Black Friday Special! Get all the paid tools and elements I've made for only $25 on the Fourthwall Store. 😲Save $187.98 😲 🌟🌟 Just add all of them to the cart and the promo code will be automatically applied. Check out the collection: link.sualvi.com/BFBUNDLE
my video is vertical and i want to create insta reel which is horizontal, but the issue is when i use intelltrack the vertical video is nottracking and fit inside the horiznontal video when i used it firs time it was working but i forgot the setting i used that time how can i do this please help me
I haven't used intelltrack, for some reason it was bugged out when I was trying it out so I skipped it. I'll have to look into it again. Maybe there is someone that has made a specific video covering. That's why I also used the normal tracker on the latest free tool I made.
w video thx g my first tracking didnt do the best i think cause video zoomed in already and maybe need it bigger the square i try again and im sure be good thanks for the video
Yea, it would be the same concept. It just depends on the motion blur of the footage. If it has too much blur, you will have to go back and readjust the tracker when it gets lost.
You should be able to see the points in the viewer when you have the tracker node selected. And then just click on it, and it should change from green to red and then you can move them. Or use the Position controls in the inspector on a specific keyframe.
How the hell do you go in an manually adjust the points afterwards when something gets in the way???? I've been trying to figure this out for almost 2 hours now bro and I just cannot figure it out. I know it wasn't the focal point of the video so it's just something that you skimmed over but man I've probably watched this video 20 times trying to figure out how you manage to do that
With the tracked selected, go to where the point is and you should be able to click on it and selected it to make adjustments. Make sure that "Shot Controls" is on on your viewer. If you are not able to do that, you can try adjust the position in the inspector, although that usually only moves the tracker and not the actual traking point. Hope that helps 😅
@@SUALVI I’ll try my best later today when I’m back on my computer. I couldn’t believe how little information there was out there about doing it manually in just the normal tracker and not the planar tracker, im sure it’s on me lmao. Either way I really appreciate you getting back to me and trying to help me out that means a lot!
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Black Friday Special! Get all the paid tools and elements I've made for only $25 on the Fourthwall Store. 😲Save $187.98 😲 🌟🌟 Just add all of them to the cart and the promo code will be automatically applied. Check out the collection: link.sualvi.com/BFBUNDLE
Finally someone who just gets to the point. Thanx!
No way to make it better. Right to the point. Great guide.
Thank you brother!
Thanks Shrapnel!
Commenting for algorithm. Thanks for a direct video.
Thanks! Really appreciated!
Excellent but when I click on “track forward” I get a warning render did not complete
Sometimes that can happen if there isn't something going into the tracker.
Adding comment to rank this on the algorithm 🔥🔥🔥
i've done these tracker tutorials over and over and they don't work. the transform node is not moving ,
The transform node that you put after the tracker?
Thank you man ! This video is exactly what everybody wants when searching how to make a camera tracking effect
is there a way to remove the motion blur?
From the clip? Or from the tracker?
@@SUALVI I actually used topaz to remove the blur from when the tracker moves the image, looks sick 🔥
my video is vertical and i want to create insta reel which is horizontal, but the issue is when i use intelltrack the vertical video is nottracking and fit inside the horiznontal video when i used it firs time it was working but i forgot the setting i used that time how can i do this please help me
I haven't used intelltrack, for some reason it was bugged out when I was trying it out so I skipped it. I'll have to look into it again. Maybe there is someone that has made a specific video covering. That's why I also used the normal tracker on the latest free tool I made.
w video thx g my first tracking didnt do the best i think cause video zoomed in already and maybe need it bigger the square i try again and im sure be good thanks for the video
You should try and make this a short (if you haven't already). It may get even more traction.
There is a short of it. YT just doesn't recommend it 🤦♂️
I'm having problems woth readjusting thw tracker lol I don't get it.
Like what exactly? You can't move them around?
i think this is only for the studio version.
Nope
@@SUALVI you're right bro! thank you so much!
Lessgo 🔥
Can we have a longer version of this please? I need to watch it 10 times to see what you are doing.
Will look into it 😉
is this for only studio version cause mine is showing warning last frame successfully renderd: none ??????
Nope. Try making your clip one frame shorter.
Subscribed!
Would this work for tracking an athlete? Basketball and Football. ps. just learning how to use resolve
Yea, it would be the same concept. It just depends on the motion blur of the footage. If it has too much blur, you will have to go back and readjust the tracker when it gets lost.
how do u move the tracker thing cuz it wont let me
You should be able to see the points in the viewer when you have the tracker node selected. And then just click on it, and it should change from green to red and then you can move them.
Or use the Position controls in the inspector on a specific keyframe.
50 second video?! LIKED, SUBSCRIBED, AND MY FIRSTBORN SON'S SOUL!
How the hell do you go in an manually adjust the points afterwards when something gets in the way???? I've been trying to figure this out for almost 2 hours now bro and I just cannot figure it out. I know it wasn't the focal point of the video so it's just something that you skimmed over but man I've probably watched this video 20 times trying to figure out how you manage to do that
Like at 0:26
With the tracked selected, go to where the point is and you should be able to click on it and selected it to make adjustments. Make sure that "Shot Controls" is on on your viewer. If you are not able to do that, you can try adjust the position in the inspector, although that usually only moves the tracker and not the actual traking point. Hope that helps 😅
@@SUALVI I’ll try my best later today when I’m back on my computer. I couldn’t believe how little information there was out there about doing it manually in just the normal tracker and not the planar tracker, im sure it’s on me lmao. Either way I really appreciate you getting back to me and trying to help me out that means a lot!
do we need studio version for this?
Nope.
@@SUALVI it's not work for me. It asking me 299$ for use this tracking 😮💨
You are not using the normal tracking node then. Find the normal tracker. You might be trying to use the 3dcamera tracker or something like that.
@@SUALVI yes you're right, I used cameratracker instead of tracker, thank you brother!!
@@leebuimagic You're welcome!
saving this 🙏
Find my latest plugin "The PaperFold Fx" plugin right here: paperfoldfx.com 🎉🎉
when I try to do it I have "WARNING! Render did not complete !" what to do with it ?
That's odd, I don't remember ever having that issue. Is the node connected properly?
Thanks 🎉
Why is it so friggen hard to find a tutorial on how to fix a track. Im about 1 more video away from giving up davinci
😢 just aelwct the node and then click on the green path. It will turn red and you can select the points you want to fix and move them.
CONTROL and SPACEBAR doesn't work in 18.5 (Mac)
It would be command spacebar on Mac I think 😉
It isn’t, command and spacebar opens the search tool
I did some research, its shift and spacebar
@@sooper_oof_gamer checked comments hoping for this answer, thank you, shift+spacebar works
Straight to the point thanks man
Straight to the point! thank you bro!!
is this for only studio version cause mine is showing warning last frame successfully renderd: none ??????
Finally found a video on this, thank you so much.
is this free feature?
yes
I've never been able to do that properly, but this video fixed everything. Thank you for the quick and detailed explanation!
Saved my day! ❤🩹
Yessir
no "open in fusion" menu item in 18.5
That's most likely a bug on your end. I'm on 18.5 and use it all the time... You can also press the Fusion tab with the clip selected 😉
Dope
AWESOMEEE!!!
straight to the point. I was impressed. good tutorial. Subscribed
Love it when something is straight to the point
Thank you
clutch
Good video straight to the point
Thank you sir. Good info for everyone looking.
is this for only studio version cause mine is showing warning last frame successfully renderd: none ??????
Amazing! Thank you!
Thank you!!
u da man! TY
Спсиба!
10/10 thanks
thank you bro
Hola.
Demasiado rápido y breve, aunque se arregla viéndolo más veces
Saludos.
jajaja, la proxima vez que grabe voy a intentar hacerlos mas lento. Basicamente descarte todo lo extra que seria blabla😅
Tldw
tb2xs
Can you do this a little faster next time so I only have to repeat it 95 times. Lol thanks but man come on.
I can try 😉🤣
Thank youuuuu!
For sure! Glad to help!
Thank you a lot!
Thank you so much
no, too fast, I did not understood
SKASE
Thank you!!