I mounted some lgrp 63mm black labels. Which is NL4 compound. They are literally injora S6 compound! And I used 1.1 bead locks. I needed some bubble juice😂
So at 299 for the 10 pro kit, this still isnt a great deal after needing the upgraded parts seen in this video? In my case everything will have to be purchased as i have no surplus parts. Thanks for all the education and entertainment!
I still contend that the way to build a Pro, is to build one-- Amazon gearbox, Zoku rails, 10 Pro portal axles. If Horizon saw fit to sell a portal Pro, it might be worth it. The shocks will inevitably be replaced, and the Zoku geometry is much better than the stock geo. At the end of the build, you'll probably end up spending about the same you would having bought the kit and upgrading it, but with no compromises and far fewer parts left over.
There are dig conversions available for the SCx10 Pro transmission. I'm running one in mine. I like the dig function more than switchable OD. Might be worth checking out for one of yours. Cheers and thanks for the videos.
Use rubber grommets on the body. Those balls should pop in and out easily😂😂😂. I use ball posts with rubber grommets on two trucks and it works very well.
The premium for the M6 threaded mounts is pretty steep, as the actual push latches w/ hardware are $3-5 each. I just hope to find better quality latches.
Mr canyon I have a question. I’m looking for compatible spur for meus gold rush ? I’ve been running it for a couple months now and have a annoying gear mesh wah wah wah noise from the pinion and spur. I changed the stock pinion out and it got better but spur has a runout causing wah sound. Looking for spur recommendation
I mounted some lgrp 63mm black labels. Which is NL4 compound. They are literally injora S6 compound! And I used 1.1 bead locks. I needed some bubble juice😂
Those two sweater axles sure are neat.
The single blue bird is Tony, Finnish cousin of Terence.
They already have names, but I can't help thinking of them as Larry, his brother Darryl, and his other brother Darryl.
Larry would work...Larry Bird👍😁👍
That trio. Nice
Howdy👊
So at 299 for the 10 pro kit, this still isnt a great deal after needing the upgraded parts seen in this video? In my case everything will have to be purchased as i have no surplus parts. Thanks for all the education and entertainment!
I still contend that the way to build a Pro, is to build one-- Amazon gearbox, Zoku rails, 10 Pro portal axles. If Horizon saw fit to sell a portal Pro, it might be worth it.
The shocks will inevitably be replaced, and the Zoku geometry is much better than the stock geo. At the end of the build, you'll probably end up spending about the same you would having bought the kit and upgrading it, but with no compromises and far fewer parts left over.
@CrawlerCanyon Thanks Mr.C!
Can we get a Wroncho build?
Swap your pinion with the spur and go real fast.
There are dig conversions available for the SCx10 Pro transmission. I'm running one in mine. I like the dig function more than switchable OD. Might be worth checking out for one of yours. Cheers and thanks for the videos.
Hey how r ya thanks for the videos
Use rubber grommets on the body. Those balls should pop in and out easily😂😂😂. I use ball posts with rubber grommets on two trucks and it works very well.
Wagwan Canyoneros 👊
Howdy👊
I think you have to do a yellow rig and call it big bird😂
Orange wheels too
Around my house BLUE JAYS are quite angry, And destructive to all the other birds nests......
Great ghostride! I would like to see the third bird with switchable OD 20/60% on those straight axles.
Is the third bird the flipped bird🤣 maybe you should paint it red and it should be called angry bird
The bird trio have to go through Deadline all at once one day. The tree-trio and the bird-trio...
Those double cvd axle shafts would be nice for F10s🤔 Where did you find them? Have a great one 👋
They're for AR45/10 Pro, so in my testing they won't directly fit an F10, but with the right choice of knuckle... maybe? alnk.to/2jN9dO0
They are I guess three brothers (blue birds) jay, Jake and Jim
Jay's the leader
The bird is the word
Exo RC makes those hood latches for RCs
The premium for the M6 threaded mounts is pretty steep, as the actual push latches w/ hardware are $3-5 each. I just hope to find better quality latches.
terence is great, very very nice 🤌🛻
Where are u getting the double jointed axle shafts? Can’t find em
alnk.to/2jN9dO0
Mr canyon I have a question. I’m looking for compatible spur for meus gold rush ? I’ve been running it for a couple months now and have a annoying gear mesh wah wah wah noise from the pinion and spur. I changed the stock pinion out and it got better but spur has a runout causing wah sound. Looking for spur recommendation
Missed opportunity totally could be Rigby but you have bluebird instead of mordecai
Could you tell me which tires the truck on portals has?
JConcepts Hunks.
@@CrawlerCanyon Thank you!
Yo
Howdy👊
21🌮