Not to mention changing to a lower capacity battery so it could handle the potential power output.. All that effort to provide a small downgrade on the board 😂
Nope... Increasing power and then reduce power output ist realy 🐂💩 It make no sence. This thing is heavier and have less power then original one... WTF!?
electric longboards may not be as much of a workout, but they do still wear out your legs out after a while. you may not be kicking, but you still have to steer and counter-act inertial forces etc., so your legs are still doing a fair amount of work. it's like doing pushups vs. doing a sustained plank; one is definitely more intense, but both are still workouts.
I loved James acting all surprised when he 'first' saw the skateboard, bc he definitely hasn't been monitoring the project all the way from first idea to the finished product...
@Linmere18 Linmere18 I haven't seen the behind the scenes for this particular video, but the fact that he's the CEO means he probably has his finger in every pie. Even if he's not actively working on a project, he still most likely knows about it. You can see a lot of behind the scenes stuff on Instagram at @thehacksmith and @hacksmith_team
@@simonasremeika6238 He probably knew about that . Cut some slack hes not even an engineer yet; hes studying in college to be one. They didnt make this to really go off-rading anyway.
The 4 motor design was such an elegant way to achieve differential while still driving all 4 wheels. Throwing that out was actually a down-grade in many respects.
That much power on that scale is no joke... No one with the slightest amount of logic will test it's full power... It's like trying to test a 1000hp Supersports bike... It will deffinetely not end good...
without a differential inbetween wheels on the same axis that thing's going to skid like mad on corners, fun if you want to drift everywhere, not so much when you wipeout on every sandy corner
But really though you can choose much cheaper components for a usable product, even in the video he said it's limited to 20% so getting components that have about 5kW would make it much more affordable and you'd still have a similar product. (You can avoid the machining costs altogether by not upgrading the wheels, if you're not going recklessly fast it'll be fine, I think.) You probably won't be needing to upgrade the batteries either, the speed controller and PCB is a necessity though. At the end of the day, it's a hobby, it's not going to be a financially sane decision, you'll lose some money, but the understanding is that it's something you like doing and is hence worth the money you spend on it.
@@larsweibel6192 To be fair an RC diff couldn't handle anywhere near this amount of power. However with all the fabrication capability they have it wouldn't have been especially hard to make one they're fairly simple devices just with somewhat difficult to machine parts.
@@oliverer3 yes, that's what I wanted to say. If a 1/18 RC car has one, you could easily build one for this board. An many parts of this board reminding me on my RC cars, first I though it's a RC car with a skate deck on it😂
@@rocketssss6 who're the one's designing stuff for real applications? I won't bother wait standing up for the answer. I agree that what they do in this channel is just for views.
Nah I'm with you bro, definitely needs a diff. They're gonna hit trails and fields they aren't rock crawling. Rally cars have diffs and that's the closest comparison in the motoring world
@@sebastianozavan9888 limited slip lets the wheels spin without slipping. This would slip around the corner. Terrible and dangerous idea for a skateboard. Maybe would be ok for a drift car, but still, you want open diff at least for the front.
The only thing missing (very minor, though) is diffuser coverings to cover those exposed LED strips. Oh! and racing stripes to make it go even faster! ;-)
Agreed he should of aimend them down not out so they can blind people but that's the least of the problems with this build, by running two wheel off one pulley they are going to have issues turning on pavement not to mention what was the point of upgrading to those massive motors then bottle necking the power lower then the smaller motors.
Color me jealous because I've been plotting something very very similar for the last two years or so, but admittedly on a smaller scale. I was really interested in the VESC open source ESC, multiple can talk to each other over canbus and provide things like traction control and with a bit of tinkering, probably torque vectoring as well. As a 5th year mechatronics major, I am thoroughly impressed and enthusiastic. Definitely want to do some projects hacksmith style in my future
Surprised I haven’t been able to find comments about the coupling shaft between the two pulleys on each side not being a good idea. Unless you plan to only go in straight lines this is going to cause mechanical problems. This is what a differential is for. That’s why you see most dual motor skateboards with both motors on the back or in a diagonal front and back configuration.
??What a quality and inexpensive battery can provide me with a long-term trip. At least 50 miles. You recommend for the construction of a skateboard two powerful motors with a total power of w8000 watts. KV: 600 MAX POWER: 4000W TORQUE: 2.1 NM WIRE WINDS: MAX AMP: 80A MAX VOLT: 12S (50.4V) RESISTANCE: NO LOAD CURRENT: SIZE mm: 63 x 84 (without shaft) WEIGHT (g): 0.955 SHAFT: 10mm with 3mm keyway Accessory pack: NO Internal PCB with 120 degree hall effect sensors
This thing would leave me and my car in the dust so badly. Absolutely insane. One of the best projects on this channel! What KV Rating do the motors have and what would be the theoretical max speed? Meanwhile here in Germany its not even legal to drive any electric scateboard outside your property...
@@olliemeadwell1442 You're thinking about HPV, and the fact that one's chances of contracting it are greatly reduced by being vaccinated for it as an adolescent. *I'm* fairly certain that I have no idea what memory associations Watt media has to a 2 pulley, 1 motor system, how viral the thing you're speaking of is, or how seriously to take your claim, but I imagine that all of this is somehow secondary to the fact that it is the cup that would have to be infected for them to both contract covid from it. I also imagine that it would be really cool to build a motorized, off-road skateboard. check out the links in the description below. =P
I have a suggestion! Wear your PPE (personal protective equipment) Wrist guards, knee, and elbow pads might help. Especially if your locked in to the board like that.
To give some context on how powerful this is. My 69hp/52kw motorcycle (vstrom 650) has a max speed of almost 200kph and can reach 0 to 100kph in 3.8 seconds. Yea, I would limit it to 20% as well.
An rc car can hit 203mph with less than 3hp. Hp has nothing to do with speed/acceleration. At all. Torque and gearing to properly apply that torque is what dictates that. 🤷♂️ The more you know lol
@@Lord_Pistachio_Nut A remote control car is much more aerodynamic than a motorcycle and its rider so you can't compare them. And yes, speed and acceleration have everything to do with Hp since Hp includes torque and rpm.
@@jameswilliamnadeau9448 Hp does mean more speed theoretically but practically it not that linear , increasing hp requires proper set of power transmission system (gears+ automatic clutch etc) which in this video the skateboard doesn't have .
Kilowatt number is certainly impressive to mention...You guys at Hacksmith should mention true realistic informations. You dont need big numbers to get viewers. People most of the time confuse Power(kW) and torque( Nm)... Power is torque multiplied by speed. In other words, Power can be defined as at up to which speed you can keep the torque. You your skateboard can push against a wall with 10 000Newton pounds of force is you want.. but it will produce no power.. only heat. as there is no speed. and 0 multiplied by 10 000 = zero.
Or 4, one for each wheel...lol. It would be overkill, but all you need is to run wires...not drive shafts. Food for thought. I hope everyone will have a great day & be safe. :)
Could you imagine the tire ballooning that monstrosity would cause on a 1/8th? 🤣🤣 I'm all of a sudden compelled to strip down my rc buggy and start a new project 🤣🤣😍
I just watched a 20 minute video about a guy building the most insane electric off-road longboard… To watch him write it on the road for about a minute and 30 seconds
Maybe doing it driving it by itself like Tesla does, to deliver packages, using also your SPIDEYSENSE MASK and GPS. That has potential to scale better than Amazon dropships in the future ,D
1. Buying a 10 kw skateboard
2. Upgradeing it to 44 kw
3. Turn it down to 8.8 kw because to much power
i too was puzzled
thats the point
Well to know it has a 44kw potential is the real deal, honestly though, a trike or go kart, maybe even an electric bike would've been better
I'm glad I'm not the only one that came to that conclusion
Not to mention changing to a lower capacity battery so it could handle the potential power output.. All that effort to provide a small downgrade on the board 😂
I need this!
😱 😱 OHH BRAILLE!! No way!!!!!!!!!! 🙌🙌
They do need this.
Definitely make something for Braille!
Dude your the first comment!? This channel must be sick.
I would watch that
I really enjoy these “little“ projects
“Little”
Little is a relative term
I think we all do
Yaaaa booii
Ya same
13:28 Hollywood shaking in its boots with this level of acting
Literally the comment I was looking for 😂😂😂😂
Not sure if that is sarcasm or a poor reflection on the quality of acting in Hollywood these days....
"Now lets get back to the outro where I pretend..." - Who wouldve thought XD
:3
Oh? You’re approaching me?
And also yay MGM controllers you go guys
@realize lmao it's gonna take a while to recover from that
This fit the Hacksmith list of Hacksmith projects, too much power, overkill on everything, and, of course, weights a heft and a half.
Don't forget the lights. Only someone from Hacksmith would put lights on a skateboard.
@@wra1th075 clearly not apart of the eskate community ;-;
@@jaidencocking7881 Heskate? You have me intrigued friend.
don't forget the frikin' RGB
That's a beautiful collarbone destroyer. LOL
Lemaof
@@susboy1554 lemaof?
@@AnjiMitoGGSThe ment lmfao but he had a stroke during typing
@@AnjiMitoGGST that or
le meatloaf
Yeah, I'll stick with the EUC haha
Overkill: Check
Extra Heavy: Check
This man is a natural born hacksmith
Buff enough to lift the extra heavy result: check
But you gotta remember, he went out of his way to make it safe with the digitally controlled top speed and temperature sensors, so I wouldn't say so.
@@andrew6256 he basically took the skateboard and downgraded it, for some reason
Nope... Increasing power and then reduce power output ist realy 🐂💩
It make no sence. This thing is heavier and have less power then original one... WTF!?
Skateboard people: "Well it can be a real workout"
Hacksmith: "You use legs lmao?"
electric longboards may not be as much of a workout, but they do still wear out your legs out after a while. you may not be kicking, but you still have to steer and counter-act inertial forces etc., so your legs are still doing a fair amount of work. it's like doing pushups vs. doing a sustained plank; one is definitely more intense, but both are still workouts.
@@LiveWire937 without suspension, the vibration also kill your leg loool
I loved James acting all surprised when he 'first' saw the skateboard, bc he definitely hasn't been monitoring the project all the way from first idea to the finished product...
Oh hi! Captain Obvious.
@Linmere18 Linmere18 I haven't seen the behind the scenes for this particular video, but the fact that he's the CEO means he probably has his finger in every pie. Even if he's not actively working on a project, he still most likely knows about it. You can see a lot of behind the scenes stuff on Instagram at @thehacksmith and @hacksmith_team
@@airamplane1234 POV:
Your paid by the hacksmith to plug his social media
@@NotUndertaleAaron unfortunately, no 😔😂
Be super cool if this was a go cart!!🥰😘❤❤
Mechanical engineer: sure, I can soup that up
Every RC enthusist in the world: hold my beer
He's a poor engineer, he made a locked diff for a sk8board
@@simonasremeika6238 Exactly
ikr i would have probably used x-maxx wheels instead of those things
@@simonasremeika6238 He probably knew about that . Cut some slack hes not even an engineer yet; hes studying in college to be one. They didnt make this to really go off-rading anyway.
@@icebrew x maxx wheels wouldn't hold up to that weight or power!
This would be a great entry for Braille Skateboarding's "You make it, we ride it" segments
Its you make it we skate it btw
please make this happen
He made pice of crap. There is nothing to show here.
@@Diselect. a piece of crap? lmao
So right
I love the honesty at the end lol
is the whole thing a lie? stay tuned to find out
You love the fact they are admitting to faking shit?
@@seangauthier8144 thx, cya around pilot
James, when finding the perfect intern:
"I will soon have an apprentice, much more powerful than me"
"And he'll have muscles almost as big as mine, if not bigger!"
The 4 motor design was such an elegant way to achieve differential while still driving all 4 wheels. Throwing that out was actually a down-grade in many respects.
4 motor in that thing would be insane. So it must be done.
But then he wouldn't have an excuse to advertise the stupid powerful motors.
Great statement from the backseat engineer...
they dont know how to program that in
Achieve limited slip
James: has finally broken a bone
Me: The immortal has died
LMFAO
What do you mean 'finally'? This is like the third or fourth time he's broken something and he's had other lingering injuries before
XD LMAO 😂
🤣🤣🤣🤣🤣💀💀☠
The video he mentioned, the MLB Video, is that out already, cant find it
"We increased the power of this thing by a factor of 5" - "I limited the power of this thing to 20%" ...yeah...makes totally sense.
Just sit on it at that point lool
Thats the same power as stock lol
@@ClumsyCars it's lower actually
So they changed nothing.
@@yustforfun nah it’s stock
"We took a skateboard out of the skateboard to make a better skateboard"
Then limited the power to less than it originally was
*"Godzilla had a stroke reading this and died"*
That’s what I found funny also. They bought a Propel EV X4S and then seemed to realize at the end why Propel EV set it to 10kw.
I used the stones to destroy the stones
Then downgrade it so it has less power than stock...
Hacksmith: Try this skateboard
Tony: This aint a skateboard my son, if it doesnt kickflip.
Hacksmith: ....
Braille Skateboarding: Guys, we broke the board..but we flipped it!
James: How much did it cost?
The guy: Oh yeah!
$2,000 (usd) for the board itself.
$1,000 (each) for the new motors.
$720 for the new controller.
Rich kids & their toys......
Hey Obi Wan Kenobi i thought you died?
@@lynked8866 Dude, he's a force ghost
Oh yeah!
@@lynked8866 tell me you didint watch star wars without actually telling me you didnt watch star wars
James: "I don't think anyone has any business with-"
Me and the rest of the longboarding community: "let's do it."
Hell yeah
@@olivererlandsson30 ULTIMATE DOWNHILL
I read “lets do it” the way guga says it
@@defaultname4270 nice
@@grayrose6455 what about UPHILL
The fear in that poor man's eyes as that skateboard nearly fell lmao
its at 7:07
haha yeah need a cable lift to hold it up
must be some Linus energy left over from his last visit xD
You gotta let a pro ride it. I need to see this at it's full potential
I'd say most downhill longboarders would be comfortable.
Yes
That much power on that scale is no joke... No one with the slightest amount of logic will test it's full power... It's like trying to test a 1000hp Supersports bike... It will deffinetely not end good...
MICHAELANGELO FOR THE WIN, BRAH!
“Two pulleys, one motor” lmao
@@kiro_derg pls no
@@kiro_derg yes
The ultimate question and test; will it drift?
Boku!?
Baka
Otsutski
Haha love it
Then race it against a Ferrari and beat it
without a differential inbetween wheels on the same axis that thing's going to skid like mad on corners, fun if you want to drift everywhere, not so much when you wipeout on every sandy corner
its turn radius is probably so big, the lack of a diff probably doesnt affect turning that much
@@trapper1211 It does loose traction on a quick corner, I bet it doesn't even turn normally
@@trapper1211 i don't think so. that's why there is 4 motor at the start.
this is such a cool project,
really gotta hand it to the student for doing everything so well
This is one of those things that you dont have to look up to know you cant afford
But really though you can choose much cheaper components for a usable product, even in the video he said it's limited to 20% so getting components that have about 5kW would make it much more affordable and you'd still have a similar product. (You can avoid the machining costs altogether by not upgrading the wheels, if you're not going recklessly fast it'll be fine, I think.) You probably won't be needing to upgrade the batteries either, the speed controller and PCB is a necessity though.
At the end of the day, it's a hobby, it's not going to be a financially sane decision, you'll lose some money, but the understanding is that it's something you like doing and is hence worth the money you spend on it.
When you’re level 5 with a level 100 item:
@BBC OUTLET no u
@BBC OUTLET uno reverse card
@@aaaz-wt2qf that was so sick that I had to drop a "draw 4" on you and I'm changing the color to Red!!
the shit eating grin on his face when he said two pulleys one motor had me ded
Sameee😭😭😭
I get it. "Shit eating" lmfao
Aww I was really hoping for a differential.
Lol, same
i went straight to the comments when he showed just one axis. i cant continue watching lol
Even a 1/10 and 1/18 RC car has a differential
@@larsweibel6192 To be fair an RC diff couldn't handle anywhere near this amount of power. However with all the fabrication capability they have it wouldn't have been especially hard to make one they're fairly simple devices just with somewhat difficult to machine parts.
@@oliverer3 yes, that's what I wanted to say. If a 1/18 RC car has one, you could easily build one for this board. An many parts of this board reminding me on my RC cars, first I though it's a RC car with a skate deck on it😂
MY SCOOTER DOES 60MPH AND IT'S A RENTAL FRAME REINFORCED AND UPGRADED. I FOUND IN RIVER THEN BOUGHT PARTS AT TOW AUCTION CALLED WYATTS TOWING.
ngl this hacksmith industry lab is like a dream land for engineers, they have everything lol.
Yeah!
But as with most engineers, no real world application or usability. These clowns are terrible.
@@rocketssss6 "as with most engineers" lmao all the products you use on a daily basis was designed by engineers. Shortsighted comment
@@rocketssss6 try harder, kid
@@rocketssss6 who're the one's designing stuff for real applications? I won't bother wait standing up for the answer.
I agree that what they do in this channel is just for views.
It needs a differential, I’m sure that it feels like shit when cornering
It's meant for offroad so it makes sense to not have a differential, if they wanted to implement one they would need to make it manually lockable
Nah I'm with you bro, definitely needs a diff. They're gonna hit trails and fields they aren't rock crawling. Rally cars have diffs and that's the closest comparison in the motoring world
@@sebastianozavan9888 it had four independent motors, so no need for a differential - it should work better than any differential, lockable or not.
@@Dorench i thought most rally car had limited slip differentials, not open ones, but still i understand what you are saying
@@sebastianozavan9888 limited slip lets the wheels spin without slipping. This would slip around the corner. Terrible and dangerous idea for a skateboard. Maybe would be ok for a drift car, but still, you want open diff at least for the front.
The only thing missing (very minor, though) is diffuser coverings to cover those exposed LED strips. Oh! and racing stripes to make it go even faster! ;-)
Agreed he should of aimend them down not out so they can blind people but that's the least of the problems with this build, by running two wheel off one pulley they are going to have issues turning on pavement not to mention what was the point of upgrading to those massive motors then bottle necking the power lower then the smaller motors.
Color me jealous because I've been plotting something very very similar for the last two years or so, but admittedly on a smaller scale. I was really interested in the VESC open source ESC, multiple can talk to each other over canbus and provide things like traction control and with a bit of tinkering, probably torque vectoring as well.
As a 5th year mechatronics major, I am thoroughly impressed and enthusiastic. Definitely want to do some projects hacksmith style in my future
Having some trouble with my spintend but I love VESC Yes. old focbox working great and TB vesc 6. tinystator is not a lie tho
I'm really impressed at how you give students/young engineers an opportunity to do cool stuff!
Surprised I haven’t been able to find comments about the coupling shaft between the two pulleys on each side not being a good idea. Unless you plan to only go in straight lines this is going to cause mechanical problems. This is what a differential is for. That’s why you see most dual motor skateboards with both motors on the back or in a diagonal front and back configuration.
it's not like it was built to last or to function properly, so don't worry about it!
Jesus this thing has more HP than my motorcycle lol
Your motorcycle can probably take advantage of it better though 🤣
@@oliverer3 the car thor huh mp0
Oof
Bruh I read this as hit points
Your motorcycle has low hit points
YOUR THE GOAT OF BUILDS.
Normal people: that's impossible
Hacksmith: what does that mean?
Right
Hacksmith, after inventing a Hulkbuster: *turns off repulsors* What'd you say? I (we) were too busy becoming iron man!
when you build a small car that's more powerful than a pick-up, then build a skateboard that's more powerful than the cyber truck
next up: building a rocket drone that can hold my weight
Geo metro has 55 hp cnde
Is no one going to point out the fact that at 4:08 On the metal cutter they printed a lizal tri boomerang from breath of the wild
Saw that lol 😂
you noticed that?
??What a quality and inexpensive battery can provide me with a long-term trip. At least 50 miles. You recommend for the construction of a skateboard two powerful motors with a total power of w8000 watts.
KV: 600
MAX POWER: 4000W
TORQUE: 2.1 NM
WIRE WINDS:
MAX AMP: 80A
MAX VOLT: 12S (50.4V)
RESISTANCE:
NO LOAD CURRENT:
SIZE mm: 63 x 84 (without shaft)
WEIGHT (g): 0.955
SHAFT: 10mm with 3mm keyway
Accessory pack: NO
Internal PCB with 120 degree hall effect sensors
“I’m not sure it’s smart, but we’re doing it.” Sums up most of the products on this channel
Gamers: I can't skate the boards aren't RGB.
Hacksmith: Say no more
Makes the rgb strips visable by putting them on the side. instead of under so there would be a under glow 😡
if you're gonna have a kickass doodad, might as well make it look awesome too. besides, everyone knows RGB makes it run faster.
This thing would leave me and my car in the dust so badly. Absolutely insane. One of the best projects on this channel!
What KV Rating do the motors have and what would be the theoretical max speed?
Meanwhile here in Germany its not even legal to drive any electric scateboard outside your property...
German laws on (electric) Longboards or stuff like the onewheel xr are such a bummer
@@MarkoSkateMinecraft Yes but thats cause too dangerous for now, they will change soon
As a guess unlimited its top speed could hit 150 - 200 mph (or 240 - 320 Km/h).
@@Lucien86 nah the wheels can’t spin that fast
@@Industry-insider the question was theoretical top speed but you're absolutely right
Props to the cameraman for running fast enough to keep up with the board
That thing is sick! This is real land surfing!! Where can I pick one up?
Your local Walmart
Lol
[edited]
@@Cosmic_Taco I spelled surfing wrong 😆
This is real land suffering
You should put it on full power and try to pull a car
It’s been done with a boosted board and Tesla model S. No problem for this one I’m sure
Jet: *puts 4 times more power on the skateboard*
Also Jet: *limits its power to 20%*
Me: *visible confusion*
Release restraint, level 1
@@SinHurr level what?
To busy wondering if he could he forgot to ask if he should.
That's very engineering thing to do
they are idiots to be honest, hardly any engineering
When I am much older I will make a skateboard like this because this channel has inspired me
Every time I watch a hacksmith video, I feel 10x smarter
“2 pulleys, 1 motor”, I’m pretty sure I’ve heard that somewhere before….
You're thinking about when 2 girls both got covid from 1 cup at that café. If you want the full artict just search "2 girls 1 cup"
@@olliemeadwell1442 uh oh
😳
@@olliemeadwell1442 oh no
@@olliemeadwell1442 You're thinking about HPV, and the fact that one's chances of contracting it are greatly reduced by being vaccinated for it as an adolescent. *I'm* fairly certain that I have no idea what memory associations Watt media has to a 2 pulley, 1 motor system, how viral the thing you're speaking of is, or how seriously to take your claim, but I imagine that all of this is somehow secondary to the fact that it is the cup that would have to be infected for them to both contract covid from it. I also imagine that it would be really cool to build a motorized, off-road skateboard. check out the links in the description below. =P
I think thats the most charasmatic and nice impression i had from an intern so far, would love to see more of him in the future, good job man :)
first guy gets on... & i cant stop yelling GRIP TAPE!!! james goes to get on in the end and has a cast..... now im freaking screaming my head off
Normal people watching this video: "Wow what a dope skateboard!!"
Me: "hmm i wonder if jeff dyes his hair or if its natural..."
“My friend James has a skateboard and it’s pretty cool”
The skateboard:
"This skateboard will be a valuable addition to my collection"
* cough cough *
Hacksmith Industries : Building things humanity don't need but want to see
I don't think I've ever heard James more terrified of an innovation than this... I love it
James: A tech haven with 25 locations across the US, you name it, they've got it.
People who are trying to get a graphics card: ......
? Can you explain this?
Blame crypto miners.
We really need a part two. How much can it pull, can it wheelie, max speed, how many bones can it break ☠️ 😂
😂😂😂
@@ninjafruitchilled ^this. Come on, burn some rubber! All that work and its potential is locked up in software land 🤪
i would like this comment but its at 69 likes and i cant ruin it😂
Yeah someone with balls should drive it
@@gorfawt resistance cleared, next stop 420 🚀
I have a suggestion! Wear your PPE (personal protective equipment) Wrist guards, knee, and elbow pads might help. Especially if your locked in to the board like that.
let Braille skatboarding play with this masterpiece
@@GPOLICE thats his thing im only here for the skateboard shit
@@GPOLICE is he really? Gross.
*doesn't hand start the screws
Threads: Adiós
So no one is going to talk about the genius of "2 pulley, 1 motor" joke? Lol
Took a sec but I got it😆
This should rank higher in the comments!
I don’t get it……like 2 girls 1 cup?
Lul
shout out too the camera men and women for all your hard work
yessir
This is the most overkill thing I have ever seen and I love it
New to this channel eh??
@@kolamaash2736 it’s still pretty overkill but a good kind of overkill
its not overkill if it is worse than the actual product they upgraded. They effectively ruined it.
Hacksmith in a few years : Making a plane by scratch
Imitation is the greatest form of flattery 😉
I love my Bajaboard! This video caught my attention as all I could think was "Hey! It's a Bajaboard knockoff!".
To give some context on how powerful this is. My 69hp/52kw motorcycle (vstrom 650) has a max speed of almost 200kph and can reach 0 to 100kph in 3.8 seconds. Yea, I would limit it to 20% as well.
That's gef will keep on it giud ebough
Jeff trying it out felt like something out of the beginning of a Disney Channel movie lol
imagine modifying an already amazing product into something even better. good job!!
These projects makes me more hype to see James riding a Power Loader
Real exoskeleton go go go!
My electric unicycle runs at 2500W peaks at like 6500W at 100 volts with 3200wh battery. Hits 47mph.
I'd test it out. Got to gear up.
For reference, my motorcycle can do 100mph and makes less than 60HP.
Your motorcycle uses sets of gears to achieve that speed whilst this thing don't have the fancy to have such mechanism.
An rc car can hit 203mph with less than 3hp.
Hp has nothing to do with speed/acceleration. At all. Torque and gearing to properly apply that torque is what dictates that. 🤷♂️
The more you know lol
@@Lord_Pistachio_Nut A remote control car is much more aerodynamic than a motorcycle and its rider so you can't compare them. And yes, speed and acceleration have everything to do with Hp since Hp includes torque and rpm.
@@jameswilliamnadeau9448 Hp does mean more speed theoretically but practically it not that linear , increasing hp requires proper set of power transmission system (gears+ automatic clutch etc) which in this video the skateboard doesn't have .
@@gokudbzsuper7568 I totally agree
Jeff is actually my new favorite co-op 😂😂
Everyone gangsta till the camera man start running the same speed
13:05 So you upgraded ut from 10kw to 44kw then software limit it to 8.8kw?
This was awesome. I loved everything from the extreme overkill, to the sick jams, truely epic.
That's what. Chef about
his face when the board almost fell over was halarious
seconds in to this video I had assumed this board is how you broke your arm. Heal well man. Board looks fun.
Kilowatt number is certainly impressive to mention...You guys at Hacksmith should mention true realistic informations. You dont need big numbers to get viewers. People most of the time confuse Power(kW) and torque( Nm)... Power is torque multiplied by speed. In other words, Power can be defined as at up to which speed you can keep the torque. You your skateboard can push against a wall with 10 000Newton pounds of force is you want.. but it will produce no power.. only heat. as there is no speed. and 0 multiplied by 10 000 = zero.
This new guy looks like he knows what he’s doing……keep him 😎
That one 22kw motor would be sick in a mini buggy. Would love to see two in a UTV.
Or 4, one for each wheel...lol. It would be overkill, but all you need is to run wires...not drive shafts. Food for thought.
I hope everyone will have a great day & be safe. :)
Could you imagine the tire ballooning that monstrosity would cause on a 1/8th? 🤣🤣
I'm all of a sudden compelled to strip down my rc buggy and start a new project 🤣🤣😍
its not 22kw if you pushed that many amps it would burn up and short circuit
Jeff: Its more powerful then the cybertruck
My mind: WAIT WHAT THATS NOT POSSIBLE!
well it is not. it is barely 10hp
For an Breath of the Wild fans, at 4:08 it looks like there was a Lizalfo Tri Boomerang cutout on the machine. Maybe a future project?
Jet: " I don't know what'll happen if I used 100% of capacity"
Skateboard in 100% of capacity: go straight to Mars before Elon Musk
considering it has the power of a 600cc bike in just 10kgs, yh it will do a 360 at full throttle
One man army! Definitely a perfect addition yo hacksmith army!😍
What else can he doooooo
This man is way different. He's just doesn't have the enough technology. Imagine him at 2090
2064 blacksmith makes real blaster with real laser shots
I just watched a 20 minute video about a guy building the most insane electric off-road longboard… To watch him write it on the road for about a minute and 30 seconds
A_Ferrari LaFerrari: "The ultimate question and test: will it drift?"
Me: "D O N ' T"
And yes, this comment is in there if you can find it
Yes they drift but it’s very hard to stay on the board
The sad thing is this comment is below the will it drift comment.
found him
I really wished you would've just hit reply i am internally screaming rn
I love how I can already tell by the title, it’s about to get dangerous.
Wrong chef been 155 moh 1980
What about the electric long board? Isn't it the most similar project to the electric skateboard. Even though you didn't mention it
Maybe doing it driving it by itself like Tesla does, to deliver packages, using also your SPIDEYSENSE MASK and GPS. That has potential to scale better than Amazon dropships in the future ,D
This is unbelieving overpowered, u have inspired me to take engineering.
they made it less powerful because 20% of 44 is less than stock
@@Sol_Creations06 exactly and they have a smaller capacity battery, so all in all it's a real expensive downgrade
Porsh 930 too much power got b and 1989.
I have recently gotten into electric skateboarding and this is my dream!!!
the new boardnamics gear drives are just a dream!!
Now you need a miniature (adjustable for other projects?) rolling road to show us how powerful it is!
Props to the camera man, keeping up with a hack smith build
Ummm 348 years ago?