The print shop printed these off for me today can’t wait to build this bigger motor I think and looking forward to flying it , great job guys many many thanks 🙏
I say YES! to floats ! Probably a little bit tricky on water, maybe requires a bigger engine? I would appreciate skis also but snow is rare in your place judging by the nature . This Cessna is a little big monument, one kind of The aircraft ! Slow and calm flight. What kind of bird could you build to reach slowest speed ? Bushplane STOL style. Huge flaps, slats, .. Here a little list of aircrafts I like and maybe someone you would like to make : Fouga magister Super Etendard Beechcraft King Air 200 Antonov AN-2 Couzinet Arc-en-ciel (Aéropostale figure) Carreidas from vol 714 Tintin Porco Rosso airplane Too many... Plus I already have several from your hangar on my wish list. Anyway I agree size matter, flight of bigger model are easier to do realistic. Have a good day!
An excellent build. Looks and flies so great. The Cessna L19 Bird Dog has been used to tow sailplanes/gliders because it has excellent short field capability and great pilot visibility. Adding a tow hook so can tow a scale glider might be fun?
Klo boleh bisikin harga dong. Biar yg kpgin hobby mainan kygini, tp gk punya basic ilmu aeromodelling ky gua bisa tercover. Lumayanlah..buat mengusir penat
information 9:57 the mass of the wing-located servos Should be located Forward of the main spar/30% of chord. CF should NEVER be your 1st choice.!!! cf is HEAVIER than the 'same amount' of wood (such as pine/poplar/spruce). the use of cf for the half-main spars has resulted in there being a greater amount of outboard-located mass in the main wing. you may know that such outboard-located mass tends to adversely affect roll-axis stability. d
Hello Juluis, how can I print the bird dog so that the wingspan of the wing is more or less 1.20 cm? How much should I scale down my printer? I need it to work with a 1400kv motor Greetings from Chile my friend
It called by many names, but the material somewhat similar or the same, all are XPS foam. Names of many countries : Depron foam, foam board, polyfoam, dollar tree foam, blue foam, etc
All fans of aircraft modeling, I have such a question, if this model was assembled with the function of manufactured flaps, then why were they not used on takeoff and landing? So the model is beautiful, and I want to assemble it too, and I will try to do it like Sky Arrow, which I am happy with now. 👍 This is the second Sky Arrow model, slightly modified, I changed the design of the wing and, as on the first model, I closed it when I was shooting a flight video, I used flaps during takeoff and landing. ruclips.net/video/jfD389c28FQ/видео.html
It's art to me. You just fly them. You are a wizard in shape & form.
My All time favorite of Aeromodelling enthusiasts is Sir Julius Perdana, God Almighty Bless you Sir, Many Thanks Sir
Many thanks!
You have a skill set that's second to none. Your work is amazing!
Thank you so much 😀
@@JuliusPerdana Enjoy all your videos and recommended to friends.
Great job my friend! The "Bird Dog" has always been one of my favorite planes......thanks for sharing!
Thanks for watching!
The print shop printed these off for me today can’t wait to build this bigger motor I think and looking forward to flying it , great job guys many many thanks 🙏
Have fun!
Congratulations Julius beautiful model and excellent the idea of building models with a wingspan of 2000mm.
Once more a little piece of art, looks nice in the air. Well done Sir . Take care.
Thanks, will do!
Can’t wait to build this thanks 🙏 Julius
Beautiful huge airplane! You are my hero. Thanks for all the tips about building.
Thank you very much!
What a wonderful model airplane Julius, thank you for contemplating us with this masterpiece
My pleasure!
Excelente Julius. Hice el Phantom, y vuela muy bien. Muchas Gracias por tu contribución al hobby
Been waiting on this one for long time. Thank you Master Julius .
Congratulations Julius for the excellent works
Thank you so much 😀
Julius the champ 🏆❤❤❤❤
wonderful video, thank you very much for all the plans available for download on your website
Glad you like them!
This guy is my hero
thanks mate, I just found it very relaxing watching one of your video, Hawaii is so beautiful
@@JuliusPerdana Thanks Julius!
Excelente tú eres el mejor desde coatzintla Veracruz México 🇲🇽 Saludos
Just want to said you are true master jedi great mind learn different ways and easy to build from scratch thankyou for sharing your knowledge
I appreciate that!
Very good looking airplane.
As an old aeromedeller I am torn. Respect and love the passion and work ... but but ...
Love your passion.
I appreciate that!
Good job, julius. Thank you
Thank you too!
Lovely model, good flyer , well done Julius
Once again congratulations.. beautiful plane and very nice flight characteristics.
I say YES! to floats ! Probably a little bit tricky on water, maybe requires a bigger engine?
I would appreciate skis also but snow is rare in your place judging by the nature .
This Cessna is a little big monument, one kind of The aircraft ! Slow and calm flight.
What kind of bird could you build to reach slowest speed ? Bushplane STOL style. Huge flaps, slats, ..
Here a little list of aircrafts I like and maybe someone you would like to make :
Fouga magister
Super Etendard
Beechcraft King Air 200
Antonov AN-2
Couzinet Arc-en-ciel (Aéropostale figure)
Carreidas from vol 714 Tintin
Porco Rosso airplane
Too many...
Plus I already have several from your hangar on my wish list.
Anyway I agree size matter, flight of bigger model are easier to do realistic.
Have a good day!
Thank you brother...
I was waiting for this plane🥰❣️🥰❣️❣️🥰
And i am waiting f22😊
This plane is really cool, good job as always!
Thanks a lot!
Nice design. Very scale looking. Thanks.
hebat la julius.. hari hari aku tengok video kau.. seronok haha..
Você é muito bom parabens.
Another great build🤩
Great work .Thanks
Thank you too!
Show de bola obrigado por fornecer a planta amigo vc é um ótimo professor 🎉🎉🎉 e um ótimo construtor
I already gave the like to strengthen the channel, I really like your videos and I always watch them
Awesome thank you!
Waiting for this plane ❤
Looks great! I cant keep up!
Really u r clever amateur ever had seen ..
Greetings
Beautiful ❤️
Thank you! 😊
Show, obrigado.
nice build
An excellent build. Looks and flies so great.
The Cessna L19 Bird Dog has been used to tow sailplanes/gliders because it has excellent short field capability and great pilot visibility. Adding a tow hook so can tow a scale glider might be fun?
Cool, thanks
Klo boleh bisikin harga dong. Biar yg kpgin hobby mainan kygini, tp gk punya basic ilmu aeromodelling ky gua bisa tercover. Lumayanlah..buat mengusir penat
And good job bro
Nice job!
Thanks!
Perfect, can you try build Bellanca Decathlon about 2,7 m ?
Mantapppp❤❤❤
❤nice❤
Parabéns pelo trabalho ❤
Siempre bueno hermano.
Me gustaría hacerla como hice la Cessna 172
Very nice brother❤❤❤
Julius friend you have the gun project of a jet carrying a 64mm edf thanks and greetings from colombia
Next video, pls make Yak-130 plane
information 9:57 the mass of the wing-located servos Should be located Forward of the main spar/30% of chord. CF should NEVER be your 1st choice.!!! cf is HEAVIER than the 'same amount' of wood (such as pine/poplar/spruce). the use of cf for the half-main spars has resulted in there being a greater amount of outboard-located mass in the main wing. you may know that such outboard-located mass tends to adversely affect roll-axis stability. d
thanks man
Request to EMB A-29 Super tsukarno please!
Om. Klo mau buat atau beli yg recomended dmna om.? Buat pemula. Atau pnya om ada yg dh bosan dan mau d lelang om
Do you think this could be built with balsa wood with a petrol engine?
very good lob, any projets in mind? I always love to see comercial rc planes, just for ideas
already see this? ruclips.net/video/1UNPBzaCSI4/видео.html I also made DC-3
Sy ada dinamo dan part serta remot 2 ch.....wingspan yg ideal brp cm ya pak
good job!
odebu na kawaii body mo aruto😅🙏
Hi Julius, how is the mid wing attached to the fuselage?
Hi Julius, how is the wing dihedral established?
Dear Julius, if I make this plane down to scale 50%, with 1m wingspan, how it will effect performances of this airplane?
you should make it in 120 cm wingspan, the same size as my Cessna 172, it will fly the same
@@JuliusPerdana Thank you
can i make it smaller by printing on A1?
When is the uboat?
still need some testing
Hello Juluis, how can I print the bird dog so that the wingspan of the wing is more or less 1.20 cm?
How much should I scale down my printer?
I need it to work with a 1400kv motor
Greetings from Chile my friend
print in 60% size
@@JuliusPerdana thanks 😊
hey jullius produced by turkey
Can you build Bayraktar Akıncı drone, I'm sure it will be a great project
Can this model be a good choice for beginners?
I imagine so due to the high wing?
in term of easy flying yes, but for the weight and cost, it's not for beginner. Try to build Cessna 172, you can find it also in my channel, or Wilga
@@JuliusPerdana tks!
There is no W16 part on the plans
Hi Julius, could provide a sketch for w16. Thanks
W16 is just a rectangle with this dimension = 2 x 44.5 cm or 0.8" x 17.5"
@@JuliusPerdana thank you!
But how you transport them. Take off the wing?
yes, check the plans
@@JuliusPerdana this wood/metal brace are holding the wing. I can take off the wing without it? That's how i understand it
@@hubert9283 it secured by 2 screws on the plywood base on fuselage (look for build instruction)
@@JuliusPerdana so i think correct. Appreciate your work
Is it practical to use balsa wood instead of plywood?
If you can use balsa the better it will be
@@JuliusPerdana thank you!
How do i get plans please ,nice build
check description
Oh ok, didn't see at start, thanks
why dont you create kits and sell them . I would for one be very interested to buy them.
precut kits, like Flitest did?
@@JuliusPerdana yes!!!
I still don't have electronics for this...😢
Hi how are you doing what type of fome do I use because I want to make a spitfire
It called by many names, but the material somewhat similar or the same, all are XPS foam. Names of many countries : Depron foam, foam board, polyfoam, dollar tree foam, blue foam, etc
@JuliusPerdana okay I will have a look here, do you have tips for beginners
All fans of aircraft modeling, I have such a question, if this model was assembled with the function of manufactured flaps, then why were they not used on takeoff and landing? So the model is beautiful, and I want to assemble it too, and I will try to do it like Sky Arrow, which I am happy with now. 👍
This is the second Sky Arrow model, slightly modified, I changed the design of the wing and, as on the first model, I closed it when I was shooting a flight video, I used flaps during takeoff and landing.
ruclips.net/video/jfD389c28FQ/видео.html
Because I'm not familiar of using flap, it still manageable without it
I already know it...next time you will build a plane to accomodate a kid and then one larger to accomodate an adult 😀
lol
dari cibubur bang?
Kadang2 aja, cuma numpang lapangan
can you make a rc airliner in ramy rc channel
The last time I build RC airliner and fly was Boeing 737-300 check them out on my channel, I also build 747 but was not flying yet and a DC-3
Hi Julian, I can’t locate the plan for w16
the wing supporting strut?
@@JuliusPerdana yes
@@frankm7190 dimensions is 2 x 44.5 cm
@@JuliusPerdana thank you Julius
Bang jual gak unitnya yang RTF??
ngga, ga ada waktu buat bikin utk dijual
Mas mau nanya.. Ada nomer ada akun medais mas yg bisa di hubungi, untuk pemesanan rc plane
saya tidak melayani pesanan mas, hanya bikin untuk RUclips aja
Chow
Pak bahannya pake apa
polyfoam
My Friend, you F######Ked Up making plane hahahaha, I am pro, I enjoyed the process and you really suck at making planes, but still good job hahahaha.
good for you mate, thanks for watching my F######Ked Up model
Bang tokopedianya apa?
Saya ga jualan