Mediafire is saying it blocked the "Dangerous download". I know its not dangerous, error is probly on my end, but figured id give the heads up before people irrationally freak out lol
I am still running 7.55. I cloned my original PS4 1tb HDD to 1tb SSD plugged SSD into PS4 and worked like a charm Now I am going to mod custom firmware version 9 If anything goes wrong I can always clone my original PS4 HDD Again I am new to PS4 modding. Big fan of this channel. Hey Mike can you please make an all in one video on how to mod a PS4. (Start to finish including how to install games the difference between fake and real packages and how to tell if a package game is real or fake) also how to tell if packed will play on firmware version you have installed That would be awesome Thanks again for keeping the PS4 relevant.. ???
"If anything goes wrong I can always clone my original PS4 HDD Again" No you can't a IC on the Mainboard saves the firmware version, that's why downgrading is not possible
@@DonMarv00I have done it. My PlayStation screwed up while I was doing and custom firmware job. Mind you I didn't know what I was doing I got to the end and was running 7.50 or 7.55 I think. Then my CFW SSD screwed up somehow froze. I formatted using a computer cloned the original PS4 HDD. And shoved it back in work like a charm. But the original firmware and the custom firmware were the same. Maybe that's the difference If I would have upgraded to CFW 9 then it might not have worked Because they are different firmwares. Not discrediting you and what you say you know 10 times more than what I know. That's just what happened with me. Thanks for the response
@@megabaneen8057 You need to have the same firmware. So update your old disk to 9.00 along updating your PS4 to 9.00. Otherwise that old disk won't be usable anymore (if you updated your console with new disk leaving the old one with unmatching firmware version).
Thank you i will definitely subscribe to your channel just did this on my ps4 tho for some reason the stage 2 payload was not in the hen when I was using my computer but on my phone it was showing up but it worked in the end can you make a video on what to download on hen
@@sudiyonome4194 yeah when you jailbreak your PS4 I put goldhen on the PS4 and turn it off goldhen won't be there you have to jailbreak it again so if you leave it on reset mode goldhen will always be on
There are games like The Crew Motorfest that need system 10.5. I have a PS4 with 9.00 and I couldn't install the purchased disk. Is there a way to install The Crew Motorfest on system 9.00?
Hey so I've been trying this for 4 hours now and it has yet to load 12 crashes And 10 failed attempts I have yet to successfully load gold hen is this normal?? I'm on fw 11.00
when you've failed have you noticed that your ps4 sounds cuts off, after that it fails your try 2-3 more times the ps4 just shut downs, did this happen to you as well ?
@@st3wbakah836 so what you're saying i havent tried enough to jailbreak or maybe i just wait till something more stable comes out and then i try it, thanks for the answer broski
@Funlife-facts honestly I have no clue but I'm still at it trying to get this to work, so far its failed 4 additional times and crashed an additional 2 times but I'm not giving up 😅 and yeah no problem :) I'll try to update if I ever get it working lol
Hello Michael There must be a way to run this script automatically if you use Unraid at home. There is the plugin Auto Script Execution. What do you think? Is or will that be possible? Thanks for your answer
Got it on the 3rd try with python and ncap installed. Ps4 slim 11.00. Extensively testing it and sleep mode and installing different games and playing it.
I am stuck on the ppPwn PS4 Loader just loading the stage 2 and I can’t obtain an ip address even tho I have the goldhen bin file on my usb in my ps4 and I’m hooked up to Ethernet I don’t know how to fix it, any help??
This aint working for me for some reasons, either im missing something or just my ps4 cant handle it, i do everything(i think so) ps4 just refuses to be jailbroken either it fails 100 times or after 2-3 attempts without restarting the ps4 just completly shut downs, i think that i gave up and wont even try anymore im done
@@igorferreira2973 finally literally as I am writing this it worked , I kept the stage2.bin the same name so stage2_11.00.bin and re downloaded goLd HEN , and it worked after a lot of attempts
Hey I was in the process of jailbreaking my ps4 11.0 I was watching your video but everytime I connect the lan cable the connection says failed. And then when I run the command it failed as well. Was wondering if you could help me I could pay you cash app if needed
It wont give me an ip address, it just wont. Ive tried everything. really need help. bridged connections, shared network. all of it. Ive changed the ethernet cable. restarted a billion times. it just will not give an ip address
Nothing happening after hitting button run exploit, says loading and that's it. Testing on 9.00. Installed all the prerequisites and doing all the steps like you described. Just to see how fast will jailbreak, but something is not right and is not working at all.
im struggling to install it im11.00 and everytime i put the goldhen.bin on the usb and run the stage 2 i just get ppwned and goldhen is not patching. :(
I don't understand why to connect pc and ps4 with an internet cable? So how is the computer connected to the Internet, does it even have to be? Except if it's not wifi.
my ps4 slim is on 11.0 but even if pppwn is able to send a payload and complete it successfully i get no goldhen message or debug menu...what could be the cause?
hello, i have a ps4 500gb firmware 10.50. i would like to start over with new 1tb hdd. If i understand well i must swap the 1tb hdd from the beginning and then apply the PS4 Update (11.00) and continue the process for jailbreak. Is this order correct ???
Wouldn't going to from 9.00 to 11.00 technically allow you to play most of the recent games without requiring backport fixes? You will again be able to backup your disks. So is not entirely useless to update i guess. I will still wait for some homebrew apps to have official support for 11 though.
yeah, it would allow you to physically dump those games and run them much easier. But again, most of the new games are already dumped and also have the patches ready.
This is something you shouldn’t even consider seeing just how much time is put into this jailbreak. Stay on 9.00, there is no game you can play on 11.00 that wouldn’t work on 9.00
Thanks for the video, i try this on my ps4 firmware 10.5 but it is getting off when the payload is sending in the final stage, the loader said sending payload done but every time i try ps4 getting off, why is that?
Hi. I am following the same steps as you mentioned but i am getting a "failed" action while in scanning for corrupted object while running the pppwn i am using version 11 as you mentioned and even tried running the same exploit multiple time is there anything i have do?
1:32: 9.03 - 10.71 Already recommending this to upgrade to 11.00? Did the devs recommend too? I'm on 9.03 still waiting but wasn't sure the recommendation from the devs.
The program writes about a successful download, but the inscription Pppwn and GoldHena does not appear on the console itself. Doing everything according to the instructions does not work
Daily PlayStation Homebrew News - twitter.com/crump_youtube
How about 9.03
is coding required for the ps4 jailbreaks to work?
I need your help Sir. Mine just upated to 11.50. Am almost going mad right now
Mediafire is saying it blocked the "Dangerous download". I know its not dangerous, error is probly on my end, but figured id give the heads up before people irrationally freak out lol
I am still running 7.55.
I cloned my original PS4 1tb HDD to 1tb SSD plugged SSD into PS4 and worked like a charm
Now I am going to mod custom firmware version 9
If anything goes wrong I can always clone my original PS4 HDD
Again
I am new to PS4 modding.
Big fan of this channel.
Hey Mike can you please make an all in one video on how to mod a PS4. (Start to finish including how to install games the difference between fake and real packages and how to tell if a package game is real or fake) also how to tell if packed will play on firmware version you have installed
That would be awesome
Thanks again for keeping the PS4 relevant..
???
"If anything goes wrong I can always clone my original PS4 HDD
Again" No you can't a IC on the Mainboard saves the firmware version, that's why downgrading is not possible
There will be lots of new videos coming! Hopefully you find them useful.
@@DonMarv00I have done it.
My PlayStation screwed up while I was doing and custom firmware job. Mind you I didn't know what I was doing I got to the end and was running 7.50 or 7.55 I think. Then my CFW SSD screwed up somehow froze. I formatted using a computer cloned the original PS4 HDD. And shoved it back in work like a charm.
But the original firmware and the custom firmware were the same.
Maybe that's the difference If I would have upgraded to CFW 9 then it might not have worked
Because they are different firmwares.
Not discrediting you and what you say you know 10 times more than what I know. That's just what happened with me.
Thanks for the response
It’s not possible to upgrade or revert firmwares with just a HDD
@@megabaneen8057 You need to have the same firmware. So update your old disk to 9.00 along updating your PS4 to 9.00. Otherwise that old disk won't be usable anymore (if you updated your console with new disk leaving the old one with unmatching firmware version).
Very easy to learning bro, thank you
Thanks for watching!
@@mbcrumpfor me payloads work but when i use goldhen it alwaxs fials
thank you .. your videos explain alot better than the others
??
Npcap is required to run the exploit
Please install it and try again
Working perfectly on my PS4 Pro 11.00 many thanks
You need restart the all step if you restart your ps4 realy ? Plz answer me
If happed to you
Yes. If it restarts you need to do it again
@@حسينكاملجبارحبيب yes for now its like that but its soon on the hardware and its alltime on
But putting on rest mode will not remove the golden patch, it will be there.
Thanks for the demo and info, very helpful, have a great day
Will we have a No PC/Ethernet way to run the payload in the future? Seems like too much fuss to do all this everytime
did it first try! awesomeeeee
your lying it don't work unless you have a model that we all dont have
worked just fine! 👍🏼
Do we have to install goldhen everytime when we turn on ps4 ? For me i have to install everytime without the usb drive.
It literally says you have to run it everytime
thank you bro it worked i was on 10.50
Glad to know im on 10.50
HELLYEAH Thanks Sir.
Thank you i will definitely subscribe to your channel just did this on my ps4 tho for some reason the stage 2 payload was not in the hen when I was using my computer but on my phone it was showing up but it worked in the end can you make a video on what to download on hen
Every time I try to set up a lan connection it shows failed
please tell me if you find a way to obtain ip address
Don't forget to leave your oa4 on rest mode cuz when you turn it off and turn it back on you have to re jailbreak aging
really bro? when ps4 on rest mode how to activated hen again? i'm really confuse cuz my ps4 not rest mode and not always playing ps4.
@@sudiyonome4194 yeah when you jailbreak your PS4 I put goldhen on the PS4 and turn it off goldhen won't be there you have to jailbreak it again so if you leave it on reset mode goldhen will always be on
@@sudiyonome4194 and I'm on 11.00
GoldHen for PS4 11.0 automatically ticks this setting. (Can be found in GoldHen - Settings - Enable Rest Mode)
@@mbcrump yeah that's what I had to do and some others
it's nice, but doing this exploit each time you restart your ps4 is very annoying, 9.0 was easy usb and just run exploit through ps4 web browser
There are games like The Crew Motorfest that need system 10.5. I have a PS4 with 9.00 and I couldn't install the purchased disk. Is there a way to install The Crew Motorfest on system 9.00?
The GUI just says waiting for PADI...
Thanks 🎉
Obtain IP address - failed????? Please help 🙏🏻🙏🏻
Hey so I've been trying this for 4 hours now and it has yet to load
12 crashes
And 10 failed attempts I have yet to successfully load gold hen is this normal??
I'm on fw 11.00
when you've failed have you noticed that your ps4 sounds cuts off, after that it fails your try 2-3 more times the ps4 just shut downs, did this happen to you as well ?
@Funlife-facts yeah it completely crashed the 12 times the "failed attempts" were where it says "scanning for corrupt object...failed. please retry"
@@st3wbakah836 so what you're saying i havent tried enough to jailbreak or maybe i just wait till something more stable comes out and then i try it, thanks for the answer broski
@@st3wbakah836 Yea I have the same problem. Looked everywhere for a solution and nobody seems to have one
@Funlife-facts honestly I have no clue but I'm still at it trying to get this to work, so far its failed 4 additional times and crashed an additional 2 times but I'm not giving up 😅 and yeah no problem :) I'll try to update if I ever get it working lol
Hello Michael
There must be a way to run this script automatically if you use Unraid at home. There is the plugin Auto Script Execution. What do you think? Is or will that be possible?
Thanks for your answer
Got it on the 3rd try with python and ncap installed. Ps4 slim 11.00. Extensively testing it and sleep mode and installing different games and playing it.
Share site of games please
How do you install games
hey there..when will the jailbreak for 11.5 will come out?
Same
First!❤thank you
Thanks for watching
I am stuck on the ppPwn PS4 Loader just loading the stage 2 and I can’t obtain an ip address even tho I have the goldhen bin file on my usb in my ps4 and I’m hooked up to Ethernet I don’t know how to fix it, any help??
Please let me know if you find the solution
@@najeebalkhayyat6618 I downloaded python and it worked great
I got it working now
@@Ronnie12_D23how
@@Ronnie12_D23 what did u do
When testing the internet, you only have “Obtain Ip Address” and “Internet Connection”. I have a full page
This aint working for me for some reasons, either im missing something or just my ps4 cant handle it, i do everything(i think so) ps4 just refuses to be jailbroken either it fails 100 times or after 2-3 attempts without restarting the ps4 just completly shut downs, i think that i gave up and wont even try anymore im done
Mine is the same, so annoying
It's crashing keep trying it it will eventually work
You've got to keep trying it.
Try a different lan cable
stage2 payload isn't injecting on ps4 but on the GUI app sending stage2 payload is already done.
Keep trying. You'll eventually see the pop-up that I showed in the video.
200 tries no joy only worked 7 times where the stage 2 payload injects , all 7 times my ps4 freezes or crashes or both
with me is 200 tries and 0 sucess
@@igorferreira2973 oof, it’s the freeze and crash that concerns me it makes a buzzing sound
@@NaqshbandiNaqeebi with me is just kernel panic. image crashs and ps4 turns off and to turn it back on just unplug it and plug it back in.
@@igorferreira2973 finally literally as I am writing this it worked , I kept the stage2.bin the same name so stage2_11.00.bin and re downloaded goLd HEN , and it worked after a lot of attempts
I got the same problem bro but I'm gonna keep trying
Still never explained why we downloaded python and npcap? Will it not run without them being downloaded?
Do you have to do that each time ps4 goes of or just once
PPPoE user ID or password is not correct error
am using a ethernet adapter and it''s not working for me
do you know some pkg sender ? For 11.00? Ftp takes a lot of time and I remember that remote pkg sender was fast
I have gotten the pppwned notification twice but goldhen does not install
same issue :/
there lying it dont work
What about 11.50? Can we jailbreak??
Nope
I never get to stage 2 and it says failed
PPPWN link doesnt work
THE LINK FOR MEDIA FIRE IS NOT WORKING AT THE MOMENT
Hey I was in the process of jailbreaking my ps4 11.0 I was watching your video but everytime I connect the lan cable the connection says failed. And then when I run the command it failed as well.
Was wondering if you could help me
I could pay you cash app if needed
Is there a dumper tool out yet for 11.0?
You can use Itemzflow to dump games right now!
this shows how dumb we all have become that millions of people got rucked but you all will get sucked in on the ps5 lol
It wont give me an ip address, it just wont. Ive tried everything. really need help. bridged connections, shared network. all of it. Ive changed the ethernet cable. restarted a billion times. it just will not give an ip address
i have the same problem, can you find a solution?
When i try updating from 10.00 software to 11.00 it says the file is corrupted. I’ve reinstalled many times still dosent work any ideas?
Nothing happening after hitting button run exploit, says loading and that's it. Testing on 9.00. Installed all the prerequisites and doing all the steps like you described. Just to see how fast will jailbreak, but something is not right and is not working at all.
Mines stuck on loading you find out ?
I don't know to download pppwn
Whenever i turn on my ps4 after turned it off before, i have to do it again to jailbreak?
Yup, though there's newer methods you can look up now that can do it automatically with a small little external device that's like $15
do our computer need to be connected to the internet? My PC would lose internet connection if I switch my Ethernet port from router to PS4
If i unplug my pc will goldhen have to be reran?
im struggling to install it im11.00 and everytime i put the goldhen.bin on the usb and run the stage 2 i just get ppwned
and goldhen is not patching. :(
Doesn’t work for me. Keeps failing at stage 4
I don't understand why to connect pc and ps4 with an internet cable? So how is the computer connected to the Internet, does it even have to be? Except if it's not wifi.
my ps4 slim is on 11.0 but even if pppwn is able to send a payload and complete it successfully i get no goldhen message or debug menu...what could be the cause?
everytime I shutoff the Ps4 after the exploit it reverts back to stock settings each time, how do I prevent that?
Will u get banned for jailbreaking ur ps4
I cannot open the npcap website. I have everything else perfectly downloaded and ready to run, except for npcap
hello, i have a ps4 500gb firmware 10.50. i would like to start over with new 1tb hdd. If i understand well i must swap the 1tb hdd from the beginning and then apply the PS4 Update (11.00) and continue the process for jailbreak. Is this order correct ???
Ethernet not showing in PPPwn I’m using win7
same here it is showing local area network
@@sunilkarki4670 I changed to Linux and jailbreak my ps4
This jail break will work on 11.50 version as well?
How long you think that takes to get stable?
We need a couple more weeks.
Wouldn't going to from 9.00 to 11.00 technically allow you to play most of the recent games without requiring backport fixes? You will again be able to backup your disks. So is not entirely useless to update i guess. I will still wait for some homebrew apps to have official support for 11 though.
yeah, it would allow you to physically dump those games and run them much easier. But again, most of the new games are already dumped and also have the patches ready.
This is something you shouldn’t even consider seeing just how much time is put into this jailbreak. Stay on 9.00, there is no game you can play on 11.00 that wouldn’t work on 9.00
Do you need to keep the Ethernet cable in When done
No! Until you restart you PS4.
Tip- wait few more months
Thanks for the video, i try this on my ps4 firmware 10.5 but it is getting off when the payload is sending in the final stage, the loader said sending payload done but every time i try ps4 getting off, why is that?
Bro do we need to be connected to the wifi on our pc or what ? Because i haven’t used from LAN cable could you light up this
Ethernet only - connected directly to your PC
@@mbcrump Thanks a lot so you mean we don’t need internet connection this time
@@tamimhaqbar4622The jailbreak is copied to the console via the Ethernet Cable, you only need internet to download the payload to your usb
I need a way without a computer. Is there a way or not?
Looks like an Android rooted phone and a USB-C to Ethernet cable can do it
i keep getting scanning for corrupted objects failed please retry over and over any idea what’s the fix
No point then if you have restall it every time you switch on ps4 then if not permitted
could i get some help i get a error message with the pppwn loader when i click run exploit
Always have СЕ-33984-7 error running PPPwn. How to deal with this??
i have a question , when we restart our ps4 how load goldhen again
pppwn GUI 1.5 not available to download anymore! :(
All these jailbreaks but nothing progressing in the community
Hi. I am following the same steps as you mentioned but i am getting a "failed" action while in scanning for corrupted object while running the pppwn i am using version 11 as you mentioned and even tried running the same exploit multiple time is there anything i have do?
At the end i am getting an error "packersentpacket failed: A device attached to the system is not functioning"
do u need wifi over ethernet ?
whats the video that shows how to do it through command line
hi, what if i use the phone wi-fi??
Thanx
Bro can you help i have ps4 ver 11.50 and now i have games on my usb drive how can i install them please help
In the pc it gave me done but the goldhen doesn't activated in the ps4
I did everything you did, but mine didn’t work
it keeps failing at scanning for corrupted object
Gold hen was removed from ps4 after i turned it off and on do i need to do the process everytime
Sir do we need to jailbreak the console again after the restart ? If yes , when will it be fixed
I had to redo it after powering it off
listen if it turns off after loading you will be suck just loading the fill and not getting anywhere man this is a scam
I am on 9:00, can I try the new method ? Thank a lot anyway.
1:32: 9.03 - 10.71 Already recommending this to upgrade to 11.00? Did the devs recommend too? I'm on 9.03 still waiting but wasn't sure the recommendation from the devs.
The devs and testing team are focusing on 11.0 for now.
Upto 9.60 has psfree exploit so that may be beneficial in the future
i am on 9.60. which bin fill shall i use to run the exploit? 9 or 11?
For the lesser versions .aint out yet
if i try it on 11.02 will it crash?
It just won't run. no harm in trying.
Will it work on ps4 11.02,
Many thanks
i get an error when i open the python version
Please tell me it can work on 11.02😢😢😢
every step is okay. But no PPPwned and Goldhen on my screen.
Please help me😢
Every step by step is ok but no pppwn. Plz help.
Guys, Do not rename the file, put the file goldhen.bin directly into the USB stick without renaming and run the file stage2 on pppwn
@@HARIOMgupta650 do you get à solution ?
can I use the latest pppwn gui? Error upon clicking mediafire link.
The program writes about a successful download, but the inscription Pppwn and GoldHena does not appear on the console itself. Doing everything according to the instructions does not work
The same problem i have , so i just format the flash and put goldhin and it works
@@omarkhalid1980 I changed the flash drives and formatted them, nothing helps
Plase anyone help i cant optain ip adrres always failed at me when i connect ps with laptop
ppnw is done but gold hen is not loading
Sir you have bin file .but when I download it a video file
what about ps5? is there any information?