Would love to see a belt drive train to replace the chain setup. You can 3D print the rear pulley. There are a few videos that showcase how its done. It would be super silent and handle off-road debris much better. Just an idea.
That depends on the motor settings. The bike probably has more power than the Meepo. But its a ugly scooter so it will never be as good a as board in my opinion 😉
Hey! You mention in the video that you're working on V3- the video/ parts list doesn't look to be out yet, but I'm looking to do a build of my own. Could you link the upgraded parts list so I don't buy the wrong stuff? Thanks so much!
Hi, we are still working on this, but here are some ideas for upgrades: 1. More powerful ESC (not sure which one yet) 2. Hub motor in the rear instead of a chain drive (still searching) 3. Add a Devega display to see live speed and battery 4. A separate enclosure for the ESC 5. (if staying with chain drive) custom CNC motor mount I hope this helps!
There are probably a few ways that could be done. A larger more powerful motor and higher voltage battery would help and a change in the gear ratio could also add speed. I would never make anything that goes that fast though
@@DIYesk8Builders haha I don’t blame you man! Anxiety would be through the roof, I was just wondering as I have seen scooters and some other cool equipment get to that speed . Thanks for responding 🤙
Very cool guys! That would sell like hot cakes around raceing pits and swap meets here in the Midwest
Thank you!
For people who may thinks it's slow its fast also it moves quick enough to go faster than most residential street
That's really good
Can you please share the size of frame design? Thanks
This is awesome and I cannot wait for this build to continue becoming the best it can be!
Great work
bro we need v3 in 2 years im sure better motor and battery are avelliable
Switch motor and battery for better center of gravity
Can you do a bike with dual motors next size larger that goes at least 70 mph
Would love to see a belt drive train to replace the chain setup. You can 3D print the rear pulley. There are a few videos that showcase how its done. It would be super silent and handle off-road debris much better. Just an idea.
Hi! We were looking into this and making it a CNC'd pulley. 3D printed might not be strong enough for the amount of torque this thing has.
@@DIYesk8Builders I would think some timing belt pulleys and belts would be quiet and hold up well
@@DIYesk8Builders I've used gt3 belts with 382W x2 on a dual 5mm wide belt and had no issues. That was on a frc robot.
Pro execution guys! Looks like a commercial product.
3.0 version could be street legal, adding own vin number, licence plate and baskit for running errons. Shopping some food and etc.
Working on V3 at the moment!
Is the Meepo Hurricane better than the Beast 2.0?
That depends on the motor settings. The bike probably has more power than the Meepo. But its a ugly scooter so it will never be as good a as board in my opinion 😉
completely different ride feeling! no way to compare a board to a bike
What do you even mean better?
any chance you guys can update the parts list? would love to build this on my mini bike.
We are working in an updated version at the moment!
@@DIYesk8Builders appreciate the update! Can’t wait. Will base my build off of yours.
It looks like the build video isn't around anymore :( Did you delete it? I really wanted to use that video to guide me on my own build :/
Here it is: ruclips.net/video/lidW69cRnZM/видео.html
I cant seem to find the parts you used for the electric mini bike? Mind showing me the parts you used
Dude, I love this. KILLED it!
Thank you man! Good to see you back on YT!
Hey! You mention in the video that you're working on V3- the video/ parts list doesn't look to be out yet, but I'm looking to do a build of my own. Could you link the upgraded parts list so I don't buy the wrong stuff? Thanks so much!
Hi, we are still working on this, but here are some ideas for upgrades:
1. More powerful ESC (not sure which one yet)
2. Hub motor in the rear instead of a chain drive (still searching)
3. Add a Devega display to see live speed and battery
4. A separate enclosure for the ESC
5. (if staying with chain drive) custom CNC motor mount
I hope this helps!
This is so awesome. I'm putting together a build with similar specs, do you have any idea what BMS was used in the battery?
Heya, how have you been doing on your bike?
Parts list?
here: propulsionboards.com/pages/minibike
I have razor e300 scooter get 7 charge that build was nice
Where did you get the mini bike frame?
azusaparts.com/product/minibike-kit-with-6-aluminum-tri-star-wheels/
Can you put some suspensions on?
we want to at some point by changing out the front fork
Hi boys😊
Hi!
Great job, but I see no suspensions... Doesn't it make it hard to ride in uneven roads?
It makes it much harder to ride off road for sure!
@@DIYesk8Builders This means we can expect an even upgraded version in future videos. Good luck :-)
Many more videos are coming!
What would you need to make this go about 60-70 mph love your vids man🤙
There are probably a few ways that could be done. A larger more powerful motor and higher voltage battery would help and a change in the gear ratio could also add speed. I would never make anything that goes that fast though
@@DIYesk8Builders haha I don’t blame you man! Anxiety would be through the roof, I was just wondering as I have seen scooters and some other cool equipment get to that speed . Thanks for responding 🤙
Amazing would do 72v
yes
Frame size ?
do in on a mountain bike