I love anker stuff! Best banks on the market imho. But even with a massive discount a 1500$ bank is a bit outta my price range haha. I do bring the 30,000ma one camping though always
@Grimm-Gaming a home security camera setup made by Anker. On release it was supposed to be end to end encrypted yet random people were able to connect to them via VLC with minimal effort. It has been patched but it was nuts
Yes. I know that I’m not the only person who was cringing as I was watching him using the lathe with those strings hanging down. It only takes that one time for it to accidentally get caught up in the lathe to cause an extremely bad injury or his death! I know that Ethan and the other guys have had to tell him to be careful more than once!
ive seen firsthand what happens to dangly clothing and the person wearing them around a lathe its pretty nasty on the low end and mind scarring on the high end
I love that Ethan knew exactly where to send Will to find a short chunk of solid stock buried in the snow! The man has a lot of stuff and knows where it all is!
I feel like he is on the spectrum with add and adhd people. My garage is a mess and looks like a landfill to my family. But I guarantee I cal tell you that the screw for the lawnmower in the back yard that holds on the plastic cover is under the left rear tire of my jaguar and has been there for 6 months now. Or how I have sandpaper that fell behind the work bench a year ago that’s 1000 grit. Or he’ll even where I dropped a 10 mm socket by my back fence and it’s still sitting there after 2 years. We never forget anything. Especially if it’s something we handled last. I cannot tell you where anything is tho after my mom comes by and “cleans” up the house while she visits. Lmao I have lost more stuff to her moving something 6 inches than to my kids that touch everything. Atleast my kids have only 4 hiding spots and I can guarantee you will find anything you lost in those places. Yea it makes no sense to others that are normal. But that’s the beauty of having adhd. Everything looks like a tornado came through but we know where it all is at. (Not saying everything in the house is a mess. Just the zones that I personally claim as only mine.) everything else is clean and looks like a hotel room. 😂
I swear i have the same situation.soon as mom comes and does her little cleannup its like we’re lost in a familiar place and cant find shit we’re looking for
Hey machinist Willey! Next time you only have to take off a little bit just run it again without turning any dials. It's called a spring pass. It just takes off the amount that the cutter flexes away from the part. You'll be surprised how often you can go too far without going anywhere!
When going through my machinist class. The math behind it is that when cutting circular stock on a lathe it is actually double the depth of your cut. So cut half of what you want until you get comfortable enough to take the big cuts
Make an electric crosskart "trike" with a battery pack in the back (over track), but have it on a swing arm, so that it works like a servo, making it so you don't have to tilt/ lean while turning, and able to control it while doing a wheelie! This proof of concept can start a new wave of snow machines, since electric snowmobiles as is sucks hard and is anything but premium.
@@Todd_G_FPV Not OP but probably to counterlean during a turn. With long suspension vehicles (without an anti-rollbar) during turns, they have a tendency to lean outwards. this would solve that without using an anti-rollbar (which you want for some reason????).
@@Todd_G_FPV Let me clear things up.. it's a snowmobile, but picture a crosskart trike, the battery can lean from side to side as to shifts the center of mass, it also offset driver weight up front 2, using the battery weight as a feature, and not a flaw like EVERY electric machine ever. it would be MUCH safer during avalanches, and you'd be able to climb RLY well in it. for those who play in snow, this will save lives.
Try and put 45 degree chamfers on both sides of all the teeth of the tracks to give it a leading edge when sliding sideways, this might help with how much the come off when going round a corner
That definitely looks like a blast. once you guys get all the R and D done on those tracks. it should be even more of a blast. and Edwin and Will speak the same language when it comes to this kart.
What happened to Ethan? He's hardly ever on the channel anymore. Nothing against these guys, but Ethan is what brought me to this channel and we get stuck with these dudes.
I've known a few machinists in my days, and they all have a patience level far beyond most people 😂 And this is exactly where it comes from, just sitting and watching
here's the record for the fastest tracked vehicle: The world record for the fastest tracked vehicle is held by a modified M113 Armored Personnel Carrier (APC). In July or August of 1979, this tracked vehicle achieved a remarkable speed of 121.9 kilometers per hour (75.7 miles per hour). Imagine a heavily armored APC zipping along at that pace-it’s quite impressive!The world record for the fastest tracked vehicle is held by a modified M113 Armored Personnel Carrier (APC). In July or August of 1979, this tracked vehicle achieved a remarkable speed of 121.9 kilometers per hour (75.7 miles per hour). Imagine a heavily armored APC zipping along at that pace. I believe in you Will
I love working with old machines. Had a 1970s good way lathe at the last shop I worked for. Amazing tool. Could take some massive cuts. For example it could take a .650 thow interrupted cut comfortably. Or it could turn some perfect sealing surfaces. Also I agree with never using calipers on fits. Gotta mic it! Or test fit! 🤣 you guys are amazing!
NGL GHPC, could throw solar panels on the roof of the shop and have a battery backup system (and I think Anker makes those) which would help the power problems (when they occur)
Anyone who owns a home that can afford solar panels and home battery back up should get that installed ASAP. My power cost has gone up over %20 in under a year. If cost continues to rise, the ROI graph will be a curve, not a straight line
Y'all's content has been killing it lately! The production quality is better than any RUclips channel I can think of. Music is 10, timing and tempo is a 10, freaking everything is off the rails premium! 👁️💯🔥👍🔔
I petition that you guys get a gas tank on the property for all the vehicles that you guys have been building recently! Love the content and keep up the great work guys 💪🏼
Why not? They aren’t rich. If a company is going to offer them a nice chunk of change to advertise their products then they should take the money and run. It’s not like you,me and anyone else reading this wouldn’t endorse someone’s product if the price is right,no matter how janky or unpremium it may or may not be!
Use a small drill bit to make pilot holes before using the step bit. It will save time and make the step bit last longer. Do NOT blow chips off a part without safety glasses or at least close your eyes first.
I love watching Ethan help will learn brings a different dynamic to the channel! Like a mentor! You all make is great to watch! The editing on this would be so hard crazy good!
I can imagine exactly how the GHPC meeting went when you guys decided that you could market yourselves. Someone came up with the concept of a catchphrase and then someone else said “How about PREMIUM”? Everyone agreed, and then you decided to say it CONTINUOUSLY followed by “merch” branding saying the same thing on shirts, hats, cups…I guess I just miss what this channel used to be.
Bud how do you think they can afford to buy stuff and take enough time to build the shit without having a day job…. They had to make it profitable to make this much content this often… they are way less in your face about the merch drops then a lot of other RUclipsrs … tldr quit bitching.
@@jakezanders6598I live miles away from a decent road, and it still gets pretty damn loud. So 🤷🏻♂️. But yeah, I’d be surprised that he has neighbors close enough to complain
its either the motor was too powerful or the tracks were just designed to go much much slower. They probably designed them to go on some kids toy at like 1/10th the RPM
Will has to get out of the habit of just racing as fast as he can to get it done and doing everything half a$$ in the process. Slow and steady wins the race every time.
@@DinosaurEatsRoss It would be cool to see a bunch of remanufacturing/resurfacing and other stuff done to it to get it back to making some fine exact results. But I wouldn't be holding my breath as I haven't stumbled upon such footage in RUclips yet... I think it has a "one man machine" title atm. Meaning only one man knows it's quirks and has mastered it.
Hey, when you really actually love and use a product and they wanna sponsor you? That was going above and beyond just to show his gratitude for a pretty damn impressive product. I get both sides, but there's always a fast forward option 🤷🏼♂️
18 yrs ago I bought a back up generator 30k that runs my whole house. 6,200 squ ft. It runs on propane has a Chevy 4 cly. Hooked it i have a 500 gallon tank. In 12 years it starts 1 time a week for 15 minutes. There was here in Missouri we had a bad ice storm out of electric for 7 days straight. An a lot more other times we was out , it only used 450 gallons propane in that 12 years. Kicks on with in 15 seconds automatic. One of those battery generators be awesome for my Rv. The price is not bad at all. Mine was $12,500. It get hot in Missouri run 2 ac units an every light. Its paid for its self. I live out in the country.
9:04 Nas Beat with the zoom pan well done 👌🏼😉 You should grab some of the solar panels they make I love anker products you have a huge flat roof you could put them on so you’d never have to use electricity unless you wanted to
I love this channel,you guys come up with some absolutely amazing ideas for your projects and your fabrication skills are off the chain! Edit: I can’t believe how friggin’ fast that thing is and it was barely even hooking up! The thing wasn’t even on the fastest setting either, I can’t wait to see this thing when they get it working premium!!!
You guys should integrate both the wheels and the skis together for the ultimate offroad go-kart! The skis just need to be like 1cm higher than the tire so they'll "float" when the ground is solid :D
I would die to have the machine keep it up he can show you so much he is so good when it comes to Mechanics and engineering. You all are great at this that’s why I watch this channel!
The Sno-kart is gnarly! And I just gotta say that the Anker Commercial part was actually extremely well done. Totally made me want one for the PNW winter outages. Premium Content boys.
you should make the bottom smooth like a sled and make the tracks retractable so you can use it like a downhill sled with tracks that can take you back up the hill.
Premium tip: a pitchfork and a metal tined rake work great when you need to find something non-inflatable, that's buried in the snow, when you are too excited to wait for spring.
I see that gives you 6,000-W and an amp rating of 30 amps. If you use the lathe, air compressor, or welder, all separately and not at once, then you should be fine. But you'd benefit from the double setup they have, giving you 12,000-W, or the battery expansions like you said. We thought we were ok here, and didn't need a backup generator. Then the power went out for 31 hours a few weeks ago. The next day we ordered a 22-KW Generac Guardian generator with the automatic transfer panel. It runs off of natural gas or propane. The entire generator with the transfer panel, shipped to the door was about $6500. And then another $700 in parts for the conduit and wire. We wired it ourselves, and it's big enough to run our entire place (including 2 HVAC systems and a boiler) and were able to hook up our neighbor's house also, since they don't have AC, there's not much of an amp draw there. In any power outage though, we just don't run the electric dryer, and likely could go a couple days just hanging laundry.
Hey Will. Always put your heat into the thicker metal and let your puddle wash into the thinner material. That will create better adhesion to the parent material and you wont get the "log" appearance. And as always, setup the welder with practice pieces of the same thicknesses. "Make love to it, don't f@wk it."
It still blows my mind every time I see you guys doing CAD with a track pad. As a professional CAD user I can't imagine how painful that would be to do.😂
Anker has always been a go to brand for me. And thats just crazy how much that thing can run. Imagine charging that from Solar as an off grind machine.
yall incorporated an add into this video and it was done flawlessly. i was interested enough where i was gonna ask a question about the anker charging, but you answered it as i was typing. as always solid entertainment, informative and interest piquing. good ass youtube channel
Join Anker SOLIX F3800 Facebook Group! Share your journey, discover tips, and more! 🌐 facebook.com/groups/ankersolixf3800/
I love anker stuff! Best banks on the market imho. But even with a massive discount a 1500$ bank is a bit outta my price range haha. I do bring the 30,000ma one camping though always
Those battery banks are pretty awesome. Haven't had much faith in Anker since the Eufy drama but i can appreciate a good battery
@@Doggo_Bork whats eufy?
Put that kit on a colman minibike
@Grimm-Gaming a home security camera setup made by Anker. On release it was supposed to be end to end encrypted yet random people were able to connect to them via VLC with minimal effort. It has been patched but it was nuts
Dammit Will! Tuck those hoodie strings in while using the lathe.
Yes. I know that I’m not the only person who was cringing as I was watching him using the lathe with those strings hanging down. It only takes that one time for it to accidentally get caught up in the lathe to cause an extremely bad injury or his death! I know that Ethan and the other guys have had to tell him to be careful more than once!
ive seen firsthand what happens to dangly clothing and the person wearing them around a lathe its pretty nasty on the low end and mind scarring on the high end
My welding teacher would have cut them off
@@GTIFabric sounds like a good teacher
better yet, dont wear a hoodie with strings anywhere near a workshop
I love that Ethan knew exactly where to send Will to find a short chunk of solid stock buried in the snow! The man has a lot of stuff and knows where it all is!
I feel like he is on the spectrum with add and adhd people. My garage is a mess and looks like a landfill to my family. But I guarantee I cal tell you that the screw for the lawnmower in the back yard that holds on the plastic cover is under the left rear tire of my jaguar and has been there for 6 months now. Or how I have sandpaper that fell behind the work bench a year ago that’s 1000 grit. Or he’ll even where I dropped a 10 mm socket by my back fence and it’s still sitting there after 2 years. We never forget anything. Especially if it’s something we handled last. I cannot tell you where anything is tho after my mom comes by and “cleans” up the house while she visits. Lmao I have lost more stuff to her moving something 6 inches than to my kids that touch everything. Atleast my kids have only 4 hiding spots and I can guarantee you will find anything you lost in those places. Yea it makes no sense to others that are normal. But that’s the beauty of having adhd. Everything looks like a tornado came through but we know where it all is at. (Not saying everything in the house is a mess. Just the zones that I personally claim as only mine.) everything else is clean and looks like a hotel room. 😂
Are you gay?
I swear i have the same situation.soon as mom comes and does her little cleannup its like we’re lost in a familiar place and cant find shit we’re looking for
that hands down was the smoothest transition into a sponsor ever, so smooth i almost didn't realise i was been served an advert until the end
fool
It was so cool I was willing to watch the ad because it's a good use of how I'd actually use a product.
I still didn’t realize that it was a sponsored ad till it was over
Yep
I see i was not alone on this, I guess im not the only fool lol and it seem my reply to @DeckoTD has not been posted lol
Gotta love Will sitting 18 inches from the lathe with no PPE on. They don’t call him One Eyed Willy for nothing…
It's the loose hoodie strings hanging around spinny things that get me nervous
safety karen
@@davidanalyst671boomer crybaby
Nobody calls him that
@davidanalyst671 you disagree that he should be more safe around the lathe? At least have safety glasses on and tuck the strings away🤷♂️😄
Hey machinist Willey! Next time you only have to take off a little bit just run it again without turning any dials. It's called a spring pass. It just takes off the amount that the cutter flexes away from the part. You'll be surprised how often you can go too far without going anywhere!
When you find the video within 2 minutes of the upload, it's like I can smell the burnt whatever they're burning this time from the video
Will hasn't grasp the concept of you go in halves on a lathe. But you guys are hysterical as a group to watch. Great video as usual!
this is the comment i was looking for.
Also, don't take hot measurements especially for a press fit
This was the longest Ad I've ever seen in my life.😂😂😂😂
When going through my machinist class. The math behind it is that when cutting circular stock on a lathe it is actually double the depth of your cut. So cut half of what you want until you get comfortable enough to take the big cuts
Yes because you are decreasing the radius by the amount you move. So it takes that much off of each point all the way around the circumference.
1/2” cut on the radius is a full 1” off the diameter.
Make an electric crosskart "trike" with a battery pack in the back (over track), but have it on a swing arm, so that it works like a servo, making it so you don't have to tilt/ lean while turning, and able to control it while doing a wheelie!
This proof of concept can start a new wave of snow machines, since electric snowmobiles as is sucks hard and is anything but premium.
or just put the motor and tracks on the barbie boat to make it amphibious all weather
Sorry but I'm confused why would u have to lean/tilt in a cross cart to turn? They have 4 wheels? We'll tracks if I'm reading this right lol
@@Todd_G_FPV Not OP but probably to counterlean during a turn. With long suspension vehicles (without an anti-rollbar) during turns, they have a tendency to lean outwards. this would solve that without using an anti-rollbar (which you want for some reason????).
@@Todd_G_FPV Let me clear things up.. it's a snowmobile, but picture a crosskart trike, the battery can lean from side to side as to shifts the center of mass, it also offset driver weight up front 2, using the battery weight as a feature, and not a flaw like EVERY electric machine ever.
it would be MUCH safer during avalanches, and you'd be able to climb RLY well in it.
for those who play in snow, this will save lives.
longest anker ad of all time
sponsorblock my beloved
💀
@@p1ngerss its embedded in the video..ad blockers wont do shit pal loll...its part of the video cuz they are smart.haha bastards !!
23:10 Was pretty much anyone's throttle and speed dream. I felt every push of the accelerator and every turn of the wheel.
Try and put 45 degree chamfers on both sides of all the teeth of the tracks to give it a leading edge when sliding sideways, this might help with how much the come off when going round a corner
Will is getting really good at “crafting”. It is nice to see how he developes as a builder. He got a really good teacher!
Less sketchy than many of Grind Hards builds! As Always, May God Bless you and yours! 😇
That definitely looks like a blast. once you guys get all the R and D done on those tracks. it should be even more of a blast. and Edwin and Will speak the same language when it comes to this kart.
I'm very disappointed that Ethan's beanies were not used in the cushioning of that battery 😎
Right? Lol, I bet that they are still in there on the little red truck build! 🤣🤣🤣
im pretty sure they used them all XD
As an Aussie, it was refreshing to hear Will ask for a 19mm spanner when the track came off the first time
we use standard and metric for tools
U guys needa make premium ratchet straps😂
i hope those guys paid you allllll the money for that ad. You did such an amazing job i forgot I was watching an ad.
Hey GH! I just wanted to thank you guys for making such great content, you all are a HUGE inspiration for me, and my channel. Keep it premium!
What happened to Ethan? He's hardly ever on the channel anymore. Nothing against these guys, but Ethan is what brought me to this channel and we get stuck with these dudes.
he's been hard at work with the chopper! Video about that coming this Friday, stay tuned!
I've known a few machinists in my days,
and they all have a patience level far beyond most people 😂
And this is exactly where it comes from, just sitting and watching
Will lookin like Freddy Mercury w his mustache 😂
Ha! Truth
100%. But remember, Will might have to google who that is. And then put his phone in his back pocket
here's the record for the fastest tracked vehicle: The world record for the fastest tracked vehicle is held by a modified M113 Armored Personnel Carrier (APC). In July or August of 1979, this tracked vehicle achieved a remarkable speed of 121.9 kilometers per hour (75.7 miles per hour). Imagine a heavily armored APC zipping along at that pace-it’s quite impressive!The world record for the fastest tracked vehicle is held by a modified M113 Armored Personnel Carrier (APC). In July or August of 1979, this tracked vehicle achieved a remarkable speed of 121.9 kilometers per hour (75.7 miles per hour). Imagine a heavily armored APC zipping along at that pace. I believe in you Will
"heavily armored" hahahaha
Anker makes some really good bluetooth speakers too. Their whole soundcore series is pretty nice.
Quick tip. If you need to find something in the snow you can use a flamethrower to clear the snow
Remember there machinist Willy if you take a little bit off on a lathe it takes it off x2!! So that little bit is doubled haha
I love working with old machines. Had a 1970s good way lathe at the last shop I worked for. Amazing tool. Could take some massive cuts. For example it could take a .650 thow interrupted cut comfortably. Or it could turn some perfect sealing surfaces. Also I agree with never using calipers on fits. Gotta mic it! Or test fit! 🤣 you guys are amazing!
NGL GHPC, could throw solar panels on the roof of the shop and have a battery backup system (and I think Anker makes those) which would help the power problems (when they occur)
Anyone who owns a home that can afford solar panels and home battery back up should get that installed ASAP. My power cost has gone up over %20 in under a year. If cost continues to rise, the ROI graph will be a curve, not a straight line
Y'all's content has been killing it lately! The production quality is better than any RUclips channel I can think of. Music is 10, timing and tempo is a 10, freaking everything is off the rails premium! 👁️💯🔥👍🔔
Well when you get paid to run a 7+ minute ad in the middle of your content, you have money to spare for production value
Unexpected but appreciated non Friday upload ❤
I petition that you guys get a gas tank on the property for all the vehicles that you guys have been building recently! Love the content and keep up the great work guys 💪🏼
YEAAAH MORE VIDS ABOUT THE GO KART
Boy, you guys will sponsor anything anything that will give you guys money🤑
Lol they aren't sponsored that often you should consider how relevant that battery is for them
Why not? They aren’t rich. If a company is going to offer them a nice chunk of change to advertise their products then they should take the money and run. It’s not like you,me and anyone else reading this wouldn’t endorse someone’s product if the price is right,no matter how janky or unpremium it may or may not be!
Sorry but I don’t care about anything else but seeing that monster chopper run! I got blue balls from the anticipation!
Surprise midweek upload! Thanks boys!
Y’all need to somehow get a junk moped and electric swap it that would be insane
Use a small drill bit to make pilot holes before using the step bit. It will save time and make the step bit last longer.
Do NOT blow chips off a part without safety glasses or at least close your eyes first.
I love watching Ethan help will learn brings a different dynamic to the channel! Like a mentor!
You all make is great to watch!
The editing on this would be so hard crazy good!
My "off road" mobility scooter sucks. Can you make me one that actually has some real power so I can go on trails?
i love this channel so much that i'm willing to watch their ads
I can imagine exactly how the GHPC meeting went when you guys decided that you could market yourselves. Someone came up with the concept of a catchphrase and then someone else said “How about PREMIUM”? Everyone agreed, and then you decided to say it CONTINUOUSLY followed by “merch” branding saying the same thing on shirts, hats, cups…I guess I just miss what this channel used to be.
Bud how do you think they can afford to buy stuff and take enough time to build the shit without having a day job…. They had to make it profitable to make this much content this often… they are way less in your face about the merch drops then a lot of other RUclipsrs … tldr quit bitching.
When you guys post it makes the day just a little better every time, also motivates me to work on my projects!
I can't wait to see the MonsterCycle drive under its own power
Not a big fan of Sponsored Products. But that charging unit is impressive.
Who wants to bet that Ethan's neighbors appreciate the E-rippers more than the IC rippers.
Pretty sure his nearest neighbor is a few miles up the road
@@jakezanders6598 pretty sure I've heard Ethan comment regarding his neighbors and the noise in the past.
Lol what neighbors.
@@jakezanders6598I live miles away from a decent road, and it still gets pretty damn loud. So 🤷🏻♂️. But yeah, I’d be surprised that he has neighbors close enough to complain
I can't believe you guys are at 2.3 million subscribers. Love the videos
"When it works, it rips" is basically the motto for everything Will makes, I love it haha
Finish the chopper build!!!
hes working on it. lolz. not everything on youtube is done in one week and then you get a vid.
Why? Then they can’t milk the videos for a few more months lol. Not that I complaining. But still
1:00
China understands something. There is a market for anything.
That motor is wayyyy too powerful for the tracks! 😂
its either the motor was too powerful or the tracks were just designed to go much much slower. They probably designed them to go on some kids toy at like 1/10th the RPM
@@davidanalyst671 Agreed. 👍
Will has to get out of the habit of just racing as fast as he can to get it done and doing everything half a$$ in the process. Slow and steady wins the race every time.
This comment is for hoping for a new lathe to appear.
You leave that atlas lathe alone lol I’ve got the same one
@@DinosaurEatsRoss It would be cool to see a bunch of remanufacturing/resurfacing and other stuff done to it to get it back to making some fine exact results. But I wouldn't be holding my breath as I haven't stumbled upon such footage in RUclips yet...
I think it has a "one man machine" title atm. Meaning only one man knows it's quirks and has mastered it.
Your the best that North Idaho has its awesome to see you guys around town
the 7 minute sponsor segment was unnecessary
Google RUclips ReVanced thank me later
@@ryancottingham925There are browser plugins for desktop too.
Took less time to skip forward then to bitch about it, but that is what bitches do.
Hey, when you really actually love and use a product and they wanna sponsor you? That was going above and beyond just to show his gratitude for a pretty damn impressive product. I get both sides, but there's always a fast forward option 🤷🏼♂️
It was, I usually leave a video when i have to skip a sht ton to avoid these ads..
18 yrs ago I bought a back up generator 30k that runs my whole house. 6,200 squ ft. It runs on propane has a Chevy 4 cly. Hooked it i have a 500 gallon tank. In 12 years it starts 1 time a week for 15 minutes. There was here in Missouri we had a bad ice storm out of electric for 7 days straight. An a lot more other times we was out , it only used 450 gallons propane in that 12 years. Kicks on with in 15 seconds automatic. One of those battery generators be awesome for my Rv. The price is not bad at all. Mine was $12,500. It get hot in Missouri run 2 ac units an every light. Its paid for its self. I live out in the country.
For every like l will do nothing.
And I'll double that
Weak
I know something I’d prefer you to do. But it wouldn’t be nothing. Or for now, just stop being such an attention seeking loser and go away
Like evening else in your life.....
You exist… That’s already nothing
9:04 Nas Beat with the zoom pan well done 👌🏼😉
You should grab some of the solar panels they make I love anker products you have a huge flat roof you could put them on so you’d never have to use electricity unless you wanted to
7 views in 30s, they fell off
Fr
2k in 6 min
4 k in 11 min
5k in 14 min
6.5k 17 mins let it go mate your the irrelevant one🤣
I love this channel,you guys come up with some absolutely amazing ideas for your projects and your fabrication skills are off the chain! Edit: I can’t believe how friggin’ fast that thing is and it was barely even hooking up! The thing wasn’t even on the fastest setting either, I can’t wait to see this thing when they get it working premium!!!
Thank you very much!
I love that throughout every video of the go cart the stance gets wider
This kid Willy is great, his slightly wrong word usage; "curmudgeon", "swindle", cracks me up.
You guys should integrate both the wheels and the skis together for the ultimate offroad go-kart!
The skis just need to be like 1cm higher than the tire so they'll "float" when the ground is solid :D
Best content out here right now!
I would die to have the machine keep it up he can show you so much he is so good when it comes to Mechanics and engineering. You all are great at this that’s why I watch this channel!
Definitely more vids about the go-cart!! keep up the good work!!!!!
All about the crash games here started on a whim now I can’t stop the excitement just builds 🚀
I kind of like the videos where Steve and Will do stuff together and get to have fun togethe 👍
You guys are insane… and I love it
You guys have got to make a mini Ripsaw tank.....that would be epic....
Love that 4ra lets us bet and get our winnings fast, no waiting like other places 🕒💰
The Sno-kart is gnarly! And I just gotta say that the Anker Commercial part was actually extremely well done. Totally made me want one for the PNW winter outages. Premium Content boys.
Every time a new GH Plumbing video releases, is a PREMIUM day
Love how 4ra keeps adding new features, always something exciting to check out 🔍
you should make the bottom smooth like a sled and make the tracks retractable so you can use it like a downhill sled with tracks that can take you back up the hill.
Bro. Thanks for showing your new power pack. Great solution to problems we have.
Premium tip: a pitchfork and a metal tined rake work great when you need to find something non-inflatable, that's buried in the snow, when you are too excited to wait for spring.
Love hearing the giggling when your driving it!!
Lift it 6-12 inches for clearance and you'll be golden!
I see that gives you 6,000-W and an amp rating of 30 amps. If you use the lathe, air compressor, or welder, all separately and not at once, then you should be fine. But you'd benefit from the double setup they have, giving you 12,000-W, or the battery expansions like you said.
We thought we were ok here, and didn't need a backup generator. Then the power went out for 31 hours a few weeks ago. The next day we ordered a 22-KW Generac Guardian generator with the automatic transfer panel. It runs off of natural gas or propane. The entire generator with the transfer panel, shipped to the door was about $6500. And then another $700 in parts for the conduit and wire. We wired it ourselves, and it's big enough to run our entire place (including 2 HVAC systems and a boiler) and were able to hook up our neighbor's house also, since they don't have AC, there's not much of an amp draw there. In any power outage though, we just don't run the electric dryer, and likely could go a couple days just hanging laundry.
The package at the beginning looked like a fourwheeler/motorcycle seat imo 😂😂
Hey Will. Always put your heat into the thicker metal and let your puddle wash into the thinner material. That will create better adhesion to the parent material and you wont get the "log" appearance. And as always, setup the welder with practice pieces of the same thicknesses. "Make love to it, don't f@wk it."
Hopefully this goes better than when the Cybertruck gets a lil wet. This is gonna be sketchy, keep up the great work guys.
Having a mouse for CAD is honestly life changing. I’m sure you all have mastered the two finger touch though.😉
on a freshly groomed snowmobile trail that thing would take your fun to a new level
Grind hard is the best!!!!!!
I'm pretty sure that's the longest sponsored segment I've ever seen in a RUclips video lol.
literally 6-7 mins for a battery bank
Love the new shop you guys have. Big step up from the other one. Keep up the great builds!
YOU SHOULD DO SOLOR TO YOUR ANKER FROM TOP OF ROOF!!! GREAT IDEA!! AMAZING CONTENT AS ALWAYS
a 'kurmudgen' , new unit of measure for everyone . Love it. 😁
It still blows my mind every time I see you guys doing CAD with a track pad. As a professional CAD user I can't imagine how painful that would be to do.😂
Came to skip ahead while at work
Later ill be back for long form!
THANKS FOR THE DROP!
Thanks for making me chuckle boys!
I love that adult size ev power-sports devices just sound like
Really big RC cars
I just commented almost the same as a RC guy this is just a Blast
Anker has always been a go to brand for me. And thats just crazy how much that thing can run. Imagine charging that from Solar as an off grind machine.
yall incorporated an add into this video and it was done flawlessly. i was interested enough where i was gonna ask a question about the anker charging, but you answered it as i was typing. as always solid entertainment, informative and interest piquing. good ass youtube channel
They are required to clearly state that it's an ad and they didn't so I don't think it was flawless...
The style of content is 🔥 I like the little quick projects will does combined with Ethan’s more complex stuff like the monster chopper
It fits my definition of a proper deathcart: just causes manic cackling the entire time you are ripping on it.