Thanks mate, you're a freaking legend!! Cannot fathom what Volkswagen engineers were thinking with these bolts.... If the "thief" is already at this stage, then they are determined enough to do this. These only prevent them from quickly bypassing the steering lock, you still need the key transponder to operate the ECU security and make the engine run. Anyway, your method is brilliant. Not sure about other VAG cars of this ilk, but my Golf is nigh on impossible to work on these bolts any other way. Again, thank you so much!
I'm about to replace mine tomorrow and I need to know if I can do this even if the car key cannot turn (and disconnecting the battery as well, because of the airbag) Please answer 🙏
Looks like this would work on my 2006 rabbit. The key won't turn all the way but it'll turn on accessories etc. The key will even spin in circles sometimes.
Zdravím, další tyden mi budou v servise menit spinač zapalovani, bude mozné pak pouzit moje puvodní kliče s centrálním zamykáním nebo se musi pak k novemu spinaci udelat nové??
I didn’t notice airbag on no this; my question is: Can the ignition be changed out without having to remove steering wheel? I have an ‘07 gti TFSI- I don’t wanna mess with the airbag, but it looks like I’m gonna disconnect the battery anyways. ONE HAND BOY - U DA MAN!
I've managed to take everything off even the anti theft screws, only problem I have is that I can't seem to realise my key from the lock and its just spinning in circles, even when I'm trying to use a pin to realise it nothing is working any ideas guys? I'm stuck
Cauko, ak smiem tykať, chcel by som sa ťa spýtať, že aký kábel OBD na diagnostiku používaš, ktorý ti komunikuje s VCDS, poprípade ak by si mohol tak mi ho aj poslať (názov alebo čo) prosím. Pretože som si kúpil jeden a ten mi s VCDS programom v kompe nechce komunikovat, tak som si stiahol nejaky iny, ale na nom mi číta údaje, ktoré su mi akurát tak hovno platné!
You really do. (or insert a right angle metal-cutter/engraver into the top (very hard to find), cut out a channel, then use a right angle flat head screw-driver to undo --- I did this with one bolt, but it was a real @#$@)
@@JustinShaedo thanks for the reply. I did managed to make the holes and take bolts out how this guy did it...took forever but anyway I just got my new key cylinder and it looks like I will have to cut the bolts to screw them back in
@@Wolfgio probably too late, but get new bolts from the hardware store! M8 fit mine okay, and with a spacer (long washer) they protrude out the top, making any future removals very easy. FWIW I share your trials and suffering on this one!
Thanks mate, you're a freaking legend!! Cannot fathom what Volkswagen engineers were thinking with these bolts.... If the "thief" is already at this stage, then they are determined enough to do this. These only prevent them from quickly bypassing the steering lock, you still need the key transponder to operate the ECU security and make the engine run. Anyway, your method is brilliant. Not sure about other VAG cars of this ilk, but my Golf is nigh on impossible to work on these bolts any other way. Again, thank you so much!
Replaced the ignition lock on my 2008 Tiguan. Thanks for the video!!
Can’t thank you enough your vid saved the day made the job very easy and stressless thank you. 👍👌
Благодаря за клипа поздрави от България
Brilliant move with the screw driver and hammer for them bolts! Going to give it a try now.
Excellent tutorial. Really first class. 👍🏻
Thank you for this. Saved me a fortune
Thankyou you are a legend, and have saved me a lot of trouble. This is the same for VW caddy SDI (09)
Perfect. Thanks so much. Take your time guys, this ain't a job where a bit of brute force does you any good at all.
Yea... tell that to the security bolts I had to use an extractor with lol..
Always disconnect the battery before removing the air bag. Replace air bag, turn ignition to on position - 'then' reconnect the battery.
Ikr as soon as i seen his acc board light up, I almost thought it was the end for him lol!
Please explain. What is difference with ignition on or off to the airbag when reconnecting the battery ???
@@Bill_9797 same quesy
I'm about to replace mine tomorrow and I need to know if I can do this even if the car key cannot turn (and disconnecting the battery as well, because of the airbag)
Please answer 🙏
Looks like this would work on my 2006 rabbit. The key won't turn all the way but it'll turn on accessories etc. The key will even spin in circles sometimes.
TOP TOP TOP many Thanks, its great!
Thanks
It's much easier without removing steering weel ..
How do I do it without removing the wheel?
Te BEST comentary
Legend, thanks man
Zdravím, další tyden mi budou v servise menit spinač zapalovani, bude mozné pak pouzit moje puvodní kliče s centrálním zamykáním nebo se musi pak k novemu spinaci udelat nové??
Fo i have to change anything else or program new key
I didn’t notice airbag on no this; my question is: Can the ignition be changed out without having to remove steering wheel? I have an ‘07 gti TFSI- I don’t wanna mess with the airbag, but it looks like I’m gonna disconnect the battery anyways. ONE HAND BOY - U DA MAN!
Absolute legend ⚡
I've bought a car with all keys lost,how do i do the part where you get the steering lock off as I haven't got a key that fits the barrel
Thanks , its worked well
Thank you
The key barrel is stuck in ignition lock and the key won’t turn to the position where you can put the pin in, what do I do?
Excellent video, thank you!
very good
Hi where can I find Golf 5 door lock cylinder? I can't find on AliExpress there are only for golf 4
I've managed to take everything off even the anti theft screws, only problem I have is that I can't seem to realise my key from the lock and its just spinning in circles, even when I'm trying to use a pin to realise it nothing is working any ideas guys? I'm stuck
Great video,thanks for share.
+1 subs 👍
Hi man just got same problem 😢. If I buy new barrel do I need to program the keys or it’s straight swap
did you find out mate?
I see you a have a working key...is the procedure the same without a working key ?
Yes
Shear bolts 8:00
👍 🔥 👍
Biz bu işi 20 dakkada tamir ediyoruz
Türkçesi kanalımda. 😅
Cauko, ak smiem tykať, chcel by som sa ťa spýtať, že aký kábel OBD na diagnostiku používaš, ktorý ti komunikuje s VCDS, poprípade ak by si mohol tak mi ho aj poslať (názov alebo čo) prosím. Pretože som si kúpil jeden a ten mi s VCDS programom v kompe nechce komunikovat, tak som si stiahol nejaky iny, ale na nom mi číta údaje, ktoré su mi akurát tak hovno platné!
u really have to make a hole??
You really do.
(or insert a right angle metal-cutter/engraver into the top (very hard to find), cut out a channel, then use a right angle flat head screw-driver to undo --- I did this with one bolt, but it was a real @#$@)
@@JustinShaedo thanks for the reply. I did managed to make the holes and take bolts out how this guy did it...took forever but anyway I just got my new key cylinder and it looks like I will have to cut the bolts to screw them back in
@@Wolfgio probably too late, but get new bolts from the hardware store! M8 fit mine okay, and with a spacer (long washer) they protrude out the top, making any future removals very easy.
FWIW I share your trials and suffering on this one!