Rebuilding A Flooded $2,000,000 McLaren P1 | Part 8
HTML-код
- Опубликовано: 17 авг 2023
- Use my link to get up to 37% off!► displate.com/tavarish
Thanks to Displate for sponsoring this video!
--------------------------------------------------------------------
Goodwood P1 LM clip used: • £3M McLaren P1 LM's Re...
--------------------------------------------------------------------
Subscribe! ►bit.ly/2xZGtYN
Instagram ► / therealtavarish
Tavarish Shirts and Merch! ►bit.ly/shoptavarish
--------------------------------------------------------------------
Thanks to the companies that support this channel!
Valvoline - The Original Motor Oil►www.valvoline.com/
Find your dream car on AutoTempest!►bit.ly/foundonautotempest
--------------------------------------------------------------------
Questions? Comments? Business inquiries? Email me at asktavarish@gmail.com
--------------------------------------------------------------------
My Equipment:
Simiron Epoxy Floor Coating►simiron.com
Bendpak Lifts and Equipment►bendpak.com
--------------------------------------------------------------------
Music used in this video:
NIVIRO - You [NCS Release]► • NIVIRO - You | Future ...
Malik Bash - Ghosts [NCS Release]► • Malik Bash - Ghosts [N... - Авто/Мото
Use my link to get up to 37% off!► displate.com/tavarish
Thanks to Displate for sponsoring this video!
How do you afford to keep all these cars registered?
It would’ve been sick if you got forged carbon
What happened to the DDE Lamborghini that you bought?
Looking at the weak rods, bearings and crankshaft, didn't your McLaren 675LT engine blow up because it was a little too powerful for weak rods to handle? I don't know if this was done by intentional design to create an eventual engine failure on the P1, but this sure looks like it. I mean, most billionaires can just buy another P1 no problem but I'm starting to see a pattern here. A lot of components were outsourced such as EMP Intercooler pump or a Mercedes emblem on a Bosch Maps, and signs of wear and tear that looks like the car did more than 300 miles, and an engine with weak rods that would have eventually failed. Is a factory P1 really worth 2 million? Thanks for the upload, I'm enjoying your rebuild series.
100k in an hour....damnnn
rewatching this series is my whole weekend plan
Oh Hey RUclips.
You have forgotten to log out from your corporate account!
Yo youtube I've been seeing you everywhere
Ayo?
hold up
As someone who does carbon fiber projects as a hobby; the frame doctor is a magician.
must admit it looks really good only cfc i have is a real carbon fibre car key lol
All because of a lazy tow truck driver 🤬
Fucking awesome! Thought the same
Is that structure of the carbon not compromised ? .. Coming from the world of Mountain Biking where I have snapped a lot I would need some convincing to go 250mph in a repaired frame..
I’m sure I’m wrong
Please leave it exposed
The astronomical amount of work that's going into rescuing this piece of automotive artwork is jaw dropping.
It's a piece of crap 😂
@@dillanyssel7424ot will be dangerous to use it on high speed when you know that it was selvaged.
I would not drive this thing even if they would got it running..
@@budadi I also do.
@@budadi I do not even yo buy a car with replaced after accident airbags. I better pay older car but without accidents.
This car was under water. It causes a future problems
Without videos like yours, we would have never been able to see a P1 engine from the inside, and how disappointing it is. Great series, this has been quite the journey!
I completely understand how busy Tav must be AND how insane this project is BUT .. these once a month videos are killing my soul haha I desperately want to see progress cause this project is absolutely IN-SANE.
Can't wait to see the next one :D
Amen
Amin
For reals, we were on a nice once a week drop and than wth!
How does your comment get so many likes?
He waits for someone to sponsor video then he uploads I think.
We can't wait to see the pieces come together.. Especially the rear clamshell! Had a blast working with you guys 🏁
Been looking at buying parts from you guys for months! Never knew if you were truly legit until watching the last episode. I’ll be in touch soon!
Hey bro you got some good stock of amazing parts thanks for being part of the project and helping tavarish 👍🏻
Guys you have absolutely knocked this out of the park. I’m in disbelief of how flawless that carbon is, and accurate to seemingly drop onto the top of the car. Incredible work!!
Me too this is insane!@@navnoot
Really looked clean when it went in! Super amazing work
“I don't like sand. It's coarse and rough and irritating... and it gets EVERYWHERE” - Anakin Skywalker
That's a very professional carbon repair. People underestimate how difficult this is to repair. Great job 👌
That carbon work is so good, I'd trust him to make a submersible.
i recommend not using a wireless controller
I would also use something that isnt carbon
Maybe we can add a titanium plate around it for added rigidity
Carbon is shomting what will get weaker every time you go to the titanic
😂🤣😂🤣😂
I'm not really a car guy, but I am an engineer, and I have to say I've enjoyed this series and all the others, largely due to the energy and enthusiasm Tavarish puts into these videos. There's something about taking something in poor shape and bringing it back to life.
Dude, get a nice American car with a V8 and a manual transmission. Then you will become a car guy! I have a GT350 with 525hp and it is so much fun to drive.
@@blakerh Nice! My first car was a 79 Camaro, back in the 90s, I bought for $1200. The thing made a lot of noise and I did a lot of questionable things in it. It also came with a hole in the floor board, a lot of rust, an oil leak, and a chip in the flywheel that made it impossible to start without taking a socket and turning the motor by hand, if it landed on the chip. It was a lot of fun, and my dad always pushed me to work on it myself.
Every engineer must let everybody else know they are an engineer. Kinda like vegans
I’m vegan 🌱 and an engineer 👨💻 😂
@@alexcrosse9970haha this is true idk why we like to say that
The carbon Repair was clean as fuck, one of the best I have ever seen!!! well done
This is one of my favorite rebuilds of all time! That carbon fiber work is insane! Hats off to the custom work and patching.
Finally new episode, can't wait to see it finished!
Hyped
Hell yeah!!
@@jhograesslit is a hypercar after all 😂
@@ratuldeoun7228 it Shure is xD
I’ve been waiting so eagerly for this!!?
Can we just talk about the enourmous BALLS that Joey, The Frame Doctor has?
a normal person would be shitting their pants when cutting into the carbon of a million dollar car yet he does it with such finnese... such confidence... you'd think all he does for a living in cut into p1's. We should all aspire to have the bravery of Joey
This got to be the biggest salvage attempt of a car the world has had the joy to see and we love that they even put it all on the line for us to be here commenting.
Big balls
That’s what a pro does. The job better than anyone else. When I hire somebody and ask them to do a specific thing and they’ll tell me that you can’t do that I instantly fire them and I move on. Nothing cannot be done it’s just that most people do not have the skills to do it.
Because that is his job LOL
@@ScooterDoge id show them how to do it then tell them to get the kettle on and fire them if they make a shit cup of tea.
its already broken, what could he do to make it worse?
For as expensive this project is I would have expected more videos to help offset the cost
Alright, I think we have all been patient enough now so I’ll just ask, when is the next update coming out? 😅
The amount of unsung skilled workers you are highlighting in this project is amazing. Wholesome content
not to mention, sung unskilled workers
All of these unsung skilled workers plus the guys in Florida would have done a lot better putting that $500,000 engine together when it was new.
Those crank bearing scores were eye openers. Pencil thin rods. Why would you buy a new McClaren?
@@lezivanerrol3697someone with more money than sense lol.
In the owners manual for one of their cars they tell you not to leave it out in the rain as it will damage the knock sensor.🤷🏻♂️😂😂
I’m not a car person but I absolutely love this series. A good chunk of people over the world are cheering you on, me included!
Same here. Very interesting series.
I'm with you - I don't care at all about cars, but I care about this one.
Exotic Car Gear did the carbon fiber hood for my 2011 V12 Vantage and the product was perfection!!! Customer service was impeccable.
I'm so grateful I got to watch 8 episodes in a row, now I can't wait for part 9
man i love how you’re giving so much credit where it’s due. The body panel makers, the carbon fiber patcher guy, the engine rebuilders at cannonball garage, and of course.. your wonderful crew too!
They’re all amazing craftsmen and artists!!!
Of course, without low-key sponsorship like that he'd be screwed
As a recent graduate of an aircraft structures course that had composite classes, I am amazed at that composite work, especially upside down trying to step scarf a joint. And yes the tap test is perfectly valid, used on all aircraft around the world daily.
Great episode! Truly remarkable people working on this car. The frame doctor's workmanship looked class!
Tbh the yellow hood looks good with the Carbon fibre it’s like a 1 of 1 bumblebee spec but I can’t wait to see the final production of this rebuild
Tavarish has a gift for bringing people together. By the time this project is done, half of the car industry would have been involved. Kudos man i need to see this thing on the road
They going to have gordon murray himself involved
he goes in humble. asks for help... you can't say no
And now Jay leno!
I love when new episodes of this come out, the p1 and tav is a lethal combination on god
on god no cap
Yes, yes they are. 👍
for real for real@@ksuscttmrrs
@@ksuscttmrrsthe fact that this has a translate option should tell you everything about our generation
Especially considering god doesn't exist
You really need to upload more videos man
Loving your series. I saw this car in Naples, so seeing it come back is awesome. As a home owner who had 7’ of water go through their house on Sanibel Island, I know first hand the amount of destruction the saltwater and ocean muck did. Insurance companies think you can just clean it with aggressive cleaning and pressure washing. I have had to completely remove everything down to the raw concrete block exterior walls from my house because of the muck and you taking apart this engine, 100% shows what the water and muck did.. so if it gets into every part of an engine just imagine an entire house. Thanks for giving me a break from the horror of rebuilding, dealing with contractors and the worst people on the face of the earth.. Insurance companies!!! Love the rebuild and can’t wait to see it running again.
Would you rather rebuild without having had insurance? I doubt it!
@@stupidas9466 what insurance company do you work for? Anyone that thinks they actually help people probably work for them. When you walk in another man’s shoes you can comment… otherwise shut the f’ up..
Jack and Rex are huge assets to the channel, the camaraderie is strong.
You should have named it. T1. You had the F1 than it’s predecessor P1 and now the T1. Tavarish 1. “The One”…
No.
I like the play on words, such a clever use. Dude great idea!
Yes, go for it. T1 beautiful
Sounds tacky. Plus that'd resemble/confuse with Gordon Murray's t50
literally how on earth
@@NotUrDJ
Watching a true expert like Joey doing his work is just inspirational. What a craftsman.
My friend worked for Mclaren doing crazy hours building the CF panels. They are round the corner from me. Great uploads. Thanks ❤
Joeys carbon fibre repairs are AMAZING. He does excellent work.
You and Matt are currently the best on RUclips! I love seeing the P1 come together. That carbon fiber body kit is so beautiful!
Man, Joey is a magician! That looks factory.
This channel is great. Thank you. Just watched your "Cant do this anymore" video and it really resonated with me. Always ask for help in your darkest time. I know how hopeless it can feel at times but a permanent solution to a treatable and temporary problem is not the answer. Your videos help others cope that are going through similar circumstances. Feed off that energy and know you are serving a significant purpose.
You more than an earned a new sub!
Just finished binge-watching from Episode 1 and the transformation has been INSANE! Tavarish, you're a legend in the car community. Who else agrees that this series is the perfect mix of education and entertainment? 🔧
Transformation? It's literally stripped down do its bare bones. What transformation?
@@mementomori4972I mean it’s a P1 the fact it’s stripped to bare bones is something I’m pretty sure hasn’t been done on a p1.
Holding the elite car makers to quality is above and beyond, we love you man
McLarens are like the Teslas of the supercar world. I've seen more than a few videos showing numerous build quality issues. Not ok for a car in this price range. That's for sure.
@@emb647There's no denying it, that the fit and finish of a average hatchback is of a better quality than this, I mean, you wouldn't find a stack of square spacers fitted to level up the body panels🤦as was also the case with this McLaren.
@@emb647 let me tell you an even crazier thing. every McLaren engine up until this point is somewhat related to a Nissan. the R390 GT1. it's engine (VRH35L) had it's designs bought by McLaren. McLaren then handed those designs to Ricardo who then developed the M838T which is the engine found in the P1. the engine has some amazing engineering but it isn't a completely bespoke design and they still managed to make it cost half a million with weak links that should not exist on a car that pricey.
It's pretty insulting such an expensive car has weak piston rods and manufacturing debris left in the engine block to the point it damaged a bearing on pretty much the first run.
@@i64fanatici guess most buyers are not really auto addicted ppl just ppl with money that want to brag... or they may think these tbings are small stuff that can be overlooked... don't know, haven't bought one so i don't know the policies or maintenence. I just know a few ppl with money that buy stuff because they like them or they make them cool, and not because the know any better...
Sadly, the ppl tha know alot about the things they are interested in( cars, watches, etc) can't afford them because we are in E Eu 😂
The level of talent here supporting this is amazing; it’s the modern version of painting the Sistine Chapel.
This build feels like the epitome of SNAFU. Situation Normal, All F'd Up. And the quality of the people you've brought together to fix all the issues is impressive.
It’s always a good day when Freddie posts. What a great journey this has been. From the first Aston Martin vantage to this, it has been amazing
It's amazing how many likes you get, I'd like to know what makes so many different people like your comment.
Tavarish inspires me.. My parents said if i get 50K followers They'd buy me a professional camera for recording..begging u guys , literally
Begging...
@@Bossedupty10000ppl 🟫 👃 or 🍑 😘!
@@Bossedupty10000 I am just really happy that Freddie saw it tbh I don’t really care about other people
Don’t think people realise the overhead work by joey , That’s a master of his craft at work. Amazing, keep going T you’ll get there mate….. 🏴🏴🏴🏴🏴
I want Fred to take his time with this build especially with the engine tuning and power delivery i wouldn’t want it to blow up like his previous MCLaren 💯
Those Body pannel are pure art .
Protect those people .
Great video - I love that P1 ! - My former office is right across the street from our McLaren dealer, our front doors are literally 25 metres apart. So I have seen many dozens of McLarens come and go here in Vancouver. Back shortly after they came out, I recall a damaged McLaren that had been in a shunt with a car and received damage on a front corner. For a normal car, it looked like one that would be in and out of auto body shop in a day, but not the P1...A Carbon Fibre Fibre McLaren specialist was brought in to evaluate it, and I watched as he went over and around the damaged area tapping with a little hammer and listening to the sounds and making notes and felt pen marks on the car. His conclusion was it could be repaired, and I assume it was. How long it took? I imagine it was a while...
Please dont tell me we'll have to wait another month till the next episode! It s been killing me what you've been up to and how far you've gotten! I love this series and such a cool build!
Over a month and I feel this episode didn’t really contain much. Here’s hoping it’s not a long wait again!
@@AlexNicol2890be patient lol do you even understand how long shit like this takes and the money? I think your on the wrong channel bud support only hatters get shammed
Ah yes, My comment is the pinnacle of hating......@@LedSlinga
you must be a new Tavarish subscriber, I guess.
@@AlexNicol2890 i mean he was at Goodwood and money is a tough thing to magically pull from thin air, patience is key but im just happy the project is still alive, some car channels just straight up abandon their projects.
Such an amazing build Tavarish and crew so sweet watching it come back to life and better too, you'll knock it out of the park. Best wishes to one and all 😀
LET'S GOOOOO!!!!!!! My favorite series on RUclips!!
You and the wonderous mat Armstrong are the only things I get excited for on yt. Keep it up tav
Absolutely incredible. Cannot wait to see it done. Tavarish, you are a mad man. Love that you are the only person crazy enough to do it and you are one of the only people that can pull it off. Kudos to you
i discovered this series through the algo and binged it all in two nights. soooo interesting. can't wait for next episode.
This build has been amazing. Hope this ends well.
I'm more worried with the electrical components
This P1 will look soooo good ! Can't wait to see the final result !
edit: the carbon repair is mind blowing. This guy is a master at his craft. Also, can't wait to see the engine rebuild. That's wild, to have grooves like that on the main bearings after only 300 miles. One could think McLaren only builds garage queens.
@@richpolecat6527 he was the one who put the marvel mystery oil in. Watch the other videos before you say something and look stupid.
Watching this series is incredible, the sheer volume of moving parts going into this project would make me run for the hills, but Freddy and team are doing great.
When my R63 breaks (almost every roadtrip) and I'm sitting in my hotel contemplating my life choices, I'm always watching this series and feeling a little better. The Pievo will one day run, and so will my car. Pray.
The absolute best series on RUclips. Even my 3 and 5 year old siblings watch it with me👍🏼👍🏼
I was disappointed to not see updates in a while, but man this episode delivered some good stuff! Keep it up! I know me and a few friends that arent even car guys are rooting for you!
It’s a mega project so progress is slow at times when depending on various skilled groups to work through their workload.
That P1 GT's paint job was so good.
Ive done some carbon fiber work on aircraft. This is a whole different level... you definitely found the right guys for the job.
Dude I love the fact that your wearing a Demo shirt - always giving back man that’s what makes you great
I love how this Rebuild series is coming. I remember when it first launched I was unemployed and doing not so good but now I have my own million dollar car collection and I'm a grandfather to 20 grand-children.
Teach me the way sensei
The combination of the yellow hood (Frunk) and the black carbon fiber looks wicked! It reminds me of a Yellow Jacket Wasp. NICE. Keep up the good work.
Ive been sat on the edge of my bed waiting for this video! Constantly checking youtube, rewatched all previous videos for this project!
Welcome back Travarish....That was a long wait but worth it! Keep on posting, very excited to see the P1 coming together.
Found your channel while sick at home with COVID. Great stuff. Loved the 675LT and now the P1 rebuilds!
Great Series! Thank you!
Wow, the progress you've made on restoring this flooded McLaren P1 is absolutely mind-blowing! It's incredible to see the dedication and expertise that goes into bringing such a high-value and sophisticated car back to life.
O Frame Doctor merece todo respeito do mundo. O cara se garante demais!
O cara é pica!
@@JacobruxoThe guy is pizza!
@@epicswirlkkkkkkkkkk
Pretty impressed about the level of project management that has gone into this job. Would like to see a video about that at some point.
This is by far the craziest build ever the work and man hours going into this P1 is insane
I hope McLaren are watching this 😊
This is absolutely crazy. You’re killin it. I can’t believe Ed thought you took on more than you can handle. Cause you handlin it!
Let the show begin.
I can’t wait for this project to be finished and see it driven down the road in all it’s exposed carbon fiber greatness
Excellent episode, stoked to see more in the future!
It's sooo frustrating that we have to wait so long between videos but, it's understood with a project of this scale. The moment I see a new one drop I have to watch it so it's working! Heavily invested in this series and cannot wait to see the car in full body and see what you have in store with the engine
cant wait to see the Leno episode with the 675lt, cant wait for the speedtail motor and other mods
Jack's "👋😃 Hi guys!" is entirely wholesome.
The bearing scoring is good ol British technology
Yey! Freddie & the P1EVO are back!! Keep up the awesome work love from the U.K 🇬🇧 this cars going to be so frickin cool!!!!!!
Can't wait for the body to get fully worked out and same for that poor engine. Really sad to see how damaged it got just within a couple days being in the water but when you hit a low, there's always that urge to bite back harder. Very excited to see where you end up with this car!
the scoring inside the engine after 300 miles is mind boggling.... what a fussy car! i mean, to make this a daily driver it would pretty much be in the shop at least once a month it feels like after watching this series
by far best build series on YT.... the front looks amazing
The frame doctor did an amazing job again. 👏
I love the mix of the GT and road car look as well.
The journey so far has been amazing. Thank you so much, Tavarish.
I absolutely loved this, binged watched it in 2 days.
Well done lads, just brilliant and a little insane, not sure how you sleep at night, thanks for the content so far, can't wait to see it carrying on.😍😍😍😍
Love this content mate! Keep it up! Would love to see longer videos or more if possible
I've been waiting patiently for weeks now! Lets go! Thank you Tarvarish for all these inspirational and amazing videos that have taught me so much! 🙏
Heck yeah baby!! Finally some real progress on the P1!!
Guy's a genius with those repairs, not a simple job in the slightest.
Love these big rebuild projects dude, it's pure joy to watch
Fantastic to see more uploads about the p1 build again. Keep them coming please 😊
PART 9 WAITING ROOM!
2 weeks now waiting on the next video u need to understand we’re emotionally invested in this!!!
This series is so awesome but even cooler is it seems the guys are having a lot of fun while doing it.
The smile on Joeys face as hes admiring his work is pure magic.... ❤
I love these updates! Thank you!
Can't wait to see the P1 back to life. Keep focused Freddy. You got this!
Woooh my favorite series on RUclips is back :) I know it takes a loooooot of work but I always love when Tavarish uploads
GREAT work, Tavarish. Your efforts are beginning to pay off. What was very disappointing to me was seeing what poor parts were put into that engine. C'MON, McLaren!