VARIABLE CAMSHAFT GEAR, VVT SPROCKET GEAR REPLACEMENT MAZDA 2.3 CX-7 CX7 MAZDASPEED 3 MAZDASPEED 6
HTML-код
- Опубликовано: 7 фев 2020
- VARIABLE CAMSHAFT GEAR, VVT SPROCKET GEAR REPLACEMENT MAZDA 2.3 CX-7 CX7 MAZDASPEED 3 MAZDASPEED 6
In this video we will explain how to remove and replace the variable timing camshaft gear / vvt sprocket on Mazda with 2.3 Turbo Engine. If you need help with installing the vvt timing gear sprocket. We explained how to remove and replace camshaft sprocket gear on Mazda CX-7 but it should work on MazdaSpeed 3 and Mazda speed 6 with the 2.3 turbo disi engine since they all share the same engine.
This video may be helpful on:
Mazdaspeed 3 2.3 Variable Timing Camshaft Sprocket Gear Replacement . VVT Gear Replacement
Mazdaspeed 6 2.3 Variable Timing Camshaft Sprocket Gear Replacement . VVT Gear Replacement
Mazda CX-7 CX7 2.3 Variable Timing Camshaft Sprocket Gear Replacement . VVT Gear Replacement
► Timing Chain Kit: amzn.to/2PMNEwd
► Timing Tool: amzn.to/2Mkt3NH
► Engine Sealant: amzn.to/2oKQOpp
► Front Crankshaft Seal: amzn.to/34MyVWg
► Screwdriver Set: amzn.to/34a6r9X
► Clip / Panel Removal Tool: amzn.to/2ZIa03I
► Tool Set: amzn.to/2n2dnpb
► Torx Socket Set: amzn.to/2oBNBZ0
► Reverse Torx Socket Set: amzn.to/2oEEYwQ
► Makita Impact: amzn.to/300c4Jt
► Dewalt Air Compressor: amzn.to/2nVApOq
► Impact Wrench: amzn.to/2nVAOjU
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmech...
► Our Website: mechaniclifestyle.com
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys. 
Авто/Мото
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Bro this cx 7 it’s been in this shop for years !!!!
I have been working on my 2008 mazda cx7 2.3l turbo, you have been so helpful to me on all aspects
super helpful
thanks guys
The 2.5 chain , vvt and other sprockets are a good upgrade over the 2.3
Nice video
Asante fundi kwa elimu karibu Tanzania 😁
I don't understand why vvt has to be aligned - is it not just a friction washer timed with the cam lock at the end? How do you align a new VVT?
Bro i have mazda cx7 not losing engine oil but have oil in the muffler pipe which making blue smoke . This happen only when climbing. Why do you think this happen? Thank you
I have a 2006 Mazda 3 2.3 l i bought a new head and it wasn't no camshaft bearings does it take them
i have question please help me my mazda 6 the actuator it is turn back and forth it is turning round back and fort or didn't???? please help me
You should use the new timing chain since it doesn’t have any slack
Guys please help with your knowledge, does the bad/ faulty srockets can cause low compression? Thanks
A bad vvt actuator can indeed cause low compression
Pls I Want to ask a question about this engine
Not able to understand what is being said when the vvt phaser is being removed about how the "teeth are aligned." Showed the mark on the front but didn't say what it is supposed to be aligned with?? Just said the one raised surface on the back is supposed to be up but there are about four of those on the back so there's no way to identify which one on a new one.
Would be good to see a vvt tare down ,
hello i have cx7 2008 suddenly i had noise timing chain code p0016 so i changed the oil the chain spocket timing selenoid the spark plugs and the tensioner i still have the code p0016 cold start after a minute i reset the code no code please help me
Man where are you from? Your accent is so different...
Question; does the VVT/sprocket supposed to have a slight rotation play in it back and forth, say 1-2mm of play ?
Or no play at all?
No . It shouldn’t have eny play ..... it should only move with oil pressure !!!!
Michael and Mindi St. John well the thing is thag if the pin is in theor and under tension it might move abit like 1mm .... but no more them one or nome at all .... if it moves alot its ther lose or the pin in ther got lose ....
Michael and Mindi St. John the only thing that shold advance timing on vvt ... would be the oil presure !!!
what does the vvt actuator need to be aligned with? the other cam sprocket or what?
The camshafts and crank need to be locked in place. You can see the plate they use on the rear of the cams. Sprocket itself can be any orientation but the chain between the 2 sprockets should not be slack and the notchs in the centre should be aligned.
Ok guys hir hir hir
any phone number to talk to you guys?
Jesus christ how many times you say guys.