This ENGINE Cost MORE Than The CAR It's Going In *Saturn Sky Redline*
HTML-код
- Опубликовано: 3 окт 2024
- The brand new LDK engine for the 2007 Saturn Sky Redline is here. The LDK is the later model replacement for the original LNF engine and the head has to be swapped back to the old LNF style to fit in the Sky Redline. This is a turn key built engine with a new turbo as well and the bill was more than the price of the car. It also came with a new clutch, pressure plate, and tons of other new parts. Almost everything in the engine bay is going to be replaced by the time we're done with this thing.
MERCH: shopWatchJRGo.com
Shop Motul: motul.com
---------------------------------------------------------------
Common Questions:
What motorcycle do I ride? A few. Ducati 1198, Honda Goldwing, Honda Grom, Honda Ruckus
What do I do for a living? Make RUclips videos.
Can you wheelie? No, I suck.
Are you fast? Sort of. I suck mostly though.
Where can I keep up with you off the bike?
Instagram: WatchJRGo
Facebook: WatchJRGo (or JRGo, FB hates my branding)
Do you go to school? College, for 2 classes.
Why do you ride so dangerously? What do mean? I was doing 25.
Do you go to the track? Of course, hopefully there will be videos in the future.
Do you play video games? No, but I might stream N64 Goldeneye at some point. Twitch: WatchJRGo
Are you afraid the police will watch your videos and arrest you? Something something evidence something something warrants and due process of law
#SaturnSky #SaturnRedline #BigTurbo
Great seeing Gabe back and really cool to see the Sky get a brand new engine. Looking forward to this running again.
Gabe always brings the level of your videos up to 120% :D
Gabe needs a channel. Idc if he does basket weaving. He’s hilarious. I’d watch.
Great to see Gabe on the channel!👍
For sure 💯
Love to see three of my favorite Wichita boys together again. Will Gabe and Jake be over to your new house and shop a bunch ? It would be awesome to put the band back together again with the Fractured Rooster sitting in on drums.
AMA with all 4 of them
JohnRoss, Jake, Josh, and Jabe.
@@trapjohnson 😂🤣🍻
14:10 This is why I enjoy Gabe as a featured guest, he could not let that one slide.
Oh boy, new power plant is in, Gabe should be happy and one more car that can leave soon👍
I’ve always liked the looks of the sky, over the solstice. I like both but the skies are nicer looking, in my opinion.
Sky is much better for sure, the round rear of the Solstice just isn't right 😬
The Saturn brand should have been given a better go.
@@WatchJRGo you could convert it to Opel GT
I like the rear of the Sky, but like the front of the Solstice better.
@@PaulTC777 I would love to do that! Unfortunately, those parts are expensive and not easy to find. And shipping is also a bear.
@Gabe is finally getting his Saturn back, that's great news!
🍻😁👍🏼
That description fits most cars, if you have an older car and take it to have the A/C fixed, they'll quote you more than the cars worth.
Nicely done. Good to see the car back together. 👍Matt
If I could help Watch JR Goes and Gabes install the new engine in the Saturn Sky Redline I would drink the shot of whiskey and cold Bartle Skeets with them and puff on the Cannibus Cigars with them and get all schmoked up.
Stoked to see an update on this!
It had to be done before the big move! 😳
@@WatchJRGo looking forward to seeing what you've got in store. Congrats!
Just love when Gabe is on! He is a good man. Thank you for your service, Gabe!
🍻😉👍🏼
I just got a 2007 Saturn Sky Redline. 34K original miles. It's very fun and pretty fast. Drove it 130 MPH with the top down on the first day. Put a chip in it and discovered the "competition" mode. Took it to a car show and wound up talking till I was horse. Probably won't take it too a car show again.
Gabe is back.....YEAH!!!!!!!! GABE is the best sidekick mechanical person on the channel. Jake and Tyler are ok...but Gabe...he needs his own RUclips channel
🍻😉👍🏼
Never realized they canted the engine, for clearance? 🤘🏻🤘🏻🎉🎉🎉🎉🎉👍👍. Love to see it driving again guys.
isn't the GT's engine canted?
I always liked the looks of the sky, it's a shame they let it die. 😔
That is why I keep my 07
Late night update for the win!!!! Keep up the great work!!
No one commented about the jack....., gabe couldnt let it pass..Had me laughing -
at least you will have a tv in new shop
All that new stuff and you didn't resurface the flywheel... Those heat spots will be fine I'm sure.
OK so I finished a video and saw the thumbnail and literally LOL at Gabe! It worked guys I clicked.
Ha! Outstanding!!🍻😂👍🏼
I have the same car with 77.000 miles ,love it.
JR and Gabe Christmas morning 🕊
Fo rizzle!
Yay! It's Gabe! JR Jr.
i put the same engine (range extender) in a fisker karma after it had the notorious coolant leak (LNF). The one modification you may want to do now is change out the radiator. The radiator on these cars are sized like an ac condenser
Always a good day when Gabe is back on the channel
🍻😉👍🏼
There's an under $50 gizmo called an engine leveler that can be a big help when removing and replacing engines. I didn't notice any mention of flywheel resurfacing, which I often did when replacing clutches. Not an expensive service and cheap in relation to the time effort and outlay you're already into.
I agree that flywheel looked pretty used and abused. They probably just hit it with an abrasive to "resurface" it due to time constraints.
Most machine shops cannot resurface dual mass flywheels. You have to lock the flywheel together to resurface them it's not like an old school one piece flywheel that's easy to cut.
Wazaaa Gabe nice to see you having some fun with the new motor.
That Gabe Into. THE BEST!! ❤️ 💙 💜 💖 💗
here for the Sky content!
I just rebuilt mine ... Its cheeper to buy a forged crate engine. But still worth it .mine is in a manual hhr . ultimate sleeper
Glad to see Gabe's sky back on the road soon.
Gabe and his Opel GT... good to see you around Gabe
🍻😉👍🏼
Great to see Gabe
1:04 knife dudes bein’ knife bros
All right Gabe = bet you’re happy to get this engine done ✅
Big facts!!
Its subtle, But I believe this video is 33% Jake.
good one
🍻😂👍🏼
On the Corvettes we run a extension on the bleeder outlet because it actually has a bleeder to the outside of the transmission because if you don’t that slave cylinder can get packed with clutch dust oddly enough.
Gabe and JR, brothers in cars!
The problem with the exhaust manifold nuts and studs had been corrected. The studs now come with thread locker on them and the nuts are single use lock nuts.
Bought a wrecked 2015 Camaro SS 1LE w/30k miles for $12k, kept the engine/trans and parted out the rest for $8k ... so the engine/trans ended up costing a net $4k.
Required hardware, harness adaptations, computer programming, ect cost me around $8k.
I added about $5k in performance upgrades (Pistons, Rods, Rocker Shaft Kit, ect) which were not exactly required, but why the hell not ... right?
So my LS3/TR6060 swap cost me ~$17k doing it myself for a 2007 Sky with 200k miles ... So yeah, I feel you.
Duel mass clutches last about 60-70 thousand miles that’s definitely been changed at some point.
"When the motor came out, a baby was born. It's now starting college."
😂🤣😂🤣😂👍🏼👍🏼👍🏼🍻🍻
This should be the top comment!
Jack what!!! 🤣 Always great to see Gabe!!
My kid had a Saturn with well over 100K and the clutch had no problems. Back in the day at 100K the clutch would be gone. I assume better materials now.
The black convertibles are coming back to life just in time.
Can’t wait to see Gabe rip the Saturn sky!
Me either. It’s gonna be a very, very, very long and difficult break-in period. The temptation to push it is going to be a constant issue!!!! LOL!!! 😂👍🏼
Pratt and Whitney???? GABE! You know you should be running GE LM2500's!
I kinda favor the Lycoming T55s…
Race it against a turbo cavalier. That would be fun.
Just swapped out the LNF in the wife’s ‘08 RL. 60K and coolant in the oil. Swapped in a ‘07 with 12K. Did it in the driveway by myself. What an ordeal. Already put a couple hundred miles on it and it’s good to go
Nice job JR
I watch all your videos and I saw the video a few days ago about you moving and I just wanted to tell you my experience with T Mobile home internet and it is AWESOME I get lightning speeds like never before and has been a win win for me I hope you check them out there service is awesome
Gabe....good to see you man! I was disappointed in your knife JR. Awesome intro, I was wondering what happened! More please!
🍻😉👍🏼
01:08 “That’s not a knife. THAT’S a knife!”
we love Gabe!
Glad to see Gabe on the show again!
🍻😉👍🏼
pretty crazy flywheel, while holding a standard dual mass flywheel thats been fitted to nearly every manual car since late 1990s
Theres also that he spent almost 15k ( value of a solstice/sky) on a motor when a built gen 3 lnf shortblock from zzp good for over 500hp is 4k
I have a built lnf in my cobalt ss
@@WhiteG60 yup, Gabe bought the car for $6k
Thanks!
Fellow Sky RL owner here - so glad to see finally see this episode. Did the LDK come from ZZP or Performance Autowerks? Which turbo upgrade did you pick? Who’s doing tune? As long as you’re at it, you should upgrade to better charge pipes, 3 Bar MAP and larger intercooler. Not that much more $ and needed to let the LDK live up to its potential.
Everything came from RPM motorsports. The turbo is an upgraded K04 and it has the stage three tune already. Charge pipes were already upgraded as well.
@@Gabe-ABNCW3 sounds like you are on the right track. Martin/RPM MS seems to have a great reputation in the Kappa crowd. I’m I the process of putting in all the suspension pieces and roll bar to prep for track days and HPDEs.
I used to joke that the bump on the GT's hood was for the turbocharger...
@@jimbranham3281 sadly it’s not… got rid of the Solex and put a Weber 32/36 and hard piped it. WAAAAAAAAY better!
@@dwgunn oh sweet!
The dynamic duo
My Sky Redline has 190k on it. Just did the timing chain water pump harmonic balancer etc. One of my chain guides was broken, but nothing catastrophic. I considered the LDK but the price difference was too great
I hope you guys measured from the transmission mount to the oil slinger on the output shaft of the transmission before tightening up the torque arm and transmission mount. If you didn't you are putting a lot of additional stress on the input shaft bearings on the differential and you will burn up the diff a lot faster. Another thing is you should fill the clutch slave with fluid before putting it in otherwise you will end up having to pump the clutch a lot and let it sit and wait so the air bubble can make it's way up to the master. You will have to do that a whole mess of times before it will be bled properly. Filling it with fluid before installing it makes it a whole lot easier to bleed the clutch.
I also hope you do not have a tune done to the vehicle. The LDK is a weaker engine then the LNF unless you had upgraded internals put in.
This is the first time I’ve heard of the LDK being inferior to the LNF. That’s interesting.
The clutch was primed beforehand so there’s been no issues there.
Cheers.
@@Gabe-ABNCW3 the LDK has powder metal rods and not forged rods like the LNF. The block is stronger because they have reinforced the block to hold the sleeves better. To my knowledge the block is also lost foam casting which is not as good as a sand cast block.
The LHU engine has a closed deck and is the best in terms of block strength. There are no sleeves in it either and the block is sand cast. The same internals are used in it as the LDK and that is the limiting factor.
If the LDK is built with forged internals you can get to 550ish HP before risking the block. The LHU built with forged internals is good to over 600 and the LNF is good to 500.
The same internals that are used in the 2007.5 and newer base models is the same internals used in both the LDK and the LHU and that limits what the HP the engine is able to support which is around 350. While the blocks are better the internals are not.
I don't know why GM did that.
If you join the solsticeforum I can send you massive amounts of information on these cars. I own one that is putting down around 400 WHP which is near 475 BHP.
You didn't respond about the transmission being measured and I don't know if you did that. If you didn't I strongly suggest you do it. I can get you the exact measurement and where the measurement needs to be taken. If it's not correct the engine is going to be tilted and that is going to put a lot of strain on the drivetrain. What also makes a big difference with how the engine sits in the vehicle is where the car was lifted from. If you lifted from the front mounts on the rear control arms and the rear mounts on the front control arms the chassis is not going to sag in the middle as much as lifting the car from in front of the front tires and behind the rear tires. That sag causes a wicked pitch in the engine and transmission.
@@kevinschlossser7858 😮 wow! That is terrific information!!
I’ll definitely be signing on to the forum!
I look forward to further drilling down the details of the installation there. Yeah, wasn’t tracking the measurement bit, so I look forward to correcting that immediately.
Thank you very much for your help!
Cheers!
@@Gabe-ABNCW3 I need to make a correction. The GXP manual transmission does not have a transmission mount. It has the torque arm and that doubles as the transmission mount. If you had a bear of a time getting the torque arm bolts in then you have an alignment problem 100%. The bolt holes in the torque arm are oblong so there is adjustment there. You need to set a straight edge across the bottom of the car and measure from that straight edge to the oil slinger on the output shaft of the transmission. I want to say the magic number is 20mm but I would have to double check that.
@@kevinschlossser7858I own a 2008 Pontiac solstice GXP With the LNF motor. It has RPM aftermarket charge tubes, drop in k&n filter, Trifecta performance tune. I built the LNF motor down in spring Hill, it's the lost foam motor. LDK had the stronger block it was sand cast. You are right about the internals of the engine being weaker.
tom cruises back
Hell yea!
Uuuuuuu W202 in the back😍
Another great video from JR. Thanks
Tappy, tap,tap…. Love it Happy.
Just started the video, but something seems wrong. Gabe doesn’t look injured in any way.
….wait for it
….wait for it
….
06 Saturn Ion 400,000 miles on it with the original clutch the motor went before I stuck the new collection LOL
Wild guess.... JR Enterprises moving to one of those hanger/homes at the airport that featured in a Hoovie episode many months ago.... Good to see Gabe again.... Josh needs to make some cameo's..
I thought a a hangar too, like Hoovie’s, but he said it was a farm
Nah he said he has an option to buy a bunch of land attached.
@Trent Nelson Bit harsh...
Pops, Chris - Ok, I don't listen close enough, I see Josh has bought 40 acres over on the Fractured Rooster channel. That'll be good, land, shed and dwelling... All within ATV distance.
He said Sam crac farm
Gabe is back!
Good video👍🏼
Wheels and the forever broken leg man!
Interesting, measuring car repairs in gestation periods.
Solid "American Dad" reference.
“Today on WatchJRGo, we go into the 5th trimester of the Rolls Royce project… ”
😂🤣🍻🍻
O'Reilly's needs to sponsor you already!
I find that mechanics really trust Oriellys… therefore, I do as well.
@@christopherhamilton5557 I'm more of a hack like Sam Crac so I use FCP Euro & Rockauto
@@cboii9884 yikes you workin on BMW and Mercedes’! 😂 I ain’t got that money!
@@christopherhamilton5557 No I have s#%tbox MK3 VW with controls arms & axles that cost $30🤣
@@cboii9884 😂😂😂
How do Jake have his own channel when he’s at your shop every single day
Wheels and the leg man lmao
Awesome!
i wonder why , he sold the building? after the mezzazine floor , video wall , etc
Engine sits at an angle???
Nope… it’s your screen. 😁
I love this one guys .. HooAh !!
Guy's that engine doesn't look straight? It's leaning to one side.
..i was kinda looking at that too..is that normal?
@@robertoferrari5397 where are you from Roberto? I know some of the Ferrari family.
Looks like you need a sleeping area in the new shop for those long projects when you are to tired to drive home.
From the day the car entered the garage
I followed you and start working on the engine
I would finally be happy to be the owner
of this vehicle, only in Israel there are bureaucratic problems with road vehicles
lol there's problems but it isn't bureaucratic...
Yall should have put a LS engine and a 6 speed trans in this car.
You moving out of your shop
It'll be great when it's ripping down the road
Should be finished up in a couple days 💯
7:43 John Ross gives you the finger.
Good catch!
You really should have resurfaced the flywheel to keep any clutch shutter out.
Flywheel is not resurfaceable for this car
How did Gabe not catch the KS Mafia YT bug too? (Elliott, Westen, Wizard, Ninja, Hoovie, Josh, JR, Tyler, Jake, etc)
I’m the only one with more kids than cars…
LOL !! use a gestation period to determine car how long your cars are out of service.. That's a NEW ONE !! I would copyright that !!🙂
We should put that on a shirt!
T those are the smallest exhaust ports I ever seen on the turbo charged engine the Mazdaspeed MZR engine exhaust ports are huge compared to that
It’s not the size it’s how you use it…
Thought that car was a shop ornament.
I'm sure that Gabe is thinking "it's about time"!
100%!!!!
GABE SIGHTING!!!!!!!!!!!
Gabe, thank you for the jump scare.
Now if you don't mind, I'm going to change my pants.