Hi Everybody! If you like me to do the upgrade, you can find more information in the video description. And here is my review of the X-500 LCD Key Fob ruclips.net/video/kNcuTaQGcCw/видео.html Cheers!
@@CrySomeMorePlease Hi Google Sucks! Nope a normal remote battery (normally CR2032) does not have enough power to run the LCD Key Fob or to extend it's battery life. Hope this helps, Cheers!
@@CrySomeMorePlease Hi Google Sucks! I unfortunately don't know the official answer but if I had to guess, it's likely an option to have the remote hold the button down on the original remote if you hold your finger on the screen virtual button (normally it appears the Key Fob presses the button on the original remote once when you touch the screen virtual button) And if I ever can confirm from FitcamX what the official description of this function is, I will update this comment for you. Hope this helps, Cheers!
Hi Delwyn! nice! congrats on your new LCD remote, I still get some many questions when people spot me using me LOL It definitely catches people's attention! 😁
So mine came in... They were able to get me all connected. I had many questions and FitcamX was responsive and helpful. This thing is awesome. Thanks guys. If you are a car person this is a must have.
I just bought one of these for my Infiniti but I don’t know which one is the positive and the negative for the power I tried hooking it up but it’s not turning on so I believe I’m doing something wrong lol
Hi Lester! oh oh! be very careful you don't to damage something, positive on a battery is normally indicated by a "+" however I would strongly recommend taking the key to a place that already works with electronics, they can do the transfer in the blink of an eye where I would take way longer for someone who hasn't done soldering before. However If you still want to attempt, I have a video coming showing how I soldered mine. Stay tuned bud!
Hi K! This is an universal kit for all cars and models that use a remote with buttons, if your remote has normal buttons then it should work. Regarding the physical blade, there is no space for it inside the LCD keyfob, Cheers!
I just bought one of x900 remotes. Should be here within the next 2 days. One thing none of the videos touch on is the signal strength. What's the distance for remote start?
Thank you Jonathan! Ah so far I have not run into any PCB too large for the FOB, there is quite a bit of space in there, here are the measurements 55mm x 34mm x 6mm (actually it's a total of 66mm long, but the space towards the end tapers from 34mm down to 26mm so I usually don't count that area). Cheers!
great video! thanks. 1. I have a mitsubishi lancer 2015 with immobilizer chip in the key fob (with regular key in it). what do i do with the chip from the original remote? put it in the lcd remote? will there be room for it in the lcd? does the chip needs to be close to the pcb board in order for the car to start, or just close to the ignition key hole?( i have only one original key so i can't put one chip in the lcd and one in the original key fob.) i understand i probably will have to carry both key fobs to start the car, until i switch to remote start hopefully in the future . 2. will the Push Start Kit Add On, you put in the description EC003, fit for my car?
You're welcome! Ah regarding the chip built into the physical key, you are correct, the LCD keyfob turns your current keyfob into an LCD keyfob, it does not have room inside to carry a key. So if you need a key to start your vehicle you will still need that key to start it once you upgrade to the LCD keyfob. Regarding adding push start later, yes that can be added using a kit like this one amzn.to/2Z12Xsr The contents of the remote start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs. Hope this helps, Cheers!
@@AlexAutoFun thanks! regarding the push start kit, since i would need to bypass the immobilizer. i understand that one key needs to be in the ignition to unlock the wheel and another key to be inside the bypass, and since i only have one original key, can i split it, so that the key itself will be in ignition and the chip in the bypass?will it work? furthermore, will it be possible to tape the tiny immobilizer chip right next to the ignition hole instead of buying the bypass?
Ah I wish I could help with that, but I seen so many variations in how the immobilizer works and ways to bypass it, seems it's almost different for every car LOL So while I'm familiar with IMMO, I can't confirm which method would work best. However what I can recommend is to contact local installers who install car alarms for a living, they may be able to point you in the right direction and also give you a quote (I did one remote start install a very long time ago and I swore I would never do another again, so many wire splices, soldering and dealing with the IMMO LOL) I did recently find another remote start system that is plug and play here you go ruclips.net/video/JHAYqbHpbNM/видео.html They may be another resource to check with regarding your specific case if you go with one of their systems. Hope this helps, Cheers!
Hi RazoE! It's size is near identical to the BMW LCD key you get with the 7 series. The size is mostly limited by the need for the new key fob to fit your old key circuit board inside and the size of the touchscreen itself. But I wouldn't doubt it will continue to get small like all technologies do. Hope that makes sense and thanks for watching bud!
Hi N! Remote start can be added to the car using a kit like this one amzn.to/2Z12Xsr The contents of the remote start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs, Cheers!
Hi Jordan! Correct, Fitcamx rates the battery on the X-900 at about a week with screen use and 3 months without screen use. They also have extended battery life versions, they rate the X-600 and X-700 at about 2 weeks with screen use and 3 months without screen (I put a link to them in the video description). Hope this helps, Cheers!
Hi Checo! Unfortunately there is no space inside the LCD keyfob for a blade key. The key can be carried separately like a traditional setup up or if you want to eliminate the key completely, a push start system can be added to the car using a kit like this one amzn.to/2Z12Xsr The contents of the remote start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs. Cheers!
Hi Floria! This is an universal kit for all cars and models that use a remote with buttons, if your remote has normal buttons then it should work. Cheers!
Hi aztecspike! This Key Fob supports a maximum of 4 buttons which means you would have to decide the 4 buttons most important to you and which one you are willing to give up. Maybe we will see a 5 button version (assuming there is enough demand) and if enough people request this from FitCamX. Hope this helps, Cheers!
Hi Kanudos! Nope, the OBD2 adapter is only used for the comfort function (locking and unlocking the doors). Here is a OBD2 dongle scanner if you need one ruclips.net/video/rGWSxEXFbOg/видео.html Cheers!
@@AlexAutoFun Thank you! I actually have that exact OBD scanner. But I wanted to know if the LCD Key OBD can be used to read engine oil and coolant temperature. ? Thanks
Hi Alexander! The range is determined by the range of your original remote (remember this uses the original remotes transmitter) Here is the original video where I cover this in more detail ruclips.net/video/kNcuTaQGcCw/видео.html Hope this helps, Cheers!
Hi Shamir! it should be able to assuming your remote currently has that function. Remember the smart LCD remote just presses the button for you (electronically) regardless of the button function (the smart remote doesn't know what the button activates or does, it just knows that it has to activate whatever button you have pressed on the touchscreen on the physical button of your old key fob) Cheers!
Hi Slash111111! Yes you do not need keyless entry for this auto lock and unlock (as long as your current car remote can lock and unlock the car when you push a button) And If you decide to go completely keyless in the future, this can be done using a kit like this one amzn.to/2Z12Xsr The contents of the push start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs. Hope this helps bud!
Hello do I still have to buy the remote engine start for my 2019 BMW G20 M340i XDRiVE to switch on remote engine start because I haven’t switched it on with BMW but does that key fob switch it on ?
Hi Frankie! This Key fob does not add remote start unless your car already has it. However remote start can be added to the car using a kit like this one amzn.to/2Z12Xsr The contents of the remote start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs. And here is the advanced the version of this key fob where they added more options for automating remote start ruclips.net/video/m94fFgXrJEY/видео.html Hope this helps, Cheers!
Hi Aude! It's size is near identical to the BMW LCD key you get with the 7 series, it actually looks like a straight copy of it lol. But if you don't need it to look like a BMW key here is the Mini version amzn.to/3qrjeBN And I imagine that it will continue to get even more smaller like all technologies do overtime. Regarding using with multiple vehicles, nope it can only control the car that the original remote belongs. Hope this helps, Cheers!
Hi Zeljko Porobic! take a look at your manual (page 7 if I remember correctly) it shows the file format as PNG, naming convention, size and resolution requirements. It also has FitcamX contact info if you need help converting your image. Hope this helps, Cheers!
My car needs the lock button to be pressed 3 times for the remote start to function. Can i set that up in the menu so it does it automatically when i press start?
Hi Jose! yes you can customize the remote start option to automate this process for you reducing the number of clicks, you can see this at the 6:20 mark. Hope this helps and thanks for watching bud!
Hi RusWolf! You would start the car like before with a normal key, remember the LCD Key fob does not add push button start unless your car already has it. However push start can be added to the car using a kit like this one amzn.to/2Z12Xsr The contents of the remote start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs. And here is the advanced the version of this key fob where they added more options for automating remote start ruclips.net/video/m94fFgXrJEY/видео.html Hope this helps, Cheers!LOL. Cheers!
Hi Luis! If your current car remote has remote start then it should be able to, the smart LCD remote just presses the button for you (electronically) regardless of the button function (the smart remote doesn't know what the button activates, it just knows that it has to activate whatever button you have pressed on the touchscreen or on it's physical buttons) Hope this helps and thanks for watching!
Hi Aaron! I have converted two G840H's already and just received a 3rd one that also has screws (video showing the conversion on it coming!) but it's possible that yours may not have screws, sometimes I do see small differences between product coming from the manufacturer directly vs Amazon (where I get all my stuff) that may be a possibility (and even within Amazon stock there could be different batches of the product). I'm currently working on the mounting solution for dash cams that do not have screws, stay tuned for that video and cheers bud!
What would the battery life look like if i always used the keyless access and very very very rarely used the screen/buttons. I know its hard to say but a rought guess?
Hi Emiliano! Fitcamx rates the battery on the X-900 at 1 week with screen use and 3 months without screen use. They also have extended battery life versions, they rate the X-600 and X-700 at 2 weeks with screen use and 3 months without screen (I put a link to them in the video description). However if you don't plan to use the screen and primarily want the auto lock and unlock feature also consider a system like this one amzn.to/3VZP9H0 Since it was designed to be used without a screen it is very likely it's battery life will exceed any of Fitcamx LCD Key Fobs. Hope this helps, Cheers!
Hi sherridanj! nope it can only support one vehicle, however I can imagine that soon we will see one that will support multiple cars and once they do have it, I will review it for your guys! Stay tuned bud 😁
Hi 07freshkid70! yes you can still use the comfort system (automatic door locking and unlocking) if you car does not have push start. And if you decide to add remote start later, it can be done using a kit like this one amzn.to/2Z12Xsr The contents of the remote start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs. Hope this helps and thanks for watching bud!
@@AlexAutoFun I would like to mention though I do not have an actual push to start built into the car as factory, I did get a computstar remote start key fob added. Would the remote start function work based on have the compustar installed?
@@07freshkid70 Ah I'm not familiar with that push start system, but assuming it includes a remote with buttons then it should work. The LCD Key fob does not know what the function of the button does, it just knows that it has to push the button on your old key fob when you press the virtual button on the LCD screen. Hope that makes sense and cheers bud!
Hi Barber Chris! There is no programming required since the contents of your original key are transferred to the inside of the LCD keyfob so the car thinks it's still the original remote controlling it. I explain how this key fob works in more detail on the first video here ruclips.net/video/kNcuTaQGcCw/видео.html Hope this helps, Cheers!
Hi Henry! Remember the LCD Key fob will not add or turn on extra security features on your car. The features your car came with will transfer over from your old key fob to the new key fob (remember it reuses your old key fob insides). Here is the original video where I explain this in more detail ruclips.net/video/kNcuTaQGcCw/видео.html Hope this helps, Cheers!
Hi Luis! this video covers the differences between the original Smart Key (X-500) and the (X-900). Make sure to watch thru the end for a secret feature we found in the X-900! Hope this helps and thanks for watching bud!
Hi Omar! remember the LCD key fob is an upgrade for your existing Fob it is not a stand alone device. The original key fob contents are still contained within the LCD Key Fob body. Here is the original video where I cover this in more detail ruclips.net/video/kNcuTaQGcCw/видео.html Hope this helps, Cheers!
Hi Cardiee! not sure what you mean about a "start addon" but this remote does not add remote start unless your car already has it. However remote start can be added to the car using a kit like this one amzn.to/2Z12Xsr The contents of the remote start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs. Hope this helps and thanks for watching bud!
Hi Eternal Empath! you only need the remote start function if you want to use the remote start function on the LCD remote. This remote does not add remote start unless your car already has it. However remote start can be added to the car using a kit like this one amzn.to/2Z12Xsr The contents of the remote start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs. Hope this helps and thanks for watching bud!
Hi K! There is no programming required since the contents of your original key are transferred to the inside of the LCD keyfob so the car thinks it's still the original remote controlling it. I explain how this key fob works in more detail on the first video here ruclips.net/video/kNcuTaQGcCw/видео.html Cheers!
Hi K! Normally you can only fit the contents of one key fob to the inside of the LCD keyfob. I explain how this key fob works in more detail on the first video here ruclips.net/video/kNcuTaQGcCw/видео.html Cheers!
Hi cobra snoop! The price varies depending if it's on sale and where you are located in. I put the link to it in the video description if you like to check it. Hope this helps, Cheers!
Hi Isaiha! This remote does not add remote start unless your car already has it. However remote start can be added to the car using a kit like this one amzn.to/2Z12Xsr The contents of the remote start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs. Hope this helps and thanks for watching bud!
Hi Rick! Take a look at your manual (page 7 if I remember correctly) it shows the file format as PNG, naming convention, size and resolution requirements. It also has FitcamX contact info if you need them to help you with your image. Hope this helps, Cheers!
Hi CottonMouth! This is an universal kit for all cars and models that use a remote with buttons, if your remote has normal buttons then it should works. Hope this helps, Cheers!
Hi John! If your current remote has a button that activates the sliding door, then it should be able to. The smart LCD remote just presses the button for you (electronically) regardless of the button function (the smart remote doesn't know what the button activates or does, it just knows that it has to activate whatever button you have pressed on the touchscreen on the physical button of your old key fob) Hope this helps, Cheers!
How'd you get the custom car image onto the device? No matter how I format the size and aspect ratio of my images, I can't seem to get the key fob to recognize the images.
Hi ctuan13! Take a look at your manual (page 7 if I remember correctly) it shows the file format as PNG, naming convention, size and resolution requirements. It also has FitcamX contact info if you need them to help you with your image. Hope this helps, Cheers!
@@AlexAutoFun Interesting, my manual only contains instructions for logo file modification (which I got to work with some difficulty), but the section about the car image file is devoid of any detailed instructions.
Hi ctuan13! correct, the instructions only show you the requirements of the image, the actual process for manipulating the image will vary depending on what program is used for resizing and converting the image. The easiest way if you are having trouble with it is just to email FitcamX, they may be able to walk you thru that process. Hope this helps, Cheers!
I'm also having problems getting the car model uploaded to the smart key. The directions are very vague and no matter how it's formatted the image doesn't download into the fob. I've tried several different image editors and dimensions are correct along with png file. What's the email for them to edit image as I'm about to return this item for not working correctly.
@@AlexAutoFun really want to get one but doesn't have professional people in my country to do this. Plz point me to your video step by step tutorial to solder.
@shadoe1l0 Hi shadoe1l0! Yes I do have a full series of video showing how to use a solder iron then basic soldering followed by advanced soldering techniques to be able to solder the LCD KeyFob. Stay tuned, Cheers!
Hi Ravie Meerza! It should, this is an universal kit for all cars and models that use a remote with buttons. I placed the link to the X-900 in the video description along with the discount code. Hope this helps and Cheers!
Hi Alex, there are 2 versions, the standard range and the extended range version (I put links to both in the video description) Additionally the Keyfob let's you customize how much range you want (as shown in the video) in case you want the car to lock and unlock closer to you walking away from the car (some people prefer that for safety) or farther. Hope this helps, Cheers!
Hola Alexander! Este en un kit universal, no es especifico a una marca. Si tu control remoto tiene botones es posible convertirlo. Saludos desde California!
Hi Xue Xiong! if your after market alarm remote has buttons the it should, this is an universal kit for all cars and models that use a remote with buttons. Hope this helps and thanks for watching!
Hi James! This is an universal kit for all cars and models that use a remote with buttons, if your remote has normal buttons then it should work. Cheers!
Hi kkmmk 1966! This is an universal kit for all cars and models that use a remote with buttons, if your remote has normal buttons then it should works. Hope this helps, Cheers!
Hi Mohammad! If your convertible uses a remote with buttons, then it should. This is an universal kit for all cars and models that use a remote with buttons. Hope this helps and thanks for watching friend!
Hi Leona! nope, it only includes the Car logos and Car pictures I showed on the video. However you can load your own custom car pic and logo as shown on the video. Hope this helps, Cheers!
Hi Handsome29020 Me! The price varies depending if it's on sale or if they have a coupon going on for it. I put a link to it on the video description if you want to check. Hope this helps, Cheers!
Hi Otis! ah yes take a look at page 7 of your instruction manual and you will see how to upload a custom picture as well as FitcamX's contact information if you still need help with this process (It's basically find an image you like, confirm it's the right size, connect the KeyFob to PC and drag picture to KeyFob). Hope this helps and thanks for watching!
Hi! You can follow the instructions included with the remote to create and add the picture. You can also contact Fitcamx if you need help with this step (their contact info is also in the instructions) Cheers!
Hi Lack! The price varies depending if it's on sale or if they have a coupon going on for it. I put a link to it on the video description if you want to check. Hope this helps, Cheers!
Hi Jerry! I used an existing image I had but you can create your own image from scratch using a graphic design program. There are also websites that can design the image or logo for you such a canva or fiverr. Hope this helps, Cheers!
Hi Jose! You can follow the instructions included with the remote to create and add the picture. You can also contact Fitcamx if you need help with this step (their contact info is also in the instructions) Cheers!
Hi Paulo! This is an universal kit for all cars and models that use a remote with buttons, if your remote has normal buttons then it should works. Hope this helps, Cheers!
@@paulopereira4880 Hi Paulo! It contains it's own battery, it's rechargeable, here is the original video that covers the details ruclips.net/video/kNcuTaQGcCw/видео.html Hope this helps, Cheers!
@@paulopereira4880 Hi Paulo! the OBD2 adapter is optional, you only need it if you want to use the comfort function (unlocking and locking the door automatically) Hope this helps, Cheers!
No pude acer que FUNCIONE el X600 no reconoce ala llave de mi carro , me mandaron el manual del X500 , mi carro el un Ford explorer xlt 2012 con la llave de lámina pero le puse el botón start stop, en teoría no debería de aver ningún problema ya que es solo mover el board de mi llave y soldar y listo pero no asia absolutamente nada , era como que si no le llegara corriente ami vieja llave porque al presionar los botones de la vieja llave tampoco asia nada
Hola Fredi! si hay algo raro ahi, recomiendo que contactes a FitcamX lo mas pronto possible (antes de que expire la guaratia) Azi te pueden ayudar con consejo technico y caminarte a travez de los pasos technicos para resolver problemas. Espero esto ayude, Saludos!
@@AlexAutoFun I have another question if you do not mind answering. I have comfort access on my key fob, when I star driving the vehicle wants to lock the doors automatically but the key fob wants the doors open because the comfort access. There is a way to fix the little issue so I can keep the doors locked once I start driving ?
@Luis Pagan Hi Luis! That is very strange, it shouldn't do that (mine doesn't). I would recommend contacting FitcamX for tech support, they may be able to walk you thru some trouble shooting steps. Hope this helps, Cheers!
Hi Sabir! This is an universal kit for all cars and models that use a remote with buttons, if your remote has normal buttons then it should work. Cheers!
Hi 87 Cozart! Uploading custom logos to the Key Fob will slow it down however here is the original version if you want to compare ruclips.net/video/kNcuTaQGcCw/видео.html Hope this helps and thanks for watching bud!
Hi using an adapter for the obd2 port makes me feel like there could be a potential for someone to easily gain access to your car so if some one has the same smart key fob can have access to my car ? can you please explain and please please the young lady with boney ears make it unprofessional and tipcal american cheep merchandise add not advise and review my great thanks to your serious advise but back off bony ears young lady please
Hi Monfreh! Nope someone else with another LCD key fob cannot gain access to your car. The OBD2 adapter is only using the OBD2 port for power. It does not communicate with the car's OBD port. I actually just made a video on this topic if you want to see this in more detail ruclips.net/video/aV5jQovoaCI/видео.html But yeah it's crazy simple how it works however it gives the appearance that is very complex and that is interfacing somehow to your car, however you can also use the LCD remote without the OBD adapter if you don't need the comfort feature. Hope this helps and thanks for watching bud!
My current key fob has a "regular" key in it. This will unlock the door should the battery die. Would this just become obsolite? And I would not have that with the new key fob?
Hi Sam! correct there is no space for a physical key inside of this remote. I think I would be neat if the next version has space for it, but I don't know if it will happen as this LCD fobs are getting smaller and smaller (by demand) But I do find one that has space for a key I will let you know bud!
Hi Everybody! If you like me to do the upgrade, you can find more information in the video description. And here is my review of the X-500 LCD Key Fob ruclips.net/video/kNcuTaQGcCw/видео.html Cheers!
Can you leave the battery in the key fob from the vehicle instead of attaching power wires to it? Maybe extending the battery from the led unit?
@@CrySomeMorePlease Hi Google Sucks! Nope a normal remote battery (normally CR2032) does not have enough power to run the LCD Key Fob or to extend it's battery life. Hope this helps, Cheers!
@@AlexAutoFun in the hidden menu after 5 power button presses, in the Y1_SET menu… what does the option “TOUCH HOLD” under the brightness option do?
@@CrySomeMorePlease Hi Google Sucks! I unfortunately don't know the official answer but if I had to guess, it's likely an option to have the remote hold the button down on the original remote if you hold your finger on the screen virtual button (normally it appears the Key Fob presses the button on the original remote once when you touch the screen virtual button) And if I ever can confirm from FitcamX what the official description of this function is, I will update this comment for you. Hope this helps, Cheers!
@@AlexAutoFun thanks for the reply. Yeah I received one the other day and got it all soldered together but couldn’t figure out what that function did.
Just ordered mine. can't wait for it to arrive. I ordered two imposter remotes from e-bay and they don't have near the features this should.
Hi Delwyn! nice! congrats on your new LCD remote, I still get some many questions when people spot me using me LOL It definitely catches people's attention! 😁
So mine came in... They were able to get me all connected. I had many questions and FitcamX was responsive and helpful. This thing is awesome. Thanks guys. If you are a car person this is a must have.
@@DelwynGarriette Awesome! congrats on your new LCD remote, I still get a lot of attention whenever someone sees me using it LOL
I just bought one of these for my Infiniti but I don’t know which one is the positive and the negative for the power I tried hooking it up but it’s not turning on so I believe I’m doing something wrong lol
Hi Lester! oh oh! be very careful you don't to damage something, positive on a battery is normally indicated by a "+" however I would strongly recommend taking the key to a place that already works with electronics, they can do the transfer in the blink of an eye where I would take way longer for someone who hasn't done soldering before. However If you still want to attempt, I have a video coming showing how I soldered mine. Stay tuned bud!
Thanks for this post.. 2 questions:
Does this have a phone app controller a d can the commands be voice activated/prompted like Siri??
You're welcome! Ah no it does not support a phone App nor voice commands. Cheers!
So would a 2021 Chevy Silverado key fob be transferable? What about the key that sits inside my old fob?
Hi K! This is an universal kit for all cars and models that use a remote with buttons, if your remote has normal buttons then it should work. Regarding the physical blade, there is no space for it inside the LCD keyfob, Cheers!
I just bought one of x900 remotes. Should be here within the next 2 days. One thing none of the videos touch on is the signal strength. What's the distance for remote start?
Hi Robert! The range is determined by your original car's remote range (remember the LCD key fob reuses your old remote) Hope this helps, Cheers!
Where can I buy it online?
I bought mine off of Amazon
It doesn’t matter if my car is a Ford Figo 2019?
Hi ricardo! It shouldn't, this is an universal kit for all cars and models that use a remote with buttons. Hope this helps and thanks for watching!
Love the vid, but does the the chip of a Mazda 2017 fits? Thanks
Thank you Jonathan! Ah so far I have not run into any PCB too large for the FOB, there is quite a bit of space in there, here are the measurements 55mm x 34mm x 6mm (actually it's a total of 66mm long, but the space towards the end tapers from 34mm down to 26mm so I usually don't count that area). Cheers!
great video! thanks.
1. I have a mitsubishi lancer 2015 with immobilizer chip in the key fob (with regular key in it). what do i do with the chip from the original remote? put it in the lcd remote? will there be room for it in the lcd?
does the chip needs to be close to the pcb board in order for the car to start, or just close to the ignition key hole?( i have only one original key so i can't put one chip in the lcd and one in the original key fob.)
i understand i probably will have to carry both key fobs to start the car, until i switch to remote start hopefully in the future .
2. will the Push Start Kit Add On, you put in the description EC003, fit for my car?
You're welcome! Ah regarding the chip built into the physical key, you are correct, the LCD keyfob turns your current keyfob into an LCD keyfob, it does not have room inside to carry a key. So if you need a key to start your vehicle you will still need that key to start it once you upgrade to the LCD keyfob. Regarding adding push start later, yes that can be added using a kit like this one amzn.to/2Z12Xsr The contents of the remote start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs. Hope this helps, Cheers!
@@AlexAutoFun thanks!
regarding the push start kit, since i would need to bypass the immobilizer. i understand that one key needs to be in the ignition to unlock the wheel and another key to be inside the bypass, and since i only have one original key, can i split it, so that the key itself will be in ignition and the chip in the bypass?will it work?
furthermore, will it be possible to tape the tiny immobilizer chip right next to the ignition hole instead of buying the bypass?
Ah I wish I could help with that, but I seen so many variations in how the immobilizer works and ways to bypass it, seems it's almost different for every car LOL So while I'm familiar with IMMO, I can't confirm which method would work best. However what I can recommend is to contact local installers who install car alarms for a living, they may be able to point you in the right direction and also give you a quote (I did one remote start install a very long time ago and I swore I would never do another again, so many wire splices, soldering and dealing with the IMMO LOL) I did recently find another remote start system that is plug and play here you go ruclips.net/video/JHAYqbHpbNM/видео.html They may be another resource to check with regarding your specific case if you go with one of their systems. Hope this helps, Cheers!
@@AlexAutoFun thanks!
@@שיעוריהרבמשהביננשטוקשליטא You're welcome Bud!
I really like it, but just wish it were a bit smaller
Hi RazoE! It's size is near identical to the BMW LCD key you get with the 7 series. The size is mostly limited by the need for the new key fob to fit your old key circuit board inside and the size of the touchscreen itself. But I wouldn't doubt it will continue to get small like all technologies do. Hope that makes sense and thanks for watching bud!
Wi ypu sti be able to use your old key fob as well
Hi K! Remember the old keyfob is actually inside of the new LCD keyfob (details on the upgrade towards the end of the video), Cheers!
Thank u too much
How could I know if suitable for my car
KIA PICANTO 2006
Hi Naif! You're welcome! It should, this is an universal kit for all cars and models that use a remote with buttons. Hope this helps and Cheers!
@@AlexAutoFun ًsorry but do u have link to buy it
@@naifnsr Hi Naif! yes I placed the links to the kit in the video description. Cheers friend!
Hi Alex, can you share the remote start link kit please.
Hi Ahmed! I placed the link to in the video description. Cheers!
Whats the link to the remote start option if we don't have remote start
Hi N! Remote start can be added to the car using a kit like this one amzn.to/2Z12Xsr The contents of the remote start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs, Cheers!
Physical buttons will still work after the screen dies but will the smart fob still start the car on a push to start with a dead screen ?
Hi Jordan! Correct, Fitcamx rates the battery on the X-900 at about a week with screen use and 3 months without screen use. They also have extended battery life versions, they rate the X-600 and X-700 at about 2 weeks with screen use and 3 months without screen (I put a link to them in the video description). Hope this helps, Cheers!
Hello is there anyway to make a old car key with blade have a digital screen with blade still?
Hi Checo! Unfortunately there is no space inside the LCD keyfob for a blade key. The key can be carried separately like a traditional setup up or if you want to eliminate the key completely, a push start system can be added to the car using a kit like this one amzn.to/2Z12Xsr The contents of the remote start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs. Cheers!
where can I find a list to see it it works for my cars?
Hi Tom! this is an universal kit for all cars and models that use a remote with buttons. Hope this helps and thanks for watching!
My lcd don't work anymore, any idea how to reboot the key
Hello, thank you very much. I bought the TK900 model, but there are no parameters to record the car logo on the screen
Hi Elmar! you can see how to change the logo at aprox the 4:30 mark. Cheers!
Hey, how’s your experience going with your purchase?
Hi, this key fob is working for renault because I don't find anything about this? Thanks!
Hi Floria! This is an universal kit for all cars and models that use a remote with buttons, if your remote has normal buttons then it should work. Cheers!
My remote have 5 buttons includingthe remote auto start do I keep all of them
Hi aztecspike! This Key Fob supports a maximum of 4 buttons which means you would have to decide the 4 buttons most important to you and which one you are willing to give up. Maybe we will see a 5 button version (assuming there is enough demand) and if enough people request this from FitCamX. Hope this helps, Cheers!
Can I continue using the OBD that comes with the key as a regular OBD to read info from the car?
Hi Kanudos! Nope, the OBD2 adapter is only used for the comfort function (locking and unlocking the doors). Here is a OBD2 dongle scanner if you need one ruclips.net/video/rGWSxEXFbOg/видео.html Cheers!
@@AlexAutoFun Thank you! I actually have that exact OBD scanner. But I wanted to know if the LCD Key OBD can be used to read engine oil and coolant temperature. ? Thanks
@kanudoss You're welcome Kanudos! Ah nope, the OBD2 adapter is only used for the comfort function (locking and unlocking the doors). Cheers!
When u crank car , what’s the distance of not getting a signal ? And is it 2way?
Hi Alexander! The range is determined by the range of your original remote (remember this uses the original remotes transmitter) Here is the original video where I cover this in more detail ruclips.net/video/kNcuTaQGcCw/видео.html Hope this helps, Cheers!
Will this work on 2018 yukon for as the trunk or rear window?
Hi Shamir! it should be able to assuming your remote currently has that function. Remember the smart LCD remote just presses the button for you (electronically) regardless of the button function (the smart remote doesn't know what the button activates or does, it just knows that it has to activate whatever button you have pressed on the touchscreen on the physical button of your old key fob) Cheers!
@@AlexAutoFun thanks bro!
@@Shamir-hl8xf You're welcome Bud!
Can you use these for
Key fobs that have an actual key 🔑 and fob ( unlock or lock at a distance )
Hi Slash111111! Yes you do not need keyless entry for this auto lock and unlock (as long as your current car remote can lock and unlock the car when you push a button) And If you decide to go completely keyless in the future, this can be done using a kit like this one amzn.to/2Z12Xsr The contents of the push start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs. Hope this helps bud!
Hello do I still have to buy the remote engine start for my 2019 BMW G20 M340i XDRiVE to switch on remote engine start because I haven’t switched it on with BMW but does that key fob switch it on ?
Hi Frankie! This Key fob does not add remote start unless your car already has it. However remote start can be added to the car using a kit like this one amzn.to/2Z12Xsr The contents of the remote start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs. And here is the advanced the version of this key fob where they added more options for automating remote start ruclips.net/video/m94fFgXrJEY/видео.html Hope this helps, Cheers!
Nice but too bulky. Anyway question, so if i had one of this key fob can i just use it with someone else’s car?
Hi Aude! It's size is near identical to the BMW LCD key you get with the 7 series, it actually looks like a straight copy of it lol. But if you don't need it to look like a BMW key here is the Mini version amzn.to/3qrjeBN And I imagine that it will continue to get even more smaller like all technologies do overtime. Regarding using with multiple vehicles, nope it can only control the car that the original remote belongs. Hope this helps, Cheers!
hello, which image format should be inserted, I tried everything as per the instructions, but it doesn't work
Hi Zeljko Porobic! take a look at your manual (page 7 if I remember correctly) it shows the file format as PNG, naming convention, size and resolution requirements. It also has FitcamX contact info if you need help converting your image. Hope this helps, Cheers!
My car needs the lock button to be pressed 3 times for the remote start to function. Can i set that up in the menu so it does it automatically when i press start?
Hi Jose! yes you can customize the remote start option to automate this process for you reducing the number of clicks, you can see this at the 6:20 mark. Hope this helps and thanks for watching bud!
Hello. So how do you start the car if its not OEM push button?
Hi RusWolf! You would start the car like before with a normal key, remember the LCD Key fob does not add push button start unless your car already has it. However push start can be added to the car using a kit like this one amzn.to/2Z12Xsr The contents of the remote start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs. And here is the advanced the version of this key fob where they added more options for automating remote start ruclips.net/video/m94fFgXrJEY/видео.html Hope this helps, Cheers!LOL. Cheers!
What if i got remote start but on the mercedes app bot thru the key. Would’ve still work?
Hi Luis! If your current car remote has remote start then it should be able to, the smart LCD remote just presses the button for you (electronically) regardless of the button function (the smart remote doesn't know what the button activates, it just knows that it has to activate whatever button you have pressed on the touchscreen or on it's physical buttons) Hope this helps and thanks for watching!
Hello I just want to know if the red and black wire that's connected to where the battery is supposed to be is the function to remote start the car?
Hi Aaron! I have converted two G840H's already and just received a 3rd one that also has screws (video showing the conversion on it coming!) but it's possible that yours may not have screws, sometimes I do see small differences between product coming from the manufacturer directly vs Amazon (where I get all my stuff) that may be a possibility (and even within Amazon stock there could be different batches of the product). I'm currently working on the mounting solution for dash cams that do not have screws, stay tuned for that video and cheers bud!
What would the battery life look like if i always used the keyless access and very very very rarely used the screen/buttons. I know its hard to say but a rought guess?
Hi Emiliano! Fitcamx rates the battery on the X-900 at 1 week with screen use and 3 months without screen use. They also have extended battery life versions, they rate the X-600 and X-700 at 2 weeks with screen use and 3 months without screen (I put a link to them in the video description). However if you don't plan to use the screen and primarily want the auto lock and unlock feature also consider a system like this one amzn.to/3VZP9H0 Since it was designed to be used without a screen it is very likely it's battery life will exceed any of Fitcamx LCD Key Fobs. Hope this helps, Cheers!
I know thos video is a year old do you know of any new models or newer ones of these that have came out?
Hi Rickie! I linked all the different variants in the video description so you can compare them. Hope this helps, Cheers!
Are you able to program it to multiple vehicles
Hi sherridanj! nope it can only support one vehicle, however I can imagine that soon we will see one that will support multiple cars and once they do have it, I will review it for your guys! Stay tuned bud 😁
My car does not have push to start. I have to use a key to start the car. Can I get this and still be able to use the auto unlock based on proximity?
Hi 07freshkid70! yes you can still use the comfort system (automatic door locking and unlocking) if you car does not have push start. And if you decide to add remote start later, it can be done using a kit like this one amzn.to/2Z12Xsr The contents of the remote start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs. Hope this helps and thanks for watching bud!
@@AlexAutoFun I would like to mention though I do not have an actual push to start built into the car as factory, I did get a computstar remote start key fob added. Would the remote start function work based on have the compustar installed?
@@07freshkid70 Ah I'm not familiar with that push start system, but assuming it includes a remote with buttons then it should work. The LCD Key fob does not know what the function of the button does, it just knows that it has to push the button on your old key fob when you press the virtual button on the LCD screen. Hope that makes sense and cheers bud!
Does it have wireless charging capability? Thanks
Hi Tristan! Nope it does not (but I like the idea!). Hope this helps, Cheers!
After the fod is program....do u removed the adapter?
Hi Barber Chris! There is no programming required since the contents of your original key are transferred to the inside of the LCD keyfob so the car thinks it's still the original remote controlling it. I explain how this key fob works in more detail on the first video here ruclips.net/video/kNcuTaQGcCw/видео.html Hope this helps, Cheers!
Hi! Can LCD smart key x900 turn on anti- theft alarm?
Hi Henry! Remember the LCD Key fob will not add or turn on extra security features on your car. The features your car came with will transfer over from your old key fob to the new key fob (remember it reuses your old key fob insides). Here is the original video where I explain this in more detail ruclips.net/video/kNcuTaQGcCw/видео.html Hope this helps, Cheers!
Thx so much
You're welcome Xhenete Shabani!
So which keys is better? And whats the different?
Hi Luis! this video covers the differences between the original Smart Key (X-500) and the (X-900). Make sure to watch thru the end for a secret feature we found in the X-900! Hope this helps and thanks for watching bud!
I have a Tahoe 2011 will this work? Without having to buy expensive key fob from dealership
Hi Omar! remember the LCD key fob is an upgrade for your existing Fob it is not a stand alone device. The original key fob contents are still contained within the LCD Key Fob body. Here is the original video where I cover this in more detail ruclips.net/video/kNcuTaQGcCw/видео.html Hope this helps, Cheers!
Does the remote start addon will support lcd key fob?
Hi Cardiee! not sure what you mean about a "start addon" but this remote does not add remote start unless your car already has it. However remote start can be added to the car using a kit like this one amzn.to/2Z12Xsr The contents of the remote start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs. Hope this helps and thanks for watching bud!
The site says car must have both remote start and push to start in order to work. Is this true or can it work with push start upgraded car?
Hi Eternal Empath! you only need the remote start function if you want to use the remote start function on the LCD remote. This remote does not add remote start unless your car already has it. However remote start can be added to the car using a kit like this one amzn.to/2Z12Xsr The contents of the remote start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs. Hope this helps and thanks for watching bud!
How many keys can you program on this key fob?
Hi K! There is no programming required since the contents of your original key are transferred to the inside of the LCD keyfob so the car thinks it's still the original remote controlling it. I explain how this key fob works in more detail on the first video here ruclips.net/video/kNcuTaQGcCw/видео.html Cheers!
@@AlexAutoFun I meant how many cars can I control with this key fob? for example I own 3 cars and only want to use the one key, is this possible?
Hi K! Normally you can only fit the contents of one key fob to the inside of the LCD keyfob. I explain how this key fob works in more detail on the first video here ruclips.net/video/kNcuTaQGcCw/видео.html Cheers!
How much cost for maserati levante 2019 🙏
Hi cobra snoop! The price varies depending if it's on sale and where you are located in. I put the link to it in the video description if you like to check it. Hope this helps, Cheers!
If my car doesnt have automatic start, will the push button start still work from the fob?
Hi Isaiha! This remote does not add remote start unless your car already has it. However remote start can be added to the car using a kit like this one amzn.to/2Z12Xsr The contents of the remote start key would then be transferred to the LCD key fob that way you won't have to carry two key fobs. Hope this helps and thanks for watching bud!
Helpful 🎯
@@eternalempath9817 Glad to hear it helped bud!
Bro how to change the car logo to customize? I can’t able to upload it?
Hi Rick! Take a look at your manual (page 7 if I remember correctly) it shows the file format as PNG, naming convention, size and resolution requirements. It also has FitcamX contact info if you need them to help you with your image. Hope this helps, Cheers!
Where did you get the custom logo from? I have a SRT too.
Hi Sinan! I got off Google, if you search for images of the SRT logo you will find several come up. Hope this helps, Cheers!
Will this work on a mazda protege 1999
Hi CottonMouth! This is an universal kit for all cars and models that use a remote with buttons, if your remote has normal buttons then it should works. Hope this helps, Cheers!
What model is a a remote start sir?
Hi Christian! Remote start is an option some cars come from factory where you can start your car remotely using your key fob. Cheers!
Does this work for minivan sliding doors?
Hi John! If your current remote has a button that activates the sliding door, then it should be able to. The smart LCD remote just presses the button for you (electronically) regardless of the button function (the smart remote doesn't know what the button activates or does, it just knows that it has to activate whatever button you have pressed on the touchscreen on the physical button of your old key fob) Hope this helps, Cheers!
How'd you get the custom car image onto the device? No matter how I format the size and aspect ratio of my images, I can't seem to get the key fob to recognize the images.
Hi ctuan13! Take a look at your manual (page 7 if I remember correctly) it shows the file format as PNG, naming convention, size and resolution requirements. It also has FitcamX contact info if you need them to help you with your image. Hope this helps, Cheers!
@@AlexAutoFun Interesting, my manual only contains instructions for logo file modification (which I got to work with some difficulty), but the section about the car image file is devoid of any detailed instructions.
Hi ctuan13! correct, the instructions only show you the requirements of the image, the actual process for manipulating the image will vary depending on what program is used for resizing and converting the image. The easiest way if you are having trouble with it is just to email FitcamX, they may be able to walk you thru that process. Hope this helps, Cheers!
Should really make a video of how to do this. Alot of people are going to want this lcd remote for this feature.
I'm also having problems getting the car model uploaded to the smart key. The directions are very vague and no matter how it's formatted the image doesn't download into the fob. I've tried several different image editors and dimensions are correct along with png file.
What's the email for them to edit image as I'm about to return this item for not working correctly.
Is the x700 plug and play? Or do I still have to solder?
Hi shadoe1l0! Same as the X-500, requires soldering. Hope this helps, Cheers!
@@AlexAutoFun really want to get one but doesn't have professional people in my country to do this. Plz point me to your video step by step tutorial to solder.
@shadoe1l0 Hi shadoe1l0! Yes I do have a full series of video showing how to use a solder iron then basic soldering followed by advanced soldering techniques to be able to solder the LCD KeyFob. Stay tuned, Cheers!
Hey buddy, can this work for a 2022 subaru ascent limited??? I didn't see the link for the key fob x-900 the new one
Hi Ravie Meerza! It should, this is an universal kit for all cars and models that use a remote with buttons. I placed the link to the X-900 in the video description along with the discount code. Hope this helps and Cheers!
will this work with my 2007 cadillac dts?
Hi David! It should, this is an universal kit for all cars and models that use a remote with buttons. Hope this helps, Cheers!
How about range how long, push starter
Hi Alex, there are 2 versions, the standard range and the extended range version (I put links to both in the video description) Additionally the Keyfob let's you customize how much range you want (as shown in the video) in case you want the car to lock and unlock closer to you walking away from the car (some people prefer that for safety) or farther. Hope this helps, Cheers!
Esta disponible para sierra denali 1500 2021?
Hola Alexander! Este en un kit universal, no es especifico a una marca. Si tu control remoto tiene botones es posible convertirlo. Saludos desde California!
I don't see the engine remote start link
Hi Kanudos! Here you go amzn.to/2Z12Xsr (there are more advanced versions, this is just a basic affordable one) Cheers!
Will this work with after market alarm remote?
Hi Xue Xiong! if your after market alarm remote has buttons the it should, this is an universal kit for all cars and models that use a remote with buttons. Hope this helps and thanks for watching!
Hello can you do cadillac escalade
Hi James! This is an universal kit for all cars and models that use a remote with buttons, if your remote has normal buttons then it should work. Cheers!
can it fit cherry tiggo 7pro 2023?
Hi kkmmk 1966! This is an universal kit for all cars and models that use a remote with buttons, if your remote has normal buttons then it should works. Hope this helps, Cheers!
Will it work with convertible vehicles?
Hi Mohammad! If your convertible uses a remote with buttons, then it should. This is an universal kit for all cars and models that use a remote with buttons. Hope this helps and thanks for watching friend!
Where can i send the key fob at
Hi James, please email me for a quote, you can find my contact info in the "About" Section of my Channel. Cheers!
Does it have 1998-2002 trans am on it?
Hi Leona! nope, it only includes the Car logos and Car pictures I showed on the video. However you can load your own custom car pic and logo as shown on the video. Hope this helps, Cheers!
@@AlexAutoFun thank you
@@firewolf5680 You're welcome!
How much are these lcd key fobs
Hi Handsome29020 Me! The price varies depending if it's on sale or if they have a coupon going on for it. I put a link to it on the video description if you want to check. Hope this helps, Cheers!
And how to adjust it to the car
Hi Naif! you can see all the adjustment settings at the 4:40 mark. Hope this helps and Cheers!
How to peaches this products
Hi Dipak! I placed links to the products on the video description. Hope this helps and Cheers!
Can you please let me know how to upload a custom logo picture
Hi Otis! ah yes take a look at page 7 of your instruction manual and you will see how to upload a custom picture as well as FitcamX's contact information if you still need help with this process (It's basically find an image you like, confirm it's the right size, connect the KeyFob to PC and drag picture to KeyFob). Hope this helps and thanks for watching!
May the app name please. So i can upload car pictures
Hi! You can follow the instructions included with the remote to create and add the picture. You can also contact Fitcamx if you need help with this step (their contact info is also in the instructions) Cheers!
How much do they cost?
Hi Lack! The price varies depending if it's on sale or if they have a coupon going on for it. I put a link to it on the video description if you want to check. Hope this helps, Cheers!
How to you do custom logo
Hi Jerry! I used an existing image I had but you can create your own image from scratch using a graphic design program. There are also websites that can design the image or logo for you such a canva or fiverr. Hope this helps, Cheers!
How can we add our own logo or pic
Hi Jose! You can follow the instructions included with the remote to create and add the picture. You can also contact Fitcamx if you need help with this step (their contact info is also in the instructions) Cheers!
E para veículos eléctricos, qual o gasto da bateria do veículo?
Hi Paulo! This is an universal kit for all cars and models that use a remote with buttons, if your remote has normal buttons then it should works. Hope this helps, Cheers!
@@AlexAutoFun e o consumo da bateria?
@@paulopereira4880 Hi Paulo! It contains it's own battery, it's rechargeable, here is the original video that covers the details ruclips.net/video/kNcuTaQGcCw/видео.html Hope this helps, Cheers!
@@AlexAutoFun sim, mas e o gasto do odb para o carro?
@@paulopereira4880 Hi Paulo! the OBD2 adapter is optional, you only need it if you want to use the comfort function (unlocking and locking the door automatically) Hope this helps, Cheers!
that is, there is no setting in the menu to set the logo
Hi Elmar! you can see how to change the logo at aprox the 4:30 mark. Cheers!
Hello, is there a way to contact you????
Hi Federick! Yes, consulting sessions are available, here you go www.buymeacoffee.com/alexautofun Cheers!
No pude acer que FUNCIONE el X600 no reconoce ala llave de mi carro , me mandaron el manual del X500 , mi carro el un Ford explorer xlt 2012 con la llave de lámina pero le puse el botón start stop, en teoría no debería de aver ningún problema ya que es solo mover el board de mi llave y soldar y listo pero no asia absolutamente nada , era como que si no le llegara corriente ami vieja llave porque al presionar los botones de la vieja llave tampoco asia nada
Hola Fredi! si hay algo raro ahi, recomiendo que contactes a FitcamX lo mas pronto possible (antes de que expire la guaratia) Azi te pueden ayudar con consejo technico y caminarte a travez de los pasos technicos para resolver problemas. Espero esto ayude, Saludos!
How do you change the language to English?
Hi Luis! you need to access the secret menu as explained at the 8:50 mark to change languages, brightness etc. Hope this helps, Cheers!
@@AlexAutoFun thanks a lot for the info, I change the language in no time 👍
@@prptropical You're welcome Luis!
@@AlexAutoFun I have another question if you do not mind answering. I have comfort access on my key fob, when I star driving the vehicle wants to lock the doors automatically but the key fob wants the doors open because the comfort access. There is a way to fix the little issue so I can keep the doors locked once I start driving ?
@Luis Pagan Hi Luis! That is very strange, it shouldn't do that (mine doesn't). I would recommend contacting FitcamX for tech support, they may be able to walk you thru some trouble shooting steps. Hope this helps, Cheers!
Boaaaaaaaa❤
No Lexus Logo ?
Hi L! The Lexus logo is included, you can see it listed at around the 4:20 mark. Cheers!
The lag is sickly
Subaru 22 ceint
Pls I want to by one
Hi Ade! I put the link to the LCD Keyfob in the video description. Hope this helps, Cheers!
Salam mend BMW f30
Hi Sabir! This is an universal kit for all cars and models that use a remote with buttons, if your remote has normal buttons then it should work. Cheers!
It looks laggy
Hi 87 Cozart! Uploading custom logos to the Key Fob will slow it down however here is the original version if you want to compare ruclips.net/video/kNcuTaQGcCw/видео.html Hope this helps and thanks for watching bud!
Hi using an adapter for the obd2 port makes me feel like there could be a potential for someone to easily gain access to your car so if some one has the same smart key fob can have access to my car ? can you please explain and please please the young lady with boney ears make it unprofessional and tipcal american cheep merchandise add not advise and review
my great thanks to your serious advise but back off bony ears young lady please
Hi Monfreh! Nope someone else with another LCD key fob cannot gain access to your car. The OBD2 adapter is only using the OBD2 port for power. It does not communicate with the car's OBD port. I actually just made a video on this topic if you want to see this in more detail ruclips.net/video/aV5jQovoaCI/видео.html But yeah it's crazy simple how it works however it gives the appearance that is very complex and that is interfacing somehow to your car, however you can also use the LCD remote without the OBD adapter if you don't need the comfort feature. Hope this helps and thanks for watching bud!
no girl goodbye
LOL she is in the video 😁
@@AlexAutoFun where she @
My current key fob has a "regular" key in it. This will unlock the door should the battery die. Would this just become obsolite? And I would not have that with the new key fob?
Hi Sam! correct there is no space for a physical key inside of this remote. I think I would be neat if the next version has space for it, but I don't know if it will happen as this LCD fobs are getting smaller and smaller (by demand) But I do find one that has space for a key I will let you know bud!