Before anyone wastes their time cutting the wrong size pieces; they all have to be the exact length. You need 16 stacks, each with 70 staples (a hair under 1 and 3/8ths). I use a razor blade to cut them. Be warned, because of the fragility of the staple stack, it can be a challenge so take your time. 👍
@@shizuxo lol it absolutely matters because the width of the staples has to fill the gaps and connect the staples. You tried coming in with all that sass "lmao" and clearly didnt think for a moment of what you were actually saying. just trying to be sassy lmao
I read most of the comments. Almost everyone wants to know what size staples to use, same question I had. (Note: a staple has a crown which is the top part, and 2 legs). Since the youtuber did not disclose measurements of his staples, I decided to use the old tried and true method of observation, and so, this is how to go about building your own cube: using the staples at hand do the first step he did: place two stacks with legs facing up, parallel to each other and separated by a distance slightly shorter than the crown. Use another stack facing down as to lock them up. Carefully stretch them out and measure what will be the width of each stack for your own project. Make sure the legs are shorter than the crown or it won't work. Mine came to 1 3/8". I used standard staples with 1/2' crown and 1/4" legs and came to a measurement of 1 3/8" for the length of each stack. Now, I don't have enough staples at hand, will have to buy some more. Once I build my cube I'll let you all know how it turned out. Have fun! 😊
@@thisindianfan9054 I just tried with same as you, wont work because 3 plates that you put down are wider than that 1 that gose on side and you cant make it longer... it only works with long staples that you can cut down if needed...
Saw the short and I'm gonna try this Update: Now trying at work gotta figure out how many staples are in a brick here Update: Just finished! It's a bit lopsided since they aren't all the perfect size but it turned out pretty good!
@@tangjaydengaming7057 (Pierced from Within) posted 2 days ago: Pierced From Within 2 days ago Standard half inch staples, length of staple stack is 1 and 3/8 inches. 16 stacks needed. He also posted this comment: Before anyone wastes their time cutting the wrong size pieces; they have to be exact. A hair under 1 and 3/8ths. I use a razor blade to cut them. Be warned, because of the fragility of the staple stack, it can be a challenge so take your time!
me after trying this :- my patience is leaving i got the bucket to throw this,my patience is leaving i got the bucket to throw this, ayi ayi aaa i threw it at 1kth fail not much a i do my class.lol🤣😅
Had to try it. Those measurements are exacting, that's for sure! One staple too long or short and it doesn't work. But get it right, and wow, is that satisfying!
Guys before wasting of time ...some body tell how it can be stable when second last staple cant stay in its place even after putting last staple because there is something called gravity unless use of glue...
The last step is equivalent to GTA helicopter mission.
Nahhh it was easy
no its not? i bet more than 50% people struggle at that last part@@Entess_Gaming
@@Dracul_X Yes it is i did it on the first try
@Hip.Hip.Hurray no no it's inspired by gta online missons 😂😂
@@SUSHMACHAUDRYnah the helicopter mission in vc was hardest others are not even close
If your wondering, there's a total of 1,120 staples in the cube
This is still better than 5 minute craft...
This man’s hands are more stable then my brain
"than"
A😅😅😅😅😅😅😅😅😅😅😅
😢
Gets up and runs to office closet! 😂
EXACTLY!
RIGHT!?
Right I also Tried
I am Also Complete The Challenge
Watch
You too!!?? Lol
Before time began, there was... the cube
After the cube, there was... no time left!
Long before time had a name
time cube? isn't it time square?
We do not where it comes from. Only that it holds the power to create worlds and fill them with life.
Bayformers.
Before anyone wastes their time cutting the wrong size pieces; they all have to be the exact length. You need 16 stacks, each with 70 staples (a hair under 1 and 3/8ths). I use a razor blade to cut them. Be warned, because of the fragility of the staple stack, it can be a challenge so take your time. 👍
^^^ You tha man (or woman).. worked like a charm!
Umm can u please explain in an easier way. I Don't understand English too much. I didny understand the, " A hair under 1...."
@@alexdriscoll5899 awesome!! So glad to hear it helped! 🙂
@@mrweeb8533 staples need to be about 35mm in length
@@naledithema9480 oh alr
The amount of staples you’ll need in each stack is 72 for anyone wondering
No, it's 52
@@davidhradilek5988multiple different amounts will work. duh.
lol it doesnt matter as long as all stack are form same box lmao
@@shizuxothe length of the staples is directly linked to the width of the staples.
@@shizuxo lol it absolutely matters because the width of the staples has to fill the gaps and connect the staples. You tried coming in with all that sass "lmao" and clearly didnt think for a moment of what you were actually saying. just trying to be sassy lmao
*Me watching and trying dis late-night*
*EVEN THOUGH I KNOW TOMMORROW IS MY EXAM*
you are spying me right?!
You. Are. Spying. Me. Too.
Yoo this guy is spyin' man
I read most of the comments. Almost everyone wants to know what size staples to use, same question I had. (Note: a staple has a crown which is the top part, and 2 legs). Since the youtuber did not disclose measurements of his staples, I decided to use the old tried and true method of observation, and so, this is how to go about building your own cube: using the staples at hand do the first step he did: place two stacks with legs facing up, parallel to each other and separated by a distance slightly shorter than the crown. Use another stack facing down as to lock them up. Carefully stretch them out and measure what will be the width of each stack for your own project. Make sure the legs are shorter than the crown or it won't work. Mine came to 1 3/8". I used standard staples with 1/2' crown and 1/4" legs and came to a measurement of 1 3/8" for the length of each stack. Now, I don't have enough staples at hand, will have to buy some more. Once I build my cube I'll let you all know how it turned out. Have fun! 😊
Bro i cant make cube strongly so what can i do pls help me i am using 24-6mm size staple still it not happening
@@thisindianfan9054 I just tried with same as you, wont work because 3 plates that you put down are wider than that 1 that gose on side and you cant make it longer... it only works with long staples that you can cut down if needed...
I KNEWIT! They are definately not the same length. I just got started. Thank you.
You are so unemployed to right this whole useless thing
Smart! Im trying with my own sizes as I build the cube, so far it is working after spending 24 hours to figure out they can not be the same size 😅😅😅😅
Staple sales after this 📈📈📈📈
Does not work with standard sized staples, I tried at work 😂
Ecactly, same problem 🤣
It works but they easily breakout😂
Yes bro but i have the same size stapple??
It works bro !! Little loose but done
It broke at last pice
Awesome 🔥
The last step was truly very hard but finally made it after 7 - 8 tries 😊
it takes almost 2 hours💀
I almost gave up
Yes...
It's really very hard bro
Really 7 8 😂 I made it in 2nd try the only thing is you have to do with patience
Saw the short and I'm gonna try this
Update: Now trying at work gotta figure out how many staples are in a brick here
Update: Just finished! It's a bit lopsided since they aren't all the perfect size but it turned out pretty good!
there are 16 staples bars : > ! X40 or X50 (roughly)
@@donahu85 mmm that would explain why my mine came out a bit lopsided for the length and width in certain places. Off by just a bit
the hardest part is to put the last stapel at the right position
😢true
Nah it was ez af........ You just need to push away the others a little bit and you are done
I stopped everything & spent over an hour trimming strips to perfection to build this.
How much were one staples
@@tangjaydengaming7057 (Pierced from Within) posted 2 days ago:
Pierced From Within
2 days ago
Standard half inch staples, length of staple stack is 1 and 3/8 inches. 16 stacks needed.
He also posted this comment: Before anyone wastes their time cutting the wrong size pieces; they have to be exact. A hair under 1 and 3/8ths. I use a razor blade to cut them. Be warned, because of the fragility of the staple stack, it can be a challenge so take your time!
Tried it! Last step was a tight squeeze, but when it fit perfectly into place, it was so satisfying ☺️
Did it come off as pieces or stuck tight??
@@vishwajitm4562 mine came out
@@vishwajitm4562 mine also came out
@@vishwajitm4562 w
@@vishwajitm4562 g
Very cool, worth every second of my life
You were doing this all your life? Tf.......
How many did you make to make it look so easy to make one? It took me half an hour to assemble one of these cubes
You might have loose staples. Even i have loose staples, but did it under 5 minutes (first time)
@@nevil999 same here in 2nd try
good steady hands i've been trying myself it just keeps sliping around and falling apart they made it look so easy i won't give up
Had to use gum.. otherwise it was impossible
Mine kept breaking in half
me after trying this :- my patience is leaving i got the bucket to throw this,my patience is leaving i got the bucket to throw this, ayi ayi aaa i threw it at 1kth fail not much a i do my class.lol🤣😅
As a classical guitarist with long ass nails, this was extremely difficult to do.
it must me hard taking a dump with nails on your ass
Fr XD
Cut your nails then
@@poland4m17s no can't do, they're too important.
Had to try it. Those measurements are exacting, that's for sure! One staple too long or short and it doesn't work. But get it right, and wow, is that satisfying!
Vary easy
looks like a minecraft house 😂😂😂😂😂😂
I literally did but at the when i try to pick up and it got break...and it took me 30 minutes😢💔
Try again don't give up
Same, its not that tight
This cube looks like it is glued together.
Awesome trick 👏, But newbie be careful last step can ruin everything
Took about 4mins to get it done, last step was a bit tricky!
When youre one pin block short....
Would be nice to have an exact measurement of the staples
Standard half inch staples, length of staple stack is 1 and 3/8 inches. 16 stacks needed
@@whileistaysecluded Thank you, as you are proof not all heroes wear capes!
You need No.10 staples
De echo si las tienen nomás que no medi mis grapas y me da pereza desarmar mi cubo xd
@@nodwolf no problem! I am glad to help let me know how it goes
Cooll!!
That’s cool
আমরা চেষ্টা করলাম হয়েছে তবে আপনার মত পারফেক্ট হয় নাই
Bana kar axa lga
Drawing pin on top of the dark square
Boris Johnson quits
Before trying, use super glue to make the staple more stable.
I am Also Complete The Challenge
Watch
nitip
جالب بود
Complete
Nice 👍👍👍
As a person that usually dont have alot of staples , its a lose lose for me
For those saying that the cube is unstable...before making the cube try to press the sides of the pins (but dont break it) and then try
16 parts, 52 pieces each 💪✌️
Thank you 🎉
How to remove 😅
Wow
Iwas at the last step when my plate or chotti or ponytail ruined it
From cool to f it real quick😂😂
I completed it, but it fell apart when I lifted it, it fell apart😢😢😢
Looks like the Spiderman cube
I did it after trying more than 10 times...but now the problem is my father wants staples and I don't want to give it to them😅😅😅😅😅😂😂😂😂
I am Also Complete The Challenge
Watch
Them? How many Fathers do you have?
I am have tried it, so I GOT IT!!!😊❤
It took me 3 tries, while doing the last step it was hard....
But i got it!❤
It is so hard how did you do it😢
Doing this with small staples at a last stage was tough though😅😅
How many staple pin is required for this
16 brother
Awesome
U can use tape
To keep it together
Me donning keeps falling!, then wait I’m out of staple!😂
Im proud of myself bcoz I can do it with 9mm, 4.8mm Stapler. Santisfy with the result. Thankyou for sharing :)
I tried to make but could not make it even after 20 tries I also used help of my grandfather but still didn't make it😢😢😢😢😢
I completed this challenge
which people made this so well
👇
Bro l am sweating to try this
Thanks for the idea❤❤❤❤❤❤❤
this cured my depression
In the last step, one weak part broke and here goes my hardwork. Gosh was so excited for it. Where can I find new stapler pins at this hour
It would get built but would break if you lift it😢
The moment I completed it
And hardly put it aside for a second it's ruined already 😐
So clever!
each piece should be about 6 staples less than 1.5 inches.....or 1 5/32 of an inch
Me : For the last step i need some one else.* Calling my brother*😅
Screw this. I ruined an entire box of staples on this 😂
I spun the cube and it broke into pieces :((((((
Worth every second of my life 🎉
To help theres 18 pieces
It is very delicate
انت مبدع
Completed
Successss
Why is it so hard!😭🙏🙏🙏🙏🙏🙏🙏
How is it so stable? Mine fell apart as soon as I started!
It's unstable I til it all comes together. They need to press on each other to hold in place.
Nah man, through the whole process. It’s unstable even when I finish it. I try to pick it up and it still falls apart.
me watching this in 4k
easy hack to do this: use magnets :D
Made it. But doesn't become strong. Stays loose. Why?
did it , but now im stuck with a stapler with no bullets and a cube made out of staples .
I did it but the staples are loose..but not getting the way he is showing in the video..is there a gimmick
Longer stacks
Which pins are needed mine are lose 😢
How much does a box cost?
Guys before wasting of time ...some body tell how it can be stable when second last staple cant stay in its place even after putting last staple because there is something called gravity unless use of glue...
Nice
I give up, the staples broke off
how long does each piece have to be ?
I always struggle with the last part
How Much Pins is used for making a perfect cube 🤔
16
For mine i used stacks of 71 staples, 16 stacks
😮
Bro ..do u know how hard I've been trying! My hand is so tired that i could barely write 😢
Mom, please buy me staples I've got tons of school projects.
Il y en a qui se font vraiment chier au bureau
Easy peasy.. but there's a hole in your cube. 16 staple bars are not enough, you need 18 bars for a perfect cube. Mission impossible tho'.
What # staples is this?#10 ones don't seem to work!
Really nice!
IT TOOK ME 3 HOURS TO MAKE THIS 1/10 stars at the end i ended up gluing the whole thing together
Thank you 😊😊
Lunch-break inventions 😋