I ordered 5 TPMS's (including the one for the spare) from AMZ for about $45 and had them installed in Costco Tire Center for $70. They have been working well on my 05 SR5 for 6 years as of today. Will try this trick next time when needed. Great video
I wanted to personally thanks you. Took all of less than -0 minutes. The hardest part was taking some of the tape off the wire. Very easy to do. Dealership gave me an estimate of 430. Cost me zero. I had everything in and electrical tool box. Thanks again
Thank you for posting this. I have a 2004 that needed a new TPMS in the spare and two rear tires. I was quoted $300 to replace all five sensors. The splice connector on the two wires worked perfectly. Thanks for sharing
Dude, you so totally rock! THANK YOU for this amazingly simple fix that now saves me from having to keep replacing these stupid sensors on my 2004 SR5 V8 T4R at $90 a pop.
Wow! That easy, goes on today's "to-do" list for my '04 V8 Limited. Great channel for us Gen 4 T4R guys. I admire your garage collection. My garage sports an S2000 and Ducati Monster.
Huge thanks. I just bought a 2005 4Runner and of course, the TPMS light is on. I'm not inclined to install new TPMS sensors with every tire change, which would be the only way to have a fairly reliable system. I'll keep good tires on it, look at them to see that one isn't obviously low, and check the pressures a couple of times a year. I'll probably wire a small switch in there and label it TPMS - ENABLE/DISABLE.
I did the same thing on my '05 about 4 years ago. Great quick fix. But shops can't do it for you because of regulations. This video should help others, Thx
Well that worked way to well. Blinky light GONE!!!! It was driving me crazy since I recently replaced tires, wheels and sensors and still the damn blinky light would not die.
Mine has been flashing at me for several months now. I refused to spend $$$ to make the sensors work again. Thanks for making this video. I'm going to try that first thing in the morning!
Thank you, I did this on my 2004 Toyota 4 runner & the light went out. At tire shop today salesman said it would be around $90 a wheel to replace & fix the TPMS . That’s $360 for all. I’m so happy to not ever have to deal with sensors again. Merry Christmas this is a big deal to me. Again thank you 🙏😊🎄
I have an 08 4Runner and mine doesn’t have a white and black wire.... I do see the pink and black tough.. any idea what other wire aside from white it might be?
Thank you for the video. Yes, this is a super simple fix, but if you don’t know what wires to pair, then who knows how long it’d take me? So glad to have the tpms light off.
my o8 4runner does not have a white wire with a black stripe at that connector , I'm ready to pull the cluster and pull whatever makes light happen on the dash .
I'll try this, but I'm wondering if there's a way I can reset the sensor... I got new wheels and the light is flashing for 30 sec and then goes solid. Can I reset the sensor before trying this?
NB I have an 2008 V8 limited. Wire color were Pink/Black and Black/Red. Found that on web www.toyota-4runner.org/4th-gen-t4rs/258209-2008-tpms-bypass.html It did the job!
If you connect those two wires temporarily will it reset the tpms? I really would like to keep my TPMS working so I'm wondering if I can just wire a momentary switch.
No. If you wire in a toggle switch (single pole single throw), when the switch is closed (on), the TPMS system will be off. When you switch it open (off), the TPMS will be on. You can route the switch up into the glovebox. You can toggle it when the car is running and it still works - but a momentary switch would do nothing here
@@CanadianGearhead I am quite sure. I thought maybe it didn't get through the insulation so I shaved back a little bit and put the splice back on, no go. You leave the plastic connector disconnected after splicing, or do you plug it back in? I tried both ways. Another video suggested a jumper on plug and leaving it undone but I haven't tried that yet
Doing this today, I got some limited rims from a 5th gen, I don’t do much off road driving and until I can get a lift I like how they look, Especially handles nice in the city and highway. But yesterday I went on a long drive and the light was blinking. Now I’m back home parked by my stock wheels and the light is off. I’m going to assume it will come on again when I go for any period of time so, I’m just gonna do this today and not have a light come on and make my heart sink cause I thought it was a check engine light at first haha 😂
Wow, your 4Runner is a twin of mine! What exhaust do you have? Seems that my tpms on the spare has gone out so my indicator light just flashes. Too bad I spent money to put new tpms on my new wheel/tire combo. Guess that was unnecessary because I'm not going to bother with the spare! Thanks for the video!
In this case you use a connector to join 2 of the wires to each other while everything remains connected. It might be a good idea to have someone with some automotive experience give you a hand.
@@1badEK Get one of those quick connects, one side of it has a hole all the way through and other side is not. Just drill other side all the way through like the other side, clamp the black and white and black and pink together
hey buddy I have a question, I wasnt sure where else to go honestly, like someone that would know for sure, on my 08' 4runner, 135k, yesterday my stock exhaust heat shield fell off, the one literally right above the exhaust, where the back seats are, not the manifold heat shield and I was wondering what I should do. re-bolt the old one or what would I use new?? There is a line of some sort also heat wrapped under there, I just want to make sure my exhaust doesn't overheat anything, you know?
If you can figure out a way to remount it, that's probably your best bet. I'm not sure if the heat shields make that drastic of a difference - I've had them fall off other vehicles before and I just left em. You might be able to order a new one from a parts store if you have to
@@CanadianGearhead thanks man, I'm probably gonna re-bolt it back on this weekend, Sunday and maybe go to the Toyota dealership and see if I can get a new one from them and I just don't want to go boom lol
I want to personally show this to the bloke at wheel works who was trying to sell me on their outrageous TPMS service who told me they “would never disable the light on the dash because it’s a huge liability” 😤
Hey man, I'm back again, I have another question, did your 4runner come with a factor spoiler? I'm asking because mine didn't and I got a factory wing for it and I was wondering if you had a video on how to do it or could make one possibly?? I can't find any online at all man
@@CanadianGearhead damm, your lucky, sorry for the questions 24/7, I've looked into it, i just cant find any videos on the factory spoiler installation, I just kind of recently got into modifying. y 4runner, I have spacers i need to put on, a trailer hitch and the wing
Just wait until you delete the fan clutch that will blow your mind on how many MPG will free up and powa. There is so much more we can do to improve our Runners but ppl are to hard headed when it comes to touch what the OEM has done.🤷🏽♂️
Might put a label in your vehicle to let the next owner know you disabled it. Also, they make TPMS computers that will program your ECU. I have one and it works like a charm on Hondas and Toyotas.
***NOTE*** Mine had a leaf also! Must be on omen from the Yota gawd himself... Amen! Took my spare out and the light came on because the system could no longer detect it... PIA
And it absolutely sucks how being one of the early versions of tpms, it doesn’t let you know which tire it is. You just know ONE or a few of them are low, in my case it’s probably my damn spare tire which I have to de rust the chain and completely do away with lol
Actually if it’s more than one the light stays on solid and when it’s only one it will blink lol. I know this because after 7years of blinking another one of mine finally died and now it’s solid.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
13 years of staring at the stupid tpms light. GONE in 60 seconds. thank you so much for putting this out here 👍🏻
I ordered 5 TPMS's (including the one for the spare) from AMZ for about $45 and had them installed in Costco Tire Center for $70. They have been working well on my 05 SR5 for 6 years as of today. Will try this trick next time when needed. Great video
You're my go-to channel for 4Runner stuff. You seem to hit all the things that we must all run into. Thanks!
Thanks for watching!
I wanted to personally thanks you. Took all of less than -0 minutes. The hardest part was taking some of the tape off the wire. Very easy to do. Dealership gave me an estimate of 430. Cost me zero. I had everything in and electrical tool box. Thanks again
That's great to hear!!
Thank you for posting this. I have a 2004 that needed a new TPMS in the spare and two rear tires. I was quoted $300 to replace all five sensors. The splice connector on the two wires worked perfectly. Thanks for sharing
Thanks for posting this, worked on my 05 Limited. No more distraction from the flashing light.
My kinda guy. Ditch the unnecessary. Tried tested and worked perfect! Thanks!
Dude, you so totally rock! THANK YOU for this amazingly simple fix that now saves me from having to keep replacing these stupid sensors on my 2004 SR5 V8 T4R at $90 a pop.
It worked!! Thank you for the video...wish I saw this 4 years ago!!
Wow! That easy, goes on today's "to-do" list for my '04 V8 Limited. Great channel for us Gen 4 T4R guys. I admire your garage collection. My garage sports an S2000 and Ducati Monster.
Sounds like a great pair!
Thanks for this video! I was planning on installing bigger tires on my 07' 4runner and didn't want to have to replace those stupid TMPS!
Huge thanks. I just bought a 2005 4Runner and of course, the TPMS light is on. I'm not inclined to install new TPMS sensors with every tire change, which would be the only way to have a fairly reliable system. I'll keep good tires on it, look at them to see that one isn't obviously low, and check the pressures a couple of times a year.
I'll probably wire a small switch in there and label it TPMS - ENABLE/DISABLE.
Just did this and it worked perfectly!! I also had a leaf up under that panel😂😂
I put those leaves there.
I also had a leaf up under that panel 😂
Leaf here too
I did the same thing on my '05 about 4 years ago. Great quick fix. But shops can't do it for you because of regulations. This video should help others, Thx
So... what was that red plastic part called? Jump connector? I spent 5 min on amazon looking, and couldn't find it. 🙂
Was looking just now, can't find this either. Should be in the description, but it is many years later at this point. 🤣🤣🤣
found it. they're called "wire taps". pretty cheap.
Well that worked way to well. Blinky light GONE!!!!
It was driving me crazy since I recently replaced tires, wheels and sensors and still the damn blinky light would not die.
Leaf probably came from the cabin air filter. lol thanks great video!
FYI, on my 08 sr5 it was the pink/black and red/black, took me a while to figure that out. After you short those wires the light will never turn on.
Excellent…..just did mine and directions are spot on.
My 2008 has different colored wires and I'm not sure which ones to jump
update: pink w/ black strip and black w/ red strip worked
Mine has been flashing at me for several months now. I refused to spend $$$ to make the sensors work again. Thanks for making this video. I'm going to try that first thing in the morning!
Do a step by step video how to bypass the tpms sensor delete please. Some of us didn't quite catch what you trying to explain
So yeah just did this, Was super easy even for me lol, Worked flawless.
You can get these at Canadian tire also
Thanks for your time.
Awesome 4Runner too.
Thank you for making a straight to the point video about it! Does it matter what size connector I use? Or do you know what gauge wire it is?
I think as long as the size is close enough it'll work fine
Thank you, I did this on my 2004 Toyota 4 runner & the light went out. At tire shop today salesman said it would be around $90 a wheel to replace & fix the TPMS . That’s $360 for all. I’m so happy to not ever have to deal with sensors again. Merry Christmas this is a big deal to me. Again thank you 🙏😊🎄
So glad it helped you, Merry Christmas!!
I have a 2008 V8 Limited and it was the pink/black and black/maroon.
Good to know!
I tried this my 07 4Runner and it didn't work
worked like a charm! thank you.
I have an 08 4Runner and mine doesn’t have a white and black wire.... I do see the pink and black tough.. any idea what other wire aside from white it might be?
I am also trying to do the same I found out on other forms its pink and black black and maroon Maybe that helps out your question
My dude! You da man! 👍
Thanks for the video .. does this method works for the toyota corolla 2008 ?
God bless you! Sheesh easy peazy no more light! Thank you! 💯😎😊
thanks! this was helpful.
Do you know if the wire colors are the same on V6 vs V8 models? Thanks for all great content!
Thank you! Super easy fix!
Helpful. Nice SW!
Thank you for the video. Yes, this is a super simple fix, but if you don’t know what wires to pair, then who knows how long it’d take me? So glad to have the tpms light off.
my o8 4runner does not have a white wire with a black stripe at that connector , I'm ready to pull the cluster and pull whatever makes light happen on the dash .
red and black
@@mason5540black wire w/ red strip right?
Mines been on and off the past month, turns out my tire was leaky. I really do need an idiot light.
Hey! Can you make a DIY video of rear hatch release?
I seen one guy do it on a 5gen. Not sure if you’ve made one already
What’s the red piece that splices the wires called?
When you say jump em together, should I cut both wires and join them together? I wish you had posted the actual video of you performing the fix!!
Seriously? Thanks a ton. That light has been on for two years.
I need to try this on my '08 JF Cruiser 😊
What's the wheel setup getting ready to lift mine
I'll try this, but I'm wondering if there's a way I can reset the sensor... I got new wheels and the light is flashing for 30 sec and then goes solid. Can I reset the sensor before trying this?
Do you connect them on both sides of the red clip? Or just the white one? Love the videos
What tire size are those?
How many miles you at. My 06 4Runner 4.7 limited just hit 333,333.
Will the 2006 sequoia be the same color wires? I have the brown box.
Ty so much. On my to do list
Even if the TPMS is still installed in each tire it’s still ok to do this? Plus what exactly does jumping mean? Just connecting the wires together?
Yup, doesn't matter if you have sensors or not. Just connect the 2 wires together
@@CanadianGearhead Thank you sir.....
ok, going outside now to do this! thanks dude!
NB I have an 2008 V8 limited. Wire color were Pink/Black and Black/Red. Found that on web www.toyota-4runner.org/4th-gen-t4rs/258209-2008-tpms-bypass.html
It did the job!
Thank you!!
Is this permanent or can it be reversed if the next owner wants the tpms
What do you mean jump them together ? Does this mean connect those 4 wires together ?
@Canadian Gearhead : Is the jumper clamp removable if I want to reverse the modification? Let’s say I’d like to use the sensors again at some point.
Yeah you can just take it off
Hey Gus this don’t work on my 4Runner. Any tips? Please
I got up this morning thinking: Man, what my car really needs is more geegaw electronics.
Where did you learn which wire was which?
I would like to know where to look as well. I have a 2015 Camry and can't figure it out lol.
Thanks
If you connect those two wires temporarily will it reset the tpms? I really would like to keep my TPMS working so I'm wondering if I can just wire a momentary switch.
No. If you wire in a toggle switch (single pole single throw), when the switch is closed (on), the TPMS system will be off. When you switch it open (off), the TPMS will be on. You can route the switch up into the glovebox. You can toggle it when the car is running and it still works - but a momentary switch would do nothing here
Perfect
this isn't working on mine for some reason. 2007 V8. tire light is solid, not blinking but it didn't change after the splice. Any thoughts?
That's odd. Are you sure you connected the proper wires?
@@CanadianGearhead I am quite sure. I thought maybe it didn't get through the insulation so I shaved back a little bit and put the splice back on, no go. You leave the plastic connector disconnected after splicing, or do you plug it back in? I tried both ways. Another video suggested a jumper on plug and leaving it undone but I haven't tried that yet
Need to find this fix for a 2017 Tacoma.
Doing this today, I got some limited rims from a 5th gen, I don’t do much off road driving and until I can get a lift I like how they look, Especially handles nice in the city and highway.
But yesterday I went on a long drive and the light was blinking. Now I’m back home parked by my stock wheels and the light is off.
I’m going to assume it will come on again when I go for any period of time so, I’m just gonna do this today and not have a light come on and make my heart sink cause I thought it was a check engine light at first haha 😂
Wow, your 4Runner is a twin of mine! What exhaust do you have? Seems that my tpms on the spare has gone out so my indicator light just flashes. Too bad I spent money to put new tpms on my new wheel/tire combo. Guess that was unnecessary because I'm not going to bother with the spare! Thanks for the video!
It's a Gibson exhaust
@@CanadianGearhead no way! I just got the same one! Thought the exhaust tip looked familiar. 😎 How do you like it? Getting ready to install mine.
@@drivemyexotic5274 I love it, bit of drone on the highway but it sounds great 👍
@@CanadianGearhead awesome, can't wait.
Thank you for this I’m tired of staring at this light on my 04 limited
What do you mean by “jump them together”? I have that pesky light on my dash and it’s annoying. Please explain. Thanks.
Connect them
Aren’t they both already connected? Sorry to sound like a dummy. Do you cut them and reconnect them? Is it going 2 in 1?
In this case you use a connector to join 2 of the wires to each other while everything remains connected. It might be a good idea to have someone with some automotive experience give you a hand.
Any clue about the grey box. I'm guessing it's 4wd related as I don't have a grey box and I have 2wd.
Not sure, we didn't get any 2wd ones up here
the tpms wire wires are right under the cabin filter, which should explain the leaf.
Would this work on the 2009 rav4 ??
Why is the sore connected called?
Do you have to cut one of those wires?
Nope, just jump them together
Do you jump them to the white/black or pink/black? So like only one plug into the harness or both wires still going to the harness?
@@1badEK Get one of those quick connects, one side of it has a hole all the way through and other side is not. Just drill other side all the way through like the other side, clamp the black and white and black and pink together
@@1badEK 2 plugs still going into the harness
Not finding a white/black in my module... 2008 4Runner SR5 V6
hey buddy I have a question, I wasnt sure where else to go honestly, like someone that would know for sure, on my 08' 4runner, 135k, yesterday my stock exhaust heat shield fell off, the one literally right above the exhaust, where the back seats are, not the manifold heat shield and I was wondering what I should do. re-bolt the old one or what would I use new?? There is a line of some sort also heat wrapped under there, I just want to make sure my exhaust doesn't overheat anything, you know?
If you can figure out a way to remount it, that's probably your best bet. I'm not sure if the heat shields make that drastic of a difference - I've had them fall off other vehicles before and I just left em. You might be able to order a new one from a parts store if you have to
@@CanadianGearhead thanks man, I'm probably gonna re-bolt it back on this weekend, Sunday and maybe go to the Toyota dealership and see if I can get a new one from them and I just don't want to go boom lol
Hero.
What size tires do you have?
285/70/17
@@CanadianGearhead brand of the tires?
Is the SW20 yours
Yup
I'm doing a 2GR swap in one for a friend and hopefully a 2.2 3SGTE or k in another
Omg thank you so much...
made my day!
Oh yeah! Thanks for this!! I will be doing this in 10min. Lol
Anyone know what else that module does? I have a 2003 and that module is missing and there is no wiring or plug for it. My TPMS light stays on.
Sounds like it's been removed, maybe someone thought that would disable it
Y para mazda 6???....q colores puentear????
Dude I get 23 to 26 MPG on my 1gr.
I have no problems sharing my findings if you interested!
What findings?
I want to personally show this to the bloke at wheel works who was trying to sell me on their outrageous TPMS service who told me they “would never disable the light on the dash because it’s a huge liability” 😤
That’s true. It’s a federal law against disabling.
Hey man, I'm back again, I have another question, did your 4runner come with a factor spoiler? I'm asking because mine didn't and I got a factory wing for it and I was wondering if you had a video on how to do it or could make one possibly?? I can't find any online at all man
Sorry dude, mine came from the factory with one
@@CanadianGearhead damm, your lucky, sorry for the questions 24/7, I've looked into it, i just cant find any videos on the factory spoiler installation, I just kind of recently got into modifying. y 4runner, I have spacers i need to put on, a trailer hitch and the wing
I did exactly the same, double and triple check the wires but didn’t work. :(
I actually just did the tpms delete mod this last weekend on my 05 and the entire compartment under the glove box was full of leaves!!
Haha it's mind boggling
The blower/cabin filter is right above it that's why!
It sure beats spending $300 to fix a warning light that’s just going to annoy the crap out of you.
Just wait until you delete the fan clutch that will blow your mind on how many MPG will free up and powa.
There is so much more we can do to improve our Runners but ppl are to hard headed when it comes to touch what the OEM has done.🤷🏽♂️
Soooooo, please explain.
@@sonerogarcia
Explain what!
Research it or I can give you a link to electric fans shrouds done by a company on PA for fan clutch delete.
Might put a label in your vehicle to let the next owner know you disabled it. Also, they make TPMS computers that will program your ECU. I have one and it works like a charm on Hondas and Toyotas.
Please explain how thanks. I have a 2015 Camry that I refuse to buy sensors for my winter wheels.
thankyou!
So I did this and 100 miles later the light came back on. Anyone have this happen?
***NOTE*** Mine had a leaf also! Must be on omen from the Yota gawd himself...
Amen! Took my spare out and the light came on because the system could no longer detect it... PIA
Now if you knew how to get that flashing OFF on the dash after removing the rear air suspension.... no matter what it will never turn off.
Accept the OFF light. Embrace the OFF light. Love the OFF light.
Scotch Loc
And it absolutely sucks how being one of the early versions of tpms, it doesn’t let you know which tire it is. You just know ONE or a few of them are low, in my case it’s probably my damn spare tire which I have to de rust the chain and completely do away with lol
So true
Actually if it’s more than one the light stays on solid and when it’s only one it will blink lol. I know this because after 7years of blinking another one of mine finally died and now it’s solid.
I’m tired of that too
Do not do this on an 08 4runner.
Why?