in His death 4 salvation and be saved from eternal hell
I just installed a jvc into my dad's old 2001 dodge ram 1500..now I do the speakers
Good job ! I’ve been thinking about installing one also! As for your seat just buy a memory foam seat cushion , I did because you’ll have a hard time finding a matching seat! My interior is the same color as yours ! Drivers side panel is cracked and needs replacing again no luck finding one! Also good to see your truck is a standard 7.3 like mine keep on rolling!
Nice work Skylar and a great choice for our old Fords….
Thanks for posting this. I've been scheming up a similar idea for my 2001 Chev Silverado 4WD Supercab. Don't know if it was offered in the U.S. but in western Canada they had the "Z 71 HD" package with better seats, nice interior & electronics and a good factory trailer package. The o/o was an audio fiend, and he'd installed a high-end Boss sound system just before I bought it. With luck, there will be a big screen head unit available for that, since it's pretty recent. The dash layout is similar to yours, and there's really no way to go the "double DIN" route. Just to make it interesting, I also have a ham radio setup on a Ram-type mount.
What I'd really like is a higher, larger screen for GPS and the digital video from the wireless rear & side cameras. Those are a real game-changer & I'd like to integrate them so everything could use the one big screen. Having the screen sitting high, as your setup is, looks useful. The Silverado's layout is a lot like you have in the Ford. The wireless back/side cameras setup makes life a lot simpler. No fishing multiple cable sets, and the digital video signal is interference free. Anyway, thanks for showing this - it looks good, and has given me some good ideas.
I hope it all works out for you. So far I have really enjoyed mine.
Great job bravo to you!! Thanks for the info!!
Thinking of doing the 9” version just for a bit cleaner of a look with our old interiors. What are your thoughts since you have the 10
I really like the 10” but I’m sure the 9” is just as good.
Looking at this for my daughter's 97 7.3. Can u do a video on how you made the ashtray into a phone holder? Thanks!!
I has not been a necessity yet, so I have not got to it. That being said when I do it I will for sure post it!
@@skylarwagner1155 thank you! 😊
Beautiful work brotha!
@@ImHim6Fifty thank you!
It is cool but part of the reason I went from a new car to my 7.3 obs is to get away from all the screens and other "features". Although mine has cruise and power window and locks which are actually slow and failing. 😂
Would the wiring be the same on a 88 f150 if so could you possibly do a video showing what all the wires are tied into the harness you did color code wise wiring is my weak point and I’d hate to burn my truck down or blow my speakers getting the truck for just under 2400 including parts to fix it
Did you have to drill the hole where you put the USB port in bigger? If so, what did you use?
Yes you do, I used a step bit to make it bigger.
OMG! THANK YOU!!!! This was sooooo helpful!!!!!!
You do the brake bypass?
Damn. I'm trying to find a cassette/cd player for my Dakota 😅
Did you ever install the backup camera? If you did, you got a sweet video on that too?
@@kmcewen9954 yes I did, here is the link.
ruclips.net/video/5xUObqAITn4/видео.htmlsi=V9jE_nBl8mHlsqwt
Where did you get your wood veneers?
@@twinturboshow I made them out of scrap wood I had laying around
very helpful. i was thinking about getting a boss touchscreen for my old ass pathfinder, good to see the install process and what it looks like installed thanks bro
How is the touch reaction time?
@@ImHim6Fifty it’s not bad, it can be laggy when in setting. Other than that it moves pretty quickly.
That looks good man
I’m installing this into my 1994 f250 and I was just wondering, there are 18 wires on the aftermarket radio unit, and only 14 wires on the harness, how exactly did you match up all the wires? Did you attach more than 1 wire to another wire?
The radio had some wires that I did not match up to anything. Just put electrical tape around them and keep them to the side. Just incase you do need them in the future.
currently in the process of doing this with the same radio , anyone know which wires to leave out currently have everything on the harness adaptor connected excpet blue , blue/white and orange/white , dont know if i need to connect those
Just make sure you have everything attached like it says in the package. If you have any left over make sure to tap them off. I had a few leftover. Cannot recall the colors though.
Did you have to wire in the harness or was it something you could buy and just plug and play?
I had to wire the harness for the radio to plug directly into the truck.
Any way you could do and up close of all you wires to see which ones go where?...im terrible with wiring
My apologies but I would rather not pull my radio back out of my dash. Do you have the same truck as me? If so when you buy the harness it has a color list on the back that says the color of wire and what it does. Then you match that wire function to the wire that is labeled on the radio. Does that help you? If not I am sure someone has a video on the internet of how to wire. Looking back on the video I wish I would have shown me wiring it.
Did you have to buy the wires separately that connect the stereo to the truck wires.
Yes, you have to buy the connector separate.
where did you get the dash bezels?
Any updates I read some comments in Amazon saying that after a few weeks the screen went black and they ended up doing replacements
No problems with mine still.
Great video I will have a look at this radio for my old Corolla.
So all that and apple car play doesn't even work?.. or did you need to switch the internal USB ports
It works great, I just had to switch the usb.
Where did you get the usb plug at im having a hard time finding it and is it really bright at night other reviews says it’s to bright
I got it off of Amazon. You can turn down the brightness in settings.
Looked up reviews for this stereo. Found this and its even going in the same truck! Thanks for the info. How is it at night? Too bright?
I turned the brightness setting all the way down for night and it’s perfect for me!
Literally exactly the same lol. Going in my OBS too
How's that Boss head unit doing after a year? They make horrible speakers ive never given their head units a chance. But the flip out unit in my 94 Ford is giving out.
So far so good, I haven’t had any problems with it. I’m glad to know that about the speakers, because I was thinking about redoing mine with boss, but probably not know.
dose it turn on the backup camara when you shift to reveres?
@@yourmemenot5575 it will if you wire it to your reverse lights. This truck does not, my other truck does.
How do i remove the cigarette lighter socket to put the usb piece in it?
Make sure your battery is unhooked.
Unplug the wires in the back side of the lighter socket.
I believe it has a nut you have to unscrew that is around the whole lighter socket.
Then you will have to do some minor trimming to get the USB ports to fit.
So driving down the bumpy roads are doing mild off routing how has this held up? Thinking about getting one of these for my 2002 Cummins
It has been good so far. I added a piece of Velcro to the back side of it and attached it to my dash, so that the screen wouldn’t vibrate.
Looks good and doesn't interfere.
I’m gonna assume u still have this stereo in your truck. I live in Tennessee so I’ve got a quick question. How does yours function in the winter.
My winter doesn’t get very cold. When it does get cold it is around mid 20s and it works fine.
Still like it? Looking to put it in the exact same pickup
Yes, it’s still works great and I really like it! For sure worth the money and time to install it.
excuse me, a question? Are your dash bicels made of wood, are they painted or do they have another material?
I wrapped them with vinyl I got off of Amazon. They faded within a year so I am now going to try and do a faux wood pattern on them.
@@skylarwagner1155 your idea seems perfect
Where did you got the usb adapter 2:58
I got it off of Amazon
My Apple CarPlay doesn’t turn on any help?
Did you check your connections? If so maybe there is something in settings. I never had a problem with mine, but I can try and help.
Where did you buy your wood trim on the dash
It’s the original trim I just wrapped it with vinyl I got off of Amazon.
Was thinking of getting cause heard you say there is a hdmi port but I do not see it in video or online?
A 7.3 with a manual and 4x4, wow.
Thanks for the review 🫡 looks like you posted this about 2 years ago. May we have an update please 🙏 do you like it? Was it worth the money? Still works? Issues? Some people's reviews say the screen is too bright and is an inconvenience for night drives, any thoughts on that?
Thanks 🤙
100% worth my money. The only issue I have had Is with my wiring. I twisted the wires the first time, so I had to take the radio back out and solder of the wires. The reason being is because sometimes my speakers would cut out, but that was my fault. I do not think it is not too bright (I went settings and turned the night setting to the lowest possible number making it very nice for night driving). Also when I wired the radio I connected it to my lights, so when I turn on my lights the screen goes to “night mode”.
So you have an older truck which probably doesn't have a modern security system with this thing sticking on the dashboard does it not attract theft?
That’s a good question. Most older trucks do not have security systems, but you can remove the screen very easily and store it away if you think it will be a problem.
I didn’t catch what year truck that is?
1996
I bought the same radio and installing it in the same truck I installed it and as soon as I flipped to my rear tank the radio popped and started smoking. How did u ground ur radio?
I grounded it to the stock wiring harness.
Where did you get that wood trim?
I wrapped it using vinyl off of Amazon
@@skylarwagner1155 thanks!
Hey Skylar, I’m getting ready to put the same exact setup in my 97 7.3, how did you get the usb cigarette port into the spot of the original plug in
I believe I just unscrewed the original one and pulled it out. After that I took a dill with a bit and made the hole bigger by just going around and around in circles unlit it was the correct size.
I appreciate it brother thank ya! Also wanted to ask did you use any of the bracket pieces? I’m a bit stumped on those
And one more thing, when you connected your harness to the plug in did you wrap the wire ends around one another or just simply shrink wrap em together?
Personally I did not use any brackets other then the white plastic one I showed in the video.
I intertwined them and then covered the bare metal with shrink wrap.
Do you know what you would do it the plugs you have don’t Match to the ones on the truck?
Do you have an obs for like mine? If so and the plug doesn’t match up you most likely have a factory amp, if so I heard that the plug like I used is hooked up to the amp somewhere so you’ll just have to find it. Maybe look up some videos on how to by pass the amp. You can also just cut and splice all the wires together.
I prefer the ones where the screen flips out so it doesn’t block any controls and just fits better with the interior
I saw those when I bought this one, but never had seen someone with this one. So I decided to give it a try. Still using it today and really like it, it is a little bigger than you need but it does not block any controls in my truck since you can adjust the height.
I got mine today and was wondering what you used for the parking brake wire on the back of the harness
I believe I did not wire that up. I just taped the end and tucked it out of the way.
Just add to the ground wire. Find someone who can verify. I'm doing this in my rv. That was my tip. With a very stern" Don't watch TV going down the road." Lol!
Any issues with the screen hitting the HVAC controls or gauge bezel? Been looking to put one in the 94
No it fits very well in there, plus you can adjust the height of the screen.
On something like this if you were to plug say an Xbox 360 video av into the back up camera then when to av(or the back up camera on button) would it work.??
Not sure, but I think it has the correct ports on the back of the unit for it. You will just have to find power for the box.
@@skylarwagner1155 power inverter on Amazon
I didn’t know Ryan Reynolds’s had a OBS.
Thanks for video! Does this head unit have sun glare? Hared to see during the day?
No, it is pretty easy to see during the day.
What did you do to mount the new radio? I bought one and all ready to put it in but haven’t figured out yet how to hold it in place.
Mine just slid in. I put that white hanger on the back of it to hold it up. Other than that it just sits there and I have not had a problem
@@skylarwagner1155 where did you get the white hanger piece?
@@JordanGrayMusic it was on the old radio out of the truck.
That’s awesome.
I agree!
Are you able to hook up a sub to it and does it have GPS in it?
It has GPS if you have apple car play/android hookup. I am not sure if you can hook up it up to a sub.
Does it have a av Input ?
I believe it does.
Keep its classic just add a couple of modern amenities 👍
Wonder if it fit in a 91 Ford f350 7.5
It should fit, but I can not be 100 percent.
Bro I love it. Thanks for the review I might need to pick up one of these for mine!
Man I’ve been using it for about 2 weeks and it’s so nice! I’ll do another video about it when I get my back up cameras installed, but so far so good.
@@skylarwagner1155 bro do it. I been thinking about getting one with 2 inputs and put one camera on the headache rack for the gooseneck ball. And one on the license plate.
What wire did you use for the reverse wire for backup camera? I have same truck and year and same touch screen
I didn’t hook mine up to any trigger wires. I just turn it on manually when I hook up to trailers.
How did u hook up antenna for radio?
Just plug it in the correct hole in the back of the radio.
I bought the same USB port and it was far to big to fit in my cigarette lighter spot. I had to drill it out
I did too. Not sure why I forgot to mention that in the video.
Awesome tutorial…🤙🏽
Thank you!
Those things just look like a big sign that says "Steal Me" JMO
Did you ever get CarPlay to work and if not why doesn’t it? Looking to put it in my truck
CarPlay works perfectly, maps are not laggy and everything works.
@@skylarwagner1155 how did you get it to work I just got this radio and CarPlay isn’t working
You have to have that external usb plug that plugs into your phone. Once plugged in go to the Home Screen where you can see settings, tuner, CarPlay, etc. click on CarPlay and it should work.
I'm thinking of getting this for my jeep tj. But I will have my top down so my question....is the screen removal for security?
Yes, behind the screen there are 2 buttons that you can push and the screens comes off.
It’s the reason I put it in my Jeep JK. I was gonna go with a much more expensive floating screen but none of them are removable. If I have the top off my Jeep and it starts pouring, I need something that detaches instantly. Boss Audio is the only one that does. And guess what ….. it’s actually a beast of a radio so far. Only time will tell. But it actually has a 5 year warranty. Sony and Alpine only have a 1 year on there’s which are 4x more expensive.
What did you do with the old one?
I gave it to one of my good friends.
Is there anything else you would recommend i buy for the radio other than what you have linked in the description? Very close to buying the 9inch version just wanna make sure i have everything needed.
The only other thing I bought was some Velcro so I could stick the bottom of the screen to my dash. The roads I drive are really bumpy so it keeps the screen from moving so much.
Would this work on a nbs?
It should as long as it is a single din
Is yours still running? I've got the same one and it died after about a month. Waiting for a warranty replacement.
Yes! Mine is running good I use it everyday. Sorry to hear that I hope you get a new one from warranty.
@@skylarwagner1155 Getting the radio replaced under warranty.
E brake bypass?
Does it shake while driving on the freeway
Mine does not, only when I went down dirt roads. I did fix that shaking problem by adding Velcro to the back of the screen and sticking it to the dash though. Now it does not shake at all.
Great work buddy. Would like to know where did u purchase ur wood grain molding for the dashboard?
I just wrapped it in vinyl. You can get it on Amazon. They have a bunch of different kinds and colors.
Where is the link for the USB port?
It is in the description, it it the 2 port USB
I'm looking to get 1 for my 02' Blazer. I watch movies while out hunting every day & I'm having a hard time finding 1 that will work with Andriod 12. Most of these only work with Andriod 11 or below. Unless it has Mirroring
I have no idea how the unit works with android, but I have a iPhone 12 and it works perfectly with it.
How does it sound?
Sounds about the same as the stock radio.
@@skylarwagner1155 that's disappointing
Ive seen a ton of great reviews. I guess it depends on how good the stock radio was...speakers etc
I love it your pick
up
Hey nice job doing the install! Do you have a link for that steering wheel cover if you got it online?
I actually bought it at Walmart, should be in the automotive section with a few other selections.
Ok thanks,
Do you know the size by any chance that worked for you
Also do you know where one would find new leather bench seats that fit in this generation truck?
I do not but I believe Katzkin makes leather replacement covers, where you remove the cloth and put on leather. I am planning on doing that in the future
Ok thanks man, and do you know the size of the wheel cover that works for the truck
I wired it but I have no audio
What did you install it in?
Did you ever get it fixed?
I’m having the same issue.
Connected directly to a set of speakers separately outside and still no audio
I'm literally looking at this video and thinking could I put a gorilla engine in my 1988 ford f150 😂😂..them new truck cost too damn much
The Godzilla 7.3 would be sick
Helll yeah !
Looks like discount Ryan Reynolds
Lol, I have been told that a few times.
Ryan Reynolds looks like discount Skylar Wagner
$300 damn I bought a 10 inch android one from eBay for $75
W vid
This is me personally but I hate seeing old cars with touch screen radios. It just doesn’t fit.