Words can't not describe on how much I'm grateful for you thanks to you how I was able jailbreak my PS4 thanks to you because I was about to give up because the frist app wasn't working for me until I used the second app so thank you so much
The program writes about a successful download, but the inscription Pppwn and GoldHena does not appear on the console itself. Doing everything according to the instructions does not work
Connect and disconnect the cable multiple times, untill it works, i had this problem at my first try and it was just the connection of the cable. Now its working fine. Also, do this on the pc port.
i got a ps4 slim on 11.0 and i've tried pppwn 1.5/1.7 and npcap 1.6/1.79 and two different usb sticks in fat32/exfat and i either get a "PacketSendPacket failed" error loop on 1.7 or i get to stage 4 with 1.5 but goldhen notification never pops up and i don't get a debug menu. is my ps4 slim just not jail breakable?
i have the exact same issue on my ps4 rn. im on pppwn 1.9 with npcap 1.79 and i keep getting this error on stage 0 : PacketSendPacket failed: A device attached to the system is not functioning. (31). if you figure anything out please respond :)
@@davidm8186 i just tried pppwn 1.9 with npcap 1.79 and GoldHEN_v2.4b17.3 and still luck. tried a different Ethernet cable and both usb ports (i know both ports work) and still nada. even if pppwn does succeed there is no jb happening. my model is also down as working on 11.0 on the spreadsheet available... really the only other thing i can do is to try a different pc/laptop. i'll try and update but i'm not too hopeful...is your model a slim? also have you tried the "lite" version? i haven't yet...
@@Kamlon_Corner do you know if the issue i stated before with error 31 is also related to the hdd. i tried following your tutorial with pppwn go but i still get the same error. i also used 2 different ethernet cables and still no luck. if not do you know what i could do? thank you for your help
My ip keeps failing. When I'm looking at the Ethernet icon on control panel it says unidentified Ethernet. Also When I'm testing the connection on ps4, there are more stuff on the screen other than obtain ip address and internet connection. Why is that ?
you don't have to notice everything you see in the test internet connection. all you need is it succeeds on the tests. If not then try to bridge the connection of your wifi to your ethernet, or make sure you have already installed the npcap
@@Kamlon_Corner I've done all of them and none of them worked. I'm stuck in the connection part. That's the most important issue for me. I don't know what I'm missing. it's like my PC and my PS4 don't recognize each other.
Nope. It might be because of the PPWN loader you used. I used The Go on my attempt but didn't work, so I switched to the GUI one and it worked. It could also be because you have the bridge your Wifi and Ethernet on your Computet/Laptop
I have a problem because I can't run over the defeating kasler phase. Always come with a kernel panic and then the ps4 shuts down. If you know what is the problem please tell me. Thanks for the video
Hi mate. I always receiving a message that payload not found. I've named the .bin goldhen/stage2/stage2_11.00 but there is no luck. The file in root of my flash drive. Could you advise?
My version was 10.57, then I upgraded it to 11.0 as in the video. I downloaded the files given in the link. I connected my laptop and ps4 with cat 6. I open the program but after getting an ip it does not switch to stage 2 please help
@@Kamlon_Corner PPPwnGo_v1.9.1beta is what is working for me so far i am still on firmware 9.00 will old method still work for me in which you have insert pen drive when prompted now that i have new jailbreak goldhen in my internal hard drive
I'm trying to do use genhen but always stop on waiting for PADI... I think is because ps4 doesn't get IP and don't know why.... I'm connecting to the LAN of one laptop
@Kamlon_Corner 11 and below ? 🤣🤣 it's only for 11.0 , the exploit works on lower versions since it was never patched or brought back ... but there is no jailbreak at the moment for versions 9.03 - 10.+, only 11.0 and 9.0 and lower
HI. I need some help... When I try to connect in the easy mode, my ps4 connect to the internet greatly. But, when I put PPPoE process, it stucks and cannot obtain IP address. How can I fix that?
@@Kamlon_Corner I am using an adapter. Stucked in here. [+] STAGE 0: Initialization [*] Waiting for PADI... [*] Waiting for PADI... [+] pppoe_softc: 0xffffc4b206ac0c00 [+] Target MAC: c8:63:f1:2f:5c:0e [+] Source MAC: 07:0c:ac:06:b2:c4 [+] AC cookie length: 4e0 [*] Sending PADO... [*] Waiting for PADR...
yup, you can still run it on any firmware below 11.0, just pick the version on the application. It's the goldhen that onbly works on 9.00 and 11.0. but eventually it will be ported on other firmwares
Hi mate , just wondering if you could give some thoughts on this When trying to set up the Ethernet connection between console and PC I can never obtain ip address, when I check properties of the Ethernet cable it says no internet connection I don’t understand why this happens, I’ve tried network bridge but still no good, would be good to hear your thoughts on this one
try connecting the ps4 to your router first if it can detect ng internet, if it can means the issue is on the pc, if not then try using a different ethernet cable. If still won't connect then your ethernet port is faulty.
@@Kamlon_Corner so.. I finally got it working turns out my connection was dropping in and out during the process so I had to fiddle with the configuration of network adapter so it was stable enough to establish IP within time limit 🙏🏼 thank you for all your work brother
@@devpatel3014 TBH i don't know what type of cable I'm using, been using that for almost 10 yrs! But I also think the network structure has something to do with the stability. For sure in the next few days we'll have some solid info regarding that, in the meantime I'll keep watch for any updates.
Bro i tried the jailbreak on my laptop and i succeed on gtting it on fw 11.00 the only thing is every time i try to run the ppwwn it shows that it doesn't work and instead of ethernet showing there it shows local connection but other thing is that my laptop doesn't support the latest version of ncap do you have any tips it would help alot ❤️
hay i am trying to jailbreak my ps4 slim in the fw 11.00 but while doing it i am following a video from yt and doing as shown in the video but still my in my while the jw come to 2nd stage STAGE 2: KASLR defeat then my ps shuts down and does not start again i need to start mannually is it okh or is there anything to do plz help me i am stuck in the last step its sad i want to play games
@@Kamlon_Corner first of all thank you for replying me and its has happend to me for over 15 times now should i be trying again and again or is there any way to fix it i can show u the screenshots and i have tried the method shown by modded warfare too but in that loader it shows some sort of error i have the sc of that to maybe u can see them and tell me what do i do
i successfully jb my device yesterday & even played some games but today i keep getting ip address fail, although i tried everything modded warfare said 😢
had no luck with modded warfare method, it keeps saying " pppwn.py: error: unrecognized arguments: L A K R O W\AppData\Roaming\pppwn_mw\exploit\stage1\stage1_1100.bin " same goes for pppwgo i have no CMD black windows , the main app screen keep waiting for Padi .... any help please ?
@@Kamlon_Corner thanks for your reply, i figured it out i'm just the dumbest creature on earth i kept the rj45 end connected to the router instead of the pc so the operation couldn't get triggered XD yeah you can laugh. as for the error i mentioned in my comment it was due to windows defender detecting the pppwnGUI/GO as virus and prevent it from executing the task properly.
You are the man it finally worked!!!!
Bro you are the best ps teacher. Glad i found you channel.
thanks bro.. I appreciate that!
just updateed my 9.6 to 11, and now its work like a charm
glad to hear bro. make sure you optimize rest mode so you won't have to go through all the trouble on your next game.
Wow, I tried this, and it works perfectly! Thanks a ton! 💯
much welcome bro! happy gaming
My numerous tests so far. PS 11.00 Slim. Modded W on a computer, normally takes
After second try my ps4 crash and doesn't open anymore
Words can't not describe on how much I'm grateful for you thanks to you how I was able jailbreak my PS4 thanks to you because I was about to give up because the frist app wasn't working for me until I used the second app so thank you so much
really glad to help bro!.. enjoy your ps4.. we have other videos on how to install games you may want to check them as well :)
Im trying to use pppwn and why it stucks at loading and not proceeding on stage 0?
use the latest version bro
Link PPPwn GUI not work 😢
I don't understand if I should put the "Ps4" folder on a USB stick and then insert it
When i press go it pop up a error (0xc000007b) even am installing all missing dll,direct x and microsoft c++
My ps4 11.00 jail break is not jail breaking
check our latest video for 11.0 jailbreak
For me my ps4 is just crashing PPPwn works fine but after downloading it just crashes my ps4
Everytime i try to jailbreak it says cant connect to internet connection
check your lan cable, it must be directly connected to the pc
@@Kamlon_Corner its in properly but then it stops at LCP Configure requesy
After pinning cpu
After pinning cpu
The program writes about a successful download, but the inscription Pppwn and GoldHena does not appear on the console itself. Doing everything according to the instructions does not work
either ps4 does not recognized the hdd or file name is incorrect.
My problem is I get ppwned pop up but goldenhen never loads
I'll be making a video today on how to fix errors on PPPwn including that issue
Link PPPwn GUI error
6:42 when i do test internet connection it doesn’t look like this everything pops up normally i haven’t been able to run the jailbreak
I also mentioned the fix on that.
Try ppwngo, also go into your router on your pc and select “share this pcs internet” or something like that
I keep getting pppwned and not goldHen loaded do I just keep trying
there's issue with your usb, check this
ruclips.net/video/yc1Gxl3Bw60/видео.html
I did everything correct but when I test the internet it show me stuff more than obtain the internet
as long as you can verify the ip address, you can disregard the other stuff
I am constantly getting "Connect a LAN cable and try again" popup on my ps4. How can I fix that?
I mentioned that on the vid bro.
Updated to windows 24H2 and it no longer works just streams that there is an error with the sending device. Any suggestions?
excuse me im trying to extract the pppwn gui 1.5 and it keeps not letting me i tried downloading 7 zip and that did not work can anyone help
turn off your firewall temporarily.
What about if the Ip adress giving errors and ppwn loading it not progressing what to do😢?
tha's the very first part we address, make sure your ps4 ethernet port is working
@@Kamlon_Corner I have 2 PS4s and both doing the same
Connect and disconnect the cable multiple times, untill it works, i had this problem at my first try and it was just the connection of the cable. Now its working fine. Also, do this on the pc port.
@@AnderrsonM Thnks man I Will try
@@gracemawete2116 did it worked?
Pppwn gui doesn't run and says access denied
turn off your firewall temporarily.
Pppwn says “code execution cannot proceed because packet.dll was not found” when I click run exploit…. What do I have to do?
what os are you using?
Block in "heap grooming %0 " any help ???
disable your firewall temporary bro
@@Kamlon_Corner i try to disable it but nothing changed i'm using adapter because my laptop doesn't have ethernet port direct
When downloading the pppwn it says virus detected?
just allow it, it's completely safe
Please help my ps4 show can not obtain ip adress within the time limit message
follow the vid bro, it was explained what to do on that issue
i got a ps4 slim on 11.0 and i've tried pppwn 1.5/1.7 and npcap 1.6/1.79 and two different usb sticks in fat32/exfat and i either get a "PacketSendPacket failed" error loop on 1.7 or i get to stage 4 with 1.5 but goldhen notification never pops up and i don't get a debug menu. is my ps4 slim just not jail breakable?
i have the exact same issue on my ps4 rn. im on pppwn 1.9 with npcap 1.79 and i keep getting this error on stage 0 : PacketSendPacket failed: A device attached to the system is not functioning. (31). if you figure anything out please respond :)
@@davidm8186 i just tried pppwn 1.9 with npcap 1.79 and GoldHEN_v2.4b17.3 and still luck. tried a different Ethernet cable and both usb ports (i know both ports work) and still nada. even if pppwn does succeed there is no jb happening. my model is also down as working on 11.0 on the spreadsheet available... really the only other thing i can do is to try a different pc/laptop. i'll try and update but i'm not too hopeful...is your model a slim? also have you tried the "lite" version? i haven't yet...
if the xploit is loaded but not the goldhen, then the issue is with the hdd. follow this bro
ruclips.net/video/yc1Gxl3Bw60/видео.html
@@Kamlon_Corner do you know if the issue i stated before with error 31 is also related to the hdd. i tried following your tutorial with pppwn go but i still get the same error. i also used 2 different ethernet cables and still no luck. if not do you know what i could do? thank you for your help
@@Macho_Man_Randy_Savage i have the normal ps4. stil trying to get past stage 0 but havent been able to
Mine shuts down when The payload succeeds
use the latest version of the apps
@Kamlon_Corner I am doing that but it stills shuts down
10:32 anytime the system crashed and the paylod is not working , time after time i do this ..
step by step like you do ?? What is the problem
use the updated version of the tools. if you're using lite, use 3.9
PPPwn PS4 loader - Unhandled exception has occurred in your application error
how to fix this?
You need to block the antivirus you have on your computer from all internet traffic because it is blocking your program!!!
hello friends I have error 31, where can this come from?
hello sir i keep getting ( few words in japanese and then network and more japanese words ) when i try to exploit i can't understand the problem
use the latest tools
My ip keeps failing. When I'm looking at the Ethernet icon on control panel it says unidentified Ethernet. Also When I'm testing the connection on ps4, there are more stuff on the screen other than obtain ip address and internet connection. Why is that ?
you don't have to notice everything you see in the test internet connection. all you need is it succeeds on the tests. If not then try to bridge the connection of your wifi to your ethernet, or make sure you have already installed the npcap
@@Kamlon_Corner I've done all of them and none of them worked. I'm stuck in the connection part. That's the most important issue for me. I don't know what I'm missing. it's like my PC and my PS4 don't recognize each other.
@@AntiCosmic840 try conencting your ps4 to the router first if it can detect the router. If not then change your lan cable
When I try to install a ps4 jailbreak, I succeed in installing pppw and then the Payload not found sign appears!
Thank you
check your external hdd bro
@@Kamlon_Corner
I will try changing it and let you know the result. Thank you very much
@@Kamlon_Corner
I changed it, but still same problem( Payload not found! ) thank you very much
How do i connect my ps4 into my laptop?
you can use usb to ethernet port adapter
Hb Store dont open cdn error what to do ?
connect your ps4 to your wifi, make sure you have an active internet connection.
The pppwnd link isnt working. Is it bcz im in Australia?
Nope. It might be because of the PPWN loader you used. I used The Go on my attempt but didn't work, so I switched to the GUI one and it worked. It could also be because you have the bridge your Wifi and Ethernet on your Computet/Laptop
@@ImActuallyHaru i can't download the actual pppwnd from the mediafire link
@@h__adamm___ change your windows security settings
It’s really possible to downgrade a ps4?
I have a problem because I can't run over the defeating kasler phase. Always come with a kernel panic and then the ps4 shuts down. If you know what is the problem please tell me. Thanks for the video
check this
ruclips.net/video/v5u2L8uA2Mg/видео.html
What is the solution for a waiting padr?
use the latest version of the app, or try this
ruclips.net/video/3_Oqe2AglJA/видео.html
Hi mate. I always receiving a message that payload not found. I've named the .bin goldhen/stage2/stage2_11.00 but there is no luck. The file in root of my flash drive. Could you advise?
check this bro
ruclips.net/video/yc1Gxl3Bw60/видео.html
My version was 10.57, then I upgraded it to 11.0 as in the video. I downloaded the files given in the link. I connected my laptop and ps4 with cat 6. I open the program but after getting an ip it does not switch to stage 2 please help
try this version of the lite bro
ruclips.net/video/N0-yyAtXses/видео.html
@@Kamlon_CornerUnfortunately, it doesn't work ☹️I've tried every way, but I'm doing something wrong, I guess ps4 resets itself, please help
Hi, could you make a video on how to activate the jailbrake on Linux? I would like to test, to see if its better.
It’s essentially the same! If not more stable and reliable, the original program was made on Linux then ported to windows
What to do when I get PPPwned notification but payloads dont get injected?
check the payload on the hdd, make sure the filename is correct. then check the hdd if it's detected by the ps4
I get payload not found on my ps4 help pls?
check the hdd and the filename of the payload. if everything is correct and stioll no payloads, change the version of the tools you are using
@@Kamlon_Corner what u mean check the hdd? and what should the filename of the payload be?
@@Not_Iv4o format must be exfat, file name should be the same goldhen.bin
Can anyone confirm if you have successfully jailbroken a PS4 PRO with this exploit?
I'm using a ps4 pro on this
hanging one stage 2 defeat kaslar help
that's close, just keep trying. don't forget to restart the ps4 if you get 3-5 fails straight.
Same
@@devpatel3014 hey it just worked for me.. keep trying
@@Kamlon_Corner PPPwnGo_v1.9.1beta is what is working for me so far i am still on firmware 9.00 will old method still work for me in which you have insert pen drive when prompted now that i have new jailbreak goldhen in my internal hard drive
Same
I'm trying to do use genhen but always stop on waiting for PADI... I think is because ps4 doesn't get IP and don't know why.... I'm connecting to the LAN of one laptop
check this
ruclips.net/video/v5u2L8uA2Mg/видео.html
11.52 jailbreak video plzzz
My laptop didn't show Ethernet on config, only Ethernet 23 is available, how to fix it😢 please help me
have you tried running the xploit without bridging the wifi?
Stop false advertising,, there is no jailbreak for 9.03, 9.0+10.0+ ….. it’s only for version 11.0
there is no misinformation here, just mis understanding. as long as you can update then its possible. next time watch the video before you comment.
@Kamlon_Corner misdirection....... read your own post, then say something 🤣🤣🤣🤣
@Kamlon_Corner 11 and below ? 🤣🤣 it's only for 11.0 , the exploit works on lower versions since it was never patched or brought back ... but there is no jailbreak at the moment for versions 9.03 - 10.+, only 11.0 and 9.0 and lower
[-] Error: Leak is invalid. Wrong firmware?
Yes, update to 11.0 for better results, if you’re higher than 11.0 you’re outa luck sorry man
Welp to late i update to 11.0 i can't wait anymore i want to jailbreak my PS4
HI. I need some help... When I try to connect in the easy mode, my ps4 connect to the internet greatly. But, when I put PPPoE process, it stucks and cannot obtain IP address. How can I fix that?
choose the correct ethernet port if your using more than one.
@@Kamlon_Corner I am using an adapter.
Stucked in here.
[+] STAGE 0: Initialization
[*] Waiting for PADI...
[*] Waiting for PADI...
[+] pppoe_softc: 0xffffc4b206ac0c00
[+] Target MAC: c8:63:f1:2f:5c:0e
[+] Source MAC: 07:0c:ac:06:b2:c4
[+] AC cookie length: 4e0
[*] Sending PADO...
[*] Waiting for PADR...
Did you fixed?
hi i cant find the python 3.12.3 (64- bit) setup file
thanks
mine shutdowns☹
use the latest version bro
Bro can I run exploit first on my 10.01 version just to make sure pppwn working or not ? And then if works I will update on 11 is it ok?
yup, you can still run it on any firmware below 11.0, just pick the version on the application. It's the goldhen that onbly works on 9.00 and 11.0. but eventually it will be ported on other firmwares
@@Kamlon_Corner should I wait on 10.01 as sistro posted for 10 and 10.01 soon
@@DhanDisha if you can wait, then you're just simply saving yourself from some headaches.. we may even get some updates in the next few days.
@@DhanDisha onde ele colocou?
Hi mate , just wondering if you could give some thoughts on this
When trying to set up the Ethernet connection between console and PC I can never obtain ip address, when I check properties of the Ethernet cable it says no internet connection I don’t understand why this happens, I’ve tried network bridge but still no good, would be good to hear your thoughts on this one
try connecting the ps4 to your router first if it can detect ng internet, if it can means the issue is on the pc, if not then try using a different ethernet cable. If still won't connect then your ethernet port is faulty.
@@Kamlon_Corner thank you, I will try all this and let you know, appreciate you brother much respect to you
@@Kamlon_Corner so.. I finally got it working turns out my connection was dropping in and out during the process so I had to fiddle with the configuration of network adapter so it was stable enough to establish IP within time limit 🙏🏼 thank you for all your work brother
@@cchelios1138 nice! glad to hear bro!.. enjoy gaming..
bro why my games still showing locks im on 11:00 version
goldhen was not loaded. check this
ruclips.net/video/yc1Gxl3Bw60/видео.html
Pppwn wont open
check your cuh model
I've jailbroken my ps4 before, but now pppwn won't open. Will it only open if it's connected to the ps4?
What type of Eth cable do u use?
Does using a CAT6 cable vs . CAT5E cable make any difference?
I believe no. I'm using the same cable on pc and laptop but for some reason I have a much better results on laptop.
@@Kamlon_Corner someone on Twitter suggested that using 5E cable will not jb your console use only 6 one. That's why I wanted to confirm.
@@devpatel3014 TBH i don't know what type of cable I'm using, been using that for almost 10 yrs! But I also think the network structure has something to do with the stability. For sure in the next few days we'll have some solid info regarding that, in the meantime I'll keep watch for any updates.
@@devpatel3014I’m using 5E, less reliable but it does work !
Please is 10.50 version PS4 slim jailbreakable?
yup, you can follow our guide on the description
boss may c++ n sna mgkaroon k ng tutorial using windows...slamat
most i jailbreak my ps 4 anytime i put it on
after shutting down, yes. just keep it on rest mode when you want to turn it off
For you guys you have obtaining ip address and internet but mine have playstation network and everything do you think there is problem
No, it is like that because you have previously connected to PSN. That isn't the problem
Bro i tried the jailbreak on my laptop and i succeed on gtting it on fw 11.00 the only thing is every time i try to run the ppwwn it shows that it doesn't work and instead of ethernet showing there it shows local connection but other thing is that my laptop doesn't support the latest version of ncap do you have any tips it would help alot ❤️
try installing an older version of npcap
@@Kamlon_Corner thanks bro i will try also thanks for the hard work keep it up ❤️
pano sir pag wifi connection]
Ip echec plz help me
hay i am trying to jailbreak my ps4 slim in the fw 11.00 but while doing it i am following a video from yt and doing as shown in the video but still my in my while the jw come to 2nd stage STAGE 2: KASLR defeat then my ps shuts down and does not start again i need to start mannually is it okh or is there anything to do plz help me i am stuck in the last step its sad i want to play games
that's kernel panic, that's normal to jailbreak. on the vid it also happened to me and I mentioned you;ll just have to retry again
@@Kamlon_Corner first of all thank you for replying me and its has happend to me for over 15 times now should i be trying again and again or is there any way to fix it i can show u the screenshots and i have tried the method shown by modded warfare too but in that loader it shows some sort of error i have the sc of that to maybe u can see them and tell me what do i do
@@ULTRAedge-sy2pc as long as the methd proceeds with the scanning then all you have to do is retry.
Can you do it on 11.50?
No
No, it will probably be another half a decade before anything above 11.0 gets a jailbreak
i successfully jb my device yesterday & even played some games
but today i keep getting ip address fail, although i tried everything modded warfare said 😢
Its just your ethernet cable, probably.
Try to connect and disconnect, on the rj45 ps4 port and pc port.
I'm the first one to see
had no luck with modded warfare method, it keeps saying " pppwn.py: error: unrecognized arguments: L A K R O W\AppData\Roaming\pppwn_mw\exploit\stage1\stage1_1100.bin " same goes for pppwgo i have no CMD black windows , the main app screen keep waiting for Padi .... any help please ?
have you tried the lite version? what is the model of your PS4?
@@Kamlon_Corner thanks for your reply, i figured it out i'm just the dumbest creature on earth i kept the rj45 end connected to the router instead of the pc so the operation couldn't get triggered XD yeah you can laugh. as for the error i mentioned in my comment it was due to windows defender detecting the pppwnGUI/GO as virus and prevent it from executing the task properly.