@@charlesludwig9173 you got it & I've been doing it for almost 40 years with my 7mm rem mag A-bolt . It's a sporter weight barrel that shoots 1/2 -3/4 inch groups with just about everything I load for it . I was just joking around with any newbies that think belted cartridges won't shoot . Cheers man
7mmRm is probably my favorite cartridge. My Rem700 with a 26" Broughton is a vg blaster, but I will probably have you build me one after the 300NM is finished.
Dam you do nice work . Those Brux barrels are the choice of lots of F class guys . Love to know what powder you’re using in both 7 and 6.5 x .284 . My experience as a benchrest competitor the 6.5 needs more powder to close up groups , I think you’re speed is low . Thanks for all you bring to us !😊
I heard form someone for jewel Supposedly, and they said the people that made the Springs for them retired And they would like to get back into manufacturing, but they have work to do. That's about it in a nutshell. I have a few of their Springs.
Why are all bullets not in the same hole? Think? It’s ALWAYS from inconsistency somewhere and thus that inconsistency must be addressed wherever it’s produced: from rifle, ammunition, or marksmanship. My 6.5/284 delivers X-Ring hits on the MR-31 Target from irons mostly because I have a Princess and the Pea sensitivity for natural point of aim, magnificent handloads, a huge MOA wind constant, and a match conditioned rifle. I have done very well with this system in 1000 Yard NRA Long Range Competition, match rifle and any/any divisions, earning the American High Power Rifleman in Long Range Award. At any rate, I enjoyed this video. The author clearly understands what’s important to good shooting. The only thing to add is if you have a match conditioned rifle and you are shooting match grade ammunition and yet are not getting.5 MOA performance you might want to learn how to analyze marksmanship error via call/strike corollary. This process will reveal all position and act of firing sources of error, like poor trigger control or some inconsistency in shooter relationship to gun and ground.
If you are at an outdoor range there will be at least some environmental inconsistencies. But you are right about .5 MOA from a bench being an achievable standard.
@@TheCodyO yes, all of my shooting is outdoors, mostly NRA Long Range where wind must be accurately appraised and countered. At any rate, countering wind and other environmental conditions like slope are marksmanship concerns falling into factors which affect trajectory. Thanks for reminding me of this omission.
Three shots, one hole. It’s not going to get any better. Four groove vrs five groove vrs six groove barrels. Would really like to know your thoughts on the matter. Maybe subject for a video? Appreciate your content.
you can determine how good a bullet is gonna shoot by the marks left by the rifling? no way. you may have a some correlation there, but no way do you have causation.
@quarterminutemagnums Dear sir- listen here, you have lots of experience with a correlation, lol. im sure there are other things having more significant effects.
What powder brass and primer are you using in those handloads for the first bughole group in 7RemMag with 180 Berger VLDs? I have some of those for my 7RemMag but currently shooting the 168 BVLD at 3000fps with Retumbo. My barrel is a Krieger
@@quarterminutemagnums I checked the website. I saw targets and one with the 7RemMag and 180VLD but no data other than Bartlein 1-9 and "no load workup" dated 2/13/16
![These Copper Bullets REALLY Impressed Me....[.243 Remington Core-Lokt Copper]](http://i.ytimg.com/vi/L4BvtK8JNAw/mqdefault.jpg)
I give all the credit to your little helper... Seriously that 7 Rem Mag was super impressive.
Thanks....................
2 more incredible builds, range proven. I always enjoy your videos.
Great video! The barrel engraving is very nice.
Thanks...............
Love your rest I have the same one
Wow does that rifle shoot or what !?!? You proved it again that belted mags can't shoot . Love the videos & all your tips ! Thanks and cheers
All belted mags can be made to shoot just by adjusting resizing die to headspace case on case shoulder rather than belt.
@@charlesludwig9173 you got it & I've been doing it for almost 40 years with my 7mm rem mag A-bolt . It's a sporter weight barrel that shoots 1/2 -3/4 inch groups with just about everything I load for it . I was just joking around with any newbies that think belted cartridges won't shoot . Cheers man
Dear Sir - built properly, the belt is irrelevant. Thanks.......
7mmRm is probably my favorite cartridge. My Rem700 with a 26" Broughton is a vg blaster, but I will probably have you build me one after the 300NM is finished.
Your builds are very impressive! Awesome what you are getting from a modernized 7 mag!! What contour and length is that Brux barrel?
Dear Sir - we use custom contours............thanks.
Amazing accuracy and Chronograph numbers . 👍Why mess with that ?
Dam you do nice work . Those Brux barrels are the choice of lots of F class guys . Love to know what powder you’re using in both 7 and 6.5 x .284 . My experience as a benchrest competitor the 6.5 needs more powder to close up groups , I think you’re speed is low . Thanks for all you bring to us !😊
Dear Sir - agreed. But, no load work; just checking our work/barrels. Thanks.
@@brucegillespie654 most accurate powder I found for 6.5/284,is RE22.
Hey you're really good at these left handers! I shoot left hand
Dear Sir - We actually build a lot of left-hand customs...................thanks.
Seems like them ole 700’s you been working on is the real deal!!!
Dear Sir - with a lot of work, they can indeed shoot. Thanks.
I heard form someone for jewel Supposedly, and they said the people that made the Springs for them retired And they would like to get back into manufacturing, but they have work to do. That's about it in a nutshell. I have a few of their Springs.
Thanks for the info..............
Wow that 7 rem mag shoots lights out. What rest are you using?
Old Hart............thanks.
Amazing video. How much to build a 7 mag like this with a brooks barrel?
Dear Sir - Brux; it depends on the other components. Contact us..........thanks.
Why are all bullets not in the same hole? Think? It’s ALWAYS from inconsistency somewhere and thus that inconsistency must be addressed wherever it’s produced: from rifle, ammunition, or marksmanship. My 6.5/284 delivers X-Ring hits on the MR-31 Target from irons mostly because I have a Princess and the Pea sensitivity for natural point of aim, magnificent handloads, a huge MOA wind constant, and a match conditioned rifle. I have done very well with this system in 1000 Yard NRA Long Range Competition, match rifle and any/any divisions, earning the American High Power Rifleman in Long Range Award. At any rate, I enjoyed this video. The author clearly understands what’s important to good shooting. The only thing to add is if you have a match conditioned rifle and you are shooting match grade ammunition and yet are not getting.5 MOA performance you might want to learn how to analyze marksmanship error via call/strike corollary. This process will reveal all position and act of firing sources of error, like poor trigger control or some inconsistency in shooter relationship to gun and ground.
Dear Sir - very good, thank you.
If you are at an outdoor range there will be at least some environmental inconsistencies. But you are right about .5 MOA from a bench being an achievable standard.
@@TheCodyO yes, all of my shooting is outdoors, mostly NRA Long Range where wind must be accurately appraised and countered. At any rate, countering wind and other environmental conditions like slope are marksmanship concerns falling into factors which affect trajectory. Thanks for reminding me of this omission.
Come on wanted to see the last two shots. Afraid they would screw the pooch on that three shot group???😂
Dear Sir - if you are a competitive bench-rest level shooter, you are welcome to do our testing for us...............seriously. Contact us.....thanks.
yeah, he's afraid to look bad.
Three shots, one hole. It’s not going to get any better.
Four groove vrs five groove vrs six groove barrels. Would really like to know your thoughts on the matter. Maybe subject for a video?
Appreciate your content.
Dear Sir - very deep subject...............thanks.
Mabey i missed it somewhere in the video, but what powder are you using?
Targets appear on our web-site; Quarter Minute Magnums. Thanks...........
what bore guide is that I need a good one for my 6.5x284
We craft custom bore guides for all our complete builds....................thanks.
@@quarterminutemagnums do you sell them? Thank you
@@magwamagwa45110 Yes, but we need the rifle to get the fit perfect. Phone us.............thanks.
@@quarterminutemagnums will do i live in the area thanks
7mm Mauser velocities?
We are not doing load work ! ! !
Need some advice , I’m in the market for a new Chronograph. Which unit do you recommend? Thank you Sir🙏🏻
He has an oehler and uses the Garmin now. What does that tell you. The Garmin is the one to get at this point.
@@robertmajors1737 What does that tell you ??? Are you getting smart with me ??
@@robertmajors1737What does that tell you ? I suggest you leave your lip and your tone for your kids and obese wife . Understood ? Watch your lip .
Garmin.............thanks.
Play nice.................thanks.
Your blog say 7mm rem mag. Your vid shor 6.5 06. What is it?
What's a Blog?
Because it's a brux😅😅😅😅😅😅😅
you can determine how good a bullet is gonna shoot by the marks left by the rifling? no way. you may have a some correlation there, but no way do you have causation.
Dear Sir - agreed theoretically; but my experience indicates otherwise. Thanks...
@quarterminutemagnums Dear sir- listen here, you have lots of experience with a correlation, lol. im sure there are other things having more significant effects.
@@reloadingfun Dear Sir - possibly; you pay for the experiment and we will find out. Thanks........
What powder brass and primer are you using in those handloads for the first bughole group in 7RemMag with 180 Berger VLDs? I have some of those for my 7RemMag but currently shooting the 168 BVLD at 3000fps with Retumbo. My barrel is a Krieger
Targets with data are on our web-site; Quarter Minute Magnums. Thanks....
@@quarterminutemagnums I checked the website. I saw targets and one with the 7RemMag and 180VLD but no data other than Bartlein 1-9 and "no load workup" dated 2/13/16
My point is that your just a showman trying to justify exorbitant pricing when a Tikka can do as good or better.
Come and prove it, on camera, with multiple witnesses............phone us.
Damn glad I don’t work with that dude.
Agreed, no wimps allowed.
@@quarterminutemagnums 😂🤣
@@quarterminutemagnums Hey Hey Nancy be nice to
11.52 not touching. Are you blind?
No deaf..............thanks.
Accuracy good need to add bout 400 fps with them 7mm 08 faster than that
Speed vs Accuracy. ☆
@fjb4932 easy to get both
You need pressure equipment if your 7mm-08 is pushing 180g's over 2,900! Or, life insurance!!!!!!!!!!!
@@quarterminutemagnums when I win the lotto and defect from Canada, I will have you build me 7 rem. Maybe also a 7 08 that shoots 4000fps😂
@@quarterminutemagnums na