Would you be able to make a video going through your selection of tires for 1/8 buggy? How you decide the compound and tire you pick for the conditions.
Watching tour thread trying to get backbinto running vars after 20 years. Do you glue both sides or just the outside? Sorry if it is a stupid question.
Had the same problem now I use a glue activator. The activator I’m using is call Mitreapel awesome The cure time is 1 minute and it ready to race. It stopped the cracking
Thanks for all of the great tips. I'm old enough to remember when the fast guys weren't very helpful.
Would you be able to make a video going through your selection of tires for 1/8 buggy? How you decide the compound and tire you pick for the conditions.
Different world with youtube, back in the day the oldschool dudes kept the secrects locked away like launch codes for nukes. Thanks for the tips
Good tip
I will give this a try. Before I do can I check with you if you glue both the outside and inside walls with the method you have shown us?
Watching tour thread trying to get backbinto running vars after 20 years. Do you glue both sides or just the outside? Sorry if it is a stupid question.
Thanks for the video Spencer! Will doing this help for 2wd astro front tires like Cut Stagger too?
Could you get a similar benefit by running VTR/60mm front wheels which have lower side walls?
May try this with an older set of short course tires since I feel traction rolling due to tire fold/body roll is most apparent in that class.
Speed tip drive faster lol 😆😂. Great video spencer 👍👍
New FT thin glue ?
Would this work on oval carpet. Race slash street stock on rpm revolvers and proline primes
Does this apply for carpet the same ?
Great tip Spencer
Thanks for the tip 👍😀
Mmm, I've been almost there then with my messy tyre gluing....... I must be pro too. Lol. Cheers Spencer.
what about glue on the edge of the tread above lettering to make the car push a little :D
Great vid, Spencer. Gunna try this out tomorrow at HA. 🤙
Just take it easy man.
@@shaun4298 Hi! I'm Mike... I dont think we've met. Hehe
Hey Spencer how
Do I fix the white residue on tyres without ruining tyre
Not sure if you’ve found an answer on this, but if you get a heat gun and run it over the tire it will get rid of it 👍
Used to do this a lot when racing on astroturf, but for some reason they banned it a couple of years back from the UK nationals and regionals🤷♂️
What about 1/8 scale buggy?
After 1 run it seams like the glue cracks and goes away? Do you re apply every run?
Had the same problem now I use a glue activator. The activator I’m using is call Mitreapel awesome
The cure time is 1 minute and it ready to race. It stopped the cracking
Where the side walls already glued in your video?
Clay or carpet?