Good work, Brian. You’re right, it does look just a bit better with the spacers. Those red side mirrors…I must have missed that video if there was one. You’re doing a great job on the Supra! 👍❤️
@@donaldprince7853 Thatd be a fine setup. But 15 all around was pretty flush with no rubbing. We have these on our site and they ship quick! www.brosfourrspeed.com
Just a good round number. I saw some people post about 15mm all around being perfect. I don’t think 2mm will be noticeable. It these look perfect with stock wheels! Manual Supra is worth it! Hope you get one 😎
@@BrosFOURRSpeed gotcha thanks for the explanation. Thanks man I’m just really struggling to find any in my area. The only promising one sold the day it arrived for 7k over sticker. Trying my best 🙏
@@julianmaza1489 Try the out-of-state dealers. I was in the same boat. All dealers in my area were charging at least 3k over, and I ended up finding one out-of-state at MSRP. Even with shipping it's still much cheaper.
@@julianmaza1489 yeah I feel the same. But for the manual Supra, it's very unlikely you will find one sitting on the lot and available for test drives. All of them as far as I know are sold before they come.
@@R0cket_Rabbit I mean 15mm change is such a minimal difference. The same thing can be said if you gain 50lbs or use different rims. The logic just doesn't really make much sense.
Something like these with correct logs you’ll be good. I wouldn’t do 25mm+ on track tho just in case. And certainly don’t run non hub centric. But a good set of H&R with correct bolts you’ll be good and get better handling
Honestly it won't make a difference. 15mm was perfect with no rubbing sitting on H&R springs. brosfourrspeed.com/parts-%26-merchandise/ols/products/hr-trak-wheel-spacer
Spacers like these, no different then a same width wheel with a 15mm more aggressive offset. Get hub centric with proper bolts if needed and you'll be good.
@@BrosFOURRSpeed thanks, wanted to know if this was oem suspension height, since car looks different on the same set of spacers when lowered vs oem height.
CS Here Again Dude Again Maybe I Am Really A Huge Fan One Of GR Supra Videos Also Mod GR Supra Videos Also As Well Also One Day I Am Want To You In The Near Future Some Painted Calipers Just Like You Did Last Time With The 2020 Toyota GR Supra Like White Also Some BREMBO Painted Calipers As Well Also Some Forged VOSSEN Wheels Also A Duck Bill Wing In The Trunk Also Like The Carbon Fiber Stuff Maybe In About For These Months Coming Years Maybe Dude I Hope I Am A Huge Fan Of Them.
The car in direct sunlight looks awesome!. I could also see some drilled/slotted rotors.
It does!
Good work, Brian. You’re right, it does look just a bit better with the spacers. Those red side mirrors…I must have missed that video if there was one. You’re doing a great job on the Supra! 👍❤️
Thanks 👍 I made a short on the mirrors!
I need the Supra first 🫡
U got it 🤙🏽
I’ve been waiting over a year for my local dealer to call about buying one. Lol
Lol you can get some good used ones these days!
@@Barbwire710some good used ones out there!
mines should get here in about a week in a half so hyped
I just put a deposit down for a Supra so your videos have been great to watch as I wait!
That’s awesome!! You’ll love it! Such good cars for the money!
Nice! Im thinking about doing the same. Did they give you any timeframe?
@@michaeld5198 Yeah about two months. Working with dealerships is always such a pain.
Next mod for my 23 too…. I was toying with 13’s up front but the 15’s all round do look good! I love the stock rims too.
Nice! Yeah I doubt 2mm is noticeable. But these look perfect all around for sure. Even when lowered they sit well!
That made it look perfect.
So good looking for sure!
Nice! I remember back when you put spacers on your Genesis and I got the same ones. Supra will look good with a drop now!
Oh cool! And yeah it does!
@@BrosFOURRSpeed had 15 up front and 20 in the rear on my Genesis. think I will do the same for my 24 MT Supra
@@donaldprince7853 Thatd be a fine setup. But 15 all around was pretty flush with no rubbing. We have these on our site and they ship quick! www.brosfourrspeed.com
I hear that a lot of people run 13mm up front. What made you go with 15? Great video keep up the content cause I’m trying to get a manual soon.
Just a good round number. I saw some people post about 15mm all around being perfect. I don’t think 2mm will be noticeable. It these look perfect with stock wheels!
Manual Supra is worth it! Hope you get one 😎
@@BrosFOURRSpeed gotcha thanks for the explanation. Thanks man I’m just really struggling to find any in my area. The only promising one sold the day it arrived for 7k over sticker. Trying my best 🙏
@@julianmaza1489 Try the out-of-state dealers. I was in the same boat. All dealers in my area were charging at least 3k over, and I ended up finding one out-of-state at MSRP. Even with shipping it's still much cheaper.
@@allenyao552 i was thinking about it but I hate the idea of buying a car I’ve never seen or test driven.
@@julianmaza1489 yeah I feel the same. But for the manual Supra, it's very unlikely you will find one sitting on the lot and available for test drives. All of them as far as I know are sold before they come.
I track my Supra with stock wheels. Would spacers adversely affect performance on the track?
no they are completely fine to run on track, just make sure u torque them up to spec before each track day
Also keep in mind, spacers will put wear and tear quicker on your wheel bearings.
@@R0cket_Rabbit yes that is very true, i just more safety reasons. the maintenance will be more
@@R0cket_Rabbit I mean 15mm change is such a minimal difference. The same thing can be said if you gain 50lbs or use different rims. The logic just doesn't really make much sense.
Something like these with correct logs you’ll be good. I wouldn’t do 25mm+ on track tho just in case. And certainly don’t run non hub centric. But a good set of H&R with correct bolts you’ll be good and get better handling
Can you do lowering springs with these spacers?
Yup! Stay tuned for that! 😆
I would never get wheel spacers, but the wheels on the supra are really in there
Nothing wrong with good spacers. Yeah stock they look silly so far in the fender
Great video man! Is it recommended to get alignment done after installing spacers?
No, since it doesn’t effect alignment specs that wouldn’t be needed.
Where did you get the rock guards?
brosfourrspeed.com/parts-%26-merchandise/ols/categories/toyota-supra-parts
Here you go! We have plenty of parts available!
Ughhh I can’t decide on 13mm in the front, or 15mm in the front. I’m definitely doing 15mm in the rear but so indecisive on the front.
Honestly it won't make a difference. 15mm was perfect with no rubbing sitting on H&R springs. brosfourrspeed.com/parts-%26-merchandise/ols/products/hr-trak-wheel-spacer
Would you go with burger motorsport spacers?
Were you on stock ride height?
This video yes. But then I added H&R springs. Perfect setup my mid! Let us know if you want to order anything!
Thanks bro, I'll check your website
Do these fit the 2020supra?
Yes they do! All the same bolt pattern
Hey man im just curious. Are wheel spacers safe? Won't it strain or add pressure to other parts of the car?
Spacers like these, no different then a same width wheel with a 15mm more aggressive offset. Get hub centric with proper bolts if needed and you'll be good.
Hey Brian, 15mm front and 20mm back or 20mm front and 25mm back?
15mm up front and 20mm in back would be a solid setup. 15mm all around was great too!
I buy a Supra first and then I will get it bro.
Nice! Make it happen
Would these spacers work for a 2017 Lexus Is200t? Been trying to find quality spacers for my Lexus but the options are very limited
Doesn't look like H&R makes them for the IS. But contact Fitment Industries. They can probably source you a quality set!
You can also try Ichiba wheel spacers for your IS, thats what I used to run on my 2014 lexus is350 before i got wheels for it
This is a stock suspension height, no lower springs, correct?
This was stock but I then did H&R springs. Dialed it in perfectly
@@BrosFOURRSpeed thanks, wanted to know if this was oem suspension height, since car looks different on the same set of spacers when lowered vs oem height.
@@arturpytel9940 Yeah this is a great setup. We have all these on our website www.brosfourrrspeed.com
CS Here Again Dude Again Maybe I Am Really A Huge Fan One Of GR Supra Videos Also Mod GR Supra Videos Also As Well Also One Day I Am Want To You In The Near Future Some Painted Calipers Just Like You Did Last Time With The 2020 Toyota GR Supra Like White Also Some BREMBO Painted Calipers As Well Also Some Forged VOSSEN Wheels Also A Duck Bill Wing In The Trunk Also Like The Carbon Fiber Stuff Maybe In About For These Months Coming Years Maybe Dude I Hope I Am A Huge Fan Of Them.
Thanks for checking out the video! Fun mods!
Is spacers legal?
As far as I know. I wouldn't worry about it unless you live in Californian. Everything is illegal there
How tight nm?
Same torque specs you should do on the wheels without them. About 80 pounds is all you need on most cars across the board
Now car go faster ?
Maybe! lol
@@BrosFOURRSpeed jk bro can ur links me the space please .I probably go 20mm on the rears.